Since we now get_user_pages() outside of the mutex prior to performing
the copy, we kmap() the page inside the copy routine and so need to
perform an ordinary memcpy() and not copy_from_user().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

As we do not have a requirement to be atomic and avoid sleeping whilst
performing the slow copy for shmem based pread and pwrite, we can use
kmap instead, thus simplifying the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

We can avoid an early clflush when pwriting if we use the current CPU
write domain rather than moving the object to the GTT domain for the
purposes of the pwrite. This has the advantage of not flushing the
presumably hot data that we want to upload into the bo, and of ascribing
the clflush to the execution when profiling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

The callers expect us to cleanup any partially initialised structures
before reporting the error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

If the object is bigger than the entire aperture, reject it early
before evicting everything in a vain attempt to find space.

v2: Use E2BIG as suggested by Owain G. Ainsworth.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

This particular warning is harmless as we emit during the normal
pinning process where the batch buffer requires more fences than is
available without eviction. Only if we fail to evict enough fences does
this become a problem, so include the requested number of fences in the
ultimate *error* message.

v2: Remember to compile test even trial patches to remove warnings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Whilst pinning the buffer, check that that its current alignment
matches the requested alignment. If it does not, rebind.

This should clear up any final render errors whilst resuming,
for reference:

  Bug 27070 - [i915] Page table errors with empty ringbuffer
  https://bugs.freedesktop.org/show_bug.cgi?id=27070

  Bug 15502 -  render error detected, EIR: 0x00000010
  https://bugzilla.kernel.org/show_bug.cgi?id=15502

  Bug 13844 -  i915 error: "render error detected"
  https://bugzilla.kernel.org/show_bug.cgi?id=13844Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>

Add the pitch that we about to write into the control register along
with the base, offset and coordinates that go into the other control
registers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

If the FBC is already disabled, then we do not even attempt to disable
FBC and so there is no point emitting a debug statement at that point,
having already emitted one saying why we are disabling FBC.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

Nesting domain changes will cause confusion when trying to interpret the
tracepoints describing the sequence of changes for the object, as well
as obscuring the order of operations for the reader of the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Delay taking the mutex until we need to and ensure that we hold the
spinlock when resetting unpin_work on the error path. Also defer the
debugging print messages until after we have released the spinlock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

Only report an error if the GPU has actually detected one, otherwise we
are just hung.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Fixes /debug/dri/0/i915_gem_interrupt output for status page.
Signed-off-by: Eric Anholt <eric@anholt.net>

Pineview with DDR3 memory has different latencies to enable CxSR.
This patch updates CxSR latency table to add Pineview DDR3 latency
configuration. It also adds one flag "is_ddr3" for checking DDR3
setting in MCHBAR.

Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Peng <peng.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

The "encoder" variable can never be null because it is used as loop
cursor in a list_for_each_entry() loop.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

The "connector" variable is used as the cursor in a
list_for_each_entry() and it's always non-null so we don't need to check
it.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

For real HDMI sink, CPT HDMI port has to set 'HDMI' mode flag
in order to make HDMI audio work correctly.

This is required patch for drm/i915 to enable HDMI audio on CPT PCH,
ALSA patch is at http://mailman.alsa-project.org/pipermail/alsa-devel/2010-May/027601.htmlTested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

This saves a whooping 7 dwords. Zero functional changes. Because
some of the refcounts are rather tightly calculated, I've put
BUG_ONs in the code to check for overflows.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

DisplayPort spec v1.1a, Table 2-52.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

We can, by virtue of a vblank interrupt firing in the middle of setting
up the unpin work (i.e. after we set the unpin_work field and before we
write to the ringbuffer) enter intel_finish_page_flip() prior to
receiving the pending flip notification. Therefore we can expect to hit
intel_finish_page_flip() under normal circumstances without a pending flip
and even without installing the pending_flip_obj. This is exacerbated by
aperture thrashing whilst binding the framebuffer

References:

  Bug 28079 - "glresize" causes kernel panic in intel_finish_page_flip.
  https://bugs.freedesktop.org/show_bug.cgi?id=28079Reported-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

References:

  Bug 15733 - Crash when accessing nonexistent GTT entries in i915
  https://bugzilla.kernel.org/show_bug.cgi?id=15733

On G33 and above, the size of the GTT space is determined by the GMCH
control register. Prior to this revision, the size is determined by the
size of the aperture. So we must careful to map and fill the appropriate
range depending on chipset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>

Add power monitoring support to the i915 driver for use by the IPS
driver.  Export the available power info to the IPS driver through a few
new inter-driver hooks.  When used together, the IPS driver and this
patch can significantly increase graphics performance on Ironlake class
chips.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Fixed 32-bit compile.  stupid obfuscating div_u64()]
Signed-off-by: Eric Anholt <eric@anholt.net>

Disable the CRT plug interrupt while doing the force cycle, explicitly
clear any CRT interrupt we may have generated, and restore when done.
Should mitigate interrupt storms from hotplug detection.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

This doesn't change the clock limits (minimums), i.e. it won't make it
output 720x576 PAL nor 720x480 NTSC, but it will work with modes like
1080i etc. (including GLX and textured Xvideo, not sure about the
overlay).

Tested on i915 + analog VGA, it would be worth checking if newer chips
(and which ones) still support interlaced mode.
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Eric Anholt <eric@anholt.net>

While investigating Intel i5 Arrandale GPU lockups with -rc4, I
noticed a lock imbalance.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Convert i915_gem_object_clflush to DEFINE_EVENT, and save ~0.5K:

   text    data     bss     dec     hex filename
  13204    2732      12   15948    3e4c i915_trace_points.o.orig
  12668    2732      12   15412    3c34 i915_trace_points.o

No change in functionality.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

FBC disable on 965 can take long enough to trigger latency checks in the
kernel so be sure to timeout after a reasonable period.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15015.
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

The BSD (bit stream decoder) ring is used for accessing the BSD engine
which decodes video bitstream for H.264 and VC1 on G45+.  It is
asynchronous with the render ring and has access to separate parts of
the GPU from it, though the render cache is coherent between the two.
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

The active list and request list move into the ringbuffer structure,
so each can track its active objects in the order they are in that
ring.  The flushing list does not, as it doesn't matter which ring
caused data to end up in the render cache.  Objects gain a pointer to
the ring they are active on (if any).
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Introduces a more complete intel_ring_buffer structure with callbacks
for setup and management of a particular ringbuffer, and converts the
render ring buffer consumers to use it.
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Xiang Hai hao <haihao.xiang@intel.com>
[anholt: Fixed up whitespace fail and rebased against prep patches]
Signed-off-by: Eric Anholt <eric@anholt.net>

With the advent of the BSD ring, be clear about which ring this is.
The docs are pretty consistent with calling this the Render engine at
this point.

This is preparation for supporting multiple ringbuffers on Ironlake.
The non-copy-and-paste changes are:
- de-staticing functions
- I915_GEM_GPU_DOMAINS moving to i915_drv.h to be used by both files.
- i915_gem_add_request had only half its implementation
  copy-and-pasted out of the middle of it.

The i915's implementation of KMS requires GEM in order to manage the
memory and execution domains of the framebuffer and associated
resources. By the point at which we detect broken a BIOS and need to
disable GEM, we have already registered ourselves as a KMS driver with
several subsystems. Rather than introducing a fragile unwind and attempt
to continue with UMS, spit out an error and unload the driver.

References:

  [Bug 15754] IP: [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
              BUG: unable to handle kernel NULL pointer dereference at (null)
  https://bugzilla.kernel.org/show_bug.cgi?id=15754

[drm:i915_driver_load] *ERROR* Detected broken video BIOS with
262140/262144kB of video memory stolen.
[drm:i915_driver_load] *ERROR* Disabling GEM. (try reducing stolen
memory or updating the BIOS to fix).
i915 0000:00:02.0: irq 30 for MSI/MSI-X
[drm] set up 255M of stolen space
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
PGD 69719067 PUD 69dda067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/module/snd_seq_oss/initstate
CPU 1
Pid: 867, comm: modprobe Not tainted 2.6.33-ARCH #1 G43Twins-FullHD/To
Be Filled By O.E.M.
RIP: 0010:[<ffffffffa0207589>]  [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
RSP: 0018:ffff8800699f3af8  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffffffffff RCX: 0000000000000000
RDX: 0000000000001000 RSI: 0000000000001000 RDI: ffff8800693d0f78
RBP: ffff8800699f3b18 R08: 0000000000001000 R09: 0000000000000000
R10: 2222222222222222 R11: 0000000000000000 R12: ffff880068de70c0
R13: 0000000000001000 R14: 0000000000000000 R15: ffff8800689cb000
FS:  00007fa93f4e5700(0000) GS:ffff880001880000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000695a0000 CR4: 00000000000406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 867, threadinfo ffff8800699f2000, task ffff8800694f4740)
Stack:
 ffff880068de73c0 ffff880068de70c0 ffff8800689cb000 0000000000001000
<0> ffff8800699f3b68 ffffffffa0299f63 ffff8800693d0f78 0000120068de70c0
<0> ffff8800689cb000 ffff880068de73c0 ffff880068de70c0 ffff8800689cb000
Call Trace:
 [<ffffffffa0299f63>] i915_gem_object_bind_to_gtt+0x83/0x360 [i915]
 [<ffffffffa029a2e5>] i915_gem_object_pin+0xa5/0xb0 [i915]
 [<ffffffffa029a3c5>] i915_gem_init_ringbuffer+0xd5/0x510 [i915]
 [<ffffffffa028dbee>] i915_driver_load+0x4ce/0xd00 [i915]
 [<ffffffffa0205d37>] ? drm_sysfs_device_add+0x87/0xb0 [drm]
 [<ffffffffa0203363>] ? drm_get_minor+0x1d3/0x330 [drm]
 [<ffffffffa02037e6>] drm_get_dev+0x326/0x580 [drm]
 [<ffffffffa02bc0a5>] i915_pci_probe+0x10/0xd0 [i915]
 [<ffffffff811e98a2>] local_pci_probe+0x12/0x20
 [<ffffffff811ea8e0>] pci_device_probe+0x80/0xb0
 [<ffffffff8127b12a>] ? driver_sysfs_add+0x5a/0x90
 [<ffffffff8127b273>] driver_probe_device+0x93/0x1a0
 [<ffffffff8127b413>] __driver_attach+0x93/0xa0
 [<ffffffff8127b380>] ? __driver_attach+0x0/0xa0
 [<ffffffff8127a8f8>] bus_for_each_dev+0x68/0x90
 [<ffffffff8127b0c9>] driver_attach+0x19/0x20
 [<ffffffff8127a0ad>] bus_add_driver+0xcd/0x2d0
 [<ffffffff8127b718>] driver_register+0x78/0x140
 [<ffffffff811eab91>] __pci_register_driver+0x51/0xd0
 [<ffffffffa02d6000>] ? i915_init+0x0/0x52 [i915]
 [<ffffffffa01fdc31>] drm_init+0x111/0x120 [drm]
 [<ffffffff810eb0cd>] ? register_shrinker+0x4d/0x60
 [<ffffffffa02d6000>] ? i915_init+0x0/0x52 [i915]
 [<ffffffffa02d6050>] i915_init+0x50/0x52 [i915]
 [<ffffffff81002047>] do_one_initcall+0x37/0x1a0
 [<ffffffff8108ed17>] sys_init_module+0xd7/0x250
 [<ffffffff81009fc2>] system_call_fastpath+0x16/0x1b
Code: eb 29 49 8b 41 28 31 d2 49 f7 f5 85 d2 74 39 44 89 c0 29 d0 48 89 c2 48 01 f2 49 39 d2 73 29 0f 1f 00 49 89 da 4c 89 d3 4d 89 d9 <4d> 8b 19 49 39 f9 41 0f 18 0b 74 2b 4d 8b 51 30 4d 89 cc 49 39
RIP  [<ffffffffa0207589>] drm_mm_search_free+0x49/0x90 [drm]
 RSP <ffff8800699f3af8>
CR2: 0000000000000000
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  squashfs: update documentation to include description of xattr layout
  squashfs: fix name reading in squashfs_xattr_get
  squashfs: constify xattr handlers
  squashfs: xattr fix sparse warnings
  squashfs: xattr_lookup sparse fix
  squashfs: add xattr support configure option
  squashfs: add new extended inode types
  squashfs: add support for xattr reading
  squashfs: add xattr id support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: roccat: fix build failure if built as module
  HID: roccat: propagate special events of roccat hardware to userspace
  HID: Add the GYR4101US USB ID to hid-gyration
  HID: fix hid-roccat-kone for bin_attr API change

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: emu10k1: allow high-resolution mixer controls
  ALSA: pcm: fix delta calculation at boundary wraparound
  ALSA: hda_intel: fix handling of non-completion stream interrupts
  ALSA: usb/caiaq: fix Traktor Kontrol X1 ABS_HAT2X axis
  ALSA: hda: Fix model quirk for Dell M1730
  ALSA: hda - iMac9,1 sound fixes
  ALSA: hda: Use LPIB for Toshiba A100-259
  ALSA: hda: Use LPIB for Acer Aspire 5110
  ALSA: aw2-alsa.c: use pci_ids.h defines and fix checkpatch.pl noise
  ALSA: usb-audio: add support for Akai MPD16
  ALSA: pcm: fix the fix of the runtime->boundary calculation