- 10 May, 2021 40 commits
-
-
Stefan Wahren authored
Replace the custom set of return values with proper Linux error codes for the following functions: vchiq_use_internal() vchiq_release_internal() vchiq_use_service_internal() vchiq_release_service_internal() Now we can use the result directly as return value for vchiq_ioctl(). Reviewed-by:
Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1619347863-16080-9-git-send-email-stefan.wahren@i2se.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Wahren authored
Replace the custom set of return values with proper Linux error codes. As a result we need to initialize vchiq_status in vchiq_init_state. Reviewed-by:
-
Stefan Wahren authored
The function vchiq_arm_init_state() cannot fail. So drop the return value and the unnecessary code. Reviewed-by:
-
Stefan Wahren authored
There is no modification to the vchiq_status before the first if, so drop this unnecessary check. Reviewed-by:
-
Stefan Wahren authored
Nesting multiple ternary operators over multiple lines isn't easy to read. Move this logic into a separate inline function. Reviewed-by:
-
Stefan Wahren authored
Avoid the multiline statement for notify_bulks by return early in error case. Reviewed-by:
-
Stefan Wahren authored
The logic in VCHIQ_SRVSTATE_OPEN* is unnecessary complex. Handle the error case of queue_message() first makes it easier to read. Btw we get the rid of the checkpatch warning: WARNING: else is not generally useful after a break or return Reviewed-by:
-
Stefan Wahren authored
Using BUG_ON in a non-essential driver isn't recommend. So better trigger a stacktrace and bailout. Reviewed-by:
-
Colin Ian King authored
The variable txresult is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210422112046.245144-1-colin.king@canonical.comSigned-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function ‘CardDisableRTL8723BSdio’: drivers/staging/rtl8723bs/hal/sdio_halinit.c:881:5: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function ‘CardDisableRTL8723BSdio’: drivers/staging/rtl8723bs/hal/sdio_halinit.c:881:5: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function ‘CardDisableRTL8723BSdio’: drivers/staging/rtl8723bs/hal/sdio_halinit.c:881:5: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function ‘CardDisableRTL8723BSdio’: drivers/staging/rtl8723bs/hal/sdio_halinit.c:881:5: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function ‘CardDisableRTL8723BSdio’: drivers/staging/rtl8723bs/hal/sdio_halinit.c:881:5: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fabio Aiuto <fabioaiuto83@gmail.com> Cc: Stanley@BB.SD3 Cc: linux-staging@lists.linux.dev Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210414181129.1628598-58-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/core/rtw_mlme_ext.c: In function ‘issue_probersp’: drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:2543:1: warning: the frame size of 1096 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c: In function ‘odm_InbandNoise_Monitor_NSeries’: drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c:32:18: warning: variable ‘func_start’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Marco Cesati <marcocesati@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/axis-fifo/axis-fifo.c:356: warning: expecting prototype for axis_fifo_write(). Prototype was for axis_fifo_read() instead Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jacob Feder <jacobsfeder@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c: In function ‘_cfg80211_rtw_mgmt_tx’: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2754:7: warning: variable ‘ack’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
'err' is only used if debug is enabled. Also remove 4 year old TODO. Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/hal/sdio_ops.c: In function ‘sdio_read32’: drivers/staging/rtl8723bs/hal/sdio_ops.c:170:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/hal/sdio_ops.c: In function ‘sdio_read_mem’: drivers/staging/rtl8723bs/hal/sdio_ops.c:381:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fabio Aiuto <fabioaiuto83@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
... and fix a misnamed param. Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:53: warning: expecting prototype for PHY_QueryBBReg(). Prototype was for PHY_QueryBBReg_8723B() instead drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:87: warning: expecting prototype for PHY_SetBBReg(). Prototype was for PHY_SetBBReg_8723B() instead drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:252: warning: Function parameter or member 'RegAddr' not described in 'PHY_QueryRFReg_8723B' drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:252: warning: expecting prototype for PHY_QueryRFReg(). Prototype was for PHY_QueryRFReg_8723B() instead drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:285: warning: expecting prototype for PHY_SetRFReg(). Prototype was for PHY_SetRFReg_8723B() instead Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: karthik alapati <mail@karthek.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8188eu/os_dep/mon.c:21: warning: Function parameter or member 'skb' not described in 'unprotect_frame' drivers/staging/rtl8188eu/os_dep/mon.c:21: warning: Function parameter or member 'iv_len' not described in 'unprotect_frame' drivers/staging/rtl8188eu/os_dep/mon.c:21: warning: Function parameter or member 'icv_len' not described in 'unprotect_frame' drivers/staging/rtl8188eu/os_dep/mon.c:75: warning: Function parameter or member 'dev' not described in 'rtl88eu_mon_recv_hook' drivers/staging/rtl8188eu/os_dep/mon.c:75: warning: Function parameter or member 'frame' not described in 'rtl88eu_mon_recv_hook' drivers/staging/rtl8188eu/os_dep/mon.c:108: warning: Function parameter or member 'dev' not described in 'rtl88eu_mon_xmit_hook' drivers/staging/rtl8188eu/os_dep/mon.c:108: warning: Function parameter or member 'frame' not described in 'rtl88eu_mon_xmit_hook' drivers/staging/rtl8188eu/os_dep/mon.c:108: warning: Function parameter or member 'frag_len' not described in 'rtl88eu_mon_xmit_hook' Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c: In function ‘odm_InbandNoise_Monitor_NSeries’: drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c:32:34: warning: variable ‘func_end’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Marco Cesati <marcocesati@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/core/rtw_ieee80211.c:889: warning: expecting prototype for ieee802_11_parse_elems(). Prototype was for rtw_ieee802_11_parse_elems() instead Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/fbtft/fb_ili9320.c: In function ‘read_devicecode’: drivers/staging/fbtft/fb_ili9320.c:25:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function ‘translate_scan’: drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:310:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/staging/rtl8723bs/os_dep/ioctl_linux.c: In function ‘rtw_wx_set_mlme’: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:1128:6: warning: variable ‘reason’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/os_dep/ioctl_linux.c: In function ‘rtw_dbg_port’: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:2548:33: warning: variable ‘preorder_ctrl’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:2573:33: warning: variable ‘preorder_ctrl’ set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:36:27: warning: ‘iw_operation_mode’ defined but not used [-Wunused-const-variable=] Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/axis-fifo/axis-fifo.c:356: warning: Function parameter or member 'f' not described in 'axis_fifo_read' drivers/staging/axis-fifo/axis-fifo.c:356: warning: Function parameter or member 'buf' not described in 'axis_fifo_read' drivers/staging/axis-fifo/axis-fifo.c:356: warning: Function parameter or member 'len' not described in 'axis_fifo_read' drivers/staging/axis-fifo/axis-fifo.c:356: warning: Function parameter or member 'off' not described in 'axis_fifo_read' drivers/staging/axis-fifo/axis-fifo.c:356: warning: expecting prototype for axis_fifo_write(). Prototype was for axis_fifo_read() instead drivers/staging/axis-fifo/axis-fifo.c:478: warning: Function parameter or member 'f' not described in 'axis_fifo_write' drivers/staging/axis-fifo/axis-fifo.c:478: warning: Function parameter or member 'buf' not described in 'axis_fifo_write' drivers/staging/axis-fifo/axis-fifo.c:478: warning: Function parameter or member 'len' not described in 'axis_fifo_write' drivers/staging/axis-fifo/axis-fifo.c:478: warning: Function parameter or member 'off' not described in 'axis_fifo_write' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "John B. Wyatt IV" <jbwyatt4@gmail.com> Cc: Jacob Feder <jacobsfeder@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/most/dim2/hal.c:99: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'buf_size' not described in 'dim_norm_isoc_buffer_size' drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'packet_length' not described in 'dim_norm_isoc_buffer_size' drivers/staging/most/dim2/hal.c:788: warning: expecting prototype for Retrieves maximal possible correct buffer size for isochronous data type(). Prototype was for dim_norm_isoc_buffer_size() instead drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'buf_size' not described in 'dim_norm_sync_buffer_size' drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'bytes_per_frame' not described in 'dim_norm_sync_buffer_size' drivers/staging/most/dim2/hal.c:802: warning: expecting prototype for Retrieves maximal possible correct buffer size for synchronous data type(). Prototype was for dim_norm_sync_buffer_size() instead Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/most/dim2/hal.c:99: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'buf_size' not described in 'dim_norm_isoc_buffer_size' drivers/staging/most/dim2/hal.c:788: warning: Function parameter or member 'packet_length' not described in 'dim_norm_isoc_buffer_size' drivers/staging/most/dim2/hal.c:788: warning: expecting prototype for Retrieves maximal possible correct buffer size for isochronous data type(). Prototype was for dim_norm_isoc_buffer_size() instead drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'buf_size' not described in 'dim_norm_sync_buffer_size' drivers/staging/most/dim2/hal.c:802: warning: Function parameter or member 'bytes_per_frame' not described in 'dim_norm_sync_buffer_size' drivers/staging/most/dim2/hal.c:802: warning: expecting prototype for Retrieves maximal possible correct buffer size for synchronous data type(). Prototype was for dim_norm_sync_buffer_size() instead Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/most/i2c/i2c.c:66: warning: Function parameter or member 'most_iface' not described in 'configure_channel' drivers/staging/most/i2c/i2c.c:66: warning: Function parameter or member 'ch_idx' not described in 'configure_channel' drivers/staging/most/i2c/i2c.c:66: warning: Excess function parameter 'iface' description in 'configure_channel' drivers/staging/most/i2c/i2c.c:66: warning: Excess function parameter 'channel' description in 'configure_channel' drivers/staging/most/i2c/i2c.c:121: warning: Function parameter or member 'most_iface' not described in 'enqueue' drivers/staging/most/i2c/i2c.c:121: warning: Function parameter or member 'ch_idx' not described in 'enqueue' drivers/staging/most/i2c/i2c.c:121: warning: Excess function parameter 'iface' description in 'enqueue' drivers/staging/most/i2c/i2c.c:121: warning: Excess function parameter 'channel' description in 'enqueue' drivers/staging/most/i2c/i2c.c:166: warning: Function parameter or member 'most_iface' not described in 'poison_channel' drivers/staging/most/i2c/i2c.c:166: warning: Function parameter or member 'ch_idx' not described in 'poison_channel' drivers/staging/most/i2c/i2c.c:166: warning: Excess function parameter 'iface' description in 'poison_channel' drivers/staging/most/i2c/i2c.c:166: warning: Excess function parameter 'channel_id' description in 'poison_channel' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/core/rtw_mlme.c: In function ‘rtw_joinbss_event_prehandle’: drivers/staging/rtl8723bs/core/rtw_mlme.c:1192:12: warning: variable ‘retry’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fabio Aiuto <fabioaiuto83@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/core/rtw_ieee80211.c: In function ‘rtw_ies_remove_ie’: drivers/staging/rtl8723bs/core/rtw_ieee80211.c:259:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Also demote merely half-complete header. Fixes the following W=1 kernel build warning(s): drivers/staging/most/dim2/dim2.c:69: warning: Function parameter or member 'name' not described in 'hdm_channel' drivers/staging/most/dim2/dim2.c:69: warning: Function parameter or member 'reset_dbr_size' not described in 'hdm_channel' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'dev' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'name' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'clk_speed' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'clk' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'clk_pll' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'bus' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'on_netinfo' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:104: warning: Function parameter or member 'disable_platform' not described in 'dim2_hdm' drivers/staging/most/dim2/dim2.c:440: warning: Function parameter or member 'most_iface' not described in 'configure_channel' drivers/staging/most/dim2/dim2.c:440: warning: Function parameter or member 'ch_idx' not described in 'configure_channel' drivers/staging/most/dim2/dim2.c:440: warning: Function parameter or member 'ccfg' not described in 'configure_channel' drivers/staging/most/dim2/dim2.c:440: warning: Excess function parameter 'iface' description in 'configure_channel' drivers/staging/most/dim2/dim2.c:440: warning: Excess function parameter 'channel' description in 'configure_channel' drivers/staging/most/dim2/dim2.c:440: warning: Excess function parameter 'channel_config' description in 'configure_channel' drivers/staging/most/dim2/dim2.c:558: warning: Function parameter or member 'most_iface' not described in 'enqueue' drivers/staging/most/dim2/dim2.c:558: warning: Function parameter or member 'ch_idx' not described in 'enqueue' drivers/staging/most/dim2/dim2.c:558: warning: Excess function parameter 'iface' description in 'enqueue' drivers/staging/most/dim2/dim2.c:558: warning: Excess function parameter 'channel' description in 'enqueue' drivers/staging/most/dim2/dim2.c:591: warning: Function parameter or member 'most_iface' not described in 'request_netinfo' drivers/staging/most/dim2/dim2.c:591: warning: Function parameter or member 'ch_idx' not described in 'request_netinfo' drivers/staging/most/dim2/dim2.c:591: warning: Function parameter or member 'on_netinfo' not described in 'request_netinfo' drivers/staging/most/dim2/dim2.c:591: warning: Excess function parameter 'iface' description in 'request_netinfo' drivers/staging/most/dim2/dim2.c:591: warning: Excess function parameter 'channel_id' description in 'request_netinfo' drivers/staging/most/dim2/dim2.c:631: warning: Function parameter or member 'most_iface' not described in 'poison_channel' drivers/staging/most/dim2/dim2.c:631: warning: Function parameter or member 'ch_idx' not described in 'poison_channel' drivers/staging/most/dim2/dim2.c:631: warning: Excess function parameter 'iface' description in 'poison_channel' drivers/staging/most/dim2/dim2.c:631: warning: Excess function parameter 'channel_id' description in 'poison_channel' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nícolas F. R. A. Prado" <nfraprado@protonmail.com> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_rx_frame_softmac’: drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2009:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Romain Perier <romain.perier@gmail.com> Cc: Allen Pais <apais@linux.microsoft.com> Cc: Andrea Merello <andrea.merello@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
The variable is used in the function using the macro. Fixes the following W=1 kernel build warning(s): drivers/staging/vt6655/upc.h:45:16: warning: variable ‘byData’ set but not used [-Wunused-but-set-variable] Cc: Forest Bond <forest@alittletooquiet.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/most/net/net.c:548: warning: Function parameter or member 'iface' not described in 'on_netinfo' drivers/staging/most/net/net.c:548: warning: Function parameter or member 'link_stat' not described in 'on_netinfo' drivers/staging/most/net/net.c:548: warning: Function parameter or member 'mac_addr' not described in 'on_netinfo' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/sm750fb/sm750_accel.c:155: warning: Function parameter or member 'accel' not described in 'sm750_hw_copyarea' drivers/staging/sm750fb/sm750_accel.c:155: warning: expecting prototype for sm750_hm_copyarea(). Prototype was for sm750_hw_copyarea() instead drivers/staging/sm750fb/sm750_accel.c:321: warning: Function parameter or member 'accel' not described in 'sm750_hw_imageblit' Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-fbdev@vger.kernel.org Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/fwserial/fwserial.c:52: warning: Function parameter or member 'fwserial_list' not described in 'LIST_HEAD' drivers/staging/fwserial/fwserial.c:52: warning: expecting prototype for fwserial_list(). Prototype was for LIST_HEAD() instead drivers/staging/fwserial/fwserial.c:62: warning: cannot understand function prototype: 'struct fwtty_port *port_table[MAX_TOTAL_PORTS]; ' drivers/staging/fwserial/fwserial.c:295: warning: Function parameter or member 'port' not described in 'fwtty_update_port_status' drivers/staging/fwserial/fwserial.c:295: warning: Function parameter or member 'status' not described in 'fwtty_update_port_status' drivers/staging/fwserial/fwserial.c:388: warning: Function parameter or member 'port' not described in '__fwtty_port_line_status' drivers/staging/fwserial/fwserial.c:412: warning: Function parameter or member 'port' not described in '__fwtty_write_port_status' drivers/staging/fwserial/fwserial.c:433: warning: Function parameter or member 'port' not described in 'fwtty_write_port_status' drivers/staging/fwserial/fwserial.c:486: warning: Function parameter or member 'work' not described in 'fwtty_do_hangup' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'card' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'request' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'tcode' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'destination' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'source' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'generation' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'addr' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'data' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'len' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Function parameter or member 'callback_data' not described in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:605: warning: Excess function parameter 'parameters' description in 'fwtty_port_handler' drivers/staging/fwserial/fwserial.c:670: warning: Function parameter or member 'card' not described in 'fwtty_tx_complete' drivers/staging/fwserial/fwserial.c:670: warning: Function parameter or member 'rcode' not described in 'fwtty_tx_complete' drivers/staging/fwserial/fwserial.c:670: warning: Function parameter or member 'txn' not described in 'fwtty_tx_complete' drivers/staging/fwserial/fwserial.c:914: warning: Function parameter or member 'tty_port' not described in 'fwtty_port_carrier_raised' drivers/staging/fwserial/fwserial.c:1021: warning: Function parameter or member 'tty_port' not described in 'fwtty_port_shutdown' drivers/staging/fwserial/fwserial.c:1312: warning: Function parameter or member 'tty' not described in 'fwtty_break_ctl' drivers/staging/fwserial/fwserial.c:1312: warning: Function parameter or member 'state' not described in 'fwtty_break_ctl' drivers/staging/fwserial/fwserial.c:1681: warning: Function parameter or member 'peer' not described in 'fwserial_claim_port' drivers/staging/fwserial/fwserial.c:1681: warning: Function parameter or member 'index' not described in 'fwserial_claim_port' drivers/staging/fwserial/fwserial.c:1708: warning: Function parameter or member 'peer' not described in 'fwserial_find_port' drivers/staging/fwserial/fwserial.c:1775: warning: Function parameter or member 'peer' not described in 'fwserial_connect_peer' drivers/staging/fwserial/fwserial.c:1844: warning: Function parameter or member 'driver' not described in 'fwserial_close_port' drivers/staging/fwserial/fwserial.c:1844: warning: Function parameter or member 'port' not described in 'fwserial_close_port' drivers/staging/fwserial/fwserial.c:1911: warning: Function parameter or member 'card' not described in '__fwserial_peer_by_node_id' drivers/staging/fwserial/fwserial.c:1911: warning: Function parameter or member 'generation' not described in '__fwserial_peer_by_node_id' drivers/staging/fwserial/fwserial.c:1911: warning: Function parameter or member 'id' not described in '__fwserial_peer_by_node_id' drivers/staging/fwserial/fwserial.c:2090: warning: Function parameter or member 'peer' not described in 'fwserial_remove_peer' drivers/staging/fwserial/fwserial.c:2321: warning: Function parameter or member 'unit' not described in 'fwserial_probe' drivers/staging/fwserial/fwserial.c:2321: warning: Function parameter or member 'id' not described in 'fwserial_probe' drivers/staging/fwserial/fwserial.c:2344: warning: Function parameter or member 'unit' not described in 'fwserial_remove' drivers/staging/fwserial/fwserial.c:2382: warning: Function parameter or member 'unit' not described in 'fwserial_update' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'card' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'request' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'tcode' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'destination' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'source' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'generation' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'addr' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'data' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'len' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Function parameter or member 'callback_data' not described in 'fwserial_mgmt_handler' drivers/staging/fwserial/fwserial.c:2717: warning: Excess function parameter 'parameters' description in 'fwserial_mgmt_handler' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Add comments to preserve documentation. Fixes the following W=1 kernel build warning(s): drivers/staging/ks7010/ks_hostif.c: In function ‘hostif_mib_get_confirm’: drivers/staging/ks7010/ks_hostif.c:528:6: warning: variable ‘mib_val_type’ set but not used [-Wunused-but-set-variable] drivers/staging/ks7010/ks_hostif.c:527:6: warning: variable ‘mib_val_size’ set but not used [-Wunused-but-set-variable] drivers/staging/ks7010/ks_hostif.c: In function ‘hostif_infrastructure_set_confirm’: drivers/staging/ks7010/ks_hostif.c:849:6: warning: variable ‘result_code’ set but not used [-Wunused-but-set-variable] drivers/staging/ks7010/ks_hostif.c: In function ‘hostif_phy_information_confirm’: drivers/staging/ks7010/ks_hostif.c:929:19: warning: variable ‘noise’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/nvec/nvec.c:109: warning: Function parameter or member 'events' not described in 'nvec_register_notifier' drivers/staging/nvec/nvec.c:136: warning: Function parameter or member 'nb' not described in 'nvec_status_notifier' drivers/staging/nvec/nvec.c:136: warning: Function parameter or member 'event_type' not described in 'nvec_status_notifier' drivers/staging/nvec/nvec.c:136: warning: Function parameter or member 'data' not described in 'nvec_status_notifier' drivers/staging/nvec/nvec.c:358: warning: Function parameter or member 'ev' not described in 'nvec_event_mask' drivers/staging/nvec/nvec.c:358: warning: Function parameter or member 'mask' not described in 'nvec_event_mask' Cc: Marc Dietrich <marvin24@gmx.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Kernel Team <ac100@lists.lauchpad.net> Cc: Pierre-Hugues Husson <phhusson@free.fr> Cc: Ilya Petrov <ilya.muromec@gmail.com> Cc: Andres Klode <jak@jak-linux.org> Cc: ac100@lists.launchpad.net Cc: linux-tegra@vger.kernel.org Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Also demote kernel-doc abuses Fixes the following W=1 kernel build warning(s): drivers/staging/iio/frequency/ad9834.c:87: warning: Function parameter or member 'devid' not described in 'ad9834_state' drivers/staging/iio/frequency/ad9834.c:93: warning: cannot understand function prototype: 'enum ad9834_supported_device_ids ' drivers/staging/iio/frequency/ad9834.c:320: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-iio@vger.kernel.org Cc: linux-staging@lists.linux.dev Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8712/rtl871x_mp_ioctl.c: In function ‘mp_start_test’: drivers/staging/rtl8712/rtl871x_mp_ioctl.c:204:1: warning: the frame size of 1136 bytes is larger than 1024 bytes [-Wframe-larger-than=] Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Cc: Michael Straube <straube.linux@gmail.com> Cc: WLAN FAE <wlanfae@realtek.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/core/rtw_wlan_util.c: In function ‘process_addba_req’: drivers/staging/rtl8723bs/core/rtw_wlan_util.c:1774:11: warning: variable ‘start_seq’ set but not used [-Wunused-but-set-variable] from drivers/staging/rtl8188eu/core/rtw_wlan_util.c:12: Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/octeon/ethernet-tx.c:507: warning: bad line: Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/staging/rtl8723bs/core/rtw_sta_mgt.c: In function ‘rtw_init_bcmc_stainfo’: drivers/staging/rtl8723bs/core/rtw_sta_mgt.c:512:6: warning: variable ‘res’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ross Schmidt <ross.schm.dev@gmail.com> Cc: linux-staging@lists.linux.dev Signed-off-by:
-
