Misinterpreted intr_enable field name. Hence correct the structure
field name accordingly to reflect the functionality.

Fixes: f264481a ("HID: amd_sfh: Extend driver capabilities for multi-generation support")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since in the current amd_sfh design the sensor data is periodically
obtained in the form of poll data, during the suspend/resume cycle,
scheduling a delayed work adds no value.

So, cancel the work and restart back during the suspend/resume cycle
respectively.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch adds support for the UGTABLET WP5540 digitizer tablet
devices. Without it, the pen moves the cursor, but neither the
buttons nor the tap sensor in the tip do work.
Signed-off-by: Sergio Costas <rastersoft@gmail.com>
Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

ALS illuminance value present only in first 15 bits from SFH firmware
for V2 platforms. Hence added a mask of 15 bit to limit ALS max
illuminance values to get correct illuminance value.

Fixes: 0aad9c95 ("HID: amd_sfh: Extend ALS support for newer AMD platform")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HPD sensors take more time to initialize. Hence increasing sensor
command timeout to get response with status within a max timeout.

Fixes: 173709f5 ("HID: amd_sfh: Add command response to check command status")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

I'm was on the receiving end of a lockdep splat from this driver and after
scratching my head I couldn't be entirely sure it was a false positive
given we would also have to think about whether the regulator locking is
safe (since the notifier is called whilst holding regulator locks which
are also needed for regulator_is_enabled() ).

Regardless of whether it is a real bug or not, the mutex isn't needed.
We can use reference counting tricks instead to avoid races with the
notifier calls.

The observed splat follows:

------------------------------------------------------
kworker/u16:3/127 is trying to acquire lock:
ffff00008021fb20 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}, at: ihid_goodix_vdd_notify+0x30/0x94

but task is already holding lock:
ffff0000835c60c0 (&(&rdev->notifier)->rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x30/0x70

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&rdev->notifier)->rwsem){++++}-{4:4}:
       down_write+0x68/0x8c
       blocking_notifier_chain_register+0x54/0x70
       regulator_register_notifier+0x1c/0x24
       devm_regulator_register_notifier+0x58/0x98
       i2c_hid_of_goodix_probe+0xdc/0x158
       i2c_device_probe+0x25d/0x270
       really_probe+0x174/0x2cc
       __driver_probe_device+0xc0/0xd8
       driver_probe_device+0x50/0xe4
       __device_attach_driver+0xa8/0xc0
       bus_for_each_drv+0x9c/0xc0
       __device_attach_async_helper+0x6c/0xbc
       async_run_entry_fn+0x38/0x100
       process_one_work+0x294/0x438
       worker_thread+0x180/0x258
       kthread+0x120/0x130
       ret_from_fork+0x10/0x20

-> #0 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}:
       __lock_acquire+0xd24/0xfe8
       lock_acquire+0x288/0x2f4
       __mutex_lock+0xa0/0x338
       mutex_lock_nested+0x3c/0x5c
       ihid_goodix_vdd_notify+0x30/0x94
       notifier_call_chain+0x6c/0x8c
       blocking_notifier_call_chain+0x48/0x70
       _notifier_call_chain.isra.0+0x18/0x20
       _regulator_enable+0xc0/0x178
       regulator_enable+0x40/0x7c
       goodix_i2c_hid_power_up+0x18/0x20
       i2c_hid_core_power_up.isra.0+0x1c/0x2c
       i2c_hid_core_probe+0xd8/0x3d4
       i2c_hid_of_goodix_probe+0x14c/0x158
       i2c_device_probe+0x25c/0x270
       really_probe+0x174/0x2cc
       __driver_probe_device+0xc0/0xd8
       driver_probe_device+0x50/0xe4
       __device_attach_driver+0xa8/0xc0
       bus_for_each_drv+0x9c/0xc0
       __device_attach_async_helper+0x6c/0xbc
       async_run_entry_fn+0x38/0x100
       process_one_work+0x294/0x438
       worker_thread+0x180/0x258
       kthread+0x120/0x130
       ret_from_fork+0x10/0x20

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&rdev->notifier)->rwsem);
                               lock(&ihid_goodix->regulator_mutex);
                               lock(&(&rdev->notifier)->rwsem);
  lock(&ihid_goodix->regulator_mutex);

 *** DEADLOCK ***
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Fixes: 18eeef46 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When hid_parse() in elo_probe() fails, it forgets to call usb_put_dev to
decrease the refcount.

Fix this by adding usb_put_dev() in the error handling code of elo_probe().

Fixes: fbf42729 ("HID: elo: update the reference count of the usb device structure")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Markus reports that his 2011 MacBook with a German ISO keyboard (USB
product code 05ac:0246, HID country code 13) has the tilde key quirk.
Seeing as all of the standalone Apple ISO keyboards since about 2008
have the quirk, it seems reasonable to assume that once the integrated
laptop keyboards started having the quirk, they likewise never stopped
having it.
Reported-by: Markus Wageringel <markus.wageringel@gmail.com>
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.

This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.

Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.

This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 7fb0413b (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a747 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.

Later commits such as 7fb0413b (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a747 ("HID: wacom: generic: Support multiple tools per report")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The flag uhid->running can be set to false by uhid_device_add_worker()
without holding the uhid->devlock. Mark all reads/writes of the flag
that might race with READ_ONCE()/WRITE_ONCE() for clarity and
correctness.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

uhid has to run hid_add_device() from workqueue context while allowing
parallel use of the userspace API (which is protected with ->devlock).
But hid_add_device() can fail. Currently, that is handled by immediately
destroying the associated HID device, without using ->devlock - but if
there are concurrent requests from userspace, that's wrong and leads to
NULL dereferences and/or memory corruption (via use-after-free).

Fix it by leaving the HID device as-is in the worker. We can clean it up
later, either in the UHID_DESTROY command handler or in the ->release()
handler.

Cc: stable@vger.kernel.org
Fixes: 67f8ecc5 ("HID: uhid: fix timeout when probe races with IO")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Perform some minor cleanups on this driver. Include header files for
struct definitions that are used, drop a forward declaration that isn't
useful, and mark a sysfs attribute static as it isn't used outside this
file.

Cc: Sean O'Brien <seobrien@chromium.org>
Cc: Ting Shen <phoenixshen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.

Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.

[jkosina@suse.cz: microoptimize field->report->id to report->id]
Fixes: 14c9c014 ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Battery status on Elan tablet driver is reported for the HP ENVY x360
15t-dr100. There is no separate battery for the Elan controller resulting in a
battery level report of 0% or 1% depending on whether a stylus has interacted
with the screen. These low battery level reports causes a variety of bad
behavior in desktop environments. This patch adds the appropriate quirk to
indicate that the batery status is unused for this target.

Cc: stable@vger.kernel.org
Signed-off-by: Karl Kurbjun <kkurbjun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:
 "Highlights:

   - support for USI style pens (Tero Kristo, Mika Westerberg)

   - quirk for devices that need inverted X/Y axes (Alistair Francis)

   - small core code cleanups and deduplication (Benjamin Tissoires)

   - Apple Magic Keyboard support improvements (José Expósito, Alex
     Henrie, Benjamin Berg)

   - locking performance improvement for hidraw code (André Almeida)

   - PM wakeup support for i2c-hid driver (Matthias Kaehlcke

   - new driver to support for LetSketch device (Hans de Goede)

   - proper batter reporting for hid-magicmouse USB-connected devices
     (José Expósito)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (32 commits)
  HID: magicmouse: Fix an error handling path in magicmouse_probe()
  HID: address kernel-doc warnings
  HID: intel-ish-hid: ishtp-fw-loader: Fix a kernel-doc formatting issue
  HID: intel-ish-hid: ipc: Specify no cache snooping on TGL and ADL
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc
  HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init
  HID: Add new Letsketch tablet driver
  HID: apple: Add Magic Keyboard 2021 with fingerprint reader FN key mapping
  HID: apple: Add 2021 magic keyboard FN key mapping
  HID: magicmouse: set Magic Trackpad 2021 name
  HID: magicmouse: set device name when it has been personalized
  HID: apple: Add 2021 Magic Keyboard with number pad
  HID: apple: Add 2021 Magic Keyboard with fingerprint reader
  HID: i2c-hid-of: Expose the touchscreen-inverted properties
  HID: quirks: Allow inverting the absolute X/Y values
  HID: hidraw: Replace hidraw device table mutex with a rwsem
  HID: thrustmaster use swap() to make code cleaner
  HID: debug: Add USI usages
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - PMBus driver for MPS Multi-phase mp5023

   - PMBus driver for Delta AHE-50DC fan control module

   - Driver for NZXT RGB&Fan Controller/Smart Device v2

   - Driver for Texas Instruments INA238

   - Driver to support X370 Asus WMI

   - Driver to support B550 Asus WMI

  Other notable changes:

   - Cleanup of ntc_thermistor driver, and added support for Samsung
     1404-001221 NTC

   - Improve detection of LM84, MAX1617, and MAX1617A in adm1021 driver

   - Clean up tmp401 driver, and convert to with_info API

   - Add support for regulators and IR38060, IR38164 IR38263 to ir38064
     PMBus driver

   - Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh to
     k10temp driver

   - Add support for F81966 to f71882fg driver

   - Add support for ONSEMI N34TS04 to jc42 driver

   - Clean up and simplify dell-smm driver

   - Add support for ROG STRIX B550-A/X570-I GAMING to nct6775 driver

  And various other minor improvements and fixes"

* tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: (nzxt-smart2) make array detect_fans_report static const
  hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probe
  hwmon: (nzxt-smart2) Fix "unused function" warning
  hwmon: (dell-smm) Pack the whole smm_regs struct
  hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage
  hwmon: (mr75203) fix wrong power-up delay value
  hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible"
  hwmon/pmbus: (ir38064) Expose a regulator
  hwmon/pmbus: (ir38064) Add of_match_table
  hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263
  hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING
  hwmon: (pmbus) Add support for MPS Multi-phase mp5023
  dt-bindings: add Delta AHE-50DC fan control module
  hwmon: (pmbus) Add Delta AHE-50DC fan control module driver
  hwmon: prefix kernel-doc comments for structs with struct
  hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC
  hwmon: (ntc_thermistor) Drop OF dependency
  hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked()
  hwmon: (dell-smm) Simplify ioctl handler
  ...

Pull crypto updates from Herbert Xu:
 "Algorithms:

   - Drop alignment requirement for data in aesni

   - Use synchronous seeding from the /dev/random in DRBG

   - Reseed nopr DRBGs every 5 minutes from /dev/random

   - Add KDF algorithms currently used by security/DH

   - Fix lack of entropy on some AMD CPUs with jitter RNG

  Drivers:

   - Add support for the D1 variant in sun8i-ce

   - Add SEV_INIT_EX support in ccp

   - PFVF support for GEN4 host driver in qat

   - Compression support for GEN4 devices in qat

   - Add cn10k random number generator support"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits)
  crypto: af_alg - rewrite NULL pointer check
  lib/mpi: Add the return value check of kcalloc()
  crypto: qat - fix definition of ring reset results
  crypto: hisilicon - cleanup warning in qm_get_qos_value()
  crypto: kdf - select SHA-256 required for self-test
  crypto: x86/aesni - don't require alignment of data
  crypto: ccp - remove unneeded semicolon
  crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
  crypto: s390/sha512 - Use macros instead of direct IV numbers
  crypto: sparc/sha - remove duplicate hash init function
  crypto: powerpc/sha - remove duplicate hash init function
  crypto: mips/sha - remove duplicate hash init function
  crypto: sha256 - remove duplicate generic hash init function
  crypto: jitter - add oversampling of noise source
  MAINTAINERS: update SEC2 driver maintainers list
  crypto: ux500 - Use platform_get_irq() to get the interrupt
  crypto: hisilicon/qm - disable qm clock-gating
  crypto: omap-aes - Fix broken pm_runtime_and_get() usage
  MAINTAINERS: update caam crypto driver maintainers list
  crypto: octeontx2 - prevent underflow in get_cores_bmap()
  ...

Pull documentation updates from Jonathan Corbet:
 "This isn't a hugely busy cycle for documentation, but a few
  significant things still showed up:

   - A documentation section for ARC processors

   - Reworked and enhanced KUnit documentation

   - The ability to pick your own theme for HTML builds; if the default
     "Read the Docs" theme isn't ugly enough for you, you can now pick
     an uglier one.

   - More Chinese translation work

  Plus the usual assortment of fixes and cleanups"

* tag 'docs-5.17' of git://git.lwn.net/linux: (53 commits)
  scripts: sphinx-pre-install: Fix ctex support on Debian
  docs: discourage use of list tables
  docs: 5.Posting.rst: describe Fixes: and Link: tags
  Documentation: kgdb: Replace deprecated remotebaud
  docs: automarkup.py: Fix invalid HTML link output and broken URI fragments
  Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
  Documentation: kgdb: properly capitalize the MAGIC_SYSRQ config
  docs/zh_CN: Update and fix a couple of typos
  scripts: sphinx-pre-install: add required ctex dependency
  Documentation: KUnit: Restyled Frequently Asked Questions
  Documentation: KUnit: Restyle Test Style and Nomenclature page
  Documentation: KUnit: Rework writing page to focus on writing tests
  Documentation: kunit: Reorganize documentation related to running tests
  Documentation: KUnit: Added KUnit Architecture
  Documentation: KUnit: Rewrite getting started
  Documentation: KUnit: Rewrite main page
  docs/zh_CN: Add zh_CN/accounting/delay-accounting.rst
  Documentation/sphinx: fix typos of "its"
  docs/zh_CN: Add sched-domains translation
  doc: fs: remove bdev_try_to_free_page related doc
  ...

Pull KCSAN updates from Paul McKenney:
 "This provides KCSAN fixes and also the ability to take memory barriers
  into account for weakly-ordered systems. This last can increase the
  probability of detecting certain types of data races"

* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
  kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
  kcsan: Avoid nested contexts reading inconsistent reorder_access
  kcsan: Turn barrier instrumentation into macros
  kcsan: Make barrier tests compatible with lockdep
  kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
  compiler_attributes.h: Add __disable_sanitizer_instrumentation
  objtool, kcsan: Remove memory barrier instrumentation from noinstr
  objtool, kcsan: Add memory barrier instrumentation to whitelist
  sched, kcsan: Enable memory barrier instrumentation
  mm, kcsan: Enable barrier instrumentation
  x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
  x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
  asm-generic/bitops, kcsan: Add instrumentation for barriers
  locking/atomics, kcsan: Add instrumentation for barriers
  locking/barriers, kcsan: Support generic instrumentation
  locking/barriers, kcsan: Add instrumentation for barriers
  kcsan: selftest: Add test case to check memory barrier instrumentation
  kcsan: Ignore GCC 11+ warnings about TSan runtime support
  kcsan: test: Add test cases for memory barrier instrumentation
  kcsan: test: Match reordered or normal accesses
  ...

Pull memory model documentation updates from Paul McKenney:
 "This series contains documentation and litmus tests for locking,
  courtesy of Boqun Feng"

* tag 'lkmm.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools/memory-model: litmus: Add two tests for unlock(A)+lock(B) ordering
  tools/memory-model: doc: Describe the requirement of the litmus-tests directory
  tools/memory-model: Provide extra ordering for unlock+lock pair on the same CPU

Pull RCU updates from Paul McKenney:

 - Documentation updates, perhaps most notably Neil Brown's writeup of
   the reference-counting analogy to RCU.

 - Expedited grace-period cleanups.

 - Remove CONFIG_RCU_FAST_NO_HZ due to lack of valid users. I have asked
   around, posted a blog entry, and sent this series to LKML without
   result.

 - Miscellaneous fixes.

 - RCU callback offloading updates, perhaps most notably Frederic
   Weisbecker's updates allowing CPUs booted in the de-offloaded state
   to be offloaded at runtime.

 - nolibc fixes from Willy Tarreau and Anmar Faizi, but also including
   Mark Brown's addition of gettid().

 - RCU Tasks Trace fixes, including changes that increase the
   scalability of call_rcu_tasks_trace() for the BPF folks (Martin Lau
   and KP Singh).

 - Various fixes including those from Wander Lairson Costa and Li
   Zhijian.

 - Fixes plus addition of tests for the increased call_rcu_tasks_trace()
   scalability.

* tag 'rcu.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (87 commits)
  rcu/nocb: Merge rcu_spawn_cpu_nocb_kthread() and rcu_spawn_one_nocb_kthread()
  rcu/nocb: Allow empty "rcu_nocbs" kernel parameter
  rcu/nocb: Create kthreads on all CPUs if "rcu_nocbs=" or "nohz_full=" are passed
  rcu/nocb: Optimize kthreads and rdp initialization
  rcu/nocb: Prepare nocb_cb_wait() to start with a non-offloaded rdp
  rcu/nocb: Remove rcu_node structure from nocb list when de-offloaded
  rcu-tasks: Use fewer callbacks queues if callback flood ends
  rcu-tasks: Use separate ->percpu_dequeue_lim for callback dequeueing
  rcu-tasks: Use more callback queues if contention encountered
  rcu-tasks: Avoid raw-spinlocked wakeups from call_rcu_tasks_generic()
  rcu-tasks: Count trylocks to estimate call_rcu_tasks() contention
  rcu-tasks: Add rcupdate.rcu_task_enqueue_lim to set initial queueing
  rcu-tasks: Make rcu_barrier_tasks*() handle multiple callback queues
  rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations
  rcu-tasks: Abstract invocations of callbacks
  rcu-tasks: Abstract checking of callback lists
  rcu-tasks: Add a ->percpu_enqueue_lim to the rcu_tasks structure
  rcu-tasks: Inspect stalled task's trc state in locked state
  rcu-tasks: Use spin_lock_rcu_node() and friends
  rcutorture: Combine n_max_cbs from all kthreads in a callback flood
  ...

Pull printk updates from Petr Mladek:

 - Remove some twists in the console registration code. It does not
   change the existing behavior except for one corner case. The proper
   default console (with tty binding) will be registered again even when
   it has been removed in the meantime. It is actually a bug fix.
   Anyway, this modified behavior requires some manual interaction.

 - Optimize gdb extension for huge ring buffers.

 - Do not use atomic operations for a local bitmap variable.

 - Update git links in MAINTAINERS.

* tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  MAINTAIERS/printk: Add link to printk git
  MAINTAINERS/vsprintf: Update link to printk git tree
  scripts/gdb: lx-dmesg: read records individually
  printk/console: Clean up boot console handling in register_console()
  printk/console: Remove need_default_console variable
  printk/console: Remove unnecessary need_default_console manipulation
  printk/console: Rename has_preferred_console to need_default_console
  printk/console: Split out code that enables default console
  vsprintf: Use non-atomic bitmap API when applicable

Pull workqueue updates from Tejun Heo:

 - The code around workqueue scheduler hooks got reorganized early 2019
   which unfortuately introdued a couple subtle and rare race conditions
   where preemption can mangle internal workqueue state triggering a
   WARN and possibly causing a stall or at least delay in execution.

   Frederic fixed both early December and the fixes were sitting in
   for-5.16-fixes which I forgot to push. They are here now. I'll
   forward them to stable after they land.

 - The scheduler hook reorganization has more implicatoins for workqueue
   code in that the hooks are now more strictly synchronized and thus
   the interacting operations can become more straight-forward.

   Lai is in the process of simplifying workqueue code and this pull
   request contains some of the patches.

* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Remove the cacheline_aligned for nr_running
  workqueue: Move the code of waking a worker up in unbind_workers()
  workqueue: Remove schedule() in unbind_workers()
  workqueue: Remove outdated comment about exceptional workers in unbind_workers()
  workqueue: Remove the advanced kicking of the idle workers in rebind_workers()
  workqueue: Remove the outdated comment before wq_worker_sleeping()
  workqueue: Fix unbind_workers() VS wq_worker_sleeping() race
  workqueue: Fix unbind_workers() VS wq_worker_running() race
  workqueue: Upgrade queue_work_on() comment

Pull cgroup updates from Tejun Heo:
 "Nothing too interesting. The only two noticeable changes are a subtle
  cpuset behavior fix and trace event id field being expanded to u64
  from int. Most others are code cleanups"

* 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: convert 'allowed' in __cpuset_node_allowed() to be boolean
  cgroup/rstat: check updated_next only for root
  cgroup: rstat: explicitly put loop variant in while
  cgroup: return early if it is already on preloaded list
  cgroup/cpuset: Don't let child cpusets restrict parent in default hierarchy
  cgroup: Trace event cgroup id fields should be u64
  cgroup: fix a typo in comment
  cgroup: get the wrong css for css_alloc() during cgroup_init_subsys()
  cgroup: rstat: Mark benign data race to silence KCSAN

A task can end up indefinitely sleeping in do_select() ->
poll_schedule_timeout() when the following race happens:

  TASK1 (thread1)             TASK2                   TASK1 (thread2)
  do_select()
    setup poll_wqueues table
    with 'fd'
                              write data to 'fd'
                                pollwake()
                                  table->triggered = 1
                                                      closes 'fd' thread1 is
                                                        waiting for
    poll_schedule_timeout()
      - sees table->triggered
      table->triggered = 0
      return -EINTR
    loop back in do_select()

But at this point when TASK1 loops back, the fdget() in the setup of
poll_wqueues fails.  So now so we never find 'fd' is ready for reading
and sleep in poll_schedule_timeout() indefinitely.

Treat an fd that got closed as a fd on which some event happened.  This
makes sure cannot block indefinitely in do_select().

Another option would be to return -EBADF in this case but that has a
potential of subtly breaking applications that excercise this behavior
and it happens to work for them.  So returning fd as active seems like a
safer choice.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull device properties framework updates from Rafael Wysocki:
 "These update the handling of software nodes and graph properties, and
  the MAINTAINERS entry for the former.

  Specifics:

   - Remove device_add_properties() which does not work correctly if
     software nodes holding additional device properties are shared or
     reused (Heikki Krogerus).

   - Fix nargs_prop property handling for software nodes (Clément
     Léger).

   - Update documentation of ACPI device properties (Sakari Ailus).

   - Update the handling of graph properties in the generic framework to
     match the DT case (Sakari Ailus).

   - Update software nodes entry in MAINTAINERS (Andy Shevchenko)"

* tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Update MAINTAINERS data base
  software node: fix wrong node passed to find nargs_prop
  device property: Drop fwnode_graph_get_remote_node()
  device property: Use fwnode_graph_for_each_endpoint() macro
  device property: Implement fwnode_graph_get_endpoint_count()
  Documentation: ACPI: Update references
  Documentation: ACPI: Fix data node reference documentation
  device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
  device property: Fix fwnode_graph_devcon_match() fwnode leak
  device property: Remove device_add_properties() API
  driver core: Don't call device_remove_properties() from device_del()
  PCI: Convert to device_create_managed_software_node()

Pull thermal control updates from Rafael Wysocki:
 "These add a new driver for Renesas RZ/G2L TSU, update a few existing
  thermal control drivers and clean up the tmon utility.

  Specifics:

   - Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
     (Biju Das).

   - Fix missing check when calling reset_control_deassert() in the
     rz2gl thermal driver (Biju Das).

   - In preparation for FORTIFY_SOURCE performing compile-time and
     run-time field bounds checking for memcpy(), avoid intentionally
     writing across neighboring fields in the int340x thermal control
     driver (Kees Cook).

   - Fix RFIM mailbox write commands handling in the int340x thermal
     control driver (Sumeet Pawnikar).

   - Fix PM issue occurring in the iMX thermal control driver during
     suspend/resume by implementing PM runtime support in it (Oleksij
     Rempel).

   - Add 'const' annotation to thermal_cooling_ops in the Intel
     powerclamp driver (Rikard Falkeborn).

   - Fix missing ADC bit set in the iMX8MP thermal driver to enable the
     sensor (Paul Gerber).

   - Drop unused local variable definition from tmon (ran jianping)"

* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/int340x: Fix RFIM mailbox write commands
  thermal/drivers/rz2gl: Add error check for reset_control_deassert()
  thermal/drivers/imx8mm: Enable ADC when enabling monitor
  thermal/drivers: Add TSU driver for RZ/G2L
  dt-bindings: thermal: Document Renesas RZ/G2L TSU
  thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
  thermal/drivers/imx: Implement runtime PM support
  thermal: tools: tmon: remove unneeded local variable
  thermal: int340x: Use struct_group() for memcpy() region

Pull power management updates from Rafael Wysocki:
 "The most signigicant change here is the addition of a new cpufreq
  'P-state' driver for AMD processors as a better replacement for the
  venerable acpi-cpufreq driver.

  There are also other cpufreq updates (in the core, intel_pstate, ARM
  drivers), PM core updates (mostly related to adding new macros for
  declaring PM operations which should make the lives of driver
  developers somewhat easier), and a bunch of assorted fixes and
  cleanups.

  Summary:

   - Add new P-state driver for AMD processors (Huang Rui).

   - Fix initialization of min and max frequency QoS requests in the
     cpufreq core (Rafael Wysocki).

   - Fix EPP handling on Alder Lake in intel_pstate (Srinivas
     Pandruvada).

   - Make intel_pstate update cpuinfo.max_freq when notified of HWP
     capabilities changes and drop a redundant function call from that
     driver (Rafael Wysocki).

   - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
     Stephen Boyd, Vladimir Zapolskiy).

   - Fix double devm_remap() in the Mediatek cpufreq driver (Hector
     Yuan).

   - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
     Luba).

   - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).

   - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).

   - Fix two comments in cpuidle code (Jason Wang, Yang Li).

   - Allow model-specific normal EPB value to be used in the intel_epb
     sysfs attribute handling code (Srinivas Pandruvada).

   - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).

   - Add safety net to supplier device release in the runtime PM core
     code (Rafael Wysocki).

   - Capture device status before disabling runtime PM for it (Rafael
     Wysocki).

   - Add new macros for declaring PM operations to allow drivers to
     avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
     update some drivers to use these macros (Paul Cercueil).

   - Allow ACPI hardware signature to be honoured during restore from
     hibernation (David Woodhouse).

   - Update outdated operating performance points (OPP) documentation
     (Tang Yizhou).

   - Reduce log severity for informative message regarding frequency
     transition failures in devfreq (Tzung-Bi Shih).

   - Add DRAM frequency controller devfreq driver for Allwinner sunXi
     SoCs (Samuel Holland).

   - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
     Bergmann).

   - Add support for new layout of Psys PowerLimit Register on SPR to
     the Intel RAPL power capping driver (Zhang Rui).

   - Fix typo in a comment in idle_inject.c (Jason Wang).

   - Remove unused function definition from the DTPM (Dynamit Thermal
     Power Management) power capping framework (Daniel Lezcano).

   - Reduce DTPM trace verbosity (Daniel Lezcano)"

* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
  cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
  cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
  cpuidle: use default_groups in kobj_type
  x86: intel_epb: Allow model specific normal EPB value
  MAINTAINERS: Add AMD P-State driver maintainer entry
  Documentation: amd-pstate: Add AMD P-State driver introduction
  cpufreq: amd-pstate: Add AMD P-State performance attributes
  cpufreq: amd-pstate: Add AMD P-State frequencies attributes
  cpufreq: amd-pstate: Add boost mode support for AMD P-State
  cpufreq: amd-pstate: Add trace for AMD P-State module
  cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
  cpufreq: amd-pstate: Add fast switch function for AMD P-State
  cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
  ACPI: CPPC: Add CPPC enable register function
  ACPI: CPPC: Check present CPUs for determining _CPC is valid
  ACPI: CPPC: Implement support for SystemIO registers
  x86/msr: Add AMD CPPC MSR definitions
  x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
  cpufreq: use default_groups in kobj_type
  ...

Pull ACPI updates from Rafael Wysocki:
 "These are usual ACPICA code updates (although there are more of them
  than in the last few releases), a noticeable EC driver update (which
  mostly consists of cleanups, though), the device enumeration quirks
  handling rework from Hans, some updates eliminating unnecessary CPU
  cache flushing in some places (processor idle and system-wide PM code)
  and a bunch of assorted cleanups and fixes.

  Specifics:

   - Update ACPICA code in the kernel to the 20211217 upstream release
     including the following changes:

      - iASL/Disassembler: Additional support for NHLT table (Bob
        Moore).
      - Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
      - Fix a couple of warnings under MSVC (Bob Moore).
      - iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
      - iASL/NHLT table: "Specific Data" field support (Bob Moore).
      - Use original data_table_region pointer for accesses (Jessica
        Clarke).
      - Use original pointer for virtual origin tables (Jessica Clarke).
      - Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
      - Avoid subobject buffer overflow when validating RSDP signature
        (Jessica Clarke).
      - iASL: Add suppport for AGDI table (Ilkka Koskinen).
      - Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
        A. Shutemov).
      - Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
      - Utilities: Avoid deleting the same object twice in a row (Rafael
        Wysocki).
      - Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
        (Rafael Wysocki).
      - Fix AEST Processor generic resource substructure data field byte
        length (Shuuichirou Ishii).
      - Fix wrong interpretation of PCC address (Sudeep Holla).
      - Add support for PCC Opregion special context data (Sudeep
        Holla).

   - Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
     Holla).

   - Introduce acpi_fetch_acpi_dev() as a replacement for
     acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
     Wysocki).

   - Avoid using _CID for device enumaration if _HID is missing or
     invalid (Rafael Wysocki).

   - Rework quirk handling during ACPI device enumeration and add some
     new quirks for known broken platforms (Hans de Goede).

   - Avoid unnecessary or redundant CPU cache flushing during system PM
     transitions (Kirill A. Shutemov).

   - Add PM debug messages related to power resources (Rafael Wysocki).

   - Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang
     Li).

   - Rework flushing of EC work while suspended to idle and clean up the
     handling of events in the ACPI EC driver (Rafael Wysocki).

   - Prohibit ec_sys module parameter write_support from being used when
     the system is locked down (Hans de Goede).

   - Make the ACPI processor thermal driver use cpufreq_cpu_get() to
     check for presence of cpufreq policy (Manfred Spraul).

   - Avoid unnecessary CPU cache flushing in the ACPI processor idle
     driver (Kirill A. Shutemov).

   - Replace kernel.h with the necessary inclusions in the ACPI
     processor driver (Andy Shevchenko).

   - Use swap() instead of open coding it in the ACPI processor idle
     driver (Guo Zhengkui).

   - Fix the handling of defective LPAT in the ACPI xpower PMIC driver
     and clean up some definitions of PMIC data structures (Hans de
     Goede).

   - Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).

   - Add AEST to the list of known ACPI table signatures (Shuuichirou
     Ishii).

   - Make ACPI NUMA code take hotpluggable memblocks into account when
     CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).

   - Use default_groups in kobj_type in the ACPI sysfs code (Greg
     Kroah-Hartman).

   - Rearrange _CPC structure documentation (Andy Shevchenko).

   - Drop an always true check from the ACPI thermal driver (Adam
     Borowski).

   - Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
     battery driver (Thomas Weißschuh)"

* tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype
  ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
  ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
  ACPI: processor: thermal: avoid cpufreq_get_policy()
  serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
  i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
  PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
  ACPI: battery: Add the ThinkPad "Not Charging" quirk
  ACPI: sysfs: use default_groups in kobj_type
  ACPICA: Update version to 20211217
  ACPICA: iASL/NHLT table: "Specific Data" field support
  ACPICA: iASL: Add suppport for AGDI table
  ACPICA: iASL: Add TDEL table to both compiler/disassembler
  ACPICA: Fixed a couple of warnings under MSVC
  ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER)
  ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
  ACPICA: Add support for PCC Opregion special context data
  ACPICA: Fix wrong interpretation of PCC address
  ...

Commit 2c865a8a ("netfilter: nf_tables: add rule blob layout") never
initialized the new 'data_size' variable.

I'm not sure how it ever worked, but it might have worked almost by
accident - gcc seems to occasionally miss these kinds of 'variable used
uninitialized' situations, but I've seen it do so because it ended up
zero-initializing them due to some other simplification.

But clang is very unhappy about it all, and correctly reports

    net/netfilter/nf_tables_api.c:8278:4: error: variable 'data_size' is uninitialized when used here [-Werror,-Wuninitialized]
                            data_size += sizeof(*prule) + rule->dlen;
                            ^~~~~~~~~
    net/netfilter/nf_tables_api.c:8263:30: note: initialize the variable 'data_size' to silence this warning
            unsigned int size, data_size;
                                        ^
                                         = 0
    1 error generated.

and this fix just initializes 'data_size' to zero before the loop.

Fixes: 2c865a8a ("netfilter: nf_tables: add rule blob layout")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Defer freeing TCP skbs to the BH handler, whenever possible, or at
     least perform the freeing outside of the socket lock section to
     decrease cross-CPU allocator work and improve latency.

   - Add netdevice refcount tracking to locate sources of netdevice and
     net namespace refcount leaks.

   - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
     all queues from a single CPU removing latency spikes.

   - Various small optimizations throughout the stack from Eric Dumazet.

   - Make netdev->dev_addr[] constant, force modifications to go via
     appropriate helpers to allow us to keep addresses in ordered data
     structures.

   - Replace unix_table_lock with per-hash locks, improving performance
     of bind() calls.

   - Extend skb drop tracepoint with a drop reason.

   - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.

  BPF
  ---

   - New helpers:
      - bpf_find_vma(), find and inspect VMAs for profiling use cases
      - bpf_loop(), runtime-bounded loop helper trading some execution
        time for much faster (if at all converging) verification
      - bpf_strncmp(), improve performance, avoid compiler flakiness
      - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
        for tracing programs, all inlined by the verifier

   - Support BPF relocations (CO-RE) in the kernel loader.

   - Further the support for BTF_TYPE_TAG annotations.

   - Allow access to local storage in sleepable helpers.

   - Convert verifier argument types to a composable form with different
     attributes which can be shared across types (ro, maybe-null).

   - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
     creating new, extensible ones where missing and deprecating those
     to be removed.

  Protocols
  ---------

   - WiFi (mac80211/cfg80211):
      - notify user space about long "come back in N" AP responses,
        allow it to react to such temporary rejections
      - allow non-standard VHT MCS 10/11 rates
      - use coarse time in airtime fairness code to save CPU cycles

   - Bluetooth:
      - rework of HCI command execution serialization to use a common
        queue and work struct, and improve handling errors reported in
        the middle of a batch of commands
      - rework HCI event handling to use skb_pull_data, avoiding packet
        parsing pitfalls
      - support AOSP Bluetooth Quality Report

   - SMC:
      - support net namespaces, following the RDMA model
      - improve connection establishment latency by pre-clearing buffers
      - introduce TCP ULP for automatic redirection to SMC

   - Multi-Path TCP:
      - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
      - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
        IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
      - support cmsgs: TCP_INQ
      - improvements in the data scheduler (assigning data to subflows)
      - support fastclose option (quick shutdown of the full MPTCP
        connection, similar to TCP RST in regular TCP)

   - MCTP (Management Component Transport) over serial, as defined by
     DMTF spec DSP0253 - "MCTP Serial Transport Binding".

  Driver API
  ----------

   - Support timestamping on bond interfaces in active/passive mode.

   - Introduce generic phylink link mode validation for drivers which
     don't have any quirks and where MAC capability bits fully express
     what's supported. Allow PCS layer to participate in the validation.
     Convert a number of drivers.

   - Add support to set/get size of buffers on the Rx rings and size of
     the tx copybreak buffer via ethtool.

   - Support offloading TC actions as first-class citizens rather than
     only as attributes of filters, improve sharing and device resource
     utilization.

   - WiFi (mac80211/cfg80211):
      - support forwarding offload (ndo_fill_forward_path)
      - support for background radar detection hardware
      - SA Query Procedures offload on the AP side

  New hardware / drivers
  ----------------------

   - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
     real-time requirements for isochronous communication with protocols
     like OPC UA Pub/Sub.

   - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
     integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
     (qcom_bam_dmux).

   - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
     with support for bridging, VLANs and multicast forwarding
     (lan966x).

   - iwlmei driver for co-operating between Intel's WiFi driver and
     Intel's Active Management Technology (AMT) devices.

   - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips

   - Bluetooth:
      - MediaTek MT7921 SDIO devices
      - Foxconn MT7922A
      - Realtek RTL8852AE

  Drivers
  -------

   - Significantly improve performance in the datapaths of: lan78xx,
     ax88179_178a, lantiq_xrx200, bnxt.

   - Intel Ethernet NICs:
      - igb: support PTP/time PEROUT and EXTTS SDP functions on
        82580/i354/i350 adapters
      - ixgbevf: new PF -> VF mailbox API which avoids the risk of
        mailbox corruption with ESXi
      - iavf: support configuration of VLAN features of finer
        granularity, stacked tags and filtering
      - ice: PTP support for new E822 devices with sub-ns precision
      - ice: support firmware activation without reboot

   - Mellanox Ethernet NICs (mlx5):
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
      - support TC forwarding when tunnel encap and decap happen between
        two ports of the same NIC
      - dynamically size and allow disabling various features to save
        resources for running in embedded / SmartNIC scenarios

   - Broadcom Ethernet NICs (bnxt):
      - use page frag allocator to improve Rx performance
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool

   - Other Ethernet NICs:
      - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support

   - Microsoft cloud/virtual NIC (mana):
      - add XDP support (PASS, DROP, TX)

   - Mellanox Ethernet switches (mlxsw):
      - initial support for Spectrum-4 ASICs
      - VxLAN with IPv6 underlay

   - Marvell Ethernet switches (prestera):
      - support flower flow templates
      - add basic IP forwarding support

   - NXP embedded Ethernet switches (ocelot & felix):
      - support Per-Stream Filtering and Policing (PSFP)
      - enable cut-through forwarding between ports by default
      - support FDMA to improve packet Rx/Tx to CPU

   - Other embedded switches:
      - hellcreek: improve trapping management (STP and PTP) packets
      - qca8k: support link aggregation and port mirroring

   - Qualcomm 802.11ax WiFi (ath11k):
      - qca6390, wcn6855: enable 802.11 power save mode in station mode
      - BSS color change support
      - WCN6855 hw2.1 support
      - 11d scan offload support
      - scan MAC address randomization support
      - full monitor mode, only supported on QCN9074
      - qca6390/wcn6855: report signal and tx bitrate
      - qca6390: rfkill support
      - qca6390/wcn6855: regdb.bin support

   - Intel WiFi (iwlwifi):
      - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
        in cooperation with the BIOS
      - support for Optimized Connectivity Experience (OCE) scan
      - support firmware API version 68
      - lots of preparatory work for the upcoming Bz device family

   - MediaTek WiFi (mt76):
      - Specific Absorption Rate (SAR) support
      - mt7921: 160 MHz channel support

   - RealTek WiFi (rtw88):
      - Specific Absorption Rate (SAR) support
      - scan offload

   - Other WiFi NICs
      - ath10k: support fetching (pre-)calibration data from nvmem
      - brcmfmac: configure keep-alive packet on suspend
      - wcn36xx: beacon filter support"

* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
  tcp: tcp_send_challenge_ack delete useless param `skb`
  net/qla3xxx: Remove useless DMA-32 fallback configuration
  rocker: Remove useless DMA-32 fallback configuration
  hinic: Remove useless DMA-32 fallback configuration
  lan743x: Remove useless DMA-32 fallback configuration
  net: enetc: Remove useless DMA-32 fallback configuration
  cxgb4vf: Remove useless DMA-32 fallback configuration
  cxgb4: Remove useless DMA-32 fallback configuration
  cxgb3: Remove useless DMA-32 fallback configuration
  bnx2x: Remove useless DMA-32 fallback configuration
  et131x: Remove useless DMA-32 fallback configuration
  be2net: Remove useless DMA-32 fallback configuration
  vmxnet3: Remove useless DMA-32 fallback configuration
  bna: Simplify DMA setting
  net: alteon: Simplify DMA setting
  myri10ge: Simplify DMA setting
  qlcnic: Simplify DMA setting
  net: allwinner: Fix print format
  page_pool: remove spinlock in page_pool_refill_alloc_cache()
  amt: fix wrong return type of amt_send_membership_update()
  ...

Pull media updates from Mauro Carvalho Chehab:

 - New sensor driver: ov5693

 - A new driver for STM32 Chrom-ART Accelerator

 - Added V4L2 core helper functions for VP9 codec

 - Hantro driver has gained support for VP9 codecs

 - Added support for Maxim MAX96712 Quad GMSL2 Deserializer

 - The staging atomisp driver has gained lots of improvements, fixes and
   cleanups. It now works with userptr

 - Lots of random driver improvements as usual

* tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits)
  media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
  media: ipu3-cio2: Call cio2_bridge_init() before anything else
  media: ipu3-cio2: Defer probing until the PMIC is fully setup
  media: hantro: Add support for Allwinner H6
  media: dt-bindings: allwinner: document H6 Hantro G2 binding
  media: hantro: Convert imx8m_vpu_g2_irq to helper
  media: hantro: move postproc enablement for old cores
  media: hantro: vp9: add support for legacy register set
  media: hantro: vp9: use double buffering if needed
  media: hantro: add support for reset lines
  media: hantro: Fix probe func error path
  media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
  media: i2c: hi846: check return value of regulator_bulk_disable()
  media: hi556: Support device probe in non-zero ACPI D state
  media: ov5675: Support device probe in non-zero ACPI D state
  media: imx208: Support device probe in non-zero ACPI D state
  media: ov2740: support device probe in non-zero ACPI D state
  media: ov5670: Support device probe in non-zero ACPI D state
  media: ov8856: support device probe in non-zero ACPI D state
  media: ov8865: Disable only enabled regulators on error path
  ...

This reverts commit a896f870.

It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7,
subsystem ID 1da2:e353).

Bisected right to this commit, and reverting it fixes things.

Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm updates from Dave Airlie:
 "Highlights are support for privacy screens found in new laptops, a
  bunch of nomodeset refactoring, and i915 enables ADL-P systems by
  default, while starting to add RPL-S support.

  vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.

  Lots of internal refactorings around dma reservations, and lots of
  driver refactoring as well.

  Summary:

  core:
   - add privacy screen support
   - move nomodeset option into drm subsystem
   - clean up nomodeset handling in drivers
   - make drm_irq.c legacy
   - fix stack_depot name conflicts
   - remove DMA_BUF_SET_NAME ioctl restrictions
   - sysfs: send hotplug event
   - replace several DRM_* logging macros with drm_*
   - move hashtable to legacy code
   - add error return from gem_create_object
   - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
   - kernel.h related include cleanups
   - support XRGB2101010 source buffers

  ttm:
   - don't include drm hashtable
   - stop pruning fences after wait
   - documentation updates

  dma-buf:
   - add dma_resv selftest
   - add debugfs helpers
   - remove dma_resv_get_excl_unlocked
   - documentation
   - make fences mandatory in dma_resv_add_excl_fence

  dp:
   - add link training delay helpers

  gem:
   - link shmem/cma helpers into separate modules
   - use dma_resv iteratior
   - import dma-buf namespace into gem helper modules

  scheduler:
   - fence grab fix
   - lockdep fixes

  bridge:
   - switch to managed MIPI DSI helpers
   - register and attach during probe fixes
   - convert to YAML in several places.

  panel:
   - add bunch of new panesl

  simpledrm:
   - support FB_DAMAGE_CLIPS
   - support virtual screen sizes
   - add Apple M1 support

  amdgpu:
   - enable seamless boot for DCN 3.01
   - runtime PM fixes
   - use drm_kms_helper_connector_hotplug_event
   - get all fences at once
   - use generic drm fb helpers
   - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
   - add smart trace buffer (STB) for supported GPUs
   - display debugfs entries
   - new SMU debug option
   - Documentation update

  amdkfd:
   - IP discovery enumeration refactor
   - interface between driver fixes
   - SVM fixes
   - kfd uapi header to define some sysfs bitfields.

  i915:
   - support VESA panel backlights
   - enable ADL-P by default
   - add eDP privacy screen support
   - add Raptor Lake S (RPL-S) support
   - DG2 page table support
   - lots of GuC/HuC fw refactoring
   - refactored i915->gt interfaces
   - CD clock squashing support
   - enable 10-bit gamma support
   - update ADL-P DMC fw to v2.14
   - enable runtime PM autosuspend by default
   - ADL-P DSI support
   - per-lane DP drive settings for ICL+
   - add support for pipe C/D DMC firmware
   - Atomic gamma LUT updates
   - remove CCS FB stride restrictions on ADL-P
   - VRR platform support for display 11
   - add support for display audio codec keepalive
   - lots of display refactoring
   - fix runtime PM handling during PXP suspend
   - improved eviction performance with async TTM moves
   - async VMA unbinding improvements
   - VMA locking refactoring
   - improved error capture robustness
   - use per device iommu checks
   - drop bits stealing from i915_sw_fence function ptr
   - remove dma_resv_prune
   - add IC cache invalidation on DG2

  nouveau:
   - crc fixes
   - validate LUTs in atomic check
   - set HDMI AVI RGB quant to full

  tegra:
   - buffer objects reworks for dma-buf compat
   - NVDEC driver uAPI support
   - power management improvements

  etnaviv:
   - IOMMU enabled system support
   - fix > 4GB command buffer mapping
   - close a DoS vector
   - fix spurious GPU resets

  ast:
   - fix i2c initialization

  rcar-du:
   - DSI output support

  exynos:
   - replace legacy gpio interface
   - implement generic GEM object mmap

  msm:
   - dpu plane state cleanup in prep for multirect
   - dpu debugfs cleanups
   - dp support for sc7280
   - a506 support
   - removal of struct_mutex
   - remove old eDP sub-driver

  anx7625:
   - support MIPI DSI input
   - support HDMI audio
   - fix reading EDID

  lvds:
   - fix bridge DT bindings

  megachips:
   - probe both bridges before registering

  dw-hdmi:
   - allow interlace on bridge

  ps8640:
   - enable runtime PM
   - support aux-bus

  tx358768:
   - enable reference clock
   - add pulse mode support

  ti-sn65dsi86:
   - use regmap bulk write
   - add PWM support

  etnaviv:
   - get all fences at once

  gma500:
   - gem object cleanups

  kmb:
   - enable fb console

  radeon:
   - use dma_resv_wait_timeout

  rockchip:
   - add DSP hold timeout
   - suspend/resume fixes
   - PLL clock fixes
   - implement mmap in GEM object functions
   - use generic fbdev emulation

  sun4i:
   - use CMA helpers without vmap support

  vc4:
   - fix HDMI-CEC hang with display is off
   - power on HDMI controller while disabling
   - support 4K@60Hz modes
   - support 10-bit YUV 4:2:0 output

  vmwgfx:
   - fix leak on probe errors
   - fail probing on broken hosts
   - new placement for MOB page tables
   - hide internal BOs from userspace
   - implement GEM support
   - implement GL 4.3 support

  virtio:
   - overflow fixes

  xen:
   - implement mmap as GEM object function

  omapdrm:
   - fix scatterlist export
   - support virtual planes

  mediatek:
   - MT8192 support
   - CMDQ refinement"

* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
  drm/amdgpu: no DC support for headless chips
  drm/amd/display: fix dereference before NULL check
  drm/amdgpu: always reset the asic in suspend (v2)
  drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
  drm/amd/display: Fix the uninitialized variable in enable_stream_features()
  drm/amdgpu: fix runpm documentation
  amdgpu/pm: Make sysfs pm attributes as read-only for VFs
  drm/amdgpu: save error count in RAS poison handler
  drm/amdgpu: drop redundant semicolon
  drm/amd/display: get and restore link res map
  drm/amd/display: support dynamic HPO DP link encoder allocation
  drm/amd/display: access hpo dp link encoder only through link resource
  drm/amd/display: populate link res in both detection and validation
  drm/amd/display: define link res and make it accessible to all link interfaces
  drm/amd/display: 3.2.167
  drm/amd/display: [FW Promotion] Release 0.0.98
  drm/amd/display: Undo ODM combine
  drm/amd/display: Add reg defs for DCN303
  drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
  drm/amd/display: Set optimize_pwr_state for DCN31
  ...

Merge tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "This consists of several fixes and enhancements. A few highlights:

   - Option --kconfig_add option allows easily tweaking kunitconfigs

   - make build subcommand can reconfigure if needed

   - doesn't error on tests without test plans

   - doesn't crash if no parameters are generated

   - defaults --jobs to # of cups

   - reports test parameter results as (K)TAP subtests"

* tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: Default --jobs to number of CPUs
  kunit: tool: fix newly introduced typechecker errors
  kunit: tool: make `build` subcommand also reconfigure if needed
  kunit: tool: delete kunit_parser.TestResult type
  kunit: tool: use dataclass instead of collections.namedtuple
  kunit: tool: suggest using decode_stacktrace.sh on kernel crash
  kunit: tool: reconfigure when the used kunitconfig changes
  kunit: tool: revamp message for invalid kunitconfig
  kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs
  kunit: tool: move Kconfig read_from_file/parse_from_string to package-level
  kunit: tool: print parsed test results fully incrementally
  kunit: Report test parameter results as (K)TAP subtests
  kunit: Don't crash if no parameters are generated
  kunit: tool: Report an error if any test has no subtests
  kunit: tool: Do not error on tests without test plans
  kunit: add run_checks.py script to validate kunit changes
  Documentation: kunit: remove claims that kunit is a mocking framework
  kunit: tool: fix --json output for skipped tests

Merge tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:
 "Fixes to build errors, false negatives, and several code cleanups,
  including the ARRAY_SIZE cleanup that removes 25+ duplicates
  ARRAY_SIZE defines from individual tests"

* tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/vm: remove ARRAY_SIZE define from individual tests
  selftests/timens: remove ARRAY_SIZE define from individual tests
  selftests/sparc64: remove ARRAY_SIZE define from adi-test
  selftests/seccomp: remove ARRAY_SIZE define from seccomp_benchmark
  selftests/rseq: remove ARRAY_SIZE define from individual tests
  selftests/net: remove ARRAY_SIZE define from individual tests
  selftests/landlock: remove ARRAY_SIZE define from common.h
  selftests/ir: remove ARRAY_SIZE define from ir_loopback.c
  selftests/core: remove ARRAY_SIZE define from close_range_test.c
  selftests/cgroup: remove ARRAY_SIZE define from cgroup_util.h
  selftests/arm64: remove ARRAY_SIZE define from vec-syscfg.c
  tools: fix ARRAY_SIZE defines in tools and selftests hdrs
  selftests: cgroup: build error multiple outpt files
  selftests/move_mount_set_group remove unneeded conversion to bool
  selftests/mount: remove unneeded conversion to bool
  selftests: harness: avoid false negatives if test has no ASSERTs
  selftests/ftrace: make kprobe profile testcase description unique
  selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
  selftests: timers: Remove unneeded semicolon
  kselftests: timers:Remove unneeded semicolon

Pull slab updates from Vlastimil Babka:

 - Separate struct slab from struct page - an offshot of the page folio
   work.

   Struct page fields used by slab allocators are moved from struct page
   to a new struct slab, that uses the same physical storage. Similar to
   struct folio, it always is a head page. This brings better type
   safety, separation of large kmalloc allocations from true slabs, and
   cleanup of related objcg code.

 - A SLAB_MERGE_DEFAULT config optimization.

* tag 'slab-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (33 commits)
  mm/slob: Remove unnecessary page_mapcount_reset() function call
  bootmem: Use page->index instead of page->freelist
  zsmalloc: Stop using slab fields in struct page
  mm/slub: Define struct slab fields for CONFIG_SLUB_CPU_PARTIAL only when enabled
  mm/slub: Simplify struct slab slabs field definition
  mm/sl*b: Differentiate struct slab fields by sl*b implementations
  mm/kfence: Convert kfence_guarded_alloc() to struct slab
  mm/kasan: Convert to struct folio and struct slab
  mm/slob: Convert SLOB to use struct slab and struct folio
  mm/memcg: Convert slab objcgs from struct page to struct slab
  mm: Convert struct page to struct slab in functions used by other subsystems
  mm/slab: Finish struct page to struct slab conversion
  mm/slab: Convert most struct page to struct slab by spatch
  mm/slab: Convert kmem_getpages() and kmem_freepages() to struct slab
  mm/slub: Finish struct page to struct slab conversion
  mm/slub: Convert most struct page to struct slab by spatch
  mm/slub: Convert pfmemalloc_match() to take a struct slab
  mm/slub: Convert __free_slab() to use struct slab
  mm/slub: Convert alloc_slab_page() to return a struct slab
  mm/slub: Convert print_page_info() to print_slab_info()
  ...

Pull random number generator updates from Jason Donenfeld:
 "These a bit more numerous than usual for the RNG, due to folks
  resubmitting patches that had been pending prior and generally renewed
  interest.

  There are a few categories of patches in here:

   1) Dominik Brodowski and I traded a series back and forth for a some
      weeks that fixed numerous issues related to seeds being provided
      at extremely early boot by the firmware, before other parts of the
      kernel or of the RNG have been initialized, both fixing some
      crashes and addressing correctness around early boot randomness.
      One of these is marked for stable.

   2) I replaced the RNG's usage of SHA-1 with BLAKE2s in the entropy
      extractor, and made the construction a bit safer and more
      standard. This was sort of a long overdue low hanging fruit, as we
      were supposed to have phased out SHA-1 usage quite some time ago
      (even if all we needed here was non-invertibility). Along the way
      it also made extraction 131% faster. This required a bit of
      Kconfig and symbol plumbing to make things work well with the
      crypto libraries, which is one of the reasons why I'm sending you
      this pull early in the cycle.

   3) I got rid of a truly superfluous call to RDRAND in the hot path,
      which resulted in a whopping 370% increase in performance.

   4) Sebastian Andrzej Siewior sent some patches regarding PREEMPT_RT,
      the full series of which wasn't ready yet, but the first two
      preparatory cleanups were good on their own. One of them touches
      files in kernel/irq/, which is the other reason why I'm sending
      you this pull early in the cycle.

   5) Other assorted correctness fixes from Eric Biggers, Jann Horn,
      Mark Brown, Dominik Brodowski, and myself"

* 'random-5.17-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: don't reset crng_init_cnt on urandom_read()
  random: avoid superfluous call to RDRAND in CRNG extraction
  random: early initialization of ChaCha constants
  random: use IS_ENABLED(CONFIG_NUMA) instead of ifdefs
  random: harmonize "crng init done" messages
  random: mix bootloader randomness into pool
  random: do not throw away excess input to crng_fast_load
  random: do not re-init if crng_reseed completes before primary init
  random: fix crash on multiple early calls to add_bootloader_randomness()
  random: do not sign extend bytes for rotation when mixing
  random: use BLAKE2s instead of SHA1 in extraction
  lib/crypto: blake2s: include as built-in
  random: fix data race on crng init time
  random: fix data race on crng_node_pool
  irq: remove unused flags argument from __handle_irq_event_percpu()
  random: remove unused irq_flags argument from add_interrupt_randomness()
  random: document add_hwgenerator_randomness() with other input functions
  MAINTAINERS: add git tree for random.c