Greg previously suggested switching over to debugfs instead of a char
interface to report raw samples to user-space. At the time we agreed not
to go for that change. However later patches in this series are made
simpler if debugfs is used instead of /dev, so it makes sense to make the
conversion now for that reason. This patch removes the char interface and
replaces it with a debugfs interface. Raw samples will be acquired from
/sys/kernel/debug/gb_loopback/raw_latency_endo0:x:y:z:w where

x = <module-id>
y = <interface-id>
z = <bundle-id>
w = <cport-number>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds the ability to graph the latency of the overhead introduced
by the greybus stack in the roundtrip time AP->Module->AP.

Since this is a small number it is reported in nanoseconds, not
mircoseconds. This data can also be derived with tracepoints but it's being
provided in this format to export to CSV file more easily than with
tracepoints.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

'user-replicable' means something that a user can replicate.
'user-replaceable' means something that a user can replace. We defintely
mean to say replaceable not replicable here.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Greybus core now handle the _INVALID and PROTOCOL_VERSION types, so no
need to have specific protocol macros for this. Just drop them.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The order of arguments is wrong and that shows up as a warning only on
64 bit machines.

Fixes: cb0ef0c019ab ("operation: print message type on errors")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

[[, == and echo -e are bash/zsh-ism and not POSIX, so when using a POSIX
shell the kernel_cmp can issue some warnings and not work properly.

Use only POSIX operators for kernel version compare.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds lights implementation for Greybus Lights class, it
allows multiplexing of lights devices using the same connection. Also
adds two sysfs entries to led class (color, fade) which are commonly
used in several existing LED devices.

It support 2 major class of devices (normal LED and flash type), for
the first it registers to led_classdev, for the latest it registers in
the led_classdev_flash and v4l2_flash, depending on the support of the
kernel version.

Each Module can have N light devices attach and each light can have
multiple channel associated:
glights
   |->light0
   |     |->channel0
   |     |->channel1
   |     | ....
   |     |->channeln
   |->...
   |->lightn
         |->channel0
         |->channel1
         | ....
         |->channeln
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add a function to check kernel versions and append the necessary
options to support LEDS_CLASS, LEDS_CLASS_FLASH and  V4L2_FLASH_LED_CLASS
depending of the kernel version.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odnoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odnoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This can be very useful debug information, print it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Greybus core supports protocol independent macros for this now, use
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We are already doing put_device() here and so don't need to free
resources directly, except ida.

Fixes: afde17fe0b61 ("greybus/connection: fix jump label on device_add failure")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Need to destroy the wq created earlier, do it.

Fixes: d0f1778a6b67 ("greybus/connection: add a timestamp kfifo to track connection handoff")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These must be exposed to external modules, like gbsim. Move them to
greybus_protocols.h file.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These must be exposed to external modules, like gbsim. Move them to
greybus_protocols.h file.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These must be exposed to external modules, like gbsim. Move them to
greybus_protocols.h file.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The greybus specifications clearly say (for all protocols) that the
sender is responsible for sending the highest version of protocol it
supports, while it requests the same from the receiver.

But the greybus code never followed that.

Fix, this by always sending AP's version of the protocol, while
requesting the same from svc/module.

This also renames 'response' to 'version' in gb_protocol_get_version()
as it is used for both request/response.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This drags in the firmware driver, and the start of some loopback
changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

As per greybus specs, we need to send the protocol version for firmware
protocol and so this special case Hack.

Probably we should always send the protocol version AP supports and kill
this hack completely. But then it requires updates to specs as well, and
that should be done after some discussion.

For now, add a FIXME for that and a special case for firmware protocol.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This adds firmware protocol driver based on the latest specs available
on mailing lists. This uses the firmware framework present in kernel.

Refer Documentation/firmware_class/README on how it works.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The version request can only send the version of protocol for which it
is initiated and gb_protocol_get_version() has all the information to
create the request structure.

Replace the 'request' and 'request_size' arguments to
gb_protocol_get_version() with a bool to know if the version information
of the protocol should be sent or not.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This shall be used later to find a firmware blob for the interface, lets
save it in the interface structure.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch ensures we account for roll-over in the loopback driver.
do_gettimeofday() is used to grab a timestamp. Two timestamps are derived
one before and one after a gb_operation_sync(), however since
do_gettimeofday() returns the number of seconds and mircoseconds that have
elapsed today - we need to account for a situation where the timestamp
starts at say 23:59:999us rolls over and the end time is now earlier than
the start time.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We have a pattern similar to this over and over again gb->elapsed_nsecs =
timeval_to_ns(&te) - timeval_to_ns(&ts); good software practice dictates we
functionally decompose this. This patch decomposes into
gb_loopback_calc_latency().
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In order to facilitate grabbing a timestamp that doesn't include greybus
overhead, this patch adds a timestamp right before usb_submit_urb() for
both es1.c and es2.c. Long term the timestmaping of messages like this
probably wants to go away but, for the moment it may have some use to the
firmware people instrumenting the performance of the system.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For the ES2 test activity it may be beneficial to have a performance
metric that doesn't include any of the greybus stack malloc, workqueues
etc. In order to faciltate, this patch adds a simple kfifo structure to
hold two timestamp values. One timestamp will represent the last reasonable
point a greybus outbound timestamp can be taken, the other timestamp will
represent the first reasonable point an inbound timestamp can be taken. In
order to facilitate this model, tracking the timestamps in the connection
structure appears to be the best place to keep store of this data.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

On device_add() failure in gb_connection_create_range() we jump to
err_remove_ida. Instead we should be jumping to err_free_connection, so
change the flow to accomodate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This required some hand-tweaking in connection.c, hopefully I got it all
correct...
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some of the parameters are not really required, drop them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No more users now, drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These weren't preserved earlier, save them in the connection structure
instead of creating its own fields..
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>