With a minor tweaks regarding minimum extent size to discard and
discarded bytes reporting the FITRIM can be enabled on bigalloc file
system and it works without any problem.

This patch fixes minlen handling and discarded bytes reporting to
take into consideration bigalloc enabled file systems and finally
removes the restriction and allow FITRIM to be used on file system with
bigalloc feature enabled.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

CC: <stable@vger.kernel.org> # >= 2.6.32
Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>

ext4_special_inode_operations have their own ifdef CONFIG_EXT4_FS_XATTR
to mask those methods. And ext4_iget also always sets it, so there is
an inconsistency.
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Remove unused function ext4_ext_check_cache() and merge the code back to
the ext4_ext_in_cache().
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Uninitialized extent may became initialized(parallel writeback task)
at any moment after we drop i_data_sem, so we have to recheck extent's
state after we hold page's lock and i_data_sem.

If we about to change page's mapping we must hold page's lock in order to
serialize other users.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Non-full list of bugs:
1) uninitialized extent optimization does not hold page's lock,
   and simply replace brunches after that writeback code goes
   crazy because block mapping changed under it's feets
   kernel BUG at fs/ext4/inode.c:1434!  ( 288'th xfstress)

2) uninitialized extent may became initialized right after we
   drop i_data_sem, so extent state must be rechecked

3) Locked pages goes uptodate via following sequence:
   ->readpage(page); lock_page(page); use_that_page(page)
   But after readpage() one may invalidate it because it is
   uptodate and unlocked (reclaimer does that)
   As result kernel bug at include/linux/buffer_head.c:133!

4) We call write_begin() with already opened stansaction which
   result in following deadlock:
->move_extent_per_page()
  ->ext4_journal_start()-> hold journal transaction
  ->write_begin()
    ->ext4_da_write_begin()
      ->ext4_nonda_switch()
        ->writeback_inodes_sb_if_idle()  --> will wait for journal_stop()

5) try_to_release_page() may fail and it does fail if one of page's bh was
   pinned by journal

6) If we about to change page's mapping we MUST hold it's lock during entire
   remapping procedure, this is true for both pages(original and donor one)

Fixes:

- Avoid (1) and (2) simply by temproraly drop uninitialized extent handling
  optimization, this will be reimplemented later.

- Fix (3) by manually forcing page to uptodate state w/o dropping it's lock

- Fix (4) by rearranging existing locking:
  from: journal_start(); ->write_begin
  to: write_begin(); journal_extend()
- Fix (5) simply by checking retvalue
- Fix (6) by locking both (original and donor one) pages during extent swap
  with help of mext_page_double_lock()
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Proper block swap for inodes with full journaling enabled is
truly non obvious task. In order to be on a safe side let's
explicitly disable it for now.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

- Remove usless checks, because it is too late to check that inode != NULL
  at the moment it was referenced several times.
- Double lock routines looks very ugly and locking ordering relays on
  order of i_ino, but other kernel code rely on order of pointers.
  Let's make them simple and clean.
- check that inodes belongs to the same SB as soon as possible.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

When performing an online resize, we add a bunch of groups at one time
in ext4_flex_group_add, so in most cases a lot of group descriptors
will be in the same group block. But in the end of this function,
update_backups will be called for every group descriptor and the same
block will be copied and journalled again and again.  It is really a
waste.

Fix things so we only update a particular bg descriptor block once and
skip subsequent updates of the same block.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

bh_submit_read() is responsible for unlock bh on endio.  In addition,
we need to use bh_uptodate_or_lock() to avoid races.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Recently, I ecountered some corrupted filesystems in which some
groups' free inode counts were 65535, it seemed that free inode
count was overflow.  This patch teaches ext4 to check free inode
count before allocaing an inode.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Free block counters should be checked before doing allocation.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The crash was caused by a variable being erronously declared static in
token2str().

In addition to /proc/mounts, the problem can also be easily replicated
by accessing /proc/fs/ext4/<partition>/options in parallel:

$ cat /proc/fs/ext4/<partition>/options > options.txt

... and then running the following command in two different terminals:

$ while diff /proc/fs/ext4/<partition>/options options.txt; do true; done

This is also the cause of the following a crash while running xfstests
#234, as reported in the following bug reports:

	https://bugs.launchpad.net/bugs/1053019
	https://bugzilla.kernel.org/show_bug.cgi?id=47731Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Figg <brad.figg@canonical.com>
Cc: stable@vger.kernel.org

The update_backups() function is used to backup all the metadata
blocks, so we should not take it for granted that 'data' is pointed to
a super block and use ext4_superblock_csum_set to calculate the
checksum there.  In case where the data is a group descriptor block,
it will corrupt the last group descriptor, and then e2fsck will
complain about it it.

As all the metadata checksums should already be OK when we do the
backup, remove the wrong ext4_superblock_csum_set and it should be
just fine.
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

In ext4_nonda_switch(), if the file system is getting full we used to
call writeback_inodes_sb_if_idle().  The problem is that we can be
holding i_mutex already, and this causes a potential deadlock when
writeback_inodes_sb_if_idle() when it tries to take s_umount.  (See
lockdep output below).

As it turns out we don't need need to hold s_umount; the fact that we
are in the middle of the write(2) system call will keep the superblock
pinned.  Unfortunately writeback_inodes_sb() checks to make sure
s_umount is taken, and the VFS uses a different mechanism for making
sure the file system doesn't get unmounted out from under us.  The
simplest way of dealing with this is to just simply grab s_umount
using a trylock, and skip kicking the writeback flusher thread in the
very unlikely case that we can't take a read lock on s_umount without
blocking.

Also, we now check the cirteria for kicking the writeback thread
before we decide to whether to fall back to non-delayed writeback, so
if there are any outstanding delayed allocation writes, we try to get
them resolved as soon as possible.

   [ INFO: possible circular locking dependency detected ]
   3.6.0-rc1-00042-gce894ca #367 Not tainted
   -------------------------------------------------------
   dd/8298 is trying to acquire lock:
    (&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46

   but task is already holding lock:
    (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3

   which lock already depends on the new lock.

   2 locks held by dd/8298:
    #0:  (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3
    #1:  (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3

   stack backtrace:
   Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367
   Call Trace:
    [<c015b79c>] ? console_unlock+0x345/0x372
    [<c06d62a1>] print_circular_bug+0x190/0x19d
    [<c019906c>] __lock_acquire+0x86d/0xb6c
    [<c01999db>] ? mark_held_locks+0x5c/0x7b
    [<c0199724>] lock_acquire+0x66/0xb9
    [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
    [<c06db935>] down_read+0x28/0x58
    [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
    [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
    [<c026f3b2>] ext4_nonda_switch+0xe1/0xf4
    [<c0271ece>] ext4_da_write_begin+0x27/0x193
    [<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb
    [<c01ddc47>] __generic_file_aio_write+0x1dd/0x205
    [<c01ddce7>] generic_file_aio_write+0x78/0xd3
    [<c026d336>] ext4_file_write+0x480/0x4a6
    [<c0198c1d>] ? __lock_acquire+0x41e/0xb6c
    [<c0180944>] ? sched_clock_cpu+0x11a/0x13e
    [<c01967e9>] ? trace_hardirqs_off+0xb/0xd
    [<c018099f>] ? local_clock+0x37/0x4e
    [<c0209f2c>] do_sync_write+0x67/0x9d
    [<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44
    [<c020a7b9>] vfs_write+0x7b/0xe6
    [<c020a9a6>] sys_write+0x3b/0x64
    [<c06dd4bd>] syscall_call+0x7/0xb
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Do not iterate over data blocks scanning for bh's to forget as they're
never exist. This improves time taken by unlink / truncate syscall.
Tested by continuously truncating file that is being written by dd.
Another test is rm -rf of linux tree while tar unpacks it. With
ordered data mode condition unlikely(!tbh) was always met in
ext4_free_blocks. With journal data mode tbh was found only few times,
so optimisation is also possible.

Unlinking fallocated 60G file after doing sync && echo 3 >
/proc/sys/vm/drop_caches && time rm --help

X86 before (linux 3.6-rc4):
# time rm -f test1
real    0m2.710s
user    0m0.000s
sys     0m1.530s

X86 after:
# time rm -f test1
real    0m0.644s
user    0m0.003s
sys     0m0.060s

MIPS before (linux 2.6.37):
# time rm -f test1
real    0m 4.93s
user    0m 0.00s
sys     0m 4.61s

MIPS after:
# time rm -f test1
real    0m 0.16s
user    0m 0.00s
sys     0m 0.06s
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>

Commit 1c6bd717 introduced a regression where an online resize
operation which did not change the number of block groups would fail,
i.e:

	mke2fs -t /dev/vdc 60000
	mount /dev/vdc
	resize2fs /dev/vdc 60001

This was due to a bug in the logic regarding when to try converting
the filesystem to use meta_bg.

Also fix up a number of other minor issues with the online resizing
code: (a) Fix a sparse warning; (b) only check to make sure the device
is large enough once, instead of multiple times through the resize
loop.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Instead of checking whether the handle is valid, we check if journal
is enabled. This avoids taking the s_orphan_lock mutex in all cases
when there is no journal in use, including the error paths where
ext4_orphan_del() is called with a handle set to NULL.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This is a revert of commit b56ff9d3, which removed the call to
ext4_issue_discard() to fix a BUG reported because
ext4_issue_discard() was being called from inside a block group
spinlock.  As it turns out this bug had already been fixed by Lukas
Czerner in commit 53fdcf99 by the simple expedient of moving when
we call ext4_issue_discard() outside the spinlock.

So it should be safe to re-enable this functionality, which I tested
by putting an BUG_ON(in_atomic) just after the restored callsite to
ext4_issue_discard().

Addresses-Google-Bug: #6750518
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Anatol Pomozov <anatol.pomozov@gmail.com>

htree_dirblock_to_tree() declares a non-initialized 'err' variable,
which is passed as a reference to another functions expecting them to
set this variable with their error codes.

It's passed to ext4_bread(), which then passes it to ext4_getblk(). If
ext4_map_blocks() returns 0 due to a lookup failure, leaving the
ext4_getblk() buffer_head uninitialized, it will make ext4_getblk()
return to ext4_bread() without initialize the 'err' variable, and
ext4_bread() will return to htree_dirblock_to_tree() with this variable
still uninitialized.  htree_dirblock_to_tree() will pass this variable
with garbage back to ext4_htree_fill_tree(), which expects a number of
directory entries added to the rb-tree. which, in case, might return a
fake non-zero value due the garbage left in the 'err' variable, leading
the kernel to an Oops in ext4_dx_readdir(), once this is expecting a
filled rb-tree node, when in turn it will have a NULL-ed one, causing an
invalid page request when trying to get a fname struct from this NULL-ed
rb-tree node in this line:

fname = rb_entry(info->curr_node, struct fname, rb_hash);

The patch itself initializes the err variable in
htree_dirblock_to_tree() to avoid usage mistakes by the called
functions, and also fix ext4_getblk() to return a initialized 'err'
variable when ext4_map_blocks() fails a lookup.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

For very long online resizes, a periodic update to the console log is
helpful for debugging and for progress reporting.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

If we have run out of reserved gdt blocks, then clear the resize_inode
feature and enable the meta_bg feature, so that we can continue
resizing the file system seamlessly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Set bg_itable_unused for file systems that have uninit_bg enabled.
This will speed up the first e2fsck run after the file system is
resized.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This patch adds support for resizing file systems with the meta_bg and
64bit features.

[ Added a fix by tytso to fix a divide by zero when resizing a
  filesystem from 14 TB to 18TB.  Also fixed overhead accounting for
  meta_bg file systems.]
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Previously we allocated the s_group_info array with enough space for
any future possible growth of the file system via online resize.  This
is unfortunate because it wastes memory, and it doesn't work for the
meta_bg scheme, since there is no limit based on the number of
reserved gdt blocks.  So add the code to grow the s_group_info array
as needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Previously, we allocated the s_flex_groups array to the maximum size
that the file system could be resized.  There was two problems with
this approach.  First, it wasted memory in the common case where the
file system was not resized.  Secondly, once we start allowing online
resizing using the meta_bg scheme, there is no maximum size that the
file system can be resized.  So instead, we need to grow the
s_flex_groups at inline resize time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The resize code was needlessly writing the backup block group
descriptor blocks multiple times (once per block group) during an
online resize.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

The resize code was copying blocks at the beginning of each block
group in order to copy the superblock and block group descriptor table
(gdt) blocks.  This was, unfortunately, being done even for block
groups that did not have super blocks or gdt blocks.  This is a
complete waste of perfectly good I/O bandwidth, to skip writing those
blocks for sparse bg's.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Avoid changing o_blocks_count, since it is used later when reporting
old blocks count in debug mode.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

If the last group does not have enough space for group tables, ignore
it instead of calling BUG_ON().
Reported-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

In patch cb20d518, ext4_set_bh_endio
and ext4_end_io_buffer_write are declared at the beginning of inode.c,
and again later on in the middle of the file.  Remove the second set
of duplicated function declarations.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

While performing punch hole for an inode, i_disksize is not changed.
So, there is no need to add the inode to orphan list.
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This sequence:

# truncate --size=1g fsfile
# mkfs.ext4 -F fsfile
# mount -o loop,ro fsfile /mnt
# umount /mnt
# dmesg | tail

results in an IO error when unmounting the RO filesystem:

[  318.020828] Buffer I/O error on device loop1, logical block 196608
[  318.027024] lost page write due to I/O error on loop1
[  318.032088] JBD2: Error -5 detected when updating journal superblock for loop1-8.

This was a regression introduced by commit 24bcc89c: "jbd2: split
updating of journal superblock and marking journal empty".
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Fixes the following sparse warning:
fs/ext4/super.c:1672:45: warning: Using plain integer as NULL pointer
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

We don't need lock_super()/unlock_super() any more, since the places
where it is used, we are protected by the s_umount r/w semaphore.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Marco Stornelli <marco.stornelli@gmail.com>

In the very unlikely case that kset_create_and_add() fails when the
ext4.ko module is being loaded (or during kernel startup) set err so
that it's clear that the module load failed.

https://bugzilla.kernel.org/show_bug.cgi?id=27912Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>