- 17 Aug, 2022 1 commit
-
-
Geert Uytterhoeven authored
NF_CONNTRACK_PROCFS was marked obsolete in commit 54b07dca ("netfilter: provide config option to disable ancient procfs parts") in v3.3. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Florian Westphal <fw@strlen.de>
-
- 15 Aug, 2022 3 commits
-
-
Pablo Neira Ayuso authored
Since f3a2181e ("netfilter: nf_tables: Support for sets with multiple ranged fields"), it possible to combine intervals and concatenations. Later on, ef516e86 ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag for userspace to report that the set stores a concatenation. Make sure NFT_SET_CONCAT is set on if field_count is specified for consistency. Otherwise, if NFT_SET_CONCAT is specified with no field_count, bail out with EINVAL. Fixes: ef516e86 ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
These flags are mutually exclusive, report EINVAL in this case. Fixes: aaa31047 ("netfilter: nftables: add catch-all set element support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise, NFTA_SET_ELEM_KEY_END should not be present. For catch-all element, NFTA_SET_ELEM_KEY_END should not be present. The NFT_SET_ELEM_INTERVAL_END is never used with this set flags combination. Fixes: 7b225d0b ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 12 Aug, 2022 1 commit
-
-
Pablo Neira Ayuso authored
If the NFTA_SET_ELEM_OBJREF netlink attribute is present and NFT_SET_OBJECT flag is set on, report EINVAL. Move existing sanity check earlier to validate that NFT_SET_OBJECT requires NFTA_SET_ELEM_OBJREF. Fixes: 8aeff920 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 11 Aug, 2022 7 commits
-
-
Pablo Neira Ayuso authored
While looping to build the bitmap of used anonymous set names, check the current set in the iteration, instead of the one that is being created. Fixes: 37a9cc52 ("netfilter: nf_tables: add generation mask to sets") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
To avoid allocation of the conntrack extension area when possible, the default behaviour was changed to only allocate the event extension if a userspace program is subscribed to a notification group. Problem is that while 'conntrack -E' does enable the event allocation behind the scenes, 'conntrack -E expect' does not: no expectation events are delivered unless user sets "net.netfilter.nf_conntrack_events" back to 1 (always on). Fix the autodetection to also consider EXP type group. We need to track the 6 event groups (3+3, new/update/destroy for events and for expectations each) independently, else we'd disable events again if an expectation group becomes empty while there is still an active event group. Fixes: 2794cdb0 ("netfilter: nfnetlink: allow to detect if ctnetlink listeners exist") Reported-by: Yi Chen <yiche@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de>
-
Florian Westphal authored
nf_tables_check_loops() can be called from rhashtable list walk so cond_resched() cannot be used here. Fixes: 81ea0106 ("netfilter: nf_tables: add rescheduling points during loop detection walks") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
This uses a pseudo-linearization scheme with a 64k global buffer, but BIG TCP arrival means IPv6 TCP stack can generate skbs that exceed this size. In practice, IRC commands are not expected to exceed 512 bytes, plus this is interactive protocol, so we should not see large packets in practice. Given most IRC connections nowadays use TLS so this helper could also be removed in the near future. Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536") Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
This uses a pseudo-linearization scheme with a 64k global buffer, but BIG TCP arrival means IPv6 TCP stack can generate skbs that exceed this size. Use skb_linearize. It should be possible to rewrite this to properly deal with segmented skbs (i.e., only do small chunk-wise accesses), but this is going to be a lot more intrusive than this because every helper function needs to get the sk_buff instead of a pointer to a raw data buffer. In practice, provided we're really looking at FTP control channel packets, there should never be a case where we deal with huge packets. Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536") Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
With BIG TCP, packets generated by tcp stack may exceed 64kb. Cap datalen at 64kb. The internal message format uses 16bit fields, so no embedded message can exceed 64k size. Multiple h323 messages in a single superpacket may now result in a message to get treated as incomplete/truncated, but thats better than scribbling past h323_buffer. Another alternative suitable for net tree would be a switch to skb_linearize(). Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536") Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
For historical reason this code performs pseudo linearization of skbs via skb_header_pointer and a global 64k buffer. With arrival of BIG TCP, packets generated by TCP stack can exceed 64kb. Rewrite this to only extract the needed header data. This also allows to get rid of the locking. Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536") Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 10 Aug, 2022 21 commits
-
-
Pablo Neira Ayuso authored
dst->ops is set on when nft_expr_clone() fails, but module refcount has not been bumped yet, therefore nft_expr_destroy() leads to module reference underflow. Fixes: 8cfd9b0f ("netfilter: nftables: generalize set expressions support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
These are mutually exclusive, actually NFTA_SET_ELEM_KEY_END replaces the flag notation. Fixes: 7b225d0b ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
The generation ID is bumped from the commit path while holding the mutex, however, netlink dump operations rely on RCU. This patch also adds missing cb->base_eq initialization in nf_tables_dump_set(). Fixes: 38e029f1 ("netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Jakub Kicinski authored
Commit 50a896cf ("genetlink: properly support per-op policy dumping") seems to have copy'n'pasted things a little incorrectly. The #define CTRL_ATTR_MCAST_GRP_MAX should have stayed right after the previous enum. The new CTRL_ATTR_POLICY_* needs its own define for MAX and that max should not contain the superfluous _DUMP in the name. We probably can't do anything about the CTRL_ATTR_POLICY_DUMP_MAX any more, there's likely code which uses it. For consistency (*cough* codegen *cough*) let's add the correctly name define nonetheless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
After a failed devlink reload, devlink parameters are still registered, which means user space can set and get their values. In the case of the mlxsw "acl_region_rehash_interval" parameter, these operations will trigger a use-after-free [1]. Fix this by rejecting set and get operations while in the failed state. Return the "-EOPNOTSUPP" error code which does not abort the parameters dump, but instead causes it to skip over the problematic parameter. Another possible fix is to perform these checks in the mlxsw parameter callbacks, but other drivers might be affected by the same problem and I am not aware of scenarios where these stricter checks will cause a regression. [1] mlxsw_spectrum3 0000:00:10.0: Port 125: Failed to register netdev mlxsw_spectrum3 0000:00:10.0: Failed to create ports ================================================================== BUG: KASAN: use-after-free in mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904 Read of size 4 at addr ffff8880099dcfd8 by task kworker/u4:4/777 CPU: 1 PID: 777 Comm: kworker/u4:4 Not tainted 5.19.0-rc7-custom-126601-gfe26f28c586d #1 Hardware name: QEMU MSN4700, BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x92/0xbd lib/dump_stack.c:106 print_address_description mm/kasan/report.c:313 [inline] print_report.cold+0x5e/0x5cf mm/kasan/report.c:429 kasan_report+0xb9/0xf0 mm/kasan/report.c:491 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report_generic.c:306 mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904 mlxsw_sp_acl_region_rehash_intrvl_get+0x49/0x60 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c:1106 mlxsw_sp_params_acl_region_rehash_intrvl_get+0x33/0x80 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3854 devlink_param_get net/core/devlink.c:4981 [inline] devlink_nl_param_fill+0x238/0x12d0 net/core/devlink.c:5089 devlink_param_notify+0xe5/0x230 net/core/devlink.c:5168 devlink_ns_change_notify net/core/devlink.c:4417 [inline] devlink_ns_change_notify net/core/devlink.c:4396 [inline] devlink_reload+0x15f/0x700 net/core/devlink.c:4507 devlink_pernet_pre_exit+0x112/0x1d0 net/core/devlink.c:12272 ops_pre_exit_list net/core/net_namespace.c:152 [inline] cleanup_net+0x494/0xc00 net/core/net_namespace.c:582 process_one_work+0x9fc/0x1710 kernel/workqueue.c:2289 worker_thread+0x675/0x10b0 kernel/workqueue.c:2436 kthread+0x30c/0x3d0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> The buggy address belongs to the physical page: page:ffffea0000267700 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x99dc flags: 0x100000000000000(node=0|zone=1) raw: 0100000000000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880099dce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8880099dcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8880099dcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8880099dd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8880099dd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Fixes: 98bbf70c ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sun Shouxin authored
In my test, balance-alb bonding with two slaves eth0 and eth1, and then Bond0.150 is created with vlan id attached bond0. After adding bond0.150 into one linux bridge, I noted that Bond0, bond0.150 and bridge were assigned to the same MAC as eth0. Once bond0.150 receives a packet whose dest IP is bridge's and dest MAC is eth1's, the linux bridge will not match eth1's MAC entry in FDB, and not handle it as expected. The patch fix the issue, and diagram as below: eth1(mac:eth1_mac)--bond0(balance-alb,mac:eth0_mac)--eth0(mac:eth0_mac) | bond0.150(mac:eth0_mac) | bridge(ip:br_ip, mac:eth0_mac)--other port Suggested-by: Hu Yadi <huyd12@chinatelecom.cn> Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Clayton Yager authored
OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peilin Ye authored
Imagine two non-blocking vsock_connect() requests on the same socket. The first request schedules @connect_work, and after it times out, vsock_connect_timeout() sets *sock* state back to TCP_CLOSE, but keeps *socket* state as SS_CONNECTING. Later, the second request returns -EALREADY, meaning the socket "already has a pending connection in progress", even though the first request has already timed out. As suggested by Stefano, fix it by setting *socket* state back to SS_UNCONNECTED, so that the second request will return -ETIMEDOUT. Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peilin Ye authored
An O_NONBLOCK vsock_connect() request may try to reschedule @connect_work. Imagine the following sequence of vsock_connect() requests: 1. The 1st, non-blocking request schedules @connect_work, which will expire after 200 jiffies. Socket state is now SS_CONNECTING; 2. Later, the 2nd, blocking request gets interrupted by a signal after a few jiffies while waiting for the connection to be established. Socket state is back to SS_UNCONNECTED, but @connect_work is still pending, and will expire after 100 jiffies. 3. Now, the 3rd, non-blocking request tries to schedule @connect_work again. Since @connect_work is already scheduled, schedule_delayed_work() silently returns. sock_hold() is called twice, but sock_put() will only be called once in vsock_connect_timeout(), causing a memory leak reported by syzbot: BUG: memory leak unreferenced object 0xffff88810ea56a40 (size 1232): comm "syz-executor756", pid 3604, jiffies 4294947681 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 28 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............ backtrace: [<ffffffff837c830e>] sk_prot_alloc+0x3e/0x1b0 net/core/sock.c:1930 [<ffffffff837cbe22>] sk_alloc+0x32/0x2e0 net/core/sock.c:1989 [<ffffffff842ccf68>] __vsock_create.constprop.0+0x38/0x320 net/vmw_vsock/af_vsock.c:734 [<ffffffff842ce8f1>] vsock_create+0xc1/0x2d0 net/vmw_vsock/af_vsock.c:2203 [<ffffffff837c0cbb>] __sock_create+0x1ab/0x2b0 net/socket.c:1468 [<ffffffff837c3acf>] sock_create net/socket.c:1519 [inline] [<ffffffff837c3acf>] __sys_socket+0x6f/0x140 net/socket.c:1561 [<ffffffff837c3bba>] __do_sys_socket net/socket.c:1570 [inline] [<ffffffff837c3bba>] __se_sys_socket net/socket.c:1568 [inline] [<ffffffff837c3bba>] __x64_sys_socket+0x1a/0x20 net/socket.c:1568 [<ffffffff84512815>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84512815>] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae <...> Use mod_delayed_work() instead: if @connect_work is already scheduled, reschedule it, and undo sock_hold() to keep the reference count balanced. Reported-and-tested-by: syzbot+b03f55bf128f9a38f064@syzkaller.appspotmail.com Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Co-developed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Alonso authored
This reverts commit 36a15e1c. The usage of FLAG_SEND_ZLP causes problems to other firmware/hardware versions that have no issues. The FLAG_SEND_ZLP is not safe to use in this context. See: https://patchwork.ozlabs.org/project/netdev/patch/1270599787.8900.8.camel@Linuxdev4-laptop/#118378 The original problem needs another way to solve. Fixes: 36a15e1c ("net: usb: ax88179_178a needs FLAG_SEND_ZLP") Cc: stable@vger.kernel.org Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216327 Link: https://bugs.archlinux.org/task/75491Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Topi Miettinen authored
'IPv4 and IPv4' should be 'IPv4 and IPv6'. Signed-off-by: Topi Miettinen <toiwoton@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-6.0-20220810' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of 4 patches for net/master, with the whitespace issue fixed. Fedor Pchelkin contributes 2 fixes for the j1939 CAN protocol. A patch by me for the ems_usb driver fixes an unaligned access warning. Sebastian Würl's patch for the mcp251x driver fixes a race condition in the receive interrupt. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Matthias May says: ==================== Do not use RT_TOS for IPv6 flowlabel According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. ==================== Link: https://lore.kernel.org/r/20220805191906.9323-1-matthias.may@westermo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthias May authored
According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthias May authored
According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: ce99f6b9 ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthias May authored
According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 1400615d ("vxlan: allow setting ipv6 traffic class") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthias May authored
According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 3a56f86f ("geneve: handle ipv6 priority like ipv4 tos") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthias May authored
The current code retrieves the TOS field after the lookup on the ipv4 routing table. The routing process currently only allows routing based on the original 3 TOS bits, and not on the full 6 DSCP bits. As a result the retrieved TOS is cut to the 3 bits. However for inheriting purposes the full 6 bits should be used. Extract the full 6 bits before the route lookup and use that instead of the cut off 3 TOS bits. Fixes: e305ac6c ("geneve: Add support to collect tunnel metadata.") Signed-off-by: Matthias May <matthias.may@westermo.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Chia-Lin Kao (AceLan) authored
The final update statement of the for loop exceeds the array range, the dereference of self->aq_vec[i] is not checked and then leads to the index out of range error. Also fixed this kind of coding style in other for loop. [ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48 [ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]' [ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2 [ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022 [ 97.937611] Workqueue: events_unbound async_run_entry_fn [ 97.937616] Call Trace: [ 97.937617] <TASK> [ 97.937619] dump_stack_lvl+0x49/0x63 [ 97.937624] dump_stack+0x10/0x16 [ 97.937626] ubsan_epilogue+0x9/0x3f [ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 97.937629] ? __scm_send+0x348/0x440 [ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic] [ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic] [ 97.937644] aq_suspend_common+0x88/0x90 [atlantic] [ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic] [ 97.937653] pci_pm_suspend+0x7e/0x1a0 [ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0 [ 97.937657] dpm_run_callback+0x54/0x190 [ 97.937660] __device_suspend+0x14c/0x4d0 [ 97.937661] async_suspend+0x23/0x70 [ 97.937663] async_run_entry_fn+0x33/0x120 [ 97.937664] process_one_work+0x21f/0x3f0 [ 97.937666] worker_thread+0x4a/0x3c0 [ 97.937668] ? process_one_work+0x3f0/0x3f0 [ 97.937669] kthread+0xf0/0x120 [ 97.937671] ? kthread_complete_and_exit+0x20/0x20 [ 97.937672] ret_from_fork+0x22/0x30 [ 97.937676] </TASK> v2. fixed "warning: variable 'aq_vec' set but not used" v3. simplified a for loop Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
s/by caused/be caused/ s/ax88786/ax88796/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/7db4b622d2c3e5af58c1d1f32b81836f4af71f18.1659801746.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Harden set element field checks to avoid out-of-bound memory access, this patch also fixes the type of issue described in 7e6bc1f6 ("netfilter: nf_tables: stricter validation of element data") in a broader way. 2) Patches to restrict the chain, set, and rule id lookup in the transaction to the corresponding top-level table, patches from Thadeu Lima de Souza Cascardo. 3) Fix incorrect comment in ip6t_LOG.h 4) nft_data_init() performs upfront validation of the expected data. struct nft_data_desc is used to describe the expected data to be received from userspace. The .size field represents the maximum size that can be stored, for bound checks. Then, .len is an input/output field which stores the expected length as input (this is optional, to restrict the checks), as output it stores the real length received from userspace (if it was not specified as input). This patch comes in response to 7e6bc1f6 ("netfilter: nf_tables: stricter validation of element data") to address this type of issue in a more generic way by avoid opencoded data validation. Next patch requires this as a dependency. 5) Disallow jump to implicit chain from set element, this configuration is invalid. Only allow jump to chain via immediate expression is supported at this stage. 6) Fix possible null-pointer derefence in the error path of table updates, if memory allocation of the transaction fails. From Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fix null deref due to zeroed list head netfilter: nf_tables: disallow jump to implicit chain from set element netfilter: nf_tables: upfront validation of data via nft_data_init() netfilter: ip6t_LOG: Fix a typo in a comment netfilter: nf_tables: do not allow RULE_ID to refer to another chain netfilter: nf_tables: do not allow CHAIN_ID to refer to another table netfilter: nf_tables: do not allow SET_ID to refer to another table netfilter: nf_tables: validate variable length element extension ==================== Link: https://lore.kernel.org/r/20220809220532.130240-1-pablo@netfilter.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 09 Aug, 2022 7 commits
-
-
Sebastian Würl authored
The mcp251x driver uses both receiving mailboxes of the CAN controller chips. For retrieving the CAN frames from the controller via SPI, it checks once per interrupt which mailboxes have been filled and will retrieve the messages accordingly. This introduces a race condition, as another CAN frame can enter mailbox 1 while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until the interrupt handler is called next, mailbox 0 is emptied before mailbox 1, leading to out-of-order CAN frames in the network device. This is fixed by checking the interrupt flags once again after freeing mailbox 0, to correctly also empty mailbox 1 before leaving the handler. For reproducing the bug I created the following setup: - Two CAN devices, one Raspberry Pi with MCP2515, the other can be any. - Setup CAN to 1 MHz - Spam bursts of 5 CAN-messages with increasing CAN-ids - Continue sending the bursts while sleeping a second between the bursts - Check on the RPi whether the received messages have increasing CAN-ids - Without this patch, every burst of messages will contain a flipped pair v3: https://lore.kernel.org/all/20220804075914.67569-1-sebastian.wuerl@ororatech.com v2: https://lore.kernel.org/all/20220804064803.63157-1-sebastian.wuerl@ororatech.com v1: https://lore.kernel.org/all/20220803153300.58732-1-sebastian.wuerl@ororatech.com Fixes: bf66f373 ("can: mcp251x: Move to threaded interrupts instead of workqueues.") Signed-off-by: Sebastian Würl <sebastian.wuerl@ororatech.com> Link: https://lore.kernel.org/all/20220804081411.68567-1-sebastian.wuerl@ororatech.com [mkl: reduce scope of intf1, eflag1] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Florian Westphal authored
WARNING: suspicious RCU usage 5.2.0-rc2-00605-g2638eb8b #1 Not tainted drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage! plip_open is called with RTNL held, switch to the correct helper. Fixes: 2638eb8b ("net: ipv4: provide __rcu annotation for ifa_list") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sandor Bodo-Merle authored
On one of our machines we got: kernel BUG at lib/dynamic_queue_limits.c:27! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1 Hardware name: BRCM XGS iProc task: ee3415c0 task.stack: ee32a000 PC is at dql_completed+0x168/0x178 LR is at bgmac_poll+0x18c/0x6d8 pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313 sp : ee32be14 ip : 000005ea fp : 00000bd4 r10: ee558500 r9 : c0116298 r8 : 00000002 r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851 r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 12c5387d Table: 8e88c04a DAC: 00000051 Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210) Stack: (0xee32be14 to 0xee32c000) be00: ee558520 ee52c100 ef128810 be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040 be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040 be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98 bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8 bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000 bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520 bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900 bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28 bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70 bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000 bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8) [<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494) [<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c) [<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98) [<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98) [<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0) [<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158) [<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24) Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7) The issue seems similar to commit 90b3b339 ("net: hisilicon: Fix a BUG trigered by wrong bytes_compl") and potentially introduced by commit b38c83dd ("bgmac: simplify tx ring index handling"). If there is an RX interrupt between setting ring->end and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free() can miscalculate the queue size while called from bgmac_poll(). The machine which triggered the BUG runs a v4.14 RT kernel - but the issue seems present in mainline too. Fixes: b38c83dd ("bgmac: simplify tx ring index handling") Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220808173939.193804-1-sbodomerle@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0 Fixes: 7a29d220 ("net: dsa: felix: reimplement tagging protocol change with function pointers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220808125127.3344094-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.0 First set of fixes for v6.0. Small one this time, fix a cfg80211 warning seen with brcmfmac and remove an unncessary inline keyword from wilc1000. * tag 'wireless-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: wilc1000: fix spurious inline in wilc_handle_disconnect() wifi: cfg80211: Fix validating BSS pointers in __cfg80211_connect_result ==================== Link: https://lore.kernel.org/r/20220809164756.B1DAEC433D6@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Westphal authored
In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a null dereference: BUG: KASAN: null-ptr-deref in nft_trans_destroy+0x26/0x59 Call Trace: nft_trans_destroy+0x26/0x59 nf_tables_newtable+0x4bc/0x9bc [..] Its sane to assume that nft_trans_destroy() can be called on the transaction object returned by nft_trans_alloc(), so make sure the list head is initialised. Fixes: 55dd6f93 ("netfilter: nf_tables: use new transaction infrastructure to handle table") Reported-by: mingi cho <mgcho.minic@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Extend struct nft_data_desc to add a flag field that specifies nft_data_init() is being called for set element data. Use it to disallow jump to implicit chain from set element, only jump to chain via immediate expression is allowed. Fixes: d0e2c7de ("netfilter: nf_tables: add NFT_CHAIN_BINDING") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-