- 08 Dec, 2020 9 commits
-
-
Nathan Lynch authored
update_dt_node() has a switch statement where the default case lacks a break statement. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201207215200.1785968-9-nathanl@linux.ibm.com
-
Nathan Lynch authored
Treat the absence of the ibm,update-nodes function as benign instead of reporting an error. If the platform does not provide that facility, it's not a problem for Linux. Signed-off-by:
-
Nathan Lynch authored
H_VASI_SIGNAL can be used by a partition to request cancellation of its migration. To be used in future changes. Signed-off-by:
-
Nathan Lynch authored
Provide a documented wrapper function for the ibm,activate-firmware service, which must be called after a partition migration or hibernation. If the function is absent or the call fails, the OS will continue to run normally with the current firmware, so there is no need to perform any recovery. Just log it and continue. Signed-off-by:
-
Nathan Lynch authored
Now that the name is available, provide a simple wrapper for ibm,suspend-me which returns both a Linux errno and optionally the actual RTAS status to the caller. Signed-off-by:
-
Nathan Lynch authored
The pseries partition suspend sequence requires that all active CPUs call H_JOIN, which suspends all but one of them with interrupts disabled. The "chosen" CPU is then to call ibm,suspend-me to complete the suspend. Upon returning from ibm,suspend-me, the chosen CPU is to use H_PROD to wake the joined CPUs. Using on_each_cpu() for this, as rtas_ibm_suspend_me() does to implement partition migration, is susceptible to deadlock with other users of on_each_cpu() and with users of stop_machine APIs. The callback passed to on_each_cpu() is not allowed to synchronize with other CPUs in the way it is used here. Complicating the fix is the fact that rtas_ibm_suspend_me() also occupies the function name that should be used to provide a more conventional wrapper for ibm,suspend-me. Rename rtas_ibm_suspend_me() to rtas_ibm_suspend_me_unsafe() to free up the name and indicate that it should not gain users. Signed-off-by:
-
Nathan Lynch authored
We don't completely account for the possible return codes for ibm,suspend-me. Add definitions for these. Signed-off-by:
-
Nathan Lynch authored
While drmgr has had work in some areas to make its RTAS syscall interactions endian-neutral, its code for performing partition migration via the syscall has never worked on LE. While it is able to complete ibm,suspend-me successfully, it crashes when attempting the subsequent ibm,update-nodes call. drmgr is the only known (or plausible) user of ibm,suspend-me, ibm,update-nodes, and ibm,update-properties, so allow them only in big-endian configurations. Signed-off-by:
-
Aneesh Kumar K.V authored
This partially reverts commit eb232b16 ("powerpc/book3s64/kuap: Improve error reporting with KUAP") and update the fault handler to print [ 55.022514] Kernel attempted to access user page (7e6725b70000) - exploit attempt? (uid: 0) [ 55.022528] BUG: Unable to handle kernel data access on read at 0x7e6725b70000 [ 55.022533] Faulting instruction address: 0xc000000000e8b9bc [ 55.022540] Oops: Kernel access of bad area, sig: 11 [#1] .... when the kernel access userspace address without unlocking AMR. bad_kuap_fault() is added as part of commit 5e5be3ae ("powerpc/mm: Detect bad KUAP faults") to catch userspace access incorrectly blocked by AMR. Hence retain the full stack dump there even with hash translation. Also, add a comment explaining the difference between hash and radix. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
- 07 Dec, 2020 2 commits
-
-
Jordan Niethe authored
On Power9, CIABR is lost after idle. This means that instruction breakpoints set by xmon which use CIABR do not work. Fix this by restoring CIABR after idle. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Jordan Niethe authored
The value in CIABR persists across kexec which can lead to unintended results when the new kernel hits the old kernel's breakpoint. For example: 0:mon> bi $loadavg_proc_show 0:mon> b type address 1 inst c000000000519060 loadavg_proc_show+0x0/0x130 0:mon> x $ kexec -l /mnt/vmlinux --initrd=/mnt/rootfs.cpio.gz --append='xmon=off' $ kexec -e $ cat /proc/loadavg Trace/breakpoint trap Make sure CIABR is cleared so this does not happen. Signed-off-by:
-
- 05 Dec, 2020 2 commits
-
-
Christophe Leroy authored
ppc601 and e200 were the users of ucache_bsize. ppc601 and e200 are now gone. Remove ucache_bsize. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
There is no defconfig selecting CONFIG_E200, and no platform. e200 is an earlier version of booke, a predecessor of e500, with some particularities like an unified cache instead of both an instruction cache and a data cache. Remove it. Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
- 04 Dec, 2020 4 commits
-
-
Christophe Leroy authored
In several places, inline assembly uses the "%Un" modifier to enable the use of instruction with update form addressing, but the associated "<>" constraint is missing. As mentioned in previous patch, this fails with gcc 4.9, so "<>" can't be used directly. Use UPD_CONSTR macro everywhere %Un modifier is used. Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Mathieu Desnoyers authored
The placeholder for instruction selection should use the second argument's operand, which is %1, not %0. This could generate incorrect assembly code if the memory addressing of operand %0 is a different form from that of operand %1. Also remove the %Un placeholder because having %Un placeholders for two operands which are based on the same local var (ptep) doesn't make much sense. By the way, it doesn't change the current behaviour because "<>" constraint is missing for the associated "=m". [chleroy: revised commit log iaw segher's comments and removed %U0] Fixes: 9bf2b5cd ("powerpc: Fixes for CONFIG_PTE_64BIT for SMP support") Cc: <stable@vger.kernel.org> # v2.6.28+ Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Christophe Leroy authored
Since some time now, printk() adds carriage return, leading to unusable xmon output if there is no udbg backend available: [ 54.288722] sysrq: Entering xmon [ 54.292209] Vector: 0 at [cace3d2c] [ 54.292274] pc: [ 54.292331] c0023650 [ 54.292468] : xmon+0x28/0x58 [ 54.292519] [ 54.292574] lr: [ 54.292630] c0023724 [ 54.292749] : sysrq_handle_xmon+0xa4/0xfc [ 54.292801] [ 54.292867] sp: cace3de8 [ 54.292931] msr: 9032 [ 54.292999] current = 0xc28d0000 [ 54.293072] pid = 377, comm = sh [ 54.293157] Linux version 5.10.0-rc6-s3k-dev-01364-gedf13f0ccd76-dirty (root@po17688vm.idsi0.si.c-s.fr) (powerpc64-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34) #4211 PREEMPT Fri Dec 4 09:32:11 UTC 2020 [ 54.293287] enter ? for help [ 54.293470] [cace3de8] [ 54.293532] c0023724 [ 54.293654] sysrq_handle_xmon+0xa4/0xfc [ 54.293711] (unreliable) ... [ 54.296002] [ 54.296159] --- Exception: c01 (System Call) at [ 54.296217] 0fd4e784 [ 54.296303] [ 54.296375] SP (7fca6ff0) is in userspace [ 54.296431] mon> [ 54.296484] <no input ...> Use pr_cont() instead. Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
-
Alexey Kardashevskiy authored
We execute certain NPU2 setup code (such as mapping an LPID to a device in NPU2) unconditionally if an Nvlink bridge is detected. However this cannot succeed on POWER8NVL machines and errors appear in dmesg. This is harmless as skiboot returns an error and the only place we check it is vfio-pci but that code does not get called on P8+ either. This adds a check if pnv_npu2_xxx helpers are called on a machine with NPU2 which initializes pnv_phb::npu in pnv_npu2_init(); pnv_phb::npu==NULL on POWER8/NVL (Naples). While at this, fix NULL derefencing in pnv_npu_peers_take_ownership/ pnv_npu_peers_release_ownership which occurs when GPUs on mentioned P8s cause EEH which happens if "vfio-pci" disables devices using the D3 power state; the vfio-pci's disable_idle_d3 module parameter controls this and must be set on Naples. The EEH handling clears the entire pnv_ioda_pe struct in pnv_ioda_free_pe() hence the NULL derefencing. We cannot recover from that but at least we stop crashing. Tested on - POWER9 pvr=004e1201, Ubuntu 19.04 host, Ubuntu 18.04 vm, NVIDIA GV100 10de:1db1 driver 418.39 - POWER8 pvr=004c0100, RHEL 7.6 host, Ubuntu 16.10 vm, NVIDIA P100 10de:15f9 driver 396.47 Fixes: 1b785611 ("powerpc/powernv/npu: Add release_ownership hook") Cc: stable@vger.kernel.org # 5.0 Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 03 Dec, 2020 23 commits
-
-
Ganesh Goudar authored
To check machine check handling, add support to inject slb multihit errors. Co-developed-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> [mpe: Use CONFIG_PPC_BOOK3S_64 to fix compile errors reported by lkp@intel.com] Signed-off-by:
-
Oliver O'Halloran authored
If the platform decides to block enabling the device nothing is printed currently. This can lead to some confusion since the dmesg output will usually print an error with no context e.g. e1000e: probe of 0022:01:00.0 failed with error -22 This shouldn't be spammy since pci_enable_device() already prints a messages when it succeeds. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed. This problem can be fixed by adding the corresponding unmap operation when the device is removed. There's no pcibios_* hook for the remove case, but the same effect can be achieved using a bus notifier. Because INTx are shared among PHBs (and potentially across the system), this adds tracking of virq to unmap them only when the last user is gone. [aik: added refcounter] Signed-off-by:
Cédric Le Goater <clg@kaod.org> Reviewed-by:
Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by:
-
Daniel Axtens authored
It's sometimes handy to have a config that boots a bit like a system under secure boot (forcing lockdown=integrity, without needing any extra stuff like a command line option). This config file allows that, and also turns on a few assorted security and hardening options for good measure. Suggested-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Christophe Leroy authored
440/460 variants and 470 variants are not compatible, no need to make code supporting both and using MMU features. Just use CONFIG_PPC_47x to decide what to build. Signed-off-by:
-
Christophe Leroy authored
As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not compatible with 440 and 460 variants. This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different for 47x, meaning a kernel built for 47x will not run correctly on a 440. In cputable, opt out all 440 and 460 variants when CONFIG_PPC_47x is set. Also add a default match dedicated to 470. Signed-off-by:
-
Christophe Leroy authored
CPU_FTR_NODSISRALIGN has not been used since commit 31bfdb03 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Remove it. Signed-off-by:
-
Christophe Leroy authored
MMU_FTR_PPCAS_ARCH_V2 is defined in cpu_table.h as MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE. MMU_FTR_TLBIEL and MMU_FTR_16M_PAGE are defined in mmu.h MMU_FTR_PPCAS_ARCH_V2 is used only in mmu.h and it is used only once. Remove MMU_FTR_PPCAS_ARCH_V2 and use directly MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE Signed-off-by:
-
Christophe Leroy authored
Only mpc83xx will set MMU_FTR_NEED_DTLB_SW_LRU and its definition is enclosed in #ifdef CONFIG_PPC_83xx. Make MMU_FTR_NEED_DTLB_SW_LRU possible only when CONFIG_PPC_83xx is set. Signed-off-by:
-
Christophe Leroy authored
Since commit 10b35d99 ("[PATCH] powerpc: merged asm/cputable.h"), CPU_FTR_COHERENT_ICACHE has always been defined. Remove the #ifndef CPU_FTR_COHERENT_ICACHE block. Signed-off-by:
-
Christophe Leroy authored
G2_LE has a 603 core, add CPU_FTR_NOEXECUTE. Fixes: 385e89d5 ("powerpc/mm: add exec protection on powerpc 603") Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
MMU_FTR_TYPE_44x cannot be checked by cpu_has_feature() Use mmu_has_feature() instead Fixes: 23eb7f56 ("powerpc: Convert flush_icache_range & friends to C") Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
SPRN_VTB and CPU_FTR_ARCH_207S are always defined, no need of an ifdef. Signed-off-by:
-
Christophe Leroy authored
Use SPRN_SPRG_SCRATCH2 as a third scratch register in exception prologs in order to simplify them and avoid data going back and forth from/to CR. Signed-off-by:
-
Christophe Leroy authored
Use SPRN_SPRG_SCRATCH2 as an alternative scratch register in the early part of DSI prolog in order to avoid clobbering SPRN_SPRG_SCRATCH0/1 used by other prologs. The 603 doesn't like a jump from DataLoadTLBMiss to the 10 nops that are now in the beginning of DSI exception as a result of the feature section. To workaround this, add a jump as alternative. It also avoids fetching 10 nops for nothing. Signed-off-by:
-
Christophe Leroy authored
Make code more readable with a clear CONFIG_VMAP_STACK section and a clear non CONFIG_VMAP_STACK section. Signed-off-by:
-
Christophe Leroy authored
On the 603, SDR1 is not used. In order to free SPRN_SPRG2, use SPRN_SDR1 to store the pgdir phys addr. But only some bits of SDR1 can be used (0xffff01ff). As the pgdir is 4k aligned, rotate it by 4 bits to the left. Signed-off-by:
-
Christophe Leroy authored
SPRN_SPRG_PGDIR is there mainly to speedup SW TLB miss handlers for powerpc 603. We need to free SPRN_SPRG2 to reduce the mess with CONFIG_VMAP_STACK. In hash_page(), reading PGDIR from thread_struct will be in the noise performance wise. Signed-off-by:
-
Christophe Leroy authored
An FTR_SECTION_ELSE is in the middle of BEGIN_MMU_FTR_SECTION/ALT_MMU_FTR_SECTION_END_IFSET Change it to MMU_FTR_SECTION_ELSE Signed-off-by:
-
Christophe Leroy authored
We now always map kernel text with BATs. Neither need to preload hash with kernel text addresses nor ensure they are never evicted. This is more or less a revert of commit ee4f2ea4 ("[POWERPC] Fix 32-bit mm operations when not using BATs") Signed-off-by:
-
Christophe Leroy authored
Since commit 2b279c03 ("powerpc/32s: Allow mapping with BATs with DEBUG_PAGEALLOC"), there is no real situation where mapping without BATs is required. In order to simplify memory handling, always map kernel text and rodata with BATs even when "nobats" kernel parameter is set. Also fix the 603 TLB miss exceptions that don't require anymore kernel page table if DEBUG_PAGEALLOC. Signed-off-by:
-
Christophe Lombard authored
Add specific kernel traces which provide information on mmu notifier and on pages range. Signed-off-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by:
-
Christophe Lombard authored
Add invalidate_range mmu notifier, when required (ATSD access of MMIO registers is available), to initiate TLB invalidation commands. For the time being, the ATSD0 set of registers is used by default. The pasid and bdf values have to be configured in the Process Element Entry. The PEE must be set up to match the BDF/PASID of the AFU. Signed-off-by:
-
