Yangbo Lu says:

====================
Support Ocelot PTP Sync one-step timestamping

This patch-set is to support Ocelot PTP Sync one-step timestamping.
Actually before that, this patch-set cleans up and optimizes the
DSA slave tx timestamp request handling process.

Changes for v2:
	- Split tx timestamp optimization patch.
	- Updated doc patch.
	- Freed skb->cb usage in dsa core driver, and moved to device
	  drivers.
	- Other minor fixes.
Changes for v3:
	- Switched sequence of patch #3 and #4 with rebasing to fix build.
	- Replaced hard coded 48 of memset(skb->cb, 0, 48) with sizeof().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp
configuration, the PTP Sync one-step timestamping had never been supported.

This patch is to truely support it.

- ocelot_port_txtstamp_request()
  This function handles tx timestamp request by storing
  ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd,
  and additionally for two-step timestamp storing ts_id in
  OCELOT_SKB_CB(clone)->ptp_cmd.

- ocelot_ptp_rew_op()
  During xmit, this function is called to get rew_op (rewriter option) by
  checking skb->cb for tx timestamp request, and configure to transmitting.

Non-onestep-Sync packet with one-step timestamp request falls back to use
two-step timestamp.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to a common ocelot_port_txtstamp_request() for TX timestamp
request handling.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update timestamping doc for DSA switches to describe current
implementation accurately. On TX, the skb cloning is no longer
in DSA generic code.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Free skb->cb usage in core driver and let device drivers decide to
use or not. The reason having a DSA_SKB_CB(skb)->clone was because
dsa_skb_tx_timestamp() which may set the clone pointer was called
before p->xmit() which would use the clone if any, and the device
driver has no way to initialize the clone pointer.

This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning
of dsa_slave_xmit(). Some new features in the future, like one-step
timestamp may need more bytes of skb->cb to use in
dsa_skb_tx_timestamp(), and p->xmit().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was a waste to clone skb directly in dsa_skb_tx_timestamp().
For one-step timestamping, a clone was not needed. For any failure of
port_txtstamp (this may usually happen), the skb clone had to be freed.

So this patch moves skb cloning for tx timestamp out of dsa core, and
let drivers clone skb in port_txtstamp if they really need.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move ptp_classify_raw out of dsa core driver for handling tx
timestamp request. Let device drivers do this if they want.
Not all drivers want to limit tx timestamping for only PTP
packet.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check tx timestamp request in core driver at very beginning of
dsa_skb_tx_timestamp(), so that most skbs not requiring tx
timestamp just return. And drop such checking in device drivers.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

change 'privae' to 'private'
Signed-off-by: qhjindev <qhjin_dev@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .serdes_get_lane op used the magic value 0xff to indicate a valid
SERDES lane and 0 signaled that a non-SERDES mode was set on the port.

Unfortunately, "0" is also a valid lane ID, so even when these ports
where configured to e.g. RGMII the driver would set them up as SERDES
ports.

- Replace 0xff with 0 to indicate a valid lane ID. The number is on
  the one hand just as arbitrary, but it is at least the first valid one
  and therefore less of a surprise.

- Follow the other .serdes_get_lane implementations and return -ENODEV
  in the case where no SERDES is assigned to the port.

Fixes: f5be107c ("net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no real need for disabling autonigotiation in config_init().
Leave it enabled by default.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable offset is being assigned a value from a calculation
however the variable is never read, so this redundant variable
can be removed.

Cleans up the following clang-analyzer warning:

net/rxrpc/rxkad.c:579:2: warning: Value stored to 'offset' is never read
[clang-analyzer-deadcode.DeadStores].

net/rxrpc/rxkad.c:485:2: warning: Value stored to 'offset' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use 'hash_for_each_rcu' and 'hash_for_each_safe' instead of hand writing
them. This saves some lines of code, reduce indentation and improve
readability.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IPv6 Multicast Router Advertisements parsing has the following two
issues:

For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.

The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.

To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.

These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).

Fixes: 4b3087c7 ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>

In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..).
If some error happens in emac_tx_fill_tpd(), the skb will be freed via
dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd().
But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len).

As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len,
thus my patch assigns skb->len to 'len' before the possible free and
use 'len' instead of skb->len later.

Fixes: b9b17deb ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

while testing re-assembly/re-fragmentation using act_ct, it's possible to
observe a crash like the following one:

 KASAN: maybe wild-memory-access in range [0x0001000000000448-0x000100000000044f]
 CPU: 50 PID: 0 Comm: swapper/50 Tainted: G S                5.12.0-rc7+ #424
 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
 RIP: 0010:inet_frag_rbtree_purge+0x50/0xc0
 Code: 00 fc ff df 48 89 c3 31 ed 48 89 df e8 a9 7a 38 ff 4c 89 fe 48 89 df 49 89 c6 e8 5b 3a 38 ff 48 8d 7b 40 48 89 f8 48 c1 e8 03 <42> 80 3c 20 00 75 59 48 8d bb d0 00 00 00 4c 8b 6b 40 48 89 f8 48
 RSP: 0018:ffff888c31449db8 EFLAGS: 00010203
 RAX: 0000200000000089 RBX: 000100000000040e RCX: ffffffff989eb960
 RDX: 0000000000000140 RSI: ffffffff97cfb977 RDI: 000100000000044e
 RBP: 0000000000000900 R08: 0000000000000000 R09: ffffed1186289350
 R10: 0000000000000003 R11: ffffed1186289350 R12: dffffc0000000000
 R13: 000100000000040e R14: 0000000000000000 R15: ffff888155e02160
 FS:  0000000000000000(0000) GS:ffff888c31440000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00005600cb70a5b8 CR3: 0000000a2c014005 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  inet_frag_destroy+0xa9/0x150
  call_timer_fn+0x2d/0x180
  run_timer_softirq+0x4fe/0xe70
  __do_softirq+0x197/0x5a0
  irq_exit_rcu+0x1de/0x200
  sysvec_apic_timer_interrupt+0x6b/0x80
  </IRQ>

when act_ct temporarily stores an IP fragment, restoring the skb qdisc cb
results in putting random data in FRAG_CB(), and this causes those "wild"
memory accesses later, when the rbtree is purged. Never overwrite the skb
cb in case tcf_ct_handle_fragments() returns -EINPROGRESS.

Fixes: ae372cb1 ("net/sched: act_ct: fix restore the qdisc_skb_cb after defrag")
Fixes: 7baf2429 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ingo sent typo fixes for tools/ and this resulted in a warning when
building the perf/core branch that will be sent upstream in the next
merge window:

  Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
  diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h

Fix the typo on the kernel file to address this.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert Rockchip dwmac controller dt-bindings to YAML.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Rockchip DWMAC controllers, which are based on snps,dwmac.
Some of the SoCs require up to eight clocks, so maxItems
for clocks and clock-names need to be increased.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rockchip DWMAC glue driver uses the phy node (phy-handle)
reset specifier, and not a "mac-phy" reset specifier.

Remove it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8a12f883 ("net: hso: fix null-ptr-deref during tty device
unregistration") fixed the racy minor allocation reported by syzbot, but
introduced an unconditional NULL-pointer dereference on every disconnect
instead.

Specifically, the serial device table must no longer be accessed after
the minor has been released by hso_serial_tty_unregister().

Fixes: 8a12f883 ("net: hso: fix null-ptr-deref during tty device unregistration")
Cc: stable@vger.kernel.org
Cc: Anirudh Rayabharam <mail@anirudhrb.com>
Reported-by: Leonardo Antoniazzi <leoanto@aruba.it>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.13-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-04-26

this is a pull request of 4 patches for net-next/master.

the first two patches are from Colin Ian King and target the
etas_es58x driver, they add a missing NULL pointer check and fix some
typos.

The next two patches are by Erik Flodin. The first one updates the CAN
documentation regarding filtering, the other one fixes the header
alignment in CAN related proc output on 64 bit systems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable ret is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/davicom/dm9000.c:1527:5: warning: Value stored to
'ret' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable prev_link and curr_link is being assigned a value from a
calculation however the variable is never read, so this redundant
variable can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/ethernet/amd/pcnet32.c:2857:4: warning: Value stored to
'prev_link' is never read [clang-analyzer-deadcode.DeadStores].

drivers/net/ethernet/amd/pcnet32.c:2856:4: warning: Value stored to
'curr_link' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) The various ip(6)table_foo incarnations are updated to expect
   that the table is passed as 'void *priv' argument that netfilter core
   passes to the hook functions. This reduces the struct net size by 2
   cachelines on x86_64. From Florian Westphal.

2) Add cgroupsv2 support for nftables.

3) Fix bridge log family merge into nf_log_syslog: Missing
   unregistration from netns exit path, from Phil Sutter.

4) Add nft_pernet() helper to access nftables pernet area.

5) Add struct nfnl_info to reduce nfnetlink callback footprint and
   to facilite future updates. Consolidate nfnetlink callbacks.

6) Add CONFIG_NETFILTER_XTABLES_COMPAT Kconfig knob, also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The compat layer needs to parse untrusted input (the ruleset)
to translate it to a 64bit compatible format.

We had a number of bugs in this department in the past, so allow users
to turn this feature off.

Add CONFIG_NETFILTER_XTABLES_COMPAT kconfig knob and make it default to y
to keep existing behaviour.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add enum nfnl_callback_type to identify the callback type to provide one
single callback.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Update batch callbacks to use the nfnl_info structure. Rename one
clashing info variable to expr_info.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Update rcu callbacks to use the nfnl_info structure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add a new structure to reduce callback footprint and to facilite
extensions of the nfnetlink callback interface in the future.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Consolidate call to net_generic(net, nf_tables_net_id) in this
wrapper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Michael Chan says:

====================
bnxt_en: Updates for net-next.

This series includes these main enhancements:

1. Link related changes
    - add NRZ/PAM4 link signal mode to the link up message if known
    - rely on firmware to bring down the link during ifdown

2. SRIOV related changes
    - allow VF promiscuous mode if the VF is trusted
    - allow ndo operations to configure VF when the PF is ifdown
    - fix the scenario of the VF taking back control of it's MAC address
    - add Hyper-V VF device IDs

3. Support the option to transmit without FCS/CRC.

4. Implement .ndo_features_check() to disable offload when the UDP
   encap. packets are not supported.

v2: Patch10: Reverse the check for supported UDP ports to be more straight
forward.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For UDP encapsultions, we only support the offloaded Vxlan port and
Geneve port.  All other ports included FOU and GUE are not supported so
we need to turn off TSO and checksum features.

v2: Reverse the check for supported UDP ports to be more straight forward.
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If firmware is capable, set the IFF_SUPP_NOFCS flag to support the
sockets option to transmit packets without FCS.  This is mainly used
for testing.

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support VF device IDs used by the Hyper-V hypervisor.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the PF is no longer enforcing an assigned MAC address on a VF, the
VF needs to call bnxt_approve_mac() to tell the PF what MAC address it is
now using.  Otherwise it gets out of sync and the PF won't know what
MAC address the VF wants to use.  Ultimately the VF will fail when it
tries to setup the L2 MAC filter for the vnic.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move it before bnxt_update_vf_mac().  In the next patch, we need to call
bnxt_approve_mac() from bnxt_update_mac() under some conditions.  This
will avoid forward declaration.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is perfectly legal for the stack to query and configure VFs via PF
NDOs while the NIC is administratively down.  Remove the unnecessary
check for the PF to be in open state.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Firmware previously only allowed promiscuous mode for VFs associated with
a default VLAN. It is now possible to enable promiscuous mode for a VF
having no VLAN configured provided that it is trusted. In such cases the
VF will see all packets received by the PF, irrespective of destination
MAC or VLAN.

Note, it is necessary to query firmware at the time of bnxt_promisc_ok()
instead of in bnxt_hwrm_func_qcfg() because the trusted status might be
altered by the PF after the VF has been configured. This check must now
also be deferred because the firmware call sleeps.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>