macsec_upd_offload() gets the value of MACSEC_OFFLOAD_ATTR_TYPE
without checking its presence in the request message, and this causes
a NULL dereference. Fix it rejecting any configuration that does not
include this attribute.

Reported-and-tested-by: syzbot+7022ab7c383875c17eff@syzkaller.appspotmail.com
Fixes: dcb780fb ("net: macsec: add nla support for changing the offloading selection")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed the punctuation and some typos.
Improved some sentences with minor changes.

No change of semantics or code.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the bcm_sf2 was converted into a proper platform device driver and
used the new dsa_register_switch() interface, we would still be parsing
the legacy DSA node that contained all the port information since the
platform firmware has intentionally maintained backward and forward
compatibility to client programs. Ensure that we do parse the correct
node, which is "ports" per the revised DSA binding.

Fixes: d9338023 ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable 'rc' is being assigned a value that is never read
and it is being updated later with a new value. The assignment
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function i2400m_bm_buf_alloc there is no need to use a variable
'result' to return -ENOMEM, just return the literal value. In the
function i2400m_setup the variable 'result' is initialized with a
value that is never read, it is a redundant assignment that can
be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_{VLAN_MANGLE, PRIORITY}

Petr says:

The handlers for FLOW_ACTION_VLAN_MANGLE and FLOW_ACTION_PRIORITY end by
returning whatever the lower-level function that they call returns. If
there are more actions lined up after one of these actions, those are
never offloaded. Each of the two patches fixes one of those actions.

v2:
* Patch #1: Use valid SHA1 ID in Fixes line (Dave)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The handler for FLOW_ACTION_VLAN_MANGLE ends by returning whatever the
lower-level function that it calls returns. If there are more actions lined
up after this action, those are never offloaded. Fix by only bailing out
when the called function returns an error.

Fixes: a150201a ("mlxsw: spectrum: Add support for vlan modify TC action")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The handler for FLOW_ACTION_PRIORITY ends by returning whatever the
lower-level function that it calls returns. If there are more actions lined
up after this action, those are never offloaded. Fix by only bailing out
when the called function returns an error.

Fixes: 463957e3 ("mlxsw: spectrum_flower: Offload FLOW_ACTION_PRIORITY")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There has been a number of reports that using SG/TSO on different chip
versions results in tx timeouts. However for a lot of people SG/TSO
works fine. Therefore disable both features by default, but allow users
to enable them. Use at own risk!

Fixes: 93681cd7 ("r8169: enable HW csum and TSO")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were registering our slave MDIO bus with OF and doing so with
assigning the newly created slave_mii_bus of_node to the master MDIO bus
controller node. This is a bad thing to do for a number of reasons:

- we are completely lying about the slave MII bus is arranged and yet we
  still want to control which MDIO devices it probes. It was attempted
  before to play tricks with the bus_mask to perform that:
  https://www.spinics.net/lists/netdev/msg429420.html but the approach
  was rightfully rejected

- the device_node reference counting is messed up and we are effectively
  doing a double probe on the devices we already probed using the
  master, this messes up all resources reference counts (such as clocks)

The proper fix for this as indicated by David in his reply to the
thread above is to use a platform data style registration so as to
control exactly which devices we probe:
https://www.spinics.net/lists/netdev/msg430083.html

By using mdiobus_register(), our slave_mii_bus->phy_mask value is used
as intended, and all the PHY addresses that must be redirected towards
our slave MDIO bus is happening while other addresses get redirected
towards the master MDIO bus.

Fixes: 461cd1b0 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fix the loop iteration by not walking over the last
iteration. The cmpri compressing value exempt the last segment. As the
code shows the last iteration will be overwritten by cmpre value
handling which is for the last segment.

I think this doesn't end in any bufferoverflows because we work on worst
case temporary buffer sizes but it ends in not best compression settings
in some cases.

Fixes: 8610c7c6 ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an XDP program is installed, tun_build_skb() grabs a reference to
the current page fragment page if the program returns XDP_REDIRECT or
XDP_TX. However, since tun_xdp_act() passes through negative return
values from the XDP program, it is possible to trigger the error path by
mistake and accidentally drop a reference to the fragments page without
taking one, leading to a spurious free. This is believed to be the cause
of some KASAN use-after-free reports from syzbot [1], although without a
reproducer it is not possible to confirm whether this patch fixes the
problem.

Ensure that we only drop a reference to the fragments page if the XDP
transmit or redirect operations actually fail.

[1] https://syzkaller.appspot.com/bug?id=e76a6af1be4acd727ff6bbca669833f98cbf5d95

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
CC: Eric Dumazet <edumazet@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Fixes: 8ae1aff0 ("tuntap: split out XDP logic")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 2nd gmac of mediatek soc ethernet may not be connected to a PHY
and a phy-handle isn't always available.
Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always
connected to switch port 5 and setup mt7530 according to phy address
of 2nd gmac node, causing null pointer dereferencing when phy-handle
isn't defined in dts.
This commit fix this setup code by checking return value of
of_parse_phandle before using it.

Fixes: 38f790a8 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some of the mptcp logs didn't print out the format string:

[  185.651493] DSS
[  185.651494] data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[  185.651494] data_ack=13792750332298763796
[  185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=0 skb=0000000063dc595d
[  185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 status=0
[  185.651495] MPTCP: msk ack_seq=9bbc894565aa2f9a subflow ack_seq=9bbc894565aa2f9a
[  185.651496] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=1 skb=0000000012e809e1

So this patch added these missing pr_fmt defines. Then we can get the same
format string "MPTCP" in all mptcp logs like this:

[  142.795829] MPTCP: DSS
[  142.795829] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[  142.795829] MPTCP: data_ack=8089704603109242421
[  142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=0 skb=00000000d5f230df
[  142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 status=0
[  142.795831] MPTCP: msk ack_seq=66790290f1199d9b subflow ack_seq=66790290f1199d9b
[  142.795831] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=1 skb=00000000de5aca2e
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the power-down bit is cleared, the chip internally triggers a
global reset. According to the KSZ9031 documentation, we have to wait at
least 1ms for the reset to finish.

If the chip is accessed during reset, read will return 0xffff, while
write will be ignored. Depending on the system performance and MDIO bus
speed, we may or may not run in to this issue.

This bug was discovered on an iMX6QP system with KSZ9031 PHY and
attached PHY interrupt line. If IRQ was used, the link status update was
lost. In polling mode, the link status update was always correct.

The investigation showed, that during a read-modify-write access, the
read returned 0xffff (while the chip was still in reset) and
corresponding write hit the chip _after_ reset and triggered (due to the
0xffff) another reset in an undocumented bit (register 0x1f, bit 1),
resulting in the next write being lost due to the new reset cycle.

This patch fixes the issue by adding a 1...2 ms sleep after the
genphy_resume().

Fixes: 836384d2 ("net: phy: micrel: Add specific suspend")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The initial refcnt of struct tcindex_data should be 1,
it is clear that I forgot to set it to 1 in tcindex_init().
This leads to a dec-after-zero warning.

Reported-by: syzbot+8325e509a1bf83ec741d@syzkaller.appspotmail.com
Fixes: 304e0242 ("net_sched: add a temporary refcnt for struct tcindex_data")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 9463c445 ("net: stmmac: dwmac1000: Clear unused address
entries") cleared the unused mac address entries, but introduced an
out-of bounds mac address register programming bug -- After setting
the secondary unicast mac addresses, the "reg" value has reached
netdev_uc_count() + 1, thus we should only clear address entries
if (addr < perfect_addr_number)

Fixes: 9463c445 ("net: stmmac: dwmac1000: Clear unused address entries")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shifting the integer value 1 is evaluated using 32-bit
arithmetic and then used in an expression that expects a 64-bit
value, so there is potentially an integer overflow. Fix this
by using the BIT_ULL macro to perform the shift and avoid the
overflow.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 13f2e64b ("mlxsw: spectrum_trap: Add devlink-trap policer support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove pegasus' own workqueue and replace it with system_long_wq.
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we limited the retrans_time to be greater than HZ/2. i.e.
setting retrans_time less than 500ms will not work. This makes the user
unable to achieve a more accurate control for bonding arp fast failover.

Update the sanity check to HZ/100, which is 10ms, to let users have more
ability on the retrans_time control.

v3: sync the behavior with IPv6 and update all the timer handler
v2: use HZ instead of hard code number
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct sw_flow is protected by RCU, when traversing them,
use hlist_for_each_entry_rcu.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, SO_BINDTODEVICE requires CAP_NET_RAW. This change allows a
non-root user to bind a socket to an interface if it is not already
bound. This is useful to allow an application to bind itself to a
specific VRF for outgoing or incoming connections. Currently, an
application wanting to manage connections through several VRF need to
be privileged.

Previously, IP_UNICAST_IF and IPV6_UNICAST_IF were added for
Wine (76e21053 and c4062dfc) specifically for use by
non-root processes. However, they are restricted to sendmsg() and not
usable with TCP. Allowing SO_BINDTODEVICE would allow TCP clients to
get the same privilege. As for TCP servers, outside the VRF use case,
SO_BINDTODEVICE would only further restrict connections a server could
accept.

When an application is restricted to a VRF (with `ip vrf exec`), the
socket is bound to an interface at creation and therefore, a
non-privileged call to SO_BINDTODEVICE to escape the VRF fails.

When an application bound a socket to SO_BINDTODEVICE and transmit it
to a non-privileged process through a Unix socket, a tentative to
change the bound device also fails.

Before:

    >>> import socket
    >>> s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    >>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
    PermissionError: [Errno 1] Operation not permitted

After:

    >>> import socket
    >>> s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    >>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
    >>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
    PermissionError: [Errno 1] Operation not permitted
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 907a0768, forgot that we need to clear old values of
XGMAC_VLAN_TAG register when we switch from VLAN perfect matching to
HASH matching.

Fix it.

Fixes: 907a0768 ("net: stmmac: xgmac: fix incorrect XGMAC_VLAN_TAG register writting")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CAVIUM_PTP is m and THUNDER_NIC_VF is y, build fails:

drivers/net/ethernet/cavium/thunder/nicvf_main.o: In function 'nicvf_remove':
nicvf_main.c:(.text+0x1f0): undefined reference to 'cavium_ptp_put'
drivers/net/ethernet/cavium/thunder/nicvf_main.o: In function `nicvf_probe':
nicvf_main.c:(.text+0x557c): undefined reference to 'cavium_ptp_get'

THUNDER_NIC_VF imply CAVIUM_PTP, which allow the config now,
Use IS_REACHABLE() to avoid the vmlinux link error for this case.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: def2fbff ("kconfig: allow symbols implied by y to become m")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
mptcp: various bugfixes and improvements

This series contains the following mptcp bug fixes:

1. Fix crash on tcp fallback when userspace doesn't provide a 'struct
   sockaddr' to accept().
2. Close mptcp socket only when all subflows have closed, not just the first.
3. avoid stream data corruption when we'd receive identical mapping at the
    exact same time on multiple subflows.
4. Fix "fn parameter not described" kerneldoc warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Obtained with:

  $ make W=1 net/mptcp/token.o
  net/mptcp/token.c:53: warning: Function parameter or member 'req' not described in 'mptcp_token_new_request'
  net/mptcp/token.c:98: warning: Function parameter or member 'sk' not described in 'mptcp_token_new_connect'
  net/mptcp/token.c:133: warning: Function parameter or member 'conn' not described in 'mptcp_token_new_accept'
  net/mptcp/token.c:178: warning: Function parameter or member 'token' not described in 'mptcp_token_destroy_request'
  net/mptcp/token.c:191: warning: Function parameter or member 'token' not described in 'mptcp_token_destroy'

Fixes: 79c0949e (mptcp: Add key generation and token tree)
Fixes: 58b09919 (mptcp: create msk early)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp_subflow_data_available() is commonly called via
ssk->sk_data_ready(), in this case the mptcp socket lock
cannot be acquired.

Therefore, while we can safely discard subflow data that
was already received up to msk->ack_seq, we cannot be sure
that 'subflow->data_avail' will still be valid at the time
userspace wants to read the data -- a previous read on a
different subflow might have carried this data already.

In that (unlikely) event, msk->ack_seq will have been updated
and will be ahead of the subflow dsn.

We can check for this condition and skip/resync to the expected
sequence number.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is needed at least until proper MPTCP-Level fin/reset
signalling gets added:

We wake parent when a subflow changes, but we should do this only
when all subflows have closed, not just one.

Schedule the mptcp worker and tell it to check eof state on all
subflows.

Only flag mptcp socket as closed and wake userspace processes blocking
in poll if all subflows have closed.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christoph Paasch reports following crash:

general protection fault [..]
CPU: 0 PID: 2874 Comm: syz-executor072 Not tainted 5.6.0-rc5 #62
RIP: 0010:__pv_queued_spin_lock_slowpath kernel/locking/qspinlock.c:471
[..]
 queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:50 [inline]
 do_raw_spin_lock include/linux/spinlock.h:181 [inline]
 spin_lock_bh include/linux/spinlock.h:343 [inline]
 __mptcp_flush_join_list+0x44/0xb0 net/mptcp/protocol.c:278
 mptcp_shutdown+0xb3/0x230 net/mptcp/protocol.c:1882
[..]

Problem is that mptcp_shutdown() socket isn't an mptcp socket,
its a plain tcp_sk.  Thus, trying to access mptcp_sk specific
members accesses garbage.

Root cause is that accept() returns a fallback (tcp) socket, not an mptcp
one.  There is code in getpeername to detect this and override the sockets
stream_ops.  But this will only run when accept() caller provided a
sockaddr struct.  "accept(fd, NULL, 0)" will therefore result in
mptcp stream ops, but with sock->sk pointing at a tcp_sk.

Update the existing fallback handling to detect this as well.

Moreover, mptcp_shutdown did not have fallback handling, and
mptcp_poll did it too late so add that there as well.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable err is being initialized with a value that is never
read and it is being updated later with a new value.  The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/crypto/chelsio/chcr_ktls.c: In function ‘chcr_short_record_handler’:
drivers/crypto/chelsio/chcr_ktls.c:1770:12: error: implicit declaration of function ‘kmap_atomic’;
 did you mean ‘in_atomic’? [-Werror=implicit-function-declaration]
    vaddr = kmap_atomic(skb_frag_page(f));
            ^~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: dc05f3df ("chcr: Handle first or middle part of record")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: f41071407c85 ("net: dsa: implement auto-normalization of MTU for bridge hardware datapath")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rec->llc is currently being assigned twice, once with the lower 8 bits
from packed_record[8] and then re-assigned afterwards with data from
packed_record[9].  This looks like a type, I believe the second assignment
should be using the |= operator rather than a direct assignment.

Addresses-Coverity: ("Unused value")
Fixes: b8f8a0b7 ("net: atlantic: MACSec ingress offload HW bindings")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Igor Russkikh <irusskikh@marell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows the changelink operation to succeed if the mux_id was
specified as an argument. Note that the mux_id must match the
existing mux_id of the rmnet device or should be an unused mux_id.

Fixes: 1dc49e9d ("net: rmnet: do not allow to change mux id if mux id is duplicated")
Reported-and-tested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The example for Marvell USB to MDIO Controller doesn't build:

Error: Documentation/devicetree/bindings/net/marvell,mvusb.example.dts:18.9-14 syntax error
FATAL ERROR: Unable to parse input tree

This is due to label refs being used which can't be resolved.

Fixes: 61e0150c ("dt-bindings: net: add marvell usb to mdio bindings")
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we don't have any filters available we can't rely upon the return
code of stmmac_add_hw_vlan_rx_fltr() / stmmac_del_hw_vlan_rx_fltr(). Add
a check for this.

Fixes: ed64639b ("net: stmmac: Add support for VLAN Rx filtering")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not right in grammar to spell "Its not". The right one is "It's
not".

And this line is also over 80 characters. So I broke it into two lines
as well in order to make that line not be more than 80 characters.
Signed-off-by: Hu Haowen <xianfengting221@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"its not" is wrong. The words should be "it's not".
Signed-off-by: Hu Haowen <xianfengting221@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct can_frame contains some padding which is not explicitly zeroed in
slc_bump. This uninitialized data will then be transmitted if the stack
initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL).

This commit just zeroes the whole struct including the padding.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Fixes: a1044e36 ("can: add slcan driver for serial/USB-serial CAN adapters")
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: security@kernel.org
Cc: wg@grandegger.com
Cc: mkl@pengutronix.de
Cc: davem@davemloft.net
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The masks in priv->clk_25m_reg and priv->clk_25m_mask are one-bits-set
for the values that comprise the fields, not zero-bits-set.

This patch fixes the clock frequency configuration for ATH8030 and
ATH8035 Atheros PHYs by removing the erroneous "~".

To reproduce this bug, configure the PHY  with the device tree binding
"qca,clk-out-frequency" and remove the machine specific PHY fixups.

Fixes: 2f664823 ("net: phy: at803x: add device tree binding")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>