The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e5904747 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.

Fixes: e5904747 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.

The U8500 has also gained a few systems using touchscreens from
Cypress, Melfas and Zinitix so add these at the same time as
we're updating the defconfig anyway.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: phone-devel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: newbyte@disroot.org
Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This updates the Versatile Express defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- CONFIG_CMA options were moved around.
- CONFIG_MODULES options were moved around.
- CONFIG_CRYPTO_HW was moved around.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210713133708.94397-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This updates the Versatile defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
  framebuffer emulation as DRM does.
- The Acorn fonts are removed, the default framebuffer font
  works fine. I don't know why this was selected in the first
  place or how the Kconfig was altered so it was removed.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714081819.139210-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This updates the RealView defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
  framebuffer emulation as DRM does.
- Drop two unused penguin logos.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714090040.182381-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This updates the Integrator defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- Drop the unused Matrox FB drivers that are only used with
  specific PCI cards.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714122703.212609-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

ARM SCMI fixes for v5.14

A small set of fixes:
- adding check for presence of probe while registering the driver to
  prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fix for possible scmi_linux_errmap buffer overflow
- fix to avoid sensor message structure padding
- fix the range check for the maximum number of pending SCMI messages
- fix for various kernel-doc warnings

* tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Fix range check for the maximum number of pending messages
  firmware: arm_scmi: Avoid padding in sensor message structure
  firmware: arm_scmi: Fix kernel doc warnings about return values
  firmware: arm_scpi: Fix kernel doc warnings
  firmware: arm_scmi: Fix kernel doc warnings
  firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
  firmware: arm_scmi: Ensure drivers provide a probe function
  firmware: arm_scmi: Simplify device probe function on the bus

Link: https://lore.kernel.org/r/20210714165831.2617437-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

Arm FF-A fixes for v5.14

A small set of fixes:
- adding check for presence of probe while registering the driver to
  prevent NULL pointer access
- dropping the duplicate check as the driver core already takes care of it
- fixing possible ffa_linux_errmap buffer overflow and
- fixing kernel-doc warning for comment style

* tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
  firmware: arm_ffa: Fix the comment style
  firmware: arm_ffa: Simplify probe function
  firmware: arm_ffa: Ensure drivers provide a probe function

Link: https://lore.kernel.org/r/20210714165806.2617325-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Kconfig symbol PCI_IXP4XX_LEGACY does not exist, but IXP4XX_PCI_LEGACY
does.

Fixes: d5d9f7ac ("ARM/ixp4xx: Make NEED_MACH_IO_H optional")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/82ce37c617293521f095a945a255456b9512769c.1626255077.git.geert+renesas@glider.be'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.14-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes

arm64: tegra: Device tree fixes for v5.14-rc1

This contains two late fixes for Tegra194 device tree files to restore
USB and audio functionality after enabling system-wide IOMMU support.

* tag 'tegra-for-5.14-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Enable SMMU support for USB on Tegra194
  arm64: tegra: Enable audio IOMMU support on Tegra194

Link: https://lore.kernel.org/r/20210709150220.2543875-1-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-fixes-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes

Renesas fixes for v5.14

  - Fix a clock/reset handling design issue on the new RZ/G2L SoC,
    requiring an atomic change to DT binding definitions, clock driver,
    and DTS,
  - Restore graphical consoles in the shmobile_defconfig.

* tag 'renesas-fixes-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: defconfig: Restore graphical consoles
  dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions
  clk: renesas: r9a07g044: Add P2 Clock support
  clk: renesas: r9a07g044: Fix P1 Clock
  clk: renesas: r9a07g044: Rename divider table
  clk: renesas: rzg2l: Add multi clock PM support

Link: https://lore.kernel.org/r/cover.1626253929.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes

Memory controller drivers for v5.14 - Tegra SoC, late fixes

Two fixes for recent series of changes in Tegra SoC memory controller
drivers:
1. Add a stub for tegra_mc_probe_device() to fix compile testing of
   arm-smmu without TEGRA_MC.
2. Fix arm-smmu dtschema syntax.

* tag 'memory-controller-drv-tegra-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  dt-bindings: arm-smmu: Fix json-schema syntax
  memory: tegra: Add compile-test stub for tegra_mc_probe_device()

Link: https://lore.kernel.org/r/20210625073604.13562-1-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

SCMI message headers carry a sequence number and such field is sized to
allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an
acceptable maximum number of pending in-flight messages.

Fix accordingly the checks performed on the value exported by transports
in scmi_desc.max_msg

Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.comReported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: updated the patch title and error message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

scmi_resp_sensor_reading_complete structure is meant to represent an
SCMI asynchronous reading complete message. The readings field with
a 64bit type forces padding and breaks reads in scmi_sensor_reading_get.

Split it in two adjacent 32bit readings_low/high subfields to avoid the
padding within the structure. Alternatively we could to mark the structure
packed.

Link: https://lore.kernel.org/r/20210628170042.34105-1-cristian.marussi@arm.com
Fixes: e2083d36 ("firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Kernel doc validation script still complains about the following:

|No description found for return value of 'scmi_get_protocol_device'
|No description found for return value of 'scmi_devm_notifier_register'
|No description found for return value of 'scmi_devm_notifier_unregister'

Fix adding missing Return kernel-doc statements.

Link: https://lore.kernel.org/r/20210712143504.33541-1-cristian.marussi@arm.comSigned-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Kernel doc validation script is unhappy and complains with the below set
of warnings.

 | Function parameter or member 'device_domain_id' not described in 'scpi_ops'
 | Function parameter or member 'get_transition_latency' not described in 'scpi_ops'
 | Function parameter or member 'add_opps_to_device' not described in 'scpi_ops'
 | Function parameter or member 'sensor_get_capability' not described in 'scpi_ops'
 | Function parameter or member 'sensor_get_info' not described in 'scpi_ops'
 | Function parameter or member 'sensor_get_value' not described in 'scpi_ops'
 | Function parameter or member 'device_get_power_state' not described in 'scpi_ops'
 | Function parameter or member 'device_set_power_state' not described in 'scpi_ops'

Fix them adding appropriate documents or missing keywords.

Link: https://lore.kernel.org/r/20210712130801.2436492-1-sudeep.holla@arm.comReviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Kernel doc validation script is unhappy and complains with the below set
of warnings.

 | Function parameter or member 'fast_switch_possible' not described in 'scmi_perf_proto_ops'
 | Function parameter or member 'power_scale_mw_get' not described in 'scmi_perf_proto_ops'
 | cannot understand function prototype: 'struct scmi_sensor_reading '
 | cannot understand function prototype: 'struct scmi_range_attrs '
 | cannot understand function prototype: 'struct scmi_sensor_axis_info '
 | cannot understand function prototype: 'struct scmi_sensor_intervals_info '

Fix them adding appropriate documents or missing keywords.

Link: https://lore.kernel.org/r/20210712130801.2436492-2-sudeep.holla@arm.comReviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

As of commit f611b1e7 ("drm: Avoid circular dependencies for
CONFIG_FB"), CONFIG_FB is no longer auto-enabled.  While CONFIG_FB may
be considered unneeded for systems where graphics is provided by a DRM
driver, R-Mobile A1 still relies on a frame buffer device driver for
graphics support.

Restore support for graphics on R-Mobile A1 and graphical consoles on
DRM-based systems by explicitly enabling CONFIG_FB in the defconfig for
Renesas ARM systems.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4474be1d2c00c6ca97c2714844ea416a9ea9a9.1626084948.git.geert+renesas@glider.be

The ffa_linux_errmap buffer access index is supposed to range from 0-8
but it ranges from 1-9 instead. It reads one element out of bounds. It
also changes the success into -EINVAL though ffa_to_linux_errno is never
used in case of success, it is expected to work for success case too.

It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.

Link: https://lore.kernel.org/r/20210707134739.1869481-1-sudeep.holla@arm.comReported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

clang produces the following warning:

    drivers/firmware/arm_ffa/driver.c:123: warning: expecting
    prototype for FF(). Prototype was for FFA_PAGE_SIZE() instead

    This comment starts with '/**', but isn't a kernel-doc comment.
    Refer Documentation/doc-guide/kernel-doc.rst

Fix the same by removing the kernel-doc style comment here.

Link: https://lore.kernel.org/r/20210622162202.3485866-1-sudeep.holla@arm.comReported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

When the driver core calls the probe callback it already checked that
the devices match, so there is no need to call the match callback again.

Link: https://lore.kernel.org/r/20210621201652.127611-2-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The bus probe callback calls the driver callback without further
checking. Better be safe than sorry and refuse registration of a driver
without a probe function to prevent a NULL pointer exception.

Link: https://lore.kernel.org/r/20210621201652.127611-1-u.kleine-koenig@pengutronix.de
Fixes: e7818584 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The scmi_linux_errmap buffer access index is supposed to depend on the
array size to prevent element out of bounds access. It uses SCMI_ERR_MAX
to check bounds but that can mismatch with the array size. It also
changes the success into -EIO though scmi_linux_errmap is never used in
case of success, it is expected to work for success case too.

It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.

Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.comReported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The bus probe callback calls the driver callback without further
checking. Better be safe than sorry and refuse registration of a driver
without a probe function to prevent a NULL pointer exception.

Link: https://lore.kernel.org/r/20210624095059.4010157-2-sudeep.holla@arm.com
Fixes: 933c5044 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

When the driver core calls the probe callback it already checked that
the devices match, so there is no need to call the match callback again.

Link: https://lore.kernel.org/r/20210624095059.4010157-1-sudeep.holla@arm.comSuggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Update clock and reset definitions as per RZ/G2L_clock_list_r02_02.xlsx
and RZ/G2L HW(Rev.0.50) manual.

Update {GIC,IA55,SCIF} clock and reset entries in the CPG driver, and
separate reset from module clocks in order to handle them efficiently.

Update the SCIF0 clock and reset index in the SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-6-biju.das.jz@bp.renesas.com
Link: https://lore.kernel.org/r/20210626081344.5783-7-biju.das.jz@bp.renesas.com
Link: https://lore.kernel.org/r/20210626081344.5783-8-biju.das.jz@bp.renesas.com
[geert: Squashed 3 commits]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add support for P2 clock which is sourced from pll3_div2_4_2.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-5-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

As per RZ/G2L HW Manual(Rev.0.50) P1 is sourced from pll3_div2_4.
So fix the clock definitions for P1.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-4-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

As per RZ/G2L HW Manual (Rev.0.50), CPG_PL3A_DDIV,CPG_PL3B_DDIV
and CPG_PL2_DDIV(for P0) shares same divider table entries. Rename
clk_div_table dtable_3b to clk_div_table dtable_1_32 so that it
can be reused.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-3-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add multi clock PM support for cpg driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-2-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.

Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.

It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped.  Refine the tests.

There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.

(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)

Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.

TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Ingo Molnar:
 "Two fixes:

   - Fix a MIPS IRQ handling RCU bug

   - Remove a DocBook annotation for a parameter that doesn't exist
     anymore"

* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
  genirq/irqdesc: Drop excess kernel-doc entry @lookup

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - Fix load tracking bug/inconsistency

   - Fix a sporadic CFS bandwidth constraints enforcement bug

   - Fix a uclamp utilization tracking bug for newly woken tasks"

* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Ignore max aggregation if rq is idle
  sched/fair: Fix CFS bandwidth hrtimer expiry type
  sched/fair: Sync load_sum with load_avg after dequeue

Pull perf fixes from Ingo Molnar:
 "A fix and a hardware-enablement addition:

   - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup

   - Add cstate event support for Intel ICELAKE_X and ICELAKE_D"

* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Clean up error handling path of iio mapping
  perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support

Pull locking fixes from Ingo Molnar:

 - Fix a Sparc crash

 - Fix a number of objtool warnings

 - Fix /proc/lockdep output on certain configs

 - Restore a kprobes fail-safe

* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: sparc: Fix arch_cmpxchg64_local()
  kprobe/static_call: Restore missing static_call_text_reserved()
  static_call: Fix static_call_text_reserved() vs __init
  jump_label: Fix jump_label_text_reserved() vs __init
  locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes and clean ups in the core and various
  drivers.

  The only core change in behaviour is the I/O retry for spinup notify,
  but that shouldn't impact anything other than the failing case"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  scsi: virtio_scsi: Add validation for residual bytes from response
  scsi: ipr: System crashes when seeing type 20 error
  scsi: core: Retry I/O for Notify (Enable Spinup) Required error
  scsi: mpi3mr: Fix warnings reported by smatch
  scsi: qedf: Add check to synchronize abort and flush
  scsi: MAINTAINERS: Add mpi3mr driver maintainers
  scsi: libfc: Fix array index out of bound exception
  scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
  scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
  scsi: qedf: Use DEVICE_ATTR_RO() macro
  scsi: qedi: Use DEVICE_ATTR_RO() macro
  scsi: message: mptfc: Switch from pci_ to dma_ API
  scsi: be2iscsi: Fix some missing space in some messages
  scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
  scsi: ufs: Fix build warning without CONFIG_PM
  scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
  scsi: qla2xxx: Add heartbeat check
  scsi: virtio_scsi: Do not overwrite SCSI status
  scsi: libsas: Add LUN number check in .slave_alloc callback
  scsi: core: Inline scsi_mq_alloc_queue()
  ...