Replace the open coded calculations of the actual physical address
of the KVM stub vector table with a single adr_l invocation.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Replace the open coded arithmetic with a simple adr_l/sub pair. This
removes some open coded arithmetic involving virtual addresses, avoids
literal pools on v7+, and slightly reduces the footprint of the code.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Replace the open coded PC relative offset calculations with adr_l and
ldr_l invocations. This removes some open coded PC relative arithmetic,
avoids literal pools on v7+, and slightly reduces the footprint of the
code. Note that ALT_SMP() expects a single instruction so move the macro
invocation after it.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Now that calling __do_fixup_smp_on_up() can be done without passing
the physical-to-virtual offset in r3, we can replace the open coded
PC relative offset calculations with a pair of adr_l invocations. This
removes some open coded arithmetic involving virtual addresses, avoids
literal pools on v7+, and slightly reduces the footprint of the code.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Currently, the .alt.smp.init section contains the virtual addresses
of the patch sites. Since patching may occur both before and after
switching into virtual mode, this requires some manual handling of
the address when applying the UP alternative.

Let's simplify this by using relative offsets in the table entries:
this allows us to simply add each entry's address to its contents,
regardless of whether we are running in virtual mode or not.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Replace the open coded PC relative offset calculations with adr_l
and ldr_l invocations. This removes some open coded arithmetic
involving virtual addresses, avoids literal pools on v7+, and slightly
reduces the footprint of the code.

Note that it also removes a stale comment about the contents of r6.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Replace the open coded PC relative offset calculations involving
__turn_mmu_on and __turn_mmu_on_end with a pair of adr_l invocations.
This removes some open coded arithmetic involving virtual addresses,
avoids literal pools on v7+, and slightly reduces the footprint of the
code.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Replace the open coded PC relative offset calculations with a pair of
adr_l invocations. This removes some open coded arithmetic involving
virtual addresses, avoids literal pools on v7+, and slightly reduces
the footprint of the code.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The ARM 'adrl' pseudo instruction is a bit problematic, as it does not
exist in Thumb mode, and it is not implemented by Clang either. Since
the Thumb variant has a slightly bigger range, it is sometimes necessary
to emit the 'adrl' variant in ARM mode where Thumb mode can use adr just
fine. However, that still leaves the Clang issue, which does not appear
to be supporting this any time soon.

So let's switch to the adr_l macro, which works for both ARM and Thumb,
and has unlimited range.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The ARM kernel's linear map starts at PAGE_OFFSET, which maps to a
physical address (PHYS_OFFSET) that is platform specific, and is
discovered at boot. Since we don't want to slow down translations
between physical and virtual addresses by keeping the offset in a
variable in memory, we implement this by patching the code performing
the translation, and putting the offset between PAGE_OFFSET and the
start of physical RAM directly into the instruction opcodes.

As we only patch up to 8 bits of offset, yielding 4 GiB >> 8 == 16 MiB
of granularity, we have to round up PHYS_OFFSET to the next multiple if
the start of physical RAM is not a multiple of 16 MiB. This wastes some
physical RAM, since the memory that was skipped will now live below
PAGE_OFFSET, making it inaccessible to the kernel.

We can improve this by changing the patchable sequences and the patching
logic to carry more bits of offset: 11 bits gives us 4 GiB >> 11 == 2 MiB
of granularity, and so we will never waste more than that amount by
rounding up the physical start of DRAM to the next multiple of 2 MiB.
(Note that 2 MiB granularity guarantees that the linear mapping can be
created efficiently, whereas less than 2 MiB may result in the linear
mapping needing another level of page tables)

This helps Zhen Lei's scenario, where the start of DRAM is known to be
occupied. It also helps EFI boot, which relies on the firmware's page
allocator to allocate space for the decompressed kernel as low as
possible. And if the KASLR patches ever land for 32-bit, it will give
us 3 more bits of randomization of the placement of the kernel inside
the linear region.

For the ARM code path, it simply comes down to using two add/sub
instructions instead of one for the carryless version, and patching
each of them with the correct immediate depending on the rotation
field. For the LPAE calculation, which has to deal with a carry, it
patches the MOVW instruction with up to 12 bits of offset (but we only
need 11 bits anyway)

For the Thumb2 code path, patching more than 11 bits of displacement
would be somewhat cumbersome, but the 11 bits we need fit nicely into
the second word of the u16[2] opcode, so we simply update the immediate
assignment and the left shift to create an addend of the right magnitude.
Suggested-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

In preparation for reducing the phys-to-virt minimum relative alignment
from 16 MiB to 2 MiB, switch to patchable sequences involving MOVW
instructions that can more easily be manipulated to carry a 12-bit
immediate. Note that the non-LPAE ARM sequence is not updated: MOVW
may not be supported on non-LPAE platforms, and the sequence itself
can be updated more easily to apply the 12 bits of displacement.

For Thumb2, which has many more versions of opcodes, switch to a sequence
that can be patched by the same patching code for both versions. Note
that the Thumb2 opcodes for MOVW and MVN are unambiguous, and have no
rotation bits in their immediate fields, so there is no need to use
placeholder constants in the asm blocks.

While at it, drop the 'volatile' qualifiers from the asm blocks: the
code does not have any side effects that are invisible to the compiler,
so it is free to omit these sequences if the outputs are not used.
Suggested-by: Russell King <linux@armlinux.org.uk>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Declutter the code in __fixup_pv_table() by using the new adr_l/str_l
macros to take PC relative references to external symbols, and by
using the value of PHYS_OFFSET passed in r8 to calculate the p2v
offset.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Free up a register in the p2v patching code by switching to relative
references, which don't require keeping the phys-to-virt displacement
live in a register.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

We always pass the same value for 'type' so pull it into the __pv_stub
macro itself.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The big and little endian versions of the ARM p2v patching routine only
differ in the values of the constants, so factor those out into macros
so that we only have one version of the logic sequence to maintain.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The ARM and Thumb2 versions of the p2v patching loop have some overlap
at the end of the loop, so factor that out. As numeric labels are not
required to be unique, and may therefore be ambiguous, use named local
labels for the start and end of the loop instead.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Move the phys2virt patching code into a separate .S file before doing
some work on it.
Suggested-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

When using the new adr_l/ldr_l/str_l macros to refer to external symbols
from modules, the linker may emit place relative ELF relocations that
need to be fixed up by the module loader. So add support for these.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Like arm64, ARM supports position independent code sequences that
produce symbol references with a greater reach than the ordinary
adr/ldr instructions. Since on ARM, the adrl pseudo-instruction is
only supported in ARM mode (and not at all when using Clang), having
a adr_l macro like we do on arm64 is useful, and increases symmetry
as well.

Currently, we use open coded instruction sequences involving literals
and arithmetic operations. Instead, we can use movw/movt pairs on v7
CPUs, circumventing the D-cache entirely.

E.g., on v7+ CPUs, we can emit a PC-relative reference as follows:

       movw         <reg>, #:lower16:<sym> - (1f + 8)
       movt         <reg>, #:upper16:<sym> - (1f + 8)
  1:   add          <reg>, <reg>, pc

For older CPUs, we can emit the literal into a subsection, allowing it
to be emitted out of line while retaining the ability to perform
arithmetic on label offsets.

E.g., on pre-v7 CPUs, we can emit a PC-relative reference as follows:

       ldr          <reg>, 2f
  1:   add          <reg>, <reg>, pc
       .subsection  1
  2:   .long        <sym> - (1b + 8)
       .previous

This is allowed by the assembler because, unlike ordinary sections,
subsections are combined into a single section in the object file, and
so the label references are not true cross-section references that are
visible as relocations. (Subsections have been available in binutils
since 2004 at least, so they should not cause any issues with older
toolchains.)

So use the above to implement the macros mov_l, adr_l, ldr_l and str_l,
all of which will use movw/movt pairs on v7 and later CPUs, and use
PC-relative literals otherwise.
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

When running in BE mode on LPAE hardware with a PA-to-VA translation
that exceeds 4 GB, we patch bits 39:32 of the offset into the wrong
byte of the opcode. So fix that, by rotating the offset in r0 to the
right by 8 bits, which will put the 8-bit immediate in bits 31:24.

Note that this will also move bit #22 in its correct place when
applying the rotation to the constant #0x400000.

Fixes: d9a790df ("ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE")
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace".  So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 453431a5 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.

Since then a few more instances of kzfree() have slipped in.

Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.

If GIT_DIR is unset, keep using the current ".git" default.

Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Thomas Gleixner:
 "A time namespace fix and a matching selftest. The futex absolute
  timeouts which are based on CLOCK_MONOTONIC require time namespace
  corrected. This was missed in the original time namesapce support"

* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/timens: Add a test for futex()
  futex: Adjust absolute futex timeouts with per time namespace offset

Pull scheduler fixes from Thomas Gleixner:
 "Two scheduler fixes:

   - A trivial build fix for sched_feat() to compile correctly with
     CONFIG_JUMP_LABEL=n

   - Replace a zero lenght array with a flexible array"

* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/features: Fix !CONFIG_JUMP_LABEL case
  sched: Replace zero-length array with flexible-array

Pull perf fix from Thomas Gleixner:
 "A single fix to compute the field offset of the SNOOPX bit in the data
  source bitmask of perf events correctly"

* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: correct SNOOPX field offset

Pull locking fix from Thomas Gleixner:
 "Just a trivial fix for kernel-doc warnings"

* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/seqlocks: Fix kernel-doc warnings

Pull NTB fixes from Jon Mason.

* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
  NTB: Use struct_size() helper in devm_kzalloc()
  ntb: intel: Fix memleak in intel_ntb_pci_probe
  NTB: hw: amd: fix an issue about leak system resources

Pull i2c fix from Wolfram Sang:
 "Regression fix for rc1 and stable kernels as well"

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

Pull more cifs updates from Steve French:
 "Add support for stat of various special file types (WSL reparse points
  for char, block, fifo)"

* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  smb3: add some missing definitions from MS-FSCC
  smb3: remove two unused variables
  smb3: add support for stat of WSL reparse points for special file types

Pull more parisc updates from Helge Deller:

 - During this merge window O_NONBLOCK was changed to become 000200000,
   but we missed that the syscalls timerfd_create(), signalfd4(),
   eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
   bit-wise check of the flags parameter.

   To provide backward compatibility with existing userspace we
   introduce parisc specific wrappers for those syscalls which filter
   out the old O_NONBLOCK value and replaces it with the new one.

 - Prevent HIL bus driver to get stuck when keyboard or mouse isn't
   attached

 - Improve error return codes when setting rtc time

 - Minor documentation fix in pata_ns87415.c

* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  ata: pata_ns87415.c: Document support on parisc with superio chip
  parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
  hil/parisc: Disable HIL driver when it gets stuck
  parisc: Improve error return codes when setting rtc time

Pull more xen updates from Juergen Gross:

 - a series for the Xen pv block drivers adding module parameters for
   better control of resource usge

 - a cleanup series for the Xen event driver

* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Documentation: add xen.fifo_events kernel parameter description
  xen/events: unmask a fifo event channel only if it was masked
  xen/events: only register debug interrupt for 2-level events
  xen/events: make struct irq_info private to events_base.c
  xen: remove no longer used functions
  xen-blkfront: Apply changed parameter name to the document
  xen-blkfront: add a parameter for disabling of persistent grants
  xen-blkback: add a parameter for disabling of persistent grants

Pull SafeSetID updates from Micah Morton:
 "The changes are mostly contained to within the SafeSetID LSM, with the
  exception of a few 1-line changes to change some ns_capable() calls to
  ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
  is examined by SafeSetID code and nothing else in the kernel.

  The changes to SafeSetID internally allow for setting up GID
  transition security policies, as already existed for UIDs"

* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
  LSM: SafeSetID: Fix warnings reported by test bot
  LSM: SafeSetID: Add GID security policy handling
  LSM: Signal to SafeSetID when setting group IDs

Pull random32 updates from Willy Tarreau:
 "Make prandom_u32() less predictable.

  This is the cleanup of the latest series of prandom_u32
  experimentations consisting in using SipHash instead of Tausworthe to
  produce the randoms used by the network stack.

  The changes to the files were kept minimal, and the controversial
  commit that used to take noise from the fast_pool (f227e3ec) was
  reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
  fed from various sources of activities (networking, scheduling) to
  perturb the SipHash state using fast, non-trivially predictable data,
  instead of keeping it fully deterministic. The goal is essentially to
  make any occasional memory leakage or brute-force attempt useless.

  The resulting code was verified to be very slightly faster on x86_64
  than what is was with the controversial commit above, though this
  remains barely above measurement noise. It was also tested on i386 and
  arm, and build- tested only on arm64"

Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/

* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
  random32: add a selftest for the prandom32 code
  random32: add noise from network and scheduling activity
  random32: make prandom_u32() output unpredictable

Commit 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().

But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().

Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.

This fixes the Microsoft Surface Go 2 hanging at boot.

Fixes: 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627Reported-by: Rainer Finke <rainer@finke.cc>
Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph
     - rdma error handling fixes (Chao Leng)
     - fc error handling and reconnect fixes (James Smart)
     - fix the qid displace when tracing ioctl command (Keith Busch)
     - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
     - fix MTDT for passthru (Logan Gunthorpe)
     - blacklist Write Same on more devices (Kai-Heng Feng)
     - fix an uninitialized work struct (zhenwei pi)"

 - lightnvm out-of-bounds fix (Colin)

 - SG allocation leak fix (Doug)

 - rnbd fixes (Gioh, Guoqing, Jack)

 - zone error translation fixes (Keith)

 - kerneldoc markup fix (Mauro)

 - zram lockdep fix (Peter)

 - Kill unused io_context members (Yufen)

 - NUMA memory allocation cleanup (Xianting)

 - NBD config wakeup fix (Xiubo)

* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
  block: blk-mq: fix a kernel-doc markup
  nvme-fc: shorten reconnect delay if possible for FC
  nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
  nvme-fc: fix error loop in create_hw_io_queues
  nvme-fc: fix io timeout to abort I/O
  null_blk: use zone status for max active/open
  nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
  nvmet: cleanup nvmet_passthru_map_sg()
  nvmet: limit passthru MTDS by BIO_MAX_PAGES
  nvmet: fix uninitialized work for zero kato
  nvme-pci: disable Write Zeroes on Sandisk Skyhawk
  nvme: use queuedata for nvme_req_qid
  nvme-rdma: fix crash due to incorrect cqe
  nvme-rdma: fix crash when connect rejected
  block: remove unused members for io_context
  blk-mq: remove the calling of local_memory_node()
  zram: Fix __zram_bvec_{read,write}() locking order
  skd_main: remove unused including <linux/version.h>
  sgl_alloc_order: fix memory leak
  lightnvm: fix out-of-bounds write to array devices->info[]
  ...

Pull io_uring fixes from Jens Axboe:

 - fsize was missed in previous unification of work flags

 - Few fixes cleaning up the flags unification creds cases (Pavel)

 - Fix NUMA affinities for completely unplugged/replugged node for io-wq

 - Two fallout fixes from the set_fs changes. One local to io_uring, one
   for the splice entry point that io_uring uses.

 - Linked timeout fixes (Pavel)

 - Removal of ->flush() ->files work-around that we don't need anymore
   with referenced files (Pavel)

 - Various cleanups (Pavel)

* tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
  splice: change exported internal do_splice() helper to take kernel offset
  io_uring: make loop_rw_iter() use original user supplied pointers
  io_uring: remove req cancel in ->flush()
  io-wq: re-set NUMA node affinities if CPUs come online
  io_uring: don't reuse linked_timeout
  io_uring: unify fsize with def->work_flags
  io_uring: fix racy REQ_F_LINK_TIMEOUT clearing
  io_uring: do poll's hash_node init in common code
  io_uring: inline io_poll_task_handler()
  io_uring: remove extra ->file check in poll prep
  io_uring: make cached_cq_overflow non atomic_t
  io_uring: inline io_fail_links()
  io_uring: kill ref get/drop in personality init
  io_uring: flags-based creds init in queue

Pull libata fixes from Jens Axboe:
 "Two minor libata fixes:

   - Fix a DMA boundary mask regression for sata_rcar (Geert)

   - kerneldoc markup fix (Mauro)"

* tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
  ata: fix some kernel-doc markups
  ata: sata_rcar: Fix DMA boundary mask