- 09 Jun, 2021 6 commits
-
-
Clément Lassieur authored
Every time the hub signals a reset while we (device) are hsotg->connected, dwc2_hsotg_core_init_disconnected() is called, which in turn calls dwc2_hs_phy_init(). GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the default one: 0x5, corresponding to 16-bit) is always different from hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every time (usbcfg != usbcfg_old), which causes 2 issues: 1) The call to dwc2_core_reset() does another reset 300us after the initial Chirp K of the first reset (which should last at least Tuch = 1ms), and messes up the High-speed Detection Handshake: both hub and device drive current into the D+ and D- lines at the same time. 2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always the default one (0x5). Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset() fixes both issues. It is now set even when select_phy is false because the cost of the Core Soft Reset is removed. Fixes: 1e868545 ("usb: dwc2: gadget: Move gadget phy init into core phy init") Signed-off-by:
Clément Lassieur <clement@lassieur.org> Link: https://lore.kernel.org/r/20210603155921.940651-1-clement@lassieur.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Gabbasov authored
FunctionFS device structure 'struct ffs_dev' and driver data structure 'struct ffs_data' are bound to each other with cross-reference pointers 'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one is supposed to be valid through the whole life of 'struct ffs_data' (and while 'struct ffs_dev' exists non-freed), the second one is cleared in 'ffs_closed()' (called from 'ffs_data_reset()' or the last 'ffs_data_put()'). This can be called several times, alternating in different order with 'ffs_free_inst()', that, if possible, clears the other cross-reference. As a result, different cases of these calls order may leave stale cross-reference pointers, used when the pointed structure is already freed. Even if it occasionally doesn't cause kernel crash, this error is reported by KASAN-enabled kernel configuration. For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was fixed by commit cdafb6d8 ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst"). The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()'] now causes KASAN reported error [1], when 'ffs_data_reset()' clears 'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev', but can't clear 'ffs_data->private_data', which is then accessed in 'ffs_closed()' called from 'ffs_data_put()'. This happens since 'ffs_dev->ffs_data' reference is cleared too early. Moreover, one more use case, when 'ffs_free_inst()' is called immediately after mounting FunctionFS device (that is before the descriptors are written and 'ffs_ready()' is called), and then 'ffs_data_reset()' or 'ffs_data_put()' is called from accessing "ep0" file or unmounting the device. This causes KASAN error report like [2], since 'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly clear 'ffs_data->private_data', that is later accessed to freed structure. Fix these (and may be other) cases of stale pointers access by moving setting and clearing of the mentioned cross-references to the single places, setting both of them when 'struct ffs_data' is created and bound to 'struct ffs_dev', and clearing both of them when one of the structures is destroyed. It seems convenient to make this pointer initialization and structures binding in 'ffs_acquire_dev()' and make pointers clearing in 'ffs_release_dev()'. This required some changes in these functions parameters and return types. Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()' is called without unmounting the device, and "release_dev" callback is not called at all, or (2) "release_dev" callback is called before "ffs_closed" callback on unmounting, which seems to be not correctly nested with "acquire_dev" and "ffs_ready" callbacks. Make this cleanup togther with other mentioned 'ffs_release_dev()' changes. [1] ================================================================== root@rcar-gen3:~# mkdir /dev/cfs root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 64.340664] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# cd /dev/ffs root@rcar-gen3:/dev/ffs# /home/root/ffs-test ffs-test: info: ep0: writing descriptors (in v2 format) [ 83.181442] read descriptors [ 83.186085] read strings ffs-test: info: ep0: writing strings ffs-test: dbg: ep1: starting ffs-test: dbg: ep2: starting ffs-test: info: ep1: starts ffs-test: info: ep2: starts ffs-test: info: ep0: starts ^C root@rcar-gen3:/dev/ffs# cd /home/root/ root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 98.935061] unloading root@rcar-gen3:~# umount /dev/ffs [ 102.734301] ================================================================== [ 102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997 [ 102.756709] [ 102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ #8 [ 102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 102.772179] Call trace: [ 102.774779] dump_backtrace+0x0/0x330 [ 102.778653] show_stack+0x20/0x2c [ 102.782152] dump_stack+0x11c/0x1ac [ 102.785833] print_address_description.constprop.0+0x30/0x274 [ 102.791862] kasan_report+0x14c/0x1c8 [ 102.795719] __asan_report_store1_noabort+0x34/0x58 [ 102.800840] ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.805801] ffs_fs_kill_sb+0x50/0x84 [usb_f_fs] [ 102.810663] deactivate_locked_super+0xa0/0xf0 [ 102.815339] deactivate_super+0x98/0xac [ 102.819378] cleanup_mnt+0xd0/0x1b0 [ 102.823057] __cleanup_mnt+0x1c/0x28 [ 102.826823] task_work_run+0x104/0x180 [ 102.830774] do_notify_resume+0x458/0x14e0 [ 102.835083] work_pending+0xc/0x5f8 [ 102.838762] [ 102.840357] Allocated by task 2988: [ 102.844032] kasan_save_stack+0x28/0x58 [ 102.848071] kasan_set_track+0x28/0x3c [ 102.852016] ____kasan_kmalloc+0x84/0x9c [ 102.856142] __kasan_kmalloc+0x10/0x1c [ 102.860088] __kmalloc+0x214/0x2f8 [ 102.863678] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 102.868990] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 102.873942] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 102.880629] usb_get_function_instance+0x64/0x68 [libcomposite] [ 102.886858] function_make+0x128/0x1ec [libcomposite] [ 102.892185] configfs_mkdir+0x330/0x590 [configfs] [ 102.897245] vfs_mkdir+0x12c/0x1bc [ 102.900835] do_mkdirat+0x180/0x1d0 [ 102.904513] __arm64_sys_mkdirat+0x80/0x94 [ 102.908822] invoke_syscall+0xf8/0x25c [ 102.912772] el0_svc_common.constprop.0+0x150/0x1a0 [ 102.917891] do_el0_svc+0xa0/0xd4 [ 102.921386] el0_svc+0x24/0x34 [ 102.924613] el0_sync_handler+0xcc/0x154 [ 102.928743] el0_sync+0x198/0x1c0 [ 102.932238] [ 102.933832] Freed by task 2996: [ 102.937144] kasan_save_stack+0x28/0x58 [ 102.941181] kasan_set_track+0x28/0x3c [ 102.945128] kasan_set_free_info+0x28/0x4c [ 102.949435] ____kasan_slab_free+0x104/0x118 [ 102.953921] __kasan_slab_free+0x18/0x24 [ 102.958047] slab_free_freelist_hook+0x148/0x1f0 [ 102.962897] kfree+0x318/0x440 [ 102.966123] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 102.971075] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 102.977302] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 102.982344] config_item_put+0x140/0x1a4 [configfs] [ 102.987486] configfs_rmdir+0x3fc/0x518 [configfs] [ 102.992535] vfs_rmdir+0x114/0x234 [ 102.996122] do_rmdir+0x274/0x2b0 [ 102.999617] __arm64_sys_unlinkat+0x94/0xc8 [ 103.004015] invoke_syscall+0xf8/0x25c [ 103.007961] el0_svc_common.constprop.0+0x150/0x1a0 [ 103.013080] do_el0_svc+0xa0/0xd4 [ 103.016575] el0_svc+0x24/0x34 [ 103.019801] el0_sync_handler+0xcc/0x154 [ 103.023930] el0_sync+0x198/0x1c0 [ 103.027426] [ 103.029020] The buggy address belongs to the object at ffff0004d46ff500 [ 103.029020] which belongs to the cache kmalloc-128 of size 128 [ 103.042079] The buggy address is located 73 bytes inside of [ 103.042079] 128-byte region [ffff0004d46ff500, ffff0004d46ff580) [ 103.054236] The buggy address belongs to the page: [ 103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe [ 103.070437] head:0000000021aa849b order:1 compound_mapcount:0 [ 103.076456] flags: 0x8000000000010200(slab|head|zone=2) [ 103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300 [ 103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000 [ 103.098150] page dumped because: kasan: bad access detected [ 103.103985] [ 103.105578] Memory state around the buggy address: [ 103.110602] ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.118161] ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.133284] ^ [ 103.139120] ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.146679] ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.154238] ================================================================== [ 103.161792] Disabling lock debugging due to kernel taint [ 103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e [ 103.175406] Mem abort info: [ 103.178457] ESR = 0x96000004 [ 103.181609] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.187020] SET = 0, FnV = 0 [ 103.190185] EA = 0, S1PTW = 0 [ 103.193417] Data abort info: [ 103.196385] ISV = 0, ISS = 0x00000004 [ 103.200315] CM = 0, WnR = 0 [ 103.203366] [0037801d6000018e] address between user and kernel address ranges [ 103.210611] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4 [ 103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G B 5.13.0-rc4+ #8 [ 103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 103.290385] sp : ffff800014777a80 [ 103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000 [ 103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4 [ 103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0 [ 103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000 [ 103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658 [ 103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648 [ 103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000 [ 103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001 [ 103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70 [ 103.365766] Call trace: [ 103.368235] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.373076] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 103.377829] ffs_data_closed+0x1ec/0x244 [usb_f_fs] [ 103.382755] ffs_fs_kill_sb+0x70/0x84 [usb_f_fs] [ 103.387420] deactivate_locked_super+0xa0/0xf0 [ 103.391905] deactivate_super+0x98/0xac [ 103.395776] cleanup_mnt+0xd0/0x1b0 [ 103.399299] __cleanup_mnt+0x1c/0x28 [ 103.402906] task_work_run+0x104/0x180 [ 103.406691] do_notify_resume+0x458/0x14e0 [ 103.410823] work_pending+0xc/0x5f8 [ 103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 103.420490] ---[ end trace 57b43a50e8244f57 ]--- Segmentation fault root@rcar-gen3:~# ================================================================== [2] ================================================================== root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 54.766480] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 63.197597] unloading root@rcar-gen3:~# cat /dev/ffs/ep0 cat: read error:[ 67.213506] ================================================================== [ 67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994 [ 67.236446] [ 67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ #8 [ 67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.251624] Call trace: [ 67.254212] dump_backtrace+0x0/0x330 [ 67.258081] show_stack+0x20/0x2c [ 67.261579] dump_stack+0x11c/0x1ac [ 67.265260] print_address_description.constprop.0+0x30/0x274 [ 67.271286] kasan_report+0x14c/0x1c8 [ 67.275143] __asan_report_store1_noabort+0x34/0x58 [ 67.280265] ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.285220] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.290172] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.295305] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.300256] __fput+0x304/0x580 [ 67.303576] ____fput+0x18/0x24 [ 67.306893] task_work_run+0x104/0x180 [ 67.310846] do_notify_resume+0x458/0x14e0 [ 67.315154] work_pending+0xc/0x5f8 [ 67.318834] [ 67.320429] Allocated by task 2988: [ 67.324105] kasan_save_stack+0x28/0x58 [ 67.328144] kasan_set_track+0x28/0x3c [ 67.332090] ____kasan_kmalloc+0x84/0x9c [ 67.336217] __kasan_kmalloc+0x10/0x1c [ 67.340163] __kmalloc+0x214/0x2f8 [ 67.343754] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 67.349066] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 67.354017] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 67.360705] usb_get_function_instance+0x64/0x68 [libcomposite] [ 67.366934] function_make+0x128/0x1ec [libcomposite] [ 67.372260] configfs_mkdir+0x330/0x590 [configfs] [ 67.377320] vfs_mkdir+0x12c/0x1bc [ 67.380911] do_mkdirat+0x180/0x1d0 [ 67.384589] __arm64_sys_mkdirat+0x80/0x94 [ 67.388899] invoke_syscall+0xf8/0x25c [ 67.392850] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.397969] do_el0_svc+0xa0/0xd4 [ 67.401464] el0_svc+0x24/0x34 [ 67.404691] el0_sync_handler+0xcc/0x154 [ 67.408819] el0_sync+0x198/0x1c0 [ 67.412315] [ 67.413909] Freed by task 2993: [ 67.417220] kasan_save_stack+0x28/0x58 [ 67.421257] kasan_set_track+0x28/0x3c [ 67.425204] kasan_set_free_info+0x28/0x4c [ 67.429513] ____kasan_slab_free+0x104/0x118 [ 67.434001] __kasan_slab_free+0x18/0x24 [ 67.438128] slab_free_freelist_hook+0x148/0x1f0 [ 67.442978] kfree+0x318/0x440 [ 67.446205] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 67.451156] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 67.457385] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 67.462428] config_item_put+0x140/0x1a4 [configfs] [ 67.467570] configfs_rmdir+0x3fc/0x518 [configfs] [ 67.472626] vfs_rmdir+0x114/0x234 [ 67.476215] do_rmdir+0x274/0x2b0 [ 67.479710] __arm64_sys_unlinkat+0x94/0xc8 [ 67.484108] invoke_syscall+0xf8/0x25c [ 67.488055] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.493175] do_el0_svc+0xa0/0xd4 [ 67.496671] el0_svc+0x24/0x34 [ 67.499896] el0_sync_handler+0xcc/0x154 [ 67.504024] el0_sync+0x198/0x1c0 [ 67.507520] [ 67.509114] The buggy address belongs to the object at ffff0004c26e9700 [ 67.509114] which belongs to the cache kmalloc-128 of size 128 [ 67.522171] The buggy address is located 74 bytes inside of [ 67.522171] 128-byte region [ffff0004c26e9700, ffff0004c26e9780) [ 67.534328] The buggy address belongs to the page: [ 67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8 [ 67.549175] head:000000003177a217 order:1 compound_mapcount:0 [ 67.555195] flags: 0x8000000000010200(slab|head|zone=2) [ 67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300 [ 67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 67.576890] page dumped because: kasan: bad access detected [ 67.582725] [ 67.584318] Memory state around the buggy address: [ 67.589343] ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.596903] ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.612022] ^ [ 67.617860] ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.625421] ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.632981] ================================================================== [ 67.640535] Disabling lock debugging due to kernel taint File descriptor[ 67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d in bad state [ 67.655456] Mem abort info: [ 67.659619] ESR = 0x96000004 [ 67.662801] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.668225] SET = 0, FnV = 0 [ 67.671375] EA = 0, S1PTW = 0 [ 67.674613] Data abort info: [ 67.677587] ISV = 0, ISS = 0x00000004 [ 67.681522] CM = 0, WnR = 0 [ 67.684588] [fabb801d4000018d] address between user and kernel address ranges [ 67.691849] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4 [ 67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G B 5.13.0-rc4+ #8 [ 67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 67.771365] sp : ffff800014767ad0 [ 67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0 [ 67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d [ 67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0 [ 67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000 [ 67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa [ 67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014 [ 67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000 [ 67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001 [ 67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d [ 67.846748] Call trace: [ 67.849218] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.854058] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.858810] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.863736] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.868488] __fput+0x304/0x580 [ 67.871665] ____fput+0x18/0x24 [ 67.874837] task_work_run+0x104/0x180 [ 67.878622] do_notify_resume+0x458/0x14e0 [ 67.882754] work_pending+0xc/0x5f8 [ 67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 67.892422] ---[ end trace 6d7cedf53d7abbea ]--- Segmentation fault root@rcar-gen3:~# ================================================================== Fixes: 4b187fce ("usb: gadget: FunctionFS: add devices management code") Fixes: 3262ad82 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference") Fixes: cdafb6d8 ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst") Reported-by:
Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com> Tested-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20210603171507.22514-1-andrew_gabbasov@mentor.comSigned-off-by:
-
Sven Peter authored
Currently, the dwc3 platform driver does not explicitly ask for a DMA mask. This makes it fall back to the default 32-bit mask which breaks the driver on systems that only have RAM starting above the first 4G like the Apple M1 SoC. Fix this by calling dma_set_mask_and_coherent with a 64bit mask. Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20210607061751.89752-1-sven@svenpeter.devSigned-off-by:
-
Alan Stern authored
The USB core has utility routines to retrieve various types of descriptors. These routines will now provoke a WARN if they are asked to retrieve 0 bytes (USB "receive" requests must not have zero length), so avert this by checking the size argument at the start. CC: Johan Hovold <johan@kernel.org> Reported-and-tested-by: syzbot+7dbcd9ff34dc4ed45240@syzkaller.appspotmail.com Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210607152307.GD1768031@rowland.harvard.eduSigned-off-by:
-
Baokun Li authored
Using list_move() instead of list_del() + list_add(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20210609070612.1325044-1-libaokun1@huawei.comSigned-off-by:
-
Peter Chen authored
When do system reboot, it calls dwc3_shutdown and the whole debugfs for dwc3 has removed first, when the gadget tries to do deinit, and remove debugfs for its endpoints, it meets NULL pointer dereference issue when call debugfs_lookup. Fix it by removing the whole dwc3 debugfs later than dwc3_drd_exit. [ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002 .... [ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 2925.037005] pc : inode_permission+0x2c/0x198 [ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8 [ 2925.045903] sp : ffff80001276ba70 [ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000 [ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100 [ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001 [ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000 [ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004 [ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030 [ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420 [ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080 [ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065 [ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188 [ 2925.120671] Call trace: [ 2925.123119] inode_permission+0x2c/0x198 [ 2925.127042] lookup_one_len_common+0xb0/0xf8 [ 2925.131315] lookup_one_len_unlocked+0x34/0xb0 [ 2925.135764] lookup_positive_unlocked+0x14/0x50 [ 2925.140296] debugfs_lookup+0x68/0xa0 [ 2925.143964] dwc3_gadget_free_endpoints+0x84/0xb0 [ 2925.148675] dwc3_gadget_exit+0x28/0x78 [ 2925.152518] dwc3_drd_exit+0x100/0x1f8 [ 2925.156267] dwc3_remove+0x11c/0x120 [ 2925.159851] dwc3_shutdown+0x14/0x20 [ 2925.163432] platform_shutdown+0x28/0x38 [ 2925.167360] device_shutdown+0x15c/0x378 [ 2925.171291] kernel_restart_prepare+0x3c/0x48 [ 2925.175650] kernel_restart+0x1c/0x68 [ 2925.179316] __do_sys_reboot+0x218/0x240 [ 2925.183247] __arm64_sys_reboot+0x28/0x30 [ 2925.187262] invoke_syscall+0x48/0x100 [ 2925.191017] el0_svc_common.constprop.0+0x48/0xc8 [ 2925.195726] do_el0_svc+0x28/0x88 [ 2925.199045] el0_svc+0x20/0x30 [ 2925.202104] el0_sync_handler+0xa8/0xb0 [ 2925.205942] el0_sync+0x148/0x180 [ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660) [ 2925.215372] ---[ end trace 124254d8e485a58b ]--- [ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2925.227676] Kernel Offset: disabled [ 2925.231164] CPU features: 0x00001001,20000846 [ 2925.235521] Memory Limit: none [ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 5ff90af9 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically") Cc: Jack Pham <jackp@codeaurora.org> Tested-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20210608105656.10795-1-peter.chen@kernel.orgSigned-off-by:
-
- 04 Jun, 2021 5 commits
-
-
Alan Stern authored
This patch adds a udc_async_callbacks handler to the net2272 UDC driver, which will prevent a theoretical race during gadget unbinding. The net2272 driver is sufficiently complicated that I didn't want to mess around with IRQ settings. Instead, the patch simply adds a new flag to control async callbacks, and checks the flag before issuing any of them. Acked-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch adds a udc_async_callbacks handler to the net2280 UDC driver, which will prevent a theoretical race during gadget unbinding. The net2280 driver is sufficiently complicated that I didn't want to mess around with IRQ settings. Instead, the patch simply adds a new flag to control async callbacks, and checks the flag before issuing any of them. Acked-by:
-
Alan Stern authored
This patch adds a udc_async_callbacks handler to the dummy-hcd UDC driver, which will prevent a theoretical race during gadget unbinding. The implementation is simple, since dummy-hcd already has a flag to keep track of whether emulated IRQs are enabled. All the handler has to do is store the enable value in the flag, and avoid setting the flag prematurely. Acked-by:
-
Alan Stern authored
The Gadget API has a theoretical race when a gadget driver is unbound. Although the pull-up is turned off before the driver's ->unbind callback runs, if the USB cable were to be unplugged at just the wrong moment there would be nothing to prevent the UDC driver from invoking the ->disconnect callback after the unbind has finished. In theory, other asynchronous callbacks could also happen during the time before the UDC driver's udc_stop routine is called, and the gadget driver would not be prepared to handle any of them. We need a way to tell UDC drivers to stop issuing asynchronous (that is, ->suspend, ->resume, ->disconnect, ->reset, or ->setup) callbacks at some point after the pull-up has been turned off and before the ->unbind callback runs. This patch adds a new ->udc_async_callbacks callback to the usb_gadget_ops structure for precisely this purpose, and it adds the corresponding support to the UDC core. Later patches in this series add support for udc_async_callbacks to several UDC drivers. Acked-by:
-
Aswath Govindraju authored
In the driver the interrupts are fetched by name. Therefore, add interrupt names in the list of required properties Fixes: 68989fe1 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema") Signed-off-by:
Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210528060657.29100-1-a-govindraju@ti.comSigned-off-by:
-
- 03 Jun, 2021 8 commits
-
-
Azhar Shaikh authored
Intel AlderLake(ADL) IOM has a different IOM port status offset than Intel TigerLake. Add a new ACPI ID for ADL and use the IOM port status offset as per the platform. Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Azhar Shaikh <azhar.shaikh@intel.com> Link: https://lore.kernel.org/r/20210601035843.71150-1-azhar.shaikh@intel.comSigned-off-by:
-
Grzegorz Jaszczyk authored
The USB charger type and status was already propagated to userspace through kobject_uevent_env during charger notify work. Nevertheless the uevent could be lost e.g. because it could be fired at an early kernel boot stage, way before udev daemon or any other user-space app was able to catch it. Registering uevent hook for introduced usb_phy_dev_type will allow to query sysfs 'uevent' file to restore that information at any time. Reviewed-by:
Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Link: https://lore.kernel.org/r/20210531122222.453628-1-grzegorz.jaszczyk@linaro.orgSigned-off-by:
-
Geert Uytterhoeven authored
Correct the order of the descriptions for the "interrupts" property to match the order of the "interrupt-names" property. Fixes: 68989fe1 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema") Acked-by:
Peter Chen <peter.chen@nxp.com> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20210527193952.1705127-1-geert@linux-m68k.orgSigned-off-by:
-
Chunfeng Yun authored
When use manual drd switch, extcon is not used in fact, so no need get it even it exists, just skip it like using role switch. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-5-git-send-email-chunfeng.yun@mediatek.comSigned-off-by:
-
Chunfeng Yun authored
Print an error log when the error number is not -EPROBE_DEFER Signed-off-by:
-
Chunfeng Yun authored
Add a SSUSB_IP_PW_STS1 register to show ip sleep status Signed-off-by:
-
Chunfeng Yun authored
mtu3_gadget_start() will set speed, no need set it again in mtu3_gadget_set_speed(), just save the desired speed. Signed-off-by:
-
Chunfeng Yun authored
It's defined and only used in the same file, so remove its declaration in mtu3.h, and make it static Signed-off-by:
-
- 02 Jun, 2021 3 commits
-
-
Jack Pham authored
The DWC3 DebugFS directory and files are currently created once during probe. This includes creation of subdirectories for each of the gadget's endpoints. This works fine for peripheral-only controllers, as dwc3_core_init_mode() calls dwc3_gadget_init() just prior to calling dwc3_debugfs_init(). However, for dual-role controllers, dwc3_core_init_mode() will instead call dwc3_drd_init() which is problematic in a few ways. First, the initial state must be determined, then dwc3_set_mode() will have to schedule drd_work and by then dwc3_debugfs_init() could have already been invoked. Even if the initial mode is peripheral, dwc3_gadget_init() happens after the DebugFS files are created, and worse so if the initial state is host and the controller switches to peripheral much later. And secondly, even if the gadget endpoints' debug entries were successfully created, if the controller exits peripheral mode, its dwc3_eps are freed so the debug files would now hold stale references. So it is best if the DebugFS endpoint entries are created and removed dynamically at the same time the underlying dwc3_eps are. Do this by calling dwc3_debugfs_create_endpoint_dir() as each endpoint is created, and conversely remove the DebugFS entry when the endpoint is freed. Fixes: 41ce1456 ("usb: dwc3: core: make dwc3_set_mode() work properly") Reviewed-by:
-
Greg Kroah-Hartman authored
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20210527101426.3283214-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Heikki Krogerus authored
This reverts commit acad3e9c. The device property that can be used to identify the device class/type of the remote port parent when device graph is used is always needed after all. Without it there is no real way to know is the requested connection actually described in the device graph or not. If the connection is described in the device graph but the device instance is still missing for what ever reason, the code defers probe for now. Adding a comment to the code to explain this. Reviewed-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
-
- 31 May, 2021 1 commit
-
-
Greg Kroah-Hartman authored
We need the usb/thunderbolt fixes in here as well. Signed-off-by:
-
- 30 May, 2021 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "This is a bit larger than usual at rc4 time. The reason is due to Lee's work of fixing newly reported build warnings. The rest is fixes as usual" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits) MAINTAINERS: adjust to removing i2c designware platform data i2c: s3c2410: fix possible NULL pointer deref on read message after write i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset i2c: i801: Don't generate an interrupt on bus reset i2c: mpc: implement erratum A-004447 workaround powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name i2c: busses: i2c-st: Fix copy/paste function misnaming issues i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure i2c: busses: i2c-ocores: Place the expected function names into the documentation headers i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()' i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode' i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout' i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E i2c: I2C_HISI should depend on ACPI ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull seccomp fixes from Kees Cook: "This fixes a hard-to-hit race condition in the addfd user_notif feature of seccomp, visible since v5.9. And a small documentation fix" * tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Refactor notification handler to prepare for new semantics Documentation: seccomp: Fix user notification documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "A handful of RISC-V related fixes: - avoid errors when the stack tracing code is tracing itself. - resurrect the memtest= kernel command line argument on RISC-V, which was briefly enabled during the merge window before a refactoring disabled it. - build fix and some warning cleanups" * tag 'riscv-for-linus-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: kexec: Fix W=1 build warnings riscv: kprobes: Fix build error when MMU=n riscv: Select ARCH_USE_MEMTEST riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "This week's pile mitigates some decades-old problems in how extent size hints interact with realtime volumes, fixes some failures in online shrink, and fixes a problem where directory and symlink shrinking on extremely fragmented filesystems could fail. The most user-notable change here is to point users at our (new) IRC channel on OFTC. Freedom isn't free, it costs folks like you and me; and if you don't kowtow, they'll expel everyone and take over your channel. (Ok, ok, that didn't fit the song lyrics...) Summary: - Fix a bug where unmapping operations end earlier than expected, which can cause chaos on multi-block directory and symlink shrink operations. - Fix an erroneous assert that can trigger if we try to transition a bmap structure from btree format to extents format with zero extents. This was exposed by xfs/538" * tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: bunmapi has unnecessary AG lock ordering issues xfs: btree format inode forks can have zero extents xfs: add new IRC channel to MAINTAINERS xfs: validate extsz hints against rt extent size when rtinherit is set xfs: standardize extent size hint validation xfs: check free AG space when making per-AG reservations
-
- 29 May, 2021 12 commits
-
-
Sargun Dhillon authored
This refactors the user notification code to have a do / while loop around the completion condition. This has a small change in semantic, in that previously we ignored addfd calls upon wakeup if the notification had been responded to, but instead with the new change we check for an outstanding addfd calls prior to returning to userspace. Rodrigo Campos also identified a bug that can result in addfd causing an early return, when the supervisor didn't actually handle the syscall [1]. [1]: https://lore.kernel.org/lkml/20210413160151.3301-1-rodrigo@kinvolk.io/ Fixes: 7cf97b12 ("seccomp: Introduce addfd ioctl to seccomp user notifier") Signed-off-by:
Sargun Dhillon <sargun@sargun.me> Acked-by:
Tycho Andersen <tycho@tycho.pizza> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
Rodrigo Campos <rodrigo@kinvolk.io> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210517193908.3113-3-sargun@sargun.me
-
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linuxLinus Torvalds authored
Pull thermal fixes from Daniel Lezcano: - Fix uninitialized error code value for the SPMI adc driver (Yang Yingliang) - Fix kernel doc warning (Yang Li) - Fix wrong read-write thermal trip point initialization (Srinivas Pandruvada) * tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data() thermal/ti-soc-thermal: Fix kernel-doc thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some tiny char/misc driver fixes for 5.13-rc4. Nothing huge here, just some tiny fixes for reported issues: - two interconnect driver fixes - kgdb build warning fix for gcc-11 - hgafb regression fix - soundwire driver fix - mei driver fix All have been in linux-next with no reported issues" * tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: request autosuspend after sending rx flow control kgdb: fix gcc-11 warnings harder video: hgafb: correctly handle card detect failure during probe soundwire: qcom: fix handling of qcom,ports-block-pack-mode interconnect: qcom: Add missing MODULE_DEVICE_TABLE interconnect: qcom: bcm-voter: add a missing of_node_put()
-
Linus Torvalds authored
Merge tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three small driver core / debugfs fixes for 5.13-rc4: - debugfs fix for incorrect "lockdown" mode for selinux accesses - two device link changes, one bugfix and one cleanup All of these have been in linux-next for over a week with no reported problems" * tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: base: Reduce device link removal code duplication drivers: base: Fix device link removal debugfs: fix security_locked_down() call for SELinux
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO driver fixes from Greg KH: "Here are some small IIO and staging driver fixes for reported issues for 5.13-rc4. Nothing major here, tiny changes for reported problems, full details are in the shortlog if people are curious. All have been in linux-next for a while with no reported problems" * tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: ad7793: Add missing error code in ad7793_setup() iio: adc: ad7923: Fix undersized rx buffer. iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp() iio: dac: ad5770r: Put fwnode in error case during ->probe() iio: gyro: fxas21002c: balance runtime power in error path staging: emxx_udc: fix loop in _nbu2ss_nuke() staging: iio: cdc: ad7746: avoid overwrite of num_channels iio: adc: ad7192: handle regulator voltage error first iio: adc: ad7192: Avoid disabling a clock that was never enabled. iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial driver fixes from Greg KH: "Here are some small fixes for reported problems for tty and serial drivers for 5.13-rc4. They consist of: - 8250 bugfixes and new device support - lockdown security mode fixup - syzbot found problems fixed - 8250_omap fix for interrupt storm - revert of 8250_omap driver fix as it caused worse problem than the original issue All but the last patch have been in linux-next for a while, the last one is a revert of a problem found in linux-next with the 8250_omap driver change" * tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: 8250_omap: Fix possible interrupt storm" serial: 8250_pci: handle FL_NOIRQ board flag serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait' serial: 8250_pci: Add support for new HPE serial device serial: 8250: 8250_omap: Fix possible interrupt storm serial: 8250: Use BIT(x) for UART_{CAP,BUG}_* serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART serial: 8250_dw: Add device HID for new AMD UART controller serial: sh-sci: Fix off-by-one error in FIFO threshold register setting serial: core: fix suspicious security_locked_down() call serial: tegra: Fix a mask operation that is always true -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of tiny USB and Thunderbolt driver fixes for 5.13-rc4. They consist of: - thunderbolt fixes for some NVM bound issues - xhci fixes for reported problems - control-request fixups - documentation build warning fixes - new usb-serial driver device ids - typec bugfixes for reported issues - usbfs warning fixups (could be triggered from userspace) - other tiny fixes for reported problems. All of these have been in linux-next with no reported issues" * tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall xhci: fix giving back URB with incorrect status regression in 5.12 usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen() usb: typec: tcpm: Respond Not_Supported if no snk_vdo usb: typec: tcpm: Properly interrupt VDM AMS USB: trancevibrator: fix control-request direction usb: Restore the usb_header label usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header usb: typec: ucsi: Clear pending after acking connector change usb: typec: mux: Fix matching with typec_altmode_desc misc/uss720: fix memory leak in uss720_probe usb: dwc3: gadget: Properly track pending and queued SG USB: usbfs: Don't WARN about excessively large memory allocations thunderbolt: usb4: Fix NVM read buffer bounds and offset issue thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue usb: chipidea: udc: assign interrupt number to USB gadget structure usb: cdnsp: Fix lack of removing request from pending list. usb: cdns3: Fix runtime PM imbalance on error USB: serial: pl2303: add device id for ADLINK ND-6530 GC USB: serial: ti_usb_3410_5052: add startech.com device id ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "ARM fixes: - Another state update on exit to userspace fix - Prevent the creation of mixed 32/64 VMs - Fix regression with irqbypass not restarting the guest on failed connect - Fix regression with debug register decoding resulting in overlapping access - Commit exception state on exit to usrspace - Fix the MMU notifier return values - Add missing 'static' qualifiers in the new host stage-2 code x86 fixes: - fix guest missed wakeup with assigned devices - fix WARN reported by syzkaller - do not use BIT() in UAPI headers - make the kvm_amd.avic parameter bool PPC fixes: - make halt polling heuristics consistent with other architectures selftests: - various fixes - new performance selftest memslot_perf_test - test UFFD minor faults in demand_paging_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits) selftests: kvm: fix overlapping addresses in memslot_perf_test KVM: X86: Kill off ctxt->ud KVM: X86: Fix warning caused by stale emulation context KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception KVM: x86/mmu: Fix comment mentioning skip_4k KVM: VMX: update vcpu posted-interrupt descriptor when assigning device KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK KVM: x86: add start_assignment hook to kvm_x86_ops KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch selftests: kvm: do only 1 memslot_perf_test run by default KVM: X86: Use _BITUL() macro in UAPI headers KVM: selftests: add shared hugetlbfs backing source type KVM: selftests: allow using UFFD minor faults for demand paging KVM: selftests: create alias mappings when using shared memory KVM: selftests: add shmem backing source type KVM: selftests: refactor vm_mem_backing_src_type flags KVM: selftests: allow different backing source types KVM: selftests: compute correct demand paging size KVM: selftests: simplify setup_demand_paging error handling KVM: selftests: Print a message if /dev/kvm is missing ... -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: "Fix races in vfio-ccw request handling" * tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: vfio-ccw: Serialize FSM IDLE state with I/O completion vfio-ccw: Reset FSM state to IDLE inside FSM vfio-ccw: Check initialized flag in cp_init()
-
Paolo Bonzini authored
vm_create allocates memory and maps it close to GPA. This memory is separate from what is allocated in subsequent calls to vm_userspace_mem_region_add, so it is incorrect to pass the test memory size to vm_create_default. Just pass a small fixed amount of memory which can be used later for page table, otherwise GPAs are already allocated at MEM_GPA and the test aborts. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Ten small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq scsi: vmw_pvscsi: Set correct residual data length scsi: bnx2fc: Return failure if io_req is already in ABTS processing scsi: aic7xxx: Remove multiple definition of globals scsi: aic7xxx: Restore several defines for aic7xxx firmware build scsi: target: iblock: Fix smp_processor_id() BUG messages scsi: libsas: Use _safe() loop in sas_resume_port() scsi: target: tcmu: Fix xarray RCU warning scsi: target: core: Avoid smp_processor_id() in preemptible code
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request (Christoph): - fix a memory leak in nvme_cdev_add (Guoqing Jiang) - fix inline data size comparison in nvmet_tcp_queue_response (Hou Pu) - fix false keep-alive timeout when a controller is torn down (Sagi Grimberg) - fix a nvme-tcp Kconfig dependency (Sagi Grimberg) - short-circuit reconnect retries for FC (Hannes Reinecke) - decode host pathing error for connect (Hannes Reinecke) - MD pull request (Song): - Fix incorrect chunk boundary assert (Christoph) - Fix s390/dasd verification panic (Stefan) * tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block: nvmet: fix false keep-alive timeout when a controller is torn down nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME md/raid5: remove an incorrect assert in in_chunk_boundary s390/dasd: add missing discipline function nvme-fabrics: decode host pathing error for connect nvme-fc: short-circuit reconnect retries nvme: fix potential memory leaks in nvme_cdev_add
-
