- 24 Sep, 2021 2 commits
-
-
Amit Cohen authored
Currently, there are several functions that handle 'struct ip_tunnel_parm' and 'struct __ip6_tnl_parm'. Change the mentioned functions to get IP tunnel parameters by reference and as 'const'. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
mlxsw_sp_fib4_entry_type_unset() is not specific for IPv4 FIB entry, move the code to mlxsw_sp_fib_entry_type_unset(), and call this function from mlxsw_sp_fib4_entry_type_unset() so then it will be used for IPv6 also. Signed-off-by:
-
- 23 Sep, 2021 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
net/mptcp/protocol.c 977d293e ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ff ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ... -
Shakeel Butt authored
Prior to the commit 7e1c0d6f ("memcg: switch lruvec stats to rstat") and the commit aa48e47e ("memcg: infrastructure to flush memcg stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus * 32) at worst and for unbounded amount of time. The commit aa48e47e moved the lruvec stats to rstat infrastructure and the commit 7e1c0d6f bounded the error for all the lruvec stats to (nr_cpus * 32) at worst for at most 2 seconds. More specifically it decoupled the number of stats and the number of cgroups from the error rate. However this reduction in error comes with the cost of triggering the slowpath of stats update more frequently. Previously in the slowpath the kernel adds the stats up the memcg tree. After aa48e47e, the kernel triggers the asyn lruvec stats flush through queue_work(). This causes regression reports from 0day kernel bot [1] as well as from phoronix test suite [2]. We tried two options to fix the regression: 1) Increase the threshold to trigger the slowpath in lruvec stats update codepath from 32 to 512. 2) Remove the slowpath from lruvec stats update codepath and instead flush the stats in the page refault codepath. The assumption is that the kernel timely flush the stats, so, the update tree would be small in the refault codepath to not cause the preformance impact. Following are the results of will-it-scale/page_fault[1|2|3] benchmark on four settings i.e. (1) 5.15-rc1 as baseline (2) 5.15-rc1 with aa48e47e and 7e1c0d6f reverted (3) 5.15-rc1 with option-1 (4) 5.15-rc1 with option-2. test (1) (2) (3) (4) pg_f1 368563 406277 (10.23%) 399693 (8.44%) 416398 (12.97%) pg_f2 338399 372133 (9.96%) 369180 (9.09%) 381024 (12.59%) pg_f3 500853 575399 (14.88%) 570388 (13.88%) 576083 (15.02%) From the above result, it seems like the option-2 not only solves the regression but also improves the performance for at least these benchmarks. Feng Tang (intel) ran the aim7 benchmark with these two options and confirms that option-1 reduces the regression but option-2 removes the regression. Michael Larabel (phoronix) ran multiple benchmarks with these options and reported the results at [3] and it shows for most benchmarks option-2 removes the regression introduced by the commit aa48e47e ("memcg: infrastructure to flush memcg stats"). Based on the experiment results, this patch proposed the option-2 as the solution to resolve the regression. Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020 [1] Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress [2] Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104 [3] Fixes: aa48e47e ("memcg: infrastructure to flush memcg stats") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Tested-by:
Michael Larabel <Michael@phoronix.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hillf Danton <hdanton@sina.com>, Cc: Michal Koutný <mkoutny@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sudarsana Reddy Kalluru authored
After fixing hibernation resume flow, another usecase was found which should be explicitly handled - resume when device is in "down" state. Invoke aq_nic_init jointly with aq_nic_start only if ndev was already up during suspend/hibernate. We still need to perform nic_deinit() if caller requests for it, to handle the freeze/resume scenarios. Fixes: 57f780f1 ("atlantic: Fix driver resume flow.") Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Aya Levin authored
Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by:
Aya Levin <ayal@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
The blamed commit made the fatally incorrect assumption that ports which aren't in the FORWARDING STP state should not have packets forwarded towards them, and that is all that needs to be done. However, that logic alone permits BLOCKING ports to forward to FORWARDING ports, which of course allows packet storms to occur when there is an L2 loop. The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge do for you", but "what can you do for the bridge". This way, only FORWARDING ports forward to the other FORWARDING ports from the same bridging domain, and we are still compatible with the idea of multiple bridges. Fixes: df291e54 ("net: ocelot: support multiple bridges") Suggested-by:
Colin Foster <colin.foster@in-advantage.com> Reported-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Felix Fietkau authored
Sometimes multiple CLS_REPLACE calls are issued for the same connection. rhashtable_insert_fast does not check for these duplicates, so multiple hardware flow entries can be created. Fix this by checking for an existing entry early Fixes: 502e84e2 ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Now that the sja1105 driver is finally sane enough again to stop having a ternary VLAN awareness state, we can remove priv->vlan_aware and query DSA for the ds->vlan_filtering value (for SJA1105, VLAN filtering is a global property). Also drop the paranoid checking that DSA calls ->port_vlan_filtering multiple times without the VLAN awareness state changing. It doesn't, the same check is present inside dsa_port_vlan_filtering too. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Mark Brown authored
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding the part name used in the compatible to the list of SPI IDs. Fixes: 96c8395e ("spi: Revert modalias changes") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Guvenc Gulce authored
Remove myself as net/smc maintainer, as I am leaving IBM soon and can not maintain net/smc anymore. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== net: remove sk skb caches Eric noted we would be better off reverting the sk skb caches. MPTCP relies on such a feature, so we need a little refactor of the MPTCP tx path before the mentioned revert. The first patch exposes additional TCP helpers. The 2nd patch changes the MPTCP code to do locally the whole skb allocation and updating, so it does not rely anymore on core TCP helpers for that nor the sk skb cache. As a side effect, we can make the tcp_build_frag helper static. Finally, we can pull Eric's revert. RFC -> v1: - drop driver specific patch - no more needed after helper rename - rename skb_entail -> tcp_skb_entail (Eric) - preserve the tcp_build_frag helpwe, just make it static (Eric) ==================== Signed-off-by: -
Eric Dumazet authored
This reverts the following patches : - commit 2e05fcae ("tcp: fix compile error if !CONFIG_SYSCTL") - commit 4f661542 ("tcp: fix zerocopy and notsent_lowat issues") - commit 472c2e07 ("tcp: add one skb cache for tx") - commit 8b27dae5 ("tcp: add one skb cache for rx") Having a cache of one skb (in each direction) per TCP socket is fragile, since it can cause a significant increase of memory needs, and not good enough for high speed flows anyway where more than one skb is needed. We want instead to add a generic infrastructure, with more flexible per-cpu caches, for alien NUMA nodes. Acked-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Paolo Abeni authored
After the previous patch the mentioned helper is used only inside its compilation unit: let's make it static. RFC -> v1: - preserve the tcp_build_frag() helper (Eric) Signed-off-by:
-
Paolo Abeni authored
We want to revert the skb TX cache, but MPTCP is currently using it unconditionally. Rework the MPTCP tx code, so that tcp_tx_skb_cache is not needed anymore: do the whole coalescing check, skb allocation skb initialization/update inside mptcp_sendmsg_frag(), quite alike the current TCP code. Reviewed-by:
-
Paolo Abeni authored
the tcp_skb_entail() helper is actually skb_entail(), renamed to provide proper scope. The two helper will be used by the next patch. RFC -> v1: - rename skb_entail to tcp_skb_entail (Eric) Acked-by: -
Paolo Abeni authored
Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com Fixes: 1094c6fe ("mptcp: fix possible divide by zero") Signed-off-by:
-
Vladimir Oltean authored
The driver only needs the reset GPIO for a very brief period, so instead of using devres and keeping the descriptor pointer inside priv, just use that descriptor inside the sja1105_hw_reset function and then let go of it. Also use gpiod_get_optional while at it, and error out on real errors (bad flags etc). Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fix circular dependency between sja1105 and tag_sja1105 As discussed here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocols cannot use symbols exported by switch drivers. Eliminate the two instances of that from tag_sja1105, and that allows us to have a working setup with modules again. ==================== Signed-off-by:
-
Vladimir Oltean authored
It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/Signed-off-by:
-
Vladimir Oltean authored
The problem is that DSA tagging protocols really must not depend on the switch driver, because this creates a circular dependency at insmod time, and the switch driver will effectively not load when the tagging protocol driver is missing. The code was structured in the way it was for a reason, though. The DSA driver-facing API for PTP timestamping relies on the assumption that two-step TX timestamps are provided by the hardware in an out-of-band manner, typically by raising an interrupt and making that timestamp available inside some sort of FIFO which is to be accessed over SPI/MDIO/etc. So the API puts .port_txtstamp into dsa_switch_ops, because it is expected that the switch driver needs to save some state (like put the skb into a queue until its TX timestamp arrives). On SJA1110, TX timestamps are provided by the switch as Ethernet packets, so this makes them be received and processed by the tagging protocol driver. This in itself is great, because the timestamps are full 64-bit and do not require reconstruction, and since Ethernet is the fastest I/O method available to/from the switch, PTP timestamps arrive very quickly, no matter how bottlenecked the SPI connection is, because SPI interaction is not needed at all. DSA's code structure and strict isolation between the tagging protocol driver and the switch driver break the natural code organization. When the tagging protocol driver receives a packet which is classified as a metadata packet containing timestamps, it passes those timestamps one by one to the switch driver, which then proceeds to compare them based on the recorded timestamp ID that was generated in .port_txtstamp. The communication between the tagging protocol and the switch driver is done through a method exported by the switch driver, sja1110_process_meta_tstamp. To satisfy build requirements, we force a dependency to build the tagging protocol driver as a module when the switch driver is a module. However, as explained in the first paragraph, that causes the circular dependency. To solve this, move the skb queue from struct sja1105_private :: struct sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data. The latter is a data structure for which hacks have already been put into place to be able to create persistent storage per switch that is accessible from the tagging protocol driver (see sja1105_setup_ports). With the skb queue directly accessible from the tagging protocol driver, we can now move sja1110_process_meta_tstamp into the tagging driver itself, and avoid exporting a symbol. Fixes: 566b18c8 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/Signed-off-by:
-
Vladimir Oltean authored
It looks like this field was never used since its introduction in commit 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports") remove it. Signed-off-by:
-
Ido Schimmel authored
syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline] [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline] [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline] [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline] [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline] [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409 [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463 [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492 [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline] [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline] [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499 Fixes: 2a014b20 ("mlxsw: spectrum_router: Add support for nexthop objects") Signed-off-by:
-
- 22 Sep, 2021 16 commits
-
-
Geert Uytterhoeven authored
Commit f8ade8dd ("xsurf100: drop include of lib8390.c") accidentally changed init/main.c. Revert that part. Fixes: f8ade8dd ("xsurf100: drop include of lib8390.c") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Juergen, Roger, and Stefano. Thank you! Acked-by:
Juergen Gross <jgross@suse.com> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Acked-by:
Stefano Stabellini <sstabellini@kernel.org> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Christoph Hellwig. Thank you! Acked-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Dinh Nguyen authored
Ley Foon has left Intel and will no longer be able to maintain NIOS2. Update the MAINTAINER's entry to Dinh Nguyen. Acked-by:
Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi modalias fix from Mark Brown: "Fix modalias issues As reported by Russell King the change to use OF style modaliases for DT enumerated broke at least the spi-nor driver, the patch here reverts that change to fix the regression. Sadly this will mean that anything that started loading since the change to OF modaliases will run into issues, there doesn't seem to be any approach which doesn't cause some problems and thi seems like the least bad approach - gory details are in the commit log for the change. I'm currently working through the SPI drivers to add ID tables and missing IDs to tables which should address things from the other end, this seems more straightforward and robust than any other options" * tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Revert modalias changes
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: "Critical bug fixes: - Fix crash in NLM TEST procedure - NFSv4.1+ backchannel not restored after PATH_DOWN" * tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN NLM: Fix svcxdr_encode_owner()
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "The first round of bug-fixes for platform-drivers-x86 for 5.15, highlights: - amd-pmc fix for some suspend/resume issues - intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting - some build error/warning fixes - various DMI quirk additions" * tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX platform/x86/intel: hid: Add DMI switches allow list platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error platform/x86: amd-pmc: Increase the response register timeout platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet lg-laptop: Correctly handle dmi_get_system_info() returning NULL platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()
-
Jiri Slaby authored
linux@prisktech.co.nz is defunct: 4.1.2 <linux@prisktech.co.nz>: Recipient address rejected: Domain not found Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Paolo Abeni authored
Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com Fixes: 1094c6fe ("mptcp: fix possible divide by zero") Signed-off-by:
-
Shai Malin authored
If the HW device is during recovery, the HW resources will never return, hence we shouldn't wait for the CID (HW context ID) bitmaps to clear. This fix speeds up the error recovery flow. Fixes: 64515dc8 ("qed: Add infrastructure for error detection and recovery") Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Alter trap adjacency entry allocation scheme In commit 0c3cbbf9 ("mlxsw: Add specific trap for packets routed via invalid nexthops"), mlxsw started allocating a new adjacency entry during driver initialization, to trap packets routed via invalid nexthops. This behavior was later altered in commit 983db619 ("mlxsw: spectrum_router: Allocate discard adjacency entry when needed") to only allocate the entry upon the first route that requires it. The motivation for the change is explained in the commit message. The problem with the current behavior is that the entry shows up as a "leak" in a new BPF resource monitoring tool [1]. This is caused by the asymmetry of the allocation/free scheme. While the entry is allocated upon the first route that requires it, it is only freed during de-initialization of the driver. Instead, this patchset tracks the number of active nexthop groups and allocates the adjacency entry upon the creation of the first group. The entry is freed when the number of active groups reaches zero. Patch #1 adds the new entry. Patch #2 converts mlxsw to start using the new entry and removes the old one. ==================== Signed-off-by:
-
Ido Schimmel authored
Start using the trap adjacency entry that was added in the previous patch and remove the existing one which is no longer needed. Note that the name of the old entry was inaccurate as the entry did not discard packets, but trapped them. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
In commit 0c3cbbf9 ("mlxsw: Add specific trap for packets routed via invalid nexthops"), mlxsw started allocating a new adjacency entry during driver initialization, to trap packets routed via invalid nexthops. This behavior was later altered in commit 983db619 ("mlxsw: spectrum_router: Allocate discard adjacency entry when needed") to only allocate the entry upon the first route that requires it. The motivation for the change is explained in the commit message. The problem with the current behavior is that the entry shows up as a "leak" in a new BPF resource monitoring tool [1]. This is caused by the asymmetry of the allocation/free scheme. While the entry is allocated upon the first route that requires it, it is only freed during de-initialization of the driver. Instead, track the number of active nexthop groups and allocate the adjacency entry upon the creation of the first group. Free it when the number of active groups reaches zero. The next patch will convert mlxsw to start using the new entry and remove the old one. [1] https://github.com/Mellanox/mlxsw/tree/master/Debugging/libbpf-tools/resmonSigned-off-by:
-
M Chetan Kumar authored
1> Function comments moved to .c file. 2> Use literals in return to improve readability. 3> Do error handling check instead of success check. 4> Redundant ret assignment removed. Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
-
Li RongQing authored
Avoid to call ksize again in __build_skb_around by passing the result of data ksize to __build_skb_around nginx stress test shows this change can reduce ksize cpu usage, and give a little performance boost Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Leon Romanovsky authored
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Acked-by:
Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by:
-
