- 26 Apr, 2022 1 commit
-
-
Mark Brown authored
Check that values written via snd_soc_put_volsw_range() are within the range advertised by the control, ensuring that we don't write out of spec values to the hardware. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.orgSigned-off-by:
-
- 25 Apr, 2022 4 commits
-
-
Codrin Ciubotariu authored
As pointed out by Sascha Hauer, this patch changes: if (pmc->config && !pcm->config->prepare_slave_config) <do nothing> to: if (pmc->config && !pcm->config->prepare_slave_config) snd_dmaengine_pcm_prepare_slave_config() This breaks the drivers that do not need a call to dmaengine_slave_config(). Drivers that still need to call snd_dmaengine_pcm_prepare_slave_config(), but have a NULL pcm->config->prepare_slave_config should use snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config callback. Fixes: 9a1e1344 ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback") Reported-by:Sascha Hauer <sha@pengutronix.de> Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.comSigned-off-by:
-
Codrin Ciubotariu authored
Since a pointer to struct snd_dmaengine_pcm_config is passed, snd_dmaengine_pcm_prepare_slave_config() is no longer called unless it's explicitly set in prepare_slave_config. Fixes: 50291652 ("ASoC: atmel: mchp-pdmc: add PDMC driver") Suggested-by:
-
Mark Brown authored
The max98090 driver has some custom controls which share a put() function which returns 0 unconditionally, meaning that events are not generated when the value changes. Fix that. Signed-off-by:
-
Mark Brown authored
The max98090 driver has a custom put function for some controls which can only be updated in certain circumstances which makes no effort to validate that input is suitable for the control, allowing out of spec values to be written to the hardware and presented to userspace. Fix this by returning an error when invalid values are written. Signed-off-by:
-
- 22 Apr, 2022 1 commit
-
-
ChiYuan Huang authored
Correct the reg 0x09 size to one byte. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1650608810-3829-1-git-send-email-u0084500@gmail.comSigned-off-by:
-
- 21 Apr, 2022 6 commits
-
-
Neil Armstrong authored
This commit e138233e causes the following system crash when using audio on G12A/G12B & SM1 systems: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0 preempt_count: 10001, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: schedule_preempt_disabled+0x20/0x2c mutex_lock+0x24/0x60 _snd_pcm_stream_lock_irqsave+0x20/0x3c snd_pcm_period_elapsed+0x24/0xa4 axg_fifo_pcm_irq_block+0x64/0xdc __handle_irq_event_percpu+0x104/0x264 handle_irq_event+0x48/0xb4 ... start_kernel+0x3f0/0x484 __primary_switched+0xc0/0xc8 Revert this commit until the crash is fixed. Fixes: e138233e ("ASoC: meson: axg-card: make links nonatomic") Reported-by:
Dmitry Shmidt <dimitrysh@google.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20220421155725.2589089-2-narmstrong@baylibre.comSigned-off-by:
-
Neil Armstrong authored
This reverts commit bf5e4887 because the following and required commit e138233e causes the following system crash when using audio: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282 Fixes: bf5e4887 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger") Reported-by:
-
Pierre-Louis Bossart authored
cppcheck throws the following warning: sound/soc/soc-ops.c:461:8: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] ret = err; ^ This seems to be a missing change in the return value. Fixes: 7f3d90a3 ("ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()") Signed-off-by:Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220421162328.302017-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Mark Brown authored
The G12A tohdmi has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
-
Mark Brown authored
The AIU CODEC has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
-
Mark Brown authored
The AIU ACODEC has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
-
- 20 Apr, 2022 2 commits
-
-
Mark Brown authored
The tone generator frequency control just returns 0 on successful write, not a boolean value indicating if there was a change or not. Compare what was written with the value that was there previously so that notifications are generated appropriately when the value changes. Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220420133437.569229-1-broonie@kernel.orgSigned-off-by:
-
Olivier Moysan authored
In asoc_simple_shutdown() the snd_soc_dai_set_sysclk() function is called twice with input direction SND_SOC_CLOCK_IN. Restore one call with output direction SND_SOC_CLOCK_OUT. Fixes: 5ca2ab45 ("ASoC: simple-card-utils: Add new system-clock-fixed flag") Signed-off-by:
Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20220412111658.11015-1-olivier.moysan@foss.st.comSigned-off-by:
-
- 19 Apr, 2022 1 commit
-
-
Mark Brown authored
The WM8958 DSP controls all return 0 on successful write, not a boolean value indicating if the write changed the value of the control. Fix this by returning 1 after a change, there is already a check at the start of each put() that skips the function in the case that there is no change. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org Cc: stable@vger.kernel.org
-
- 12 Apr, 2022 1 commit
-
-
Richard Fitzgerald authored
For wmfw format v2 and later the coefficient name strings have a length field and are NOT null-terminated. Use kasprintf() to convert the unterminated string into a null-terminated string in an allocated buffer. The previous code handled this duplication incorrectly using kmemdup() and getting the length from a strlen() of the (unterminated) source string. This resulted in creating a string that continued up to the next byte in the firmware file that just happened to be 0x00. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: f6bc909e ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs") Link: https://lore.kernel.org/r/20220412163927.1303470-1-rf@opensource.cirrus.comSigned-off-by:
-
- 08 Apr, 2022 2 commits
-
-
Christophe JAILLET authored
After a successful lpass_macro_pds_init() call, lpass_macro_pds_exit() must be called. Add the missing call in the error handling path of the probe function and use it. Fixes: 9e3d83c5 ("ASoC: codecs: Add power domains support in digital macro codecs") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5b5a015a9b1dc8011c6a4053fa49da1f2531e47c.1648969065.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Mark Brown authored
Merge series from Mauro Carvalho Chehab <mchehab@kernel.org>: Huawei Matebook D15 uses two different GPIOs are used to control the output: - gpio0 controls the speaker output; - gpio1 controls the headphone output. Changing both at the same time cause spurious events that are mis-interpreted as input events, causing troubles on apps. So, a delay is needed before turning on such gpios. Also, the headset microphone is connected to MIC1, instead of MIC2 port. With this patch, plugging a headphone causes a jack event to trigger the speaker supply, powering down the speaker and powering up the headphone output. Removing the headphone also triggers the power supply, powering up the speaker and powering down the headphone. The headset microphone also works.
-
- 07 Apr, 2022 10 commits
-
-
Mauro Carvalho Chehab authored
Based on experimental tests, Huawei Matebook D15 actually uses both gpio0 and gpio1: the first one controls the speaker, while the other one controls the headphone. Also, the headset is mapped as MIC1, instead of MIC2. So, add a quirk for it. Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by:
-
Mauro Carvalho Chehab authored
The headset/internal mic can either be routed as mic1/mic2 or vice-versa. By default, the driver assumes that the headset is mapped as mic2, but not all devices map this way. So, add a quirk to support changing it to mic1, using mic2 for the internal analog mic (if any). Signed-off-by:
-
Mauro Carvalho Chehab authored
Some devices may use both gpio0 and gpio1 to independently switch the speaker and the headphone. Add support for that. Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Pierre-Louis Bossart authored
In preparation for the support of an additional gpio for headphone control, rename GPIOs to make explicit references to speakers and gpio0 or gpio1. No functionality change. Signed-off-by:
-
Zheyu Ma authored
When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init(). The following log reveals it: [ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] <TASK> [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.comSigned-off-by:
-
Chao Song authored
The left speaker of max98373 uses spk_r_endpoint, and right speaker uses spk_l_endpoint, this is obviously wrong. This patch corrects the endpoints for max98373 codec. Signed-off-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
-
Srinivas Kandagatla authored
SIDO(Single-Inductor Dual-Ouput) Buck powers up both analog and digital circuits along with internal memory, powering off this is the last thing that codec should do when going to very low power. Current code was powering off this Buck if there are no users of sysclk, which is not correct. Powering off this buck will result in no register access. This code path was never tested until recently after adding pm support in SoundWire controller. Fix this by removing the buck poweroff when the codec is active and also the code that is not used. Without this patch all the read/write transactions will never complete and results in SLIMBus Errors like: qcom,slim-ngd qcom,slim-ngd.1: Tx:MT:0x0, MC:0x60, LA:0xcf failed:-110 wcd934x-codec wcd934x-codec.1.auto: ASoC: error at soc_component_read_no_lock on wcd934x-codec.1.auto for register: [0x00000d05] -110 qcom,slim-ngd-ctrl 171c0000.slim: Error Interrupt received 0x82000000 Reported-by:
Amit Pundir <amit.pundir@linaro.org> Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
-
Yu Liao authored
scontrol doesn't get freed when kstrdup returns NULL. Fix by free iscontrol in that case. scontrol = kzalloc(sizeof(*scontrol), GFP_KERNEL); if (!scontrol) return -ENOMEM; scontrol->name = kstrdup(hdr->name, GFP_KERNEL); if (!scontrol->name) return -ENOMEM; Signed-off-by:Yu Liao <liaoyu15@huawei.com> Link: https://lore.kernel.org/r/20220318021616.2599630-1-liaoyu15@huawei.comSigned-off-by:
-
Pierre-Louis Bossart authored
We set the cpu_dai capture_ or playback_widget on widget_ready but never clear them, which leads to failures when unloading/reloading a topology in modprobe/rmmod tests BugLink: https://github.com/thesofproject/linux/issues/3535 Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies") Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
This patch takes a defensive programming and paranoid approach in case the parent device (SoundWire) is pm_runtime resumed but the rt711 device is not. In that case, during the attachment and initialization, a jack detection workqueue can be scheduled. Since the pm_runtime suspend routines will not be invoked, the sequence to cancel all deferred work is not executed, and the jack detection could happen after the bus stops operating, leading to a timeout. This patch applies the same solution to rt5682, based on the similarities between codec drivers. The race condition with rt5682 was not detected experimentally though. BugLink: https://github.com/thesofproject/linux/issues/3459Signed-off-by:
-
- 06 Apr, 2022 4 commits
-
-
Ajye Huang authored
Follow Intel's design to replace max98360a amp SSP2 reather than SSP1 by judging DMI_OEM_STRING in sof_rt5682_quirk_table struct. And reusing max98357's topology since DAI setting could be leveraged. Signed-off-by:
Ajye Huang <ajye_huang@compal.corp-partner.google.com> Acked-by:
-
Ahmad Fatoum authored
Refactoring in commit a50b7926 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support") led to the bypass never happening as (ratio = 1) was caught in the existing if (ratio & 1) continue; check. The correct check sequence instead is: - skip all ratios lower than one and higher than 512 - skip all odd ratios except for 1:1 - skip 1:1 ratio if and only if !support_1_1_ratio And for all others, calculate the appropriate divider. Adjust the code to facilitate this. Fixes: a50b7926 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support") Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220405155731.745413-1-a.fatoum@pengutronix.deSigned-off-by:
-
Richard Fitzgerald authored
Don't dereference simple_dai before it has been checked for NULL. Signed-off-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220404113252.1152659-1-rf@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
Merge series from Heiner Kallweit <hkallweit1@gmail.com>: On a S905W-based system I get the following error: debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present! Turned out that multiple components having the same name triggers this error in soc_init_component_debugfs(). The proposed solution allows other drivers to adopt the same approach with minimal effort. With the patch the error is gone and that's the debugfs entries. /sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
-
- 05 Apr, 2022 8 commits
-
-
Heiner Kallweit authored
On a S905W-based system I get the following error: debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present! Turned out that multiple components having the same name triggers this error in soc_init_component_debugfs(). With the patch the error is gone and that's the debugfs entries. /sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/38053baf-c33b-7fdf-7593-99b22153a9c0@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Allow the component debugfs_prefix to be set from snd_soc_component_driver. First use case is avoiding a duplicate debugfs entry error in case a device has multiple components which have the same name therefore. Note that we don't set component->debugfs_prefix if it's set already. That's needed because partially component->debugfs_prefix is set before calling snd_soc_component_initialize(). Signed-off-by:
-
Miaoqian Lin authored
devm_snd_soc_register_component() may fails, we should check the error and do the corresponding error handling. Fixes: 150db8c5 ("ASoC: codecs: Add msm8916-wcd digital codec") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220403115239.30140-1-linmq006@gmail.comSigned-off-by:
-
Miaoqian Lin authored
We need to call clk_put() to undo clk_get() in the error path. Use devm_clk_get() to obtain a reference to the clock, It has the benefit that clk_put() is no longer required. Fixes: 0d6a04da ("ASoC: Add Rockchip rk817 audio CODEC support") Signed-off-by:
-
Hui Wang authored
We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers a warning calltrace like below: cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24 cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0 ================================================================================ UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] When both bitoffset and otp_map[i].size are 0, the line 836 will result in GENMASK(-1, 0), this triggers the shift-out-of-bounds calltrace. Here add a checking, if both bitoffset and otp_map[i].size are 0, do not run GENMASK() and directly set otp_val to 0, this will not bring any function change on the driver but could avoid the calltrace. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.comSigned-off-by:
-
Hui Wang authored
otp_map[].size is a key variable to compute the value of otp_val and to update the bit_offset, it is helpful to debug if could put it in the debug log. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220324081839.62009-1-hui.wang@canonical.comSigned-off-by:
-
Xiaomeng Tong authored
The bug is here: if (!dai) { The list iterator value 'dai' will *always* be set and non-NULL by for_each_component_dais(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found (In fact, it will be a bogus pointer to an invalid struct object containing the HEAD). Otherwise it will bypass the check 'if (!dai) {' (never call dev_err() and never return -ENODEV;) and lead to invalid memory access lately when calling 'rt5682_set_bclk1_ratio(dai, factor);'. To fix the bug, just return rt5682_set_bclk1_ratio(dai, factor); when found the 'dai', otherwise dev_err() and return -ENODEV; Cc: stable@vger.kernel.org Fixes: ebbfabc1 ("ASoC: rt5682: Add CCF usage for providing I2S clks") Signed-off-by:Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327081002.12684-1-xiam0nd.tong@gmail.comSigned-off-by:
-
Xiaomeng Tong authored
These two bug are here: list_for_each_entry_safe_continue(w, n, list, power_list); list_for_each_entry_safe_continue(w, n, list, power_list); After the list_for_each_entry_safe_continue() exits, the list iterator will always be a bogus pointer which point to an invalid struct objdect containing HEAD member. The funciton poniter 'w->event' will be a invalid value which can lead to a control-flow hijack if the 'w' can be controlled. The original intention was to continue the outer list_for_each_entry_safe() loop with the same entry if w->event is NULL, but misunderstanding the meaning of list_for_each_entry_safe_continue(). So just add a 'continue;' to fix the bug. Cc: stable@vger.kernel.org Fixes: 163cac06 ("ASoC: Factor out DAPM sequence execution") Signed-off-by:
-
