- 14 Aug, 2018 15 commits
-
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit c9bd2823 upstream. irda_get_mtt() returns a hardcoded '10000' in some cases, and with gcc-7, we get a build error because this triggers a compile-time check in udelay(): drivers/net/irda/w83977af_ir.o: In function `w83977af_hard_xmit': w83977af_ir.c:(.text.w83977af_hard_xmit+0x14c): undefined reference to `__bad_udelay' Older compilers did not run into this because they either did not completely inline the irda_get_mtt() or did not consider the 10000 value a constant expression. The code has been wrong since the start of git history. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 271ef65b upstream. The pointer dma_dev_name is assigned but never read, it is redundant and can therefore be removed. Cleans up clang warning: sound/soc/intel/common/sst-firmware.c:288:3: warning: Value stored to 'dma_dev_name' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit fb239c12 upstream. In _rtl92c_get_txpower_writeval_by_regulatory() the variable writeVal is assigned to itself in an if ... else statement, apparently only to document that the branch condition is handled and that a previously read value should be returned unmodified. The self-assignment causes clang to raise the following warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c:304:13: error: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Werror,-Wself-assign] writeVal = writeVal; Delete the branch with the self-assignment. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 81459649 upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sachin Grover authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit efe3de79 upstream. Call trace: [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428 [<ffffff9203a8dbf8>] show_stack+0x28/0x38 [<ffffff920409bfb8>] dump_stack+0xd4/0x124 [<ffffff9203d187e8>] print_address_description+0x68/0x258 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0 [<ffffff9203d1927c>] kasan_report+0x5c/0x70 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0 [<ffffff9203d17cdc>] memcpy+0x34/0x68 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120 [<ffffff9203d75d68>] getxattr+0x100/0x2c8 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28 If user get root access and calls security.selinux setxattr() with an embedded NUL on a file and then if some process performs a getxattr() on that file with a length greater than the actual length of the string, it would result in a panic. To fix this, add the actual length of the string to the security context instead of the length passed by the userspace process. Signed-off-by:
Sachin Grover <sgrover@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 86b389ff upstream. If a instance has an event trigger enabled when it is freed, it could cause an access of free memory. Here's the case that crashes: # cd /sys/kernel/tracing # mkdir instances/foo # echo snapshot > instances/foo/events/initcall/initcall_start/trigger # rmdir instances/foo Would produce: general protection fault: 0000 [#1] PREEMPT SMP PTI Modules linked in: tun bridge ... CPU: 5 PID: 6203 Comm: rmdir Tainted: G W 4.17.0-rc4-test+ #933 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:clear_event_triggers+0x3b/0x70 RSP: 0018:ffffc90003783de0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0 RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016 R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0 R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c FS: 00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0 Call Trace: event_trace_del_tracer+0x2a/0xc5 instance_rmdir+0x15c/0x200 tracefs_syscall_rmdir+0x52/0x90 vfs_rmdir+0xdb/0x160 do_rmdir+0x16d/0x1c0 __x64_sys_rmdir+0x17/0x20 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe This was due to the call the clears out the triggers when an instance is being deleted not removing the trigger from the link list. Cc: stable@vger.kernel.org Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Benjamin Tissoires authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 40f7090b upstream. New ICs (like the one on the Lenovo T480s) answer to ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack as i2c_smbus_read_block_data() uses the values returned by the i2c device to know how many data it need to return. i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX) and there is no safeguard on how many bytes are provided in the return value. Ensure we always have enough space for any future firmware. Also 0-initialize the values to prevent any access to uninitialized memory. Cc: <stable@vger.kernel.org> # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Brian Foster authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit a27ba260 upstream. The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d5 ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by:
Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by:
-
Yoshinori Sato authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 940d4113 upstream. New gcc (4.8 or later) used new shift helper functions. So we need added new helper to private libgcc. Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
Rich Felker <dalias@libc.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 009615ab upstream. On sparc32, tcflag_t is unsigned long, unlike all other architectures: drivers/usb/serial/cp210x.c: In function 'cp210x_get_termios': drivers/usb/serial/cp210x.c:717:3: warning: passing argument 2 of 'cp210x_get_termios_port' from incompatible pointer type cp210x_get_termios_port(tty->driver_data, ^ drivers/usb/serial/cp210x.c:35:13: note: expected 'unsigned int *' but argument is of type 'tcflag_t *' static void cp210x_get_termios_port(struct usb_serial_port *port, ^ Consistently use tcflag_t to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Michael Neuling authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit faf37c44 upstream. Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by:
Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1776177 commit 32c3fa7c upstream. For LSE atomics that read and write a register operand, we need to ensure that these operands are annotated as "early clobber" if the register is written before all of the input operands have been consumed. Failure to do so can result in the compiler allocating the same register to both operands, leading to splats such as: Unable to handle kernel paging request at virtual address 11111122222221 [...] x1 : 1111111122222222 x0 : 1111111122222221 Process swapper/0 (pid: 1, stack limit = 0x000000008209f908) Call trace: test_atomic64+0x1360/0x155c where x0 has been allocated as both the value to be stored and also the atomic_t pointer. This patch adds the missing clobbers. Cc: <stable@vger.kernel.org> Cc: Dave Martin <dave.martin@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Reported-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1776158Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1776158 This reverts commit 33cebc97 which is 03080e5e ("vti4: Don't override MTU passed on link creation via IFLA_MTU") upstream as it causes test failures. This commit should not have been backported to anything older than 4.16, despite what the changelog said as the mtu must be set in older kernels, unlike is needed in 4.16 and newer. Thanks to Alistair Strachan for the debugging help figuring this out, and for 'git bisect' for making my life a whole lot easier. Cc: Alistair Strachan <astrachan@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:Stefan Bader <stefan.bader@canonical.com>
-
- 09 Aug, 2018 10 commits
-
-
Stefan Bader authored
Signed-off-by: -
Eric Dumazet authored
In case an attacker feeds tiny packets completely out of order, tcp_collapse_ofo_queue() might scan the whole rb-tree, performing expensive copies, but not changing socket memory usage at all. 1) Do not attempt to collapse tiny skbs. 2) Add logic to exit early when too many tiny skbs are detected. We prefer not doing aggressive collapsing (which copies packets) for pathological flows, and revert to tcp_prune_ofo_queue() which will be less expensive. In the future, we might add the possibility of terminating flows that are proven to be malicious. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Eric Dumazet authored
Right after a TCP flow is created, receiving tiny out of order packets allways hit the condition : if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) tcp_clamp_window(sk); tcp_clamp_window() increases sk_rcvbuf to match sk_rmem_alloc (guarded by tcp_rmem[2]) Calling tcp_collapse_ofo_queue() in this case is not useful, and offers a O(N^2) surface attack to malicious peers. Better not attempt anything before full queue capacity is reached, forcing attacker to spend lots of resource and allow us to more easily detect the abuse. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Stefan Bader authored
This reverts commit c2a93660. It made denial of service attacks on the IP fragment handling easier to carry out. CVE-2018-5391 Signed-off-by:
-
Andi Kleen authored
set_memory_np() is used to mark kernel mappings not present, but it has it's own open coded mechanism which does not have the L1TF protection of inverting the address bits. Replace the open coded PTE manipulation with the L1TF protecting low level PTE routines. Passes the CPA self test. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> CVE-2018-3620 CVE-2018-3646 [smb: Context adjustments] Signed-off-by:
-
Stefan Bader authored
Both were introduced when pud size transparent hugepage support was added and that would be too complex and dangerous to backport. The pfn_pud() function was extended in "x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation" but not backported then since it was not present, yet (so no users). For the following patch, though, we will need both. CVE-2018-3620 CVE-2018-3646 Signed-off-by: -
Matt Fleming authored
The x86 pageattr code is confused about the data that is stored in cpa->pfn, sometimes it's treated as a page frame number, sometimes it's treated as an unshifted physical address, and in one place it's treated as a pte. The result of this is that the mapping functions do not map the intended physical address. This isn't a problem in practice because most of the addresses we're mapping in the EFI code paths are already mapped in 'trampoline_pgd' and so the pageattr mapping functions don't actually do anything in this case. But when we move to using a separate page table for the EFI runtime this will be an issue. Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by:
Borislav Petkov <bp@suse.de> Acked-by:
Ingo Molnar <mingo@kernel.org> CVE-2018-3620 CVE-2018-3646 (cherry picked from commit edc3b912) Signed-off-by:
-
Andi Kleen authored
Some cases in THP like: - MADV_FREE - mprotect - split mark the PMD non present for temporarily to prevent races. The window for an L1TF attack in these contexts is very small, but it wants to be fixed for correctness sake. Use the proper low level functions for pmd/pud_mknotpresent() to address this. Signed-off-by:
-
Andi Kleen authored
For kernel mappings PAGE_PROTNONE is not necessarily set for a non present mapping, but the inversion logic explicitely checks for !PRESENT and PROT_NONE. Remove the PROT_NONE check and make the inversion unconditional for all not present mappings. Signed-off-by:
-
Thomas Gleixner authored
Josh reported that the late SMT evaluation in cpu_smt_state_init() sets cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied on the kernel command line as it cannot differentiate between SMT disabled by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and makes the sysfs interface unusable. Rework this so that during bringup of the non boot CPUs the availability of SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a 'primary' thread then set the local cpu_smt_available marker and evaluate this explicitely right after the initial SMP bringup has finished. SMT evaulation on x86 is a trainwreck as the firmware has all the information _before_ booting the kernel, but there is no interface to query it. Fixes: 73d5e2b4 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
- 08 Aug, 2018 15 commits
-
-
Paolo Bonzini authored
When nested virtualization is in use, VMENTER operations from the nested hypervisor into the nested guest will always be processed by the bare metal hypervisor, and KVM's "conditional cache flushes" mode in particular does a flush on nested vmentry. Therefore, include the "skip L1D flush on vmentry" bit in KVM's suggested ARCH_CAPABILITIES setting. Add the relevant Documentation. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
This lets userspace read the MSR_IA32_ARCH_CAPABILITIES and check that all requested features are available on the host. Signed-off-by:
-
Wanpeng Li authored
Introduce kvm_get_msr_feature() to handle the msrs which are supported by different vendors and sharing the same emulation logic. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> CVE-2018-3620 CVE-2018-3646 (cherry picked from commit 66421c1e) Signed-off-by:
-
Tom Lendacky authored
Provide a new KVM capability that allows bits within MSRs to be recognized as features. Two new ioctls are added to the /dev/kvm ioctl routine to retrieve the list of these MSRs and then retrieve their values. A kvm_x86_ops callback is used to determine support for the listed MSR-based features. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
KarimAllah Ahmed authored
commit 28c1c9fa Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO (bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the contents will come directly from the hardware, but user-space can still override it. [dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional] Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Darren Kenny <darren.kenny@oracle.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: kvm@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lkml.kernel.org/r/1517522386-18410-4-git-send-email-karahmed@amazon.deSigned-off-by:
Seth Forshee <seth.forshee@canonical.com> CVE-2018-3620 CVE-2018-3646 (backported from commit a6005a792e24c30cb5fa8525b91af67ca0bcc1e7 bionic) [smb: Context adjustments to work around already applied spectre patches. Also introduced specific guest_cpuid_has_arch_capabilities as replacement for non-existing guest_cpuid_has function.] Signed-off-by:
-
Paolo Bonzini authored
Bit 3 of ARCH_CAPABILITIES tells a hypervisor that L1D flush on vmentry is not needed. Add a new value to enum vmx_l1d_flush_state, which is used either if there is no L1TF bug at all, or if bit 3 is set in ARCH_CAPABILITIES. Signed-off-by:
-
Paolo Bonzini authored
Three changes to the content of the sysfs file: - If EPT is disabled, L1TF cannot be exploited even across threads on the same core, and SMT is irrelevant. - If mitigation is completely disabled, and SMT is enabled, print "vulnerable" instead of "vulnerable, SMT vulnerable" - Reorder the two parts so that the main vulnerability state comes first and the detail on SMT is second. Signed-off-by:
-
Thomas Gleixner authored
Dave reported, that it's not confirmed that Yonah processors are unaffected. Remove them from the list. Reported-by:
ave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Nicolai Stange authored
For VMEXITs caused by external interrupts, vmx_handle_external_intr() indirectly calls into the interrupt handlers through the host's IDT. It follows that these interrupts get accounted for in the kvm_cpu_l1tf_flush_l1d per-cpu flag. The subsequently executed vmx_l1d_flush() will thus be aware that some interrupts have happened and conduct a L1d flush anyway. Setting l1tf_flush_l1d from vmx_handle_external_intr() isn't needed anymore. Drop it. Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
-
Nicolai Stange authored
The last missing piece to having vmx_l1d_flush() take interrupts after VMEXIT into account is to set the kvm_cpu_l1tf_flush_l1d per-cpu flag on irq entry. Issue calls to kvm_set_cpu_l1tf_flush_l1d() from entering_irq(), ipi_entering_ack_irq(), smp_reschedule_interrupt() and uv_bau_message_interrupt(). Suggested-by:
-
Wanpeng Li authored
=============================== [ INFO: suspicious RCU usage. ] 4.8.0-rc6+ #5 Not tainted ------------------------------- ./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/2/0. stack backtrace: CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.8.0-rc6+ #5 Hardware name: Dell Inc. OptiPlex 7020/0F5C5X, BIOS A03 01/08/2015 0000000000000000 ffff8d1bd6003f10 ffffffff94446949 ffff8d1bd4a68000 0000000000000001 ffff8d1bd6003f40 ffffffff940e9247 ffff8d1bbdfcf3d0 000000000000080b 0000000000000000 0000000000000000 ffff8d1bd6003f70 Call Trace: <IRQ> [<ffffffff94446949>] dump_stack+0x99/0xd0 [<ffffffff940e9247>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff9448e0d5>] do_trace_write_msr+0x135/0x140 [<ffffffff9406e750>] native_write_msr+0x20/0x30 [<ffffffff9406503d>] native_apic_msr_eoi_write+0x1d/0x30 [<ffffffff9405b17e>] smp_trace_call_function_interrupt+0x1e/0x270 [<ffffffff948cb1d6>] trace_call_function_interrupt+0x96/0xa0 <EOI> [<ffffffff947200f4>] ? cpuidle_enter_state+0xe4/0x360 [<ffffffff947200df>] ? cpuidle_enter_state+0xcf/0x360 [<ffffffff947203a7>] cpuidle_enter+0x17/0x20 [<ffffffff940df008>] cpu_startup_entry+0x338/0x4d0 [<ffffffff9405bfc4>] start_secondary+0x154/0x180 This can be reproduced readily by running ftrace test case of kselftest. Move the irq_enter() call before ack_APIC_irq(), because irq_enter() tells the RCU susbstems to end the extended quiescent state, so that the following trace call in ack_APIC_irq() works correctly. The same applies to exiting_ack_irq() which calls ack_APIC_irq() after irq_exit(). [ tglx: Massaged changelog ] Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1474198491-3738-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
-
Nicolai Stange authored
The next patch in this series will have to make the definition of irq_cpustat_t available to entering_irq(). Inclusion of asm/hardirq.h into asm/apic.h would cause circular header dependencies like asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/topology.h linux/smp.h asm/smp.h or linux/gfp.h linux/mmzone.h asm/mmzone.h asm/mmzone_64.h asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/irqdesc.h linux/kobject.h linux/sysfs.h linux/kernfs.h linux/idr.h linux/gfp.h and others. This causes compilation errors because of the header guards becoming effective in the second inclusion: symbols/macros that had been defined before wouldn't be available to intermediate headers in the #include chain anymore. A possible workaround would be to move the definition of irq_cpustat_t into its own header and include that from both, asm/hardirq.h and asm/apic.h. However, this wouldn't solve the real problem, namely asm/harirq.h unnecessarily pulling in all the linux/irq.h cruft: nothing in asm/hardirq.h itself requires it. Also, note that there are some other archs, like e.g. arm64, which don't have that #include in their asm/hardirq.h. Remove the linux/irq.h #include from x86' asm/hardirq.h. Fix resulting compilation errors by adding appropriate #includes to *.c files as needed. Note that some of these *.c files could be cleaned up a bit wrt. to their set of #includes, but that should better be done from separate patches, if at all. Signed-off-by: -
Nicolai Stange authored
Part of the L1TF mitigation for vmx includes flushing the L1D cache upon VMENTRY. L1D flushes are costly and two modes of operations are provided to users: "always" and the more selective "conditional" mode. If operating in the latter, the cache would get flushed only if a host side code path considered unconfined had been traversed. "Unconfined" in this context means that it might have pulled in sensitive data like user data or kernel crypto keys. The need for L1D flushes is tracked by means of the per-vcpu flag l1tf_flush_l1d. KVM exit handlers considered unconfined set it. A vmx_l1d_flush() subsequently invoked before the next VMENTER will conduct a L1d flush based on its value and reset that flag again. Currently, interrupts delivered "normally" while in root operation between VMEXIT and VMENTER are not taken into account. Part of the reason is that these don't leave any traces and thus, the vmx code is unable to tell if any such has happened. As proposed by Paolo Bonzini, prepare for tracking all interrupts by introducing a new per-cpu flag, "kvm_cpu_l1tf_flush_l1d". It will be in strong analogy to the per-vcpu ->l1tf_flush_l1d. A later patch will make interrupt handlers set it. For the sake of cache locality, group kvm_cpu_l1tf_flush_l1d into x86' per-cpu irq_cpustat_t as suggested by Peter Zijlstra. Provide the helpers kvm_set_cpu_l1tf_flush_l1d(), kvm_clear_cpu_l1tf_flush_l1d() and kvm_get_cpu_l1tf_flush_l1d(). Make them trivial resp. non-existent for !CONFIG_KVM_INTEL as appropriate. Let vmx_l1d_flush() handle kvm_cpu_l1tf_flush_l1d in the same way as l1tf_flush_l1d. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Nicolai Stange authored
An upcoming patch will extend KVM's L1TF mitigation in conditional mode to also cover interrupts after VMEXITs. For tracking those, stores to a new per-cpu flag from interrupt handlers will become necessary. In order to improve cache locality, this new flag will be added to x86's irq_cpustat_t. Make some space available there by shrinking the ->softirq_pending bitfield from 32 to 16 bits: the number of bits actually used is only NR_SOFTIRQS, i.e. 10. Suggested-by:
-
Nicolai Stange authored
Currently, vmx_vcpu_run() checks if l1tf_flush_l1d is set and invokes vmx_l1d_flush() if so. This test is unncessary for the "always flush L1D" mode. Move the check to vmx_l1d_flush()'s conditional mode code path. Notes: - vmx_l1d_flush() is likely to get inlined anyway and thus, there's no extra function call. - This inverts the (static) branch prediction, but there hadn't been any explicit likely()/unlikely() annotations before and so it stays as is. Signed-off-by:
-
