- 16 Nov, 2012 3 commits
-
-
Paul E. McKenney authored
Merge branches 'urgent.2012.10.27a', 'doc.2012.11.16a', 'fixes.2012.11.13a', 'srcu.2012.10.27a', 'stall.2012.11.13a', 'tracing.2012.11.08a' and 'idle.2012.10.24a' into HEAD urgent.2012.10.27a: Fix for RCU user-mode transition (already in -tip). doc.2012.11.08a: Documentation updates, most notably codifying the memory-barrier guarantees inherent to grace periods. fixes.2012.11.13a: Miscellaneous fixes. srcu.2012.10.27a: Allow statically allocated and initialized srcu_struct structures (courtesy of Lai Jiangshan). stall.2012.11.13a: Add more diagnostic information to RCU CPU stall warnings, also decrease from 60 seconds to 21 seconds. hotplug.2012.11.08a: Minor updates to CPU hotplug handling. tracing.2012.11.08a: Improved debugfs tracing, courtesy of Michael Wang. idle.2012.10.24a: Updates to RCU idle/adaptive-idle handling, including a boot parameter that maps normal grace periods to expedited. Resolved conflict in kernel/rcutree.c due to side-by-side change.
-
Paul E. McKenney authored
This commit adds the documentation of the rcuexp debugfs trace file that records statistics for expedited grace periods. Signed-off-by:
Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
Paul E. McKenney authored
This commit updates the tracing documentation to reflect the new format that has per-RCU-flavor directories. Signed-off-by:
-
- 13 Nov, 2012 6 commits
-
-
Paul E. McKenney authored
The RCU CPU stall warning timeout has defaulted to 60 seconds for some years, with almost no false positives. This commit therefore reduces the default to 21 seconds, slightly shorter than the new soft-lockup timeout. Signed-off-by: -
Paul E. McKenney authored
The rcu_is_cpu_rrupt_from_idle() needs to allow for one interrupt level from the idle loop, but TINY_RCU checks for a call from the idle loop itself. This commit fixes this issue. Reported-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Paul E. McKenney authored
This commit explicitly states the memory-ordering properties of the RCU grace-period primitives. Although these properties were in some sense implied by the fundmental property of RCU ("a grace period must wait for all pre-existing RCU read-side critical sections to complete"), stating it explicitly will be a great labor-saving device. Reported-by:Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Paul E. McKenney authored
Several new rcutorture module parameters have been added, but are not printed to the console at the beginning and end of tests, which makes it difficult to reproduce a prior test. This commit therefore adds these new module parameters to the list printed at the beginning and the end of the tests. Signed-off-by:
-
Paul E. McKenney authored
The list_for_each_continue_rcu() macro is no longer used, so this commit removes it. The list_for_each_entry_continue_rcu() macro should be used instead. Signed-off-by: -
Eric Dumazet authored
Commit 29c00b4a (rcu: Add event-tracing for RCU callback invocation) added a regression in rcu_do_batch() Under stress, RCU is supposed to allow to process all items in queue, instead of a batch of 10 items (blimit), but an integer overflow makes the effective limit being 1. So, unless there is frequent idle periods (during which RCU ignores batch limits), RCU can be forced into a state where it cannot keep up with the callback-generation rate, eventually resulting in OOM. This commit therefore converts a few variables in rcu_do_batch() from int to long to fix this problem, along with the module parameters controlling the batch limits. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 08 Nov, 2012 20 commits
-
-
Paul E. McKenney authored
This commit adds a per-RCU-flavor "rcuexp" file that dumps out statistics for synchonize_sched_expedited(). Signed-off-by:
-
Michael Wang authored
This commit removes the old debugfs interfaces, so that the new directory-per-RCU-flavor versions remain. Because the RCU flavor is given by the directory name, there is no need to print it out, so remove the name from the printout. Signed-off-by:
Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by:
-
Michael Wang authored
This patch add new 'rcuhier' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcuhier' to get the selected rsp info. Signed-off-by:
-
Michael Wang authored
This patch add new 'rcugp' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcugp' to get the selected rsp info. Signed-off-by:
-
Michael Wang authored
This patch add new 'rcuboost' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcuboost' to get the selected rsp info. Signed-off-by:
-
Michael Wang authored
This patch add new 'rcubarrier' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcubarrier' to get the selected rsp info. Signed-off-by:
-
Paul E. McKenney authored
The rcu_state structure's ->completed field is unsigned long, so this commit adjusts show_one_rcugp()'s printf() format to suit. Also add the required ACCESS_ONCE() directives while we are in this function. Signed-off-by: -
Michael Wang authored
This patch removes the interface "rcudata.csv" since it is apparently not used. Signed-off-by:
-
Michael Wang authored
This patch removed the old RCU debugfs interface and replaced it with the new one. Signed-off-by:
-
Michael Wang authored
This patch implements the new 'rcu_pending' interface under each rsp directory, by using the 'CPU units sequence reading', thus avoiding loss of tracing data. Signed-off-by:
-
Michael Wang authored
This patch implements the new 'rcudata.csv' interface under each rsp directory, by using the 'CPU units sequence reading', thus avoiding loss of tracing data. Signed-off-by:
-
Michael Wang authored
This patch implements the new 'rcudata' interface under each rsp directory, by using the 'CPU units sequence reading', thus avoiding loss of tracing data. Signed-off-by:
-
Michael Wang authored
This patch add the fundamental facility used by the following patches, so we can implement the 'CPU units sequence reading' later. This helps us avoid losing data when there are too many CPUs and too small of a buffer, since this new approach allows userspace to read out the data one CPU at a time. Thus, if the buffer is not large enough, userspace will get whatever CPUs fit, and can then issue another read for the remainder of the data. Signed-off-by:
-
Michael Wang authored
This patch will create subdirectory according to each flavor of rcu, the new structure will be: /debugfs/rcu/ -> rsp_0 -> rsp_1 -> ... So we can go to '/debugfs/rcu/rsp_0' and get the cpu info of rsp_0 there. The flavors of RCU are currently rcu_bh, rcu_preempt, and rcu_sched. Signed-off-by:
-
Paul E. McKenney authored
This commit adds the counters to rcu_state and updates them in synchronize_rcu_expedited() to provide the data needed for debugfs tracing. Signed-off-by:
-
Paul E. McKenney authored
Tracing (debugfs) of expedited RCU primitives is required, which in turn requires that the relevant data be located where the tracing code can find it, not in its current static global variables in kernel/rcutree.c. This commit therefore moves sync_sched_expedited_started and sync_sched_expedited_done to the rcu_state structure, as fields ->expedited_start and ->expedited_done, respectively. Signed-off-by:
-
Paul E. McKenney authored
There is a counter scheme similar to ticket locking that synchronize_sched_expedited() uses to service multiple concurrent callers with the same expedited grace period. Upon entry, a sync_sched_expedited_started variable is atomically incremented, and upon completion of a expedited grace period a separate sync_sched_expedited_done variable is atomically incremented. However, if a synchronize_sched_expedited() is delayed while in try_stop_cpus(), concurrent invocations will increment the sync_sched_expedited_started counter, which will eventually overflow. If the original synchronize_sched_expedited() resumes execution just as the counter overflows, a concurrent invocation could incorrectly conclude that an expedited grace period elapsed in zero time, which would be bad. One could rely on counter size to prevent this from happening in practice, but the goal is to formally validate this code, so it needs to be fixed anyway. This commit therefore checks the gap between the two counters before incrementing sync_sched_expedited_started, and if the gap is too large, does a normal grace period instead. Overflow is thus only possible if there are more than about 3.5 billion threads on 32-bit systems, which can be excluded until such time as task_struct fits into a single byte and 4G/4G patches are accepted into mainline. It is also easy to encode this limitation into mechanical theorem provers. Signed-off-by:
-
Paul E. McKenney authored
The ->onofflock field in the rcu_state structure at one time synchronized CPU-hotplug operations for RCU. However, its scope has decreased over time so that it now only protects the lists of orphaned RCU callbacks. This commit therefore renames it to ->orphan_lock to reflect its current use. Signed-off-by:
-
Paul E. McKenney authored
The approach for mixing RCU and reference counting listed in the RCU documentation only describes one possible approach. This approach can result in failure on the read side, which is nice if you want fresh data, but not so good if you want simple code. This commit therefore adds two additional approaches that feature unconditional reference-count acquisition by RCU readers. These approaches are very similar to that used in the security code. Signed-off-by: -
Kees Cook authored
Mention kfree_rcu() in the call_rcu() section. Additionally fix the example code for list replacement that used the wrong structure element. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
- 27 Oct, 2012 3 commits
-
-
Frederic Weisbecker authored
On x86-64 syscall exit, 3 non exclusive events may happen looping in the following order: 1) Check if we need resched for user preemption, if so call schedule_user() 2) Check if we have pending signals, if so call do_notify_resume() 3) Check if we do syscall tracing, if so call syscall_trace_leave() However syscall_trace_leave() has been written assuming it directly follows the syscall and forget about the above possible 1st and 2nd steps. Now schedule_user() and do_notify_resume() exit in RCU user mode because they have most chances to resume userspace immediately and this avoids an rcu_user_enter() call in the syscall fast path. So by the time we call syscall_trace_leave(), we may well be in RCU user mode. To fix this up, simply call rcu_user_exit() in the beginning of this function. This fixes some reported RCU uses in extended quiescent state. Reported-by:
Dave Jones <davej@redhat.com> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Tested-by:
-
Lai Jiangshan authored
Use DEFINE_STATIC_SRCU() to simplify the rcutorture.c SRCU test code. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Reviewed-by:
-
Lai Jiangshan authored
In old days, we had two different API sets for dynamic-allocated per-CPU data and DEFINE_PER_CPU()-defined per_cpu data, and because SRCU used dynamic-allocated per-CPU data, its srcu_struct structures cannot be declared statically. This commit therefore introduces DEFINE_SRCU() and DEFINE_STATIC_SRCU() to allow statically declared SRCU structures, using the new static per-CPU interfaces. Signed-off-by:
-
- 24 Oct, 2012 1 commit
-
-
Paul Gortmaker authored
This commit adds a "try" missing from the end of the first paragraph of the RCU_USER_QS help text. [ paulmck: Also fix up the last paragraph a bit. ] Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
- 23 Oct, 2012 7 commits
-
-
Paul E. McKenney authored
In theory, if a grace period manages to get started despite there being no callbacks on any of the CPUs, all CPUs could go into dyntick-idle mode, so that the grace period would never end. This commit updates the RCU CPU stall warning messages to detect this condition by summing up the number of callbacks on all CPUs. Signed-off-by:
-
Paul E. McKenney authored
This commit causes the last grace period started and completed to be printed on RCU CPU stall warning messages in order to aid diagnosis. Signed-off-by:
-
Paul E. McKenney authored
The RCU CPU stall warnings rely on trigger_all_cpu_backtrace() to do NMI-based dump of the stack traces of all CPUs. Unfortunately, a number of architectures do not implement trigger_all_cpu_backtrace(), in which case RCU falls back to just dumping the stack of the running CPU. This is unhelpful in the case where the running CPU has detected that some other CPU has stalled. This commit therefore makes the running CPU dump the stacks of the tasks running on the stalled CPUs. Signed-off-by:
-
Lai Jiangshan authored
Because process_srcu() will be used in DEFINE_SRCU(), which is a macro that could be expanded pretty much anywhere, it can no longer be static. Note that process_srcu() is still internal to srcu.h. Signed-off-by:
-
Lai Jiangshan authored
Lai Jiangshan rewrote SRCU, so this commit ensures that he gets his proper share of blame^Wcredit. Signed-off-by:
-
Paul E. McKenney authored
The fix introduced by a10d206e (rcu: Fix day-one dyntick-idle stall-warning bug) has a C-language precedence error. It turns out that this error is harmless in that the same result is computed for all inputs, but the code is nevertheless a potential source of confusion. This commit therefore introduces parentheses in order to force the execution of the code to reflect the intent. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Antti P Miettinen authored
There have been some embedded applications that would benefit from use of expedited grace-period primitives. In some ways, this is similar to synchronize_net() doing either a normal or an expedited grace period depending on lock state, but with control outside of the kernel. This commit therefore adds rcu_expedited boot and sysfs parameters that cause the kernel to substitute expedited primitives for the normal grace-period primitives. [ paulmck: Add trace/event/rcu.h to kernel/srcu.c to avoid build error. Get rid of infinite loop through contention path.] Signed-off-by:
Antti P Miettinen <amiettinen@nvidia.com> Signed-off-by:
-
