- 21 Oct, 2019 40 commits
-
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 280ceaed ] After a reset packet sizes and device mtu can change and need to be reevaluated to calculate queue sizes. Malicious devices can set this to zero and we divide by it. Introduce sanity checking. Reported-and-tested-by: syzbot+6102c120be558c885f04@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Bjørn Mork authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 8d3d7c20 ] Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the drivers more robust against invalid and meaningless descriptors. The wMaxPacketSize of these endpoints are used for memory allocations and as divisors in many usbnet minidrivers. Avoiding zero is therefore critical. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Stephen Hemminger authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 5aafeb74 ] Running old skge driver on PowerPC causes checksum errors because hardware reported 1's complement checksum is in little-endian byte order. Reported-by:
Benoit <benoit.sansoni@gmail.com> Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit b41d936b ] syzbot managed to crash the kernel in tabledist() loading an empty distribution table. t = dist->table[rnd % dist->size]; Simply return an error when such load is attempted. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Li RongQing authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit ea8564c8 ] userspace openvswitch patch "(dpif-linux: Implement the API functions to allow multiple handler threads read upcall)" changes its type from U32 to UNSPEC, but leave the kernel unchanged and after kernel 6e237d09 "(netlink: Relax attr validation for fixed length types)", this bug is exposed by the below warning [ 57.215841] netlink: 'ovs-vswitchd': attribute type 5 has an invalid length. Fixes: 5cd667b0 ("openvswitch: Allow each vport to have an array of 'port_id's") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Peter Mamonov authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit e47488b2 ] According to the DP83865 datasheet "the 10 Mbps HDX loopback can be disabled in the expanded memory register 0x1C0.1". The driver erroneously used bit 0 instead of bit 1. Fixes: 4621bf12 ("phy: Add file missed in previous commit.") Signed-off-by:
Peter Mamonov <pmamonov@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Bjørn Mork authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 3fe4b335 ] Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the driver more robust against invalid and meaningless descriptors. The wMaxPacketSize of the out pipe is used as divisor. So this change fixes a divide-by-zero bug. Reported-by: syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com Signed-off-by:
-
Uwe Kleine-König authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 108639aac35eb57f1d0e8333f5fc8c7ff68df938 ] struct archdr is only big enough to hold the header of various types of arcnet packets. So to provide enough space to hold the data read from hardware provide a buffer large enough to hold a packet with maximal size. The problem was noticed by the stack protector which makes the kernel oops. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
Jian-Hong Pan authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 6d0762b1 ] The ASUS X412FA laptop contains a Realtek RTL8822CE device with an associated BT chip using a USB ID of 04ca:4005. This ID is added to the driver. The /sys/kernel/debug/usb/devices portion for this device is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4005 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Chris Wilson authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 3b295cb1 ] We need to mark the output polling as disabled to prevent concurrent irqs from queuing new work as shutdown the probe -- causing that work to execute after we have freed the structs: <4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) <4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915] <4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G U 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50 <4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48 <4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286 <4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000 <4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c <4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600 <4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0 <4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0 <4> [341.846613] FS: 00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000 <4> [341.846620] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0 <4> [341.846632] Call Trace: <4> [341.846639] drm_fb_helper_fini.part.17+0xb3/0x100 <4> [341.846682] intel_fbdev_fini+0x20/0x80 [i915] <4> [341.846722] intel_modeset_cleanup+0x9a/0x140 [i915] <4> [341.846750] i915_driver_unload+0xa3/0x100 [i915] <4> [341.846778] i915_pci_remove+0x19/0x30 [i915] <4> [341.846784] pci_device_remove+0x36/0xb0 <4> [341.846790] device_release_driver_internal+0xd3/0x1b0 <4> [341.846795] driver_detach+0x3f/0x80 <4> [341.846800] bus_remove_driver+0x53/0xd0 <4> [341.846805] pci_unregister_driver+0x25/0xa0 <4> [341.846843] i915_exit+0x16/0x1c [i915] <4> [341.846849] __se_sys_delete_module+0x162/0x210 <4> [341.846855] ? trace_hardirqs_off_thunk+0x1a/0x1c <4> [341.846859] ? do_syscall_64+0xd/0x1c0 <4> [341.846864] do_syscall_64+0x55/0x1c0 <4> [341.846869] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [341.846875] RIP: 0033:0x7f62b51871b7 <4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 <4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 <4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7 <4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948 <4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160 <4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000 <4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000 <4> [341.846936] irq event stamp: 3547847 <4> [341.846940] hardirqs last enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60 <4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50 <4> [341.846957] softirqs last enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9 <4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0 <4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846980] ---[ end trace ba94ca8952ba970e ]--- <7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes : <7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G U W 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.890655] Workqueue: events output_poll_execute <4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0 <4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8 <4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202 <4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000 <4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff <4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 <4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8 <4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007 <4> [341.890730] FS: 0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000 <4> [341.890739] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0 <4> [341.890752] Call Trace: <4> [341.890760] drm_fb_helper_hotplug_event.part.24+0x89/0xb0 <4> [341.890768] drm_kms_helper_hotplug_event+0x21/0x30 <4> [341.890774] output_poll_execute+0x9d/0x1a0 <4> [341.890782] process_one_work+0x245/0x610 <4> [341.890790] worker_thread+0x37/0x380 <4> [341.890796] ? process_one_work+0x610/0x610 <4> [341.890802] kthread+0x119/0x130 <4> [341.890808] ? kthread_park+0x80/0x80 <4> [341.890815] ret_from_fork+0x3a/0x50 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603135910.15979-2-chris@chris-wilson.co.ukSigned-off-by:
-
Chao Yu authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit c854f4d6 ] As Jungyeon Reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203233 - Reproduces gcc poc_13.c ./run.sh f2fs - Kernel messages F2FS-fs (sdb): Bitmap was wrongly set, blk:4608 kernel BUG at fs/f2fs/segment.c:2133! RIP: 0010:update_sit_entry+0x35d/0x3e0 Call Trace: f2fs_allocate_data_block+0x16c/0x5a0 do_write_page+0x57/0x100 f2fs_do_write_node_page+0x33/0xa0 __write_node_page+0x270/0x4e0 f2fs_sync_node_pages+0x5df/0x670 f2fs_write_checkpoint+0x364/0x13a0 f2fs_sync_fs+0xa3/0x130 f2fs_do_sync_file+0x1a6/0x810 do_fsync+0x33/0x60 __x64_sys_fsync+0xb/0x10 do_syscall_64+0x43/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The testcase fails because that, in fuzzed image, current segment was allocated with LFS type, its .next_blkoff should point to an unused block address, but actually, its bitmap shows it's not. So during allocation, f2fs crash when setting bitmap. Introducing sanity_check_curseg() to check such inconsistence of current in-used segment. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit a37d0862 ] As Pavel Machek reported: "We normally use -EUCLEAN to signal filesystem corruption. Plus, it is good idea to report it to the syslog and mark filesystem as "needing fsck" if filesystem can do that." Still we need improve the original patch with: - use unlikely keyword - add message print - return EUCLEAN However, after rethink this patch, I don't think we should add such condition check here as below reasons: - We have already checked the field in f2fs_sanity_check_ckpt(), - If there is fs corrupt or security vulnerability, there is nothing to guarantee the field is integrated after the check, unless we do the check before each of its use, however no filesystem does that. - We only have similar check for bitmap, which was added due to there is bitmap corruption happened on f2fs' runtime in product. - There are so many key fields in SB/CP/NAT did have such check after f2fs_sanity_check_{sb,cp,..}. So I propose to revert this unneeded check. This reverts commit 56f3ce67. Signed-off-by:
-
Surbhi Palande authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 1166c1f2 ] As a part of the sanity checking while mounting, distinct segment number assignment to data and node segments is verified. Fixing a small bug in this verification between node and data segments. We need to check all the data segments with all the node segments. Fixes: 042be0f8 ("f2fs: fix to do sanity check with current segment number") Signed-off-by:
Surbhi Palande <csurbhi@gmail.com> Reviewed-by:
-
Marc Zyngier authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit c9c96e30 ] When allocating a range of LPIs for a Multi-MSI capable device, this allocation extended to the closest power of 2. But on the release path, the interrupts are released one by one. This results in not releasing the "extra" range, leaking the its_device. Trying to reprobe the device will then fail. Fix it by releasing the LPIs the same way we allocate them. Fixes: 8208d170 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size") Reported-by:
Jiaxing Luo <luojiaxing@huawei.com> Tested-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/f5e948aa-e32f-3f74-ae30-31fee06c2a74@huawei.comSigned-off-by:
-
Waiman Long authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 513e1073 ] Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning. Fix that by add a check for debug_locks at the beginning of __lock_downgrade(). Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzbot+53383ae265fb161ef488@syzkaller.appspotmail.com Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Yu Wang authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 79c92ca4 ] When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step #2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: stable@vger.kernel.org Signed-off-by:
Yu Wang <yyuwang@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Arkadiusz Miskiewicz authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 68506e9a ] When disassociation happens only numeric reason is printed in ieee80211_rx_mgmt_disassoc(). Add text variant, too. Signed-off-by:
Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by:
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1848589 This reverts commit ac12d565 in favor of its upstream stable version. Signed-off-by:
-
Shih-Yuan Lee (FourDollars) authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 7b485d17 upstream. The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A codec like another HP machine. Signed-off-by:
Shih-Yuan Lee (FourDollars) <fourdollars@debian.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190920134052.GA8035@localhostSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 2757970f upstream. The node obtained from of_find_node_by_path() has to be unreferenced after the use, but we forgot it for the root node. Fixes: f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support") Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mao Wenan authored
BugLink: https://bugs.launchpad.net/bugs/1848589 After the commit c4e97b06cfdc ("net: rds: force to destroy connection if t_sock is NULL in rds_tcp_kill_sock()."), it introduced null-ptr-deref in rds_tcp_kill_sock as below: BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 8 by task kworker/u16:10/910 CPU: 3 PID: 910 Comm: kworker/u16:10 Not tainted 4.4.178+ #3 Hardware name: linux,dummy-virt (DT) Workqueue: netns cleanup_net Call trace: [<ffffff90080abb50>] dump_backtrace+0x0/0x618 [<ffffff90080ac1a0>] show_stack+0x38/0x60 [<ffffff9008c42b78>] dump_stack+0x1a8/0x230 [<ffffff90085d469c>] kasan_report_error+0xc8c/0xfc0 [<ffffff90085d54a4>] kasan_report+0x94/0xd8 [<ffffff90085d1b28>] __asan_load8+0x88/0x150 [<ffffff9009c9cc2c>] rds_tcp_dev_event+0x734/0xb48 [<ffffff90081eacb0>] raw_notifier_call_chain+0x150/0x1e8 [<ffffff900973fec0>] call_netdevice_notifiers_info+0x90/0x110 [<ffffff9009764874>] netdev_run_todo+0x2f4/0xb08 [<ffffff9009796d34>] rtnl_unlock+0x2c/0x48 [<ffffff9009756484>] default_device_exit_batch+0x444/0x528 [<ffffff9009720498>] ops_exit_list+0x1c0/0x240 [<ffffff9009724a80>] cleanup_net+0x738/0xbf8 [<ffffff90081ca6cc>] process_one_work+0x96c/0x13e0 [<ffffff90081cf370>] worker_thread+0x7e0/0x1910 [<ffffff90081e7174>] kthread+0x304/0x390 [<ffffff9008094280>] ret_from_fork+0x10/0x50 If the first loop add the tc->t_sock = NULL to the tmp_list, 1). list_for_each_entry_safe(tc, _tc, &rds_tcp_conn_list, t_tcp_node) then the second loop is to find connections to destroy, tc->t_sock might equal NULL, and tc->t_sock->sk happens null-ptr-deref. 2). list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node) Fixes: c4e97b06cfdc ("net: rds: force to destroy connection if t_sock is NULL in rds_tcp_kill_sock().") Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 5fc194ea upstream. Add missing break statement in order to prevent the code from falling through to case CRYPTO_ALG_TYPE_AHASH. Fixes: aeb4c132 ("crypto: talitos - Convert to new AEAD interface") Cc: stable@vger.kernel.org Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tokunori Ikegami authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 37c673ad upstream. As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bf ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by:
Fabio Bettoni <fbettoni@gmail.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 416dacb8 upstream. The syzbot fuzzer has reported a pair of problems in the hidraw_ioctl() function: slab-out-of-bounds read and use-after-free read. An example of the first: BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525 Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833 CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 strlen+0x79/0x90 lib/string.c:525 strlen include/linux/string.h:281 [inline] hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696 ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4 R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff The two problems have the same cause: hidraw_ioctl() fails to test whether the device has been removed. This patch adds the missing test. Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 5f924277 upstream. The syzbot fuzzer found a general protection fault in the HID subsystem: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069 Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00 RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000 RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25 R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004 R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048 FS: 00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline] usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707 usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234 hid_hw_power include/linux/hid.h:1038 [inline] hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282 chrdev_open+0x219/0x5c0 fs/char_dev.c:413 do_dentry_open+0x497/0x1040 fs/open.c:778 do_last fs/namei.c:3416 [inline] path_openat+0x1430/0x3ff0 fs/namei.c:3533 do_filp_open+0x1a1/0x280 fs/namei.c:3563 do_sys_open+0x3c0/0x580 fs/open.c:1070 do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe It turns out the fault was caused by a bug in the HID Logitech driver, which violates the requirement that every pathway calling hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug by making sure the requirement is met. Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com Signed-off-by:
-
Benjamin Tissoires authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 061232f0 upstream. Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove buffers allocated on the stack. [jkosina@suse.cz: fix up second usage of hid_hw_raw_request(), spotted by 0day build bot] Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1848589 commit 98375b86 upstream. The syzbot fuzzer provoked a general protection fault in the hid-prodikeys driver: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline] RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline] RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline] RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836 Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc 48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b The problem is caused by the fact that pcmidi_get_output_report() will return an error if the HID device doesn't provide the right sort of output report, but pcmidi_set_operational() doesn't bother to check the return code and assumes the function call always succeeds. This patch adds the missing check and aborts the probe operation if necessary. Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com Signed-off-by:
-
Marcel Holtmann authored
BugLink: https://bugs.launchpad.net/bugs/1848589 [ Upstream commit 68d19d7d ] This reverts commit c49a8682. There are devices which require low connection intervals for usable operation including keyboards and mice. Forcing a static connection interval for these types of devices has an impact in latency and causes a regression. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Shrirang Bagul authored
BugLink: https://bugs.launchpad.net/bugs/1847969 Due to a race condition, some times the headers directory already exists when running the install-arch-headers rule. Make sure we do not fail in that case. Signed-off-by:
Alfonso Sánchez-Beato <alfonso.sanchez-beato@canonical.com> Signed-off-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Acked-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Shrirang Bagul authored
BugLink: https://bugs.launchpad.net/bugs/1847969 Add a fit_signed option and a script so we can build FIT images that will be eventually signed. Signed-off-by:
-
Shile Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1840043 Read /sys/fs/bcache/<uuid>/cacheN/priority_stats can take very long time with huge cache after long run. Signed-off-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Tested-by:
Heitor Alves de Siqueira <halves@canonical.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> (backported from commit d55a4ae9) Signed-off-by:
-
Heitor Alves de Siqueira authored
BugLink: https://bugs.launchpad.net/bugs/1848236Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
-
Tyler Hicks authored
BugLink: https://launchpad.net/bugs/1847189 The Ubuntu Xenial backport of upstream commit 19b558db ("posix-timers: Protect posix clock array access against speculation") incorrectly dropped the NULL check on the .clock_getres function pointer. Readd the NULL check while still protecting against side-channel speculation attacks when indexing into the posix_clocks array to perform that NULL check. The NULL check protects against a denial of service (system crash) or possible arbitrary code execution that can be triggered by clock_gettime(10, 0), as pointed out by Vitaly Nikolenko. Fixes: eb4a3a43 ("posix-timers: Protect posix clock array access against speculation") Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Andrea Righi <andrea.righi@canonical.com> Signed-off-by:
-
Andy Whitcroft authored
BugLink: https://bugs.launchpad.net/bugs/1847118 When looking for a bit by number we make use of the cached result from the preceding lookup to speed up operation. Firstly we check if the requested pfn is within the cached zone and if not lookup the new zone. We then check if the offset for that pfn falls within the existing cached node. This happens regardless of whether the node is within the zone we are now scanning. With certain memory layouts it is possible for this to false trigger creating a temporary alias for the pfn to a different bit. This leads the hibernation code to free memory which it was never allocated with the expected fallout. Ensure the zone we are scanning matches the cached zone before considering the cached node. Deep thanks go to Andrea for many, many, many hours of hacking and testing that went into cornering this bug. Reported-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> (backported from commit 39800d8fc4083cfe5c8f69333336bf03f9571070 linux-next) Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
-
Ori Nimron authored
When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
Ori Nimron <orinimron123@gmail.com> Signed-off-by:
-
Ori Nimron authored
When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
-
Ori Nimron authored
When creating a raw AF_APPLETALK socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
-
Ori Nimron authored
When creating a raw AF_IEEE802154 socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Ori Nimron authored
When creating a raw AF_AX25 socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
-
Hui Peng authored
The `ar_usb` field of `ath6kl_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath6kl_usb` object according to endpoint descriptors read from the device side, as shown below in `ath6kl_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath6kl_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath6kl_usb_alloc_urb_from_pipe` and `ath6kl_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref (CVE-2019-15098). Signed-off-by:Hui Peng <benquike@gmail.com> Reported-by:
Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by:
Kalle Valo <kvalo@codeaurora.org> CVE-2019-15098 (cherry picked from commit 39d170b3) Signed-off-by:
-
