- 23 Jan, 2023 11 commits
-
-
Vladimir Oltean authored
The Felix VSC9959 switch supports frame preemption and has a MAC Merge layer. In addition to the structured stats that exist for the eMAC, export the counters associated with its pMAC (pause, RMON, MAC, PHY, control) plus the high-level MAC Merge layer stats. The unstructured ethtool counters, as well as the rtnl_link_stats64 were left to report only the eMAC counters. Because statistics processing is quite self-contained in ocelot_stats.c now, I've opted for introducing an ocelot->mm_supported bool, based on which the common switch lib does everything, rather than pushing the TSN-specific code in felix_vsc9959.c, as happens for other TSN stuff. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Some hardware instances of the ocelot driver support the MAC Merge layer, which gives access to an extra preemptible MAC. This has implications upon the statistics. There will be a stats layout when MM isn't supported, and a different one when it is. The ocelot_stats_layout() helper will return the correct one. In preparation of that, refactor the existing code to use this helper. Signed-off-by:
-
Vladimir Oltean authored
We will add support for pMAC counters and MAC merge layer counters, which are only reported via the structured stats, and the current ocelot_get_strings() stands in our way, because it expects that the statistics should be placed in the data array at the same index as found in the ocelot_stats_layout array. That is not true. Statistics which don't have a name should not be exported to the unstructured ethtool -S, so we need to have different indices into the ocelot_stats_layout array (i) and into the data array (data itself). Signed-off-by:
-
Vladimir Oltean authored
The DSA core is in charge of the ethtool_ops of the net devices associated with switch ports, so in case a hardware driver supports the MAC merge layer, DSA must pass the callbacks through to the driver. Add support for precisely that. Signed-off-by:
-
Vladimir Oltean authored
We deliberately make the Linux UAPI pass the minimum fragment size in octets, even though IEEE 802.3 defines it as discrete values, and addFragSize is just the multiplier. This is because there is nothing impossible in operating with an in-between value for the fragment size of non-final preempted fragments, and there may even appear hardware which supports the in-between sizes. For the hardware which just understands the addFragSize multiplier, create two helpers which translate back and forth the values passed in octets. Signed-off-by:
-
Vladimir Oltean authored
When a pMAC exists but the driver is unable to atomically query the aggregate eMAC+pMAC statistics, the user should be given back at least the sum of eMAC and pMAC counters queried separately. This is a generic problem, so add helpers in ethtool to do this operation, if the driver doesn't have a better way to report aggregate stats. Do this in a way that does not require changes to these functions when new stats are added (basically treat the structures as an array of u64 values, except for the first element which is the stats source). In include/linux/ethtool.h, there is already a section where helper function prototypes should be placed. The trouble is, this section is too early, before the definitions of struct ethtool_eth_mac_stats et.al. Move that section at the end and append these new helpers to it. Signed-off-by:
-
Vladimir Oltean authored
Two new netlink attributes were added to PAUSE_GET and STATS_GET and their replies. Document them. Signed-off-by:
-
Vladimir Oltean authored
IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an Express MAC and a Preemptible MAC. Both MACs are hidden to higher and lower layers and visible as a single MAC (packet classification to eMAC or pMAC on TX is done based on priority; classification on RX is done based on SFD). For devices which support a MAC Merge sublayer, it is desirable to retrieve individual packet counters from the eMAC and the pMAC, as well as aggregate statistics (their sum). Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these take values from enum ethtool_mac_stats_src, defaulting to "aggregate" in the absence of the attribute. Existing drivers do not need to pay attention to this enum which was added to all driver-facing structures, just the ones which report the MAC merge layer as supported. Signed-off-by:
-
Vladimir Oltean authored
Show details about the structures passed back and forth related to MAC Merge layer configuration, state and statistics. The rendered htmldocs will be much more verbose due to the kerneldoc references. Signed-off-by:
-
Vladimir Oltean authored
The MAC merge sublayer (IEEE 802.3-2018 clause 99) is one of 2 specifications (the other being Frame Preemption; IEEE 802.1Q-2018 clause 6.7.2), which work together to minimize latency caused by frame interference at TX. The overall goal of TSN is for normal traffic and traffic with a bounded deadline to be able to cohabitate on the same L2 network and not bother each other too much. The standards achieve this (partly) by introducing the concept of preemptible traffic, i.e. Ethernet frames that have a custom value for the Start-of-Frame-Delimiter (SFD), and these frames can be fragmented and reassembled at L2 on a link-local basis. The non-preemptible frames are called express traffic, they are transmitted using a normal SFD, and they can preempt preemptible frames, therefore having lower latency, which can matter at lower (100 Mbps) link speeds, or at high MTUs (jumbo frames around 9K). Preemption is not recursive, i.e. a P frame cannot preempt another P frame. Preemption also does not depend upon priority, or otherwise said, an E frame with prio 0 will still preempt a P frame with prio 7. In terms of implementation, the standards talk about the presence of an express MAC (eMAC) which handles express traffic, and a preemptible MAC (pMAC) which handles preemptible traffic, and these MACs are multiplexed on the same MII by a MAC merge layer. To support frame preemption, the definition of the SFD was generalized to SMD (Start-of-mPacket-Delimiter), where an mPacket is essentially an Ethernet frame fragment, or a complete frame. Stations unaware of an SMD value different from the standard SFD will treat P frames as error frames. To prevent that from happening, a negotiation process is defined. On RX, packets are dispatched to the eMAC or pMAC after being filtered by their SMD. On TX, the eMAC/pMAC classification decision is taken by the 802.1Q spec, based on packet priority (each of the 8 user priority values may have an admin-status of preemptible or express). The MAC Merge layer and the Frame Preemption parameters have some degree of independence in terms of how software stacks are supposed to deal with them. The activation of the MM layer is supposed to be controlled by an LLDP daemon (after it has been communicated that the link partner also supports it), after which a (hardware-based or not) verification handshake takes place, before actually enabling the feature. So the process is intended to be relatively plug-and-play. Whereas FP settings are supposed to be coordinated across a network using something approximating NETCONF. The support contained here is exclusively for the 802.3 (MAC Merge) portions and not for the 802.1Q (Frame Preemption) parts. This API is sufficient for an LLDP daemon to do its job. The FP adminStatus variable from 802.1Q is outside the scope of an LLDP daemon. I have taken a few creative licenses and augmented the Linux kernel UAPI compared to the standard managed objects recommended by IEEE 802.3. These are: - ETHTOOL_A_MM_PMAC_ENABLED: According to Figure 99-6: Receive Processing state diagram, a MAC Merge layer is always supposed to be able to receive P frames. However, this implies keeping the pMAC powered on, which will consume needless power in applications where FP will never be used. If LLDP is used, the reception of an Additional Ethernet Capabilities TLV from the link partner is sufficient indication that the pMAC should be enabled. So my proposal is that in Linux, we keep the pMAC turned off by default and that user space turns it on when needed. - ETHTOOL_A_MM_VERIFY_ENABLED: The IEEE managed object is called aMACMergeVerifyDisableTx. I opted for consistency (positive logic) in the boolean netlink attributes offered, so this is also positive here. Other than the meaning being reversed, they correspond to the same thing. - ETHTOOL_A_MM_MAX_VERIFY_TIME: I found it most reasonable for a LLDP daemon to maximize the verifyTime variable (delay between SMD-V transmissions), to maximize its chances that the LP replies. IEEE says that the verifyTime can range between 1 and 128 ms, but the NXP ENETC stupidly keeps this variable in a 7 bit register, so the maximum supported value is 127 ms. I could have chosen to hardcode this in the LLDP daemon to a lower value, but why not let the kernel expose its supported range directly. - ETHTOOL_A_MM_TX_MIN_FRAG_SIZE: the standard managed object is called aMACMergeAddFragSize, and expresses the "additional" fragment size (on top of ETH_ZLEN), whereas this expresses the absolute value of the fragment size. - ETHTOOL_A_MM_RX_MIN_FRAG_SIZE: there doesn't appear to exist a managed object mandated by the standard, but user space clearly needs to know what is the minimum supported fragment size of our local receiver, since LLDP must advertise a value no lower than that. Signed-off-by:
-
Peilin Ye authored
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready() callback implementations. For example: <...> iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable <...> Suggested-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Signed-off-by:
-
- 21 Jan, 2023 17 commits
-
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Add support of latency TLV Amit Cohen writes: Ethernet Management Datagrams (EMADs) are Ethernet packets sent between the driver and device's firmware. They are used to pass various configurations to the device, but also to get events (e.g., port up) from it. After the Ethernet header, these packets are built in a TLV format. This is the structure of EMADs: * Ethernet header * Operation TLV * String TLV (optional) * Latency TLV (optional) * Reg TLV * End TLV The latency of each EMAD is measured by firmware. The driver can get the measurement via latency TLV which can be added to each EMAD. This TLV is optional, when EMAD is sent with this TLV, the EMAD's response will include the TLV and will contain the firmware measurement. Add support for Latency TLV and use it by default for all EMADs (see more information in commit messages). The latency measurements can be processed using BPF program for example, to create a histogram and average of the latency per register. In addition, it is possible to measure the end-to-end latency, so then the latency of the software overhead can be calculated. This information can be useful to improve the driver performance. See an example of output of BPF tool which presents these measurements: $ ./emadlatency -f -a Tracing EMADs... Hit Ctrl-C to end. Register write = RALUE (0x8013) E2E Measurements: average = 23 usecs, total = 32052693 usecs, count = 1337061 usecs : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 1290814 |*********************************| 32 -> 63 : 45339 |* | 64 -> 127 : 532 | | 128 -> 255 : 247 | | 256 -> 511 : 57 | | 512 -> 1023 : 26 | | 1024 -> 2047 : 33 | | 2048 -> 4095 : 0 | | 4096 -> 8191 : 10 | | 8192 -> 16383 : 1 | | 16384 -> 32767 : 1 | | 32768 -> 65535 : 1 | | Firmware Measurements: average = 10 usecs, total = 13884128 usecs, count = 1337061 usecs : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 1337035 |*********************************| 16 -> 31 : 17 | | 32 -> 63 : 7 | | 64 -> 127 : 0 | | 128 -> 255 : 2 | | Diff between measurements: 13 usecs Patch set overview: Patches #1-#3 add support for querying MGIR, to know if string TLV and latency TLV are supported Patches #4-#5 add some relevant fields to support latency TLV Patch #6 adds support of latency TLV ==================== Link: https://lore.kernel.org/r/cover.1674123673.git.petrm@nvidia.comSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Amit Cohen authored
The latency of each EMAD can be measured by firmware. The driver can get the measurement via latency TLV which can be added to each EMAD. This TLV is optional, when EMAD is sent with this TLV, the EMAD's response will include the TLV and the field 'latency_time' will contain the firmware measurement. This information can be processed using BPF program for example, to create a histogram and average of the latency per register. In addition, it is possible to measure the end-to-end latency, and then reduce firmware measurement, which will result in the latency of the software overhead. This information can be useful to improve the driver performance. Add support for latency TLV by default for all EMADs. First we planned to enable latency TLV per demand, using devlink-param. After some tests, we know that the usage of latency TLV does not impact the end-to-end latency, so it is OK to enable it by default. Note that similar to string TLV, the latency TLV is not supported in all firmware versions. Enable the usage of this TLV only after verifying it is supported by the current firmware version by querying the Management General Information Register (MGIR). Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Amit Cohen authored
The next patch will add support for latency TLV as part of EMAD (Ethernet Management Datagrams) packets. As preparation, add the relevant fields. Signed-off-by:
-
Amit Cohen authored
The next patches will add support for latency TLV as part of EMAD (Ethernet Management Datagrams) packets. As preparation, add the relevant values. Signed-off-by:
-
Amit Cohen authored
Till now, the field 'mlxsw_core->emad.enable_string_tlv' is set as part of mlxsw_sp_init(), this means that it can be changed during emad_reg_access(). To avoid such change, this field is read once in emad_reg_access() and the value is used all the way. The previous patch sets this value according to MGIR output, as part of mlxsw_emad_init(), so now it cannot be changed while sending EMADs. Do not save 'enable_string_tlv' and do not pass it to functions, just pass 'struct mlxsw_core' and use the value directly from it. Signed-off-by:
-
Amit Cohen authored
String TLV is not supported by old firmware versions, therefore 'struct mlxsw_core' stores the field 'emad.enable_string_tlv', which is set to true only after firmware version check. Instead of assuming that firmware version check is enough to enable string TLV, a better solution is to query if this TLV is supported from MGIR register. Add such query and initialize 'emad.enable_string_tlv' accordingly. Signed-off-by:
-
Amit Cohen authored
MGIR (Management General Information Register) allows software to query the hardware and firmware general information. As part of firmware information, the driver can query if string TLV and latency TLV are supported. These TLVs are part of EMAD's header and are used to provide information per EMAD packet to software. Currently, string TLV is already used by the driver, but it does not query if this TLV is supported from MGIR. The next patches will add support of latency TLV. Add the relevant fields to MGIR, so then the driver will query them to know if the TLVs are supported before using them. Signed-off-by:
-
Nikhil Gupta authored
1588 driver loses about 1us in adjtime operation at PTP slave This is because adjtime operation uses a slow non-atomic tmr_cnt_read() followed by tmr_cnt_write() operation. In the above sequence, since the timer counter operation keeps incrementing, it leads to latency. The tmr_offset register (which is added to TMR_CNT_H/L register giving the current time) must be programmed with the delta nanoseconds. Signed-off-by:
Nikhil Gupta <nikhil.gupta@nxp.com> Reviewed-by:
-
Yang Yingliang authored
Use kmemdup() helper instead of open-coding to simplify the code when allocating newckf and newcaf. Generated by: scripts/coccinelle/api/memdup.cocci Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20230119092210.3607634-1-yangyingliang@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Michael Walle says: ==================== net: mdio: Remove support for building C45 muxed addresses I've picked this older series from Andrew up and rebased it onto the latest net-next. With all drivers which support c45 now being converted to a seperate c22 and c45 access op, we can now remove the old MII_ADDR_C45 flag. ==================== Link: https://lore.kernel.org/r/20230119130700.440601-1-michael@walle.ccSigned-off-by:
-
Andrew Lunn authored
The old way of performing a C45 bus transfer created a special register value and passed it to the MDIO bus driver, in the hope it would see the MII_ADDR_C45 bit set, and perform a C45 transfer. Now that there is a clear separation of C22 and C45, this scheme is no longer used. Remove all the #defines and helpers, to prevent any code being added which tries to use it. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Andrew Lunn authored
The MDIO core should not pass a C45 request via the C22 API call any more. So remove the tests from the drivers. Signed-off-by:
-
Michael Walle authored
With the new C45 MDIO access API, there is no encoding of the register number anymore and thus the masking isn't necessary anymore. Remove it. Signed-off-by:
-
Andrew Lunn authored
Now that all MDIO bus drivers which support C45 implement the c45 specific ops, remove the fallback to the old method. Signed-off-by:
-
Jakub Kicinski authored
Hayes Wang says: ==================== r8152: improve the code These are some minor improvements depending on commit ec51fbd1 ("r8152: add USB device driver for config selection"). ==================== Link: https://lore.kernel.org/r/20230119074043.10021-397-nic_swsd@realtek.comSigned-off-by:
-
Hayes Wang authored
Reduce the control transfer by moving calling rtl8152_get_version() in rtl8152_probe(). This could prevent from calling rtl8152_get_version() for unnecessary situations. For example, after setting config #2 for the device, there are two interfaces and rtl8152_probe() may be called twice. However, we don't need to call rtl8152_get_version() for this situation. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Hayes Wang authored
After commit ec51fbd1 ("r8152: add USB device driver for config selection"), the code about changing USB configuration in rtl_vendor_mode() wouldn't be run anymore. Therefore, the function could be removed. Signed-off-by:
-
- 20 Jan, 2023 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a3 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f ("net: ipa: introduce ipa_interrupt_enable()") d50ed355 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bluetooth, bpf and netfilter. Current release - regressions: - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf", fix nsna_ping mode of team - wifi: mt76: fix bugs in Rx queue handling and DMA mapping - eth: mlx5: - add missing mutex_unlock in error reporter - protect global IPsec ASO with a lock Current release - new code bugs: - rxrpc: fix wrong error return in rxrpc_connect_call() Previous releases - regressions: - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2 - wifi: - mac80211: fix crashes on Rx due to incorrect initialization of rx->link and rx->link_sta - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect aggregation handling, crashes - brcmfmac: fix regression for Broadcom PCIe wifi devices - rndis_wlan: prevent buffer overflow in rndis_query_oid - netfilter: conntrack: handle tcp challenge acks during connection reuse - sched: avoid grafting on htb_destroy_class_offload when destroying - virtio-net: correctly enable callback during start_xmit, fix stalls - tcp: avoid the lookup process failing to get sk in ehash table - ipa: disable ipa interrupt during suspend - eth: stmmac: enable all safety features by default Previous releases - always broken: - bpf: - fix pointer-leak due to insufficient speculative store bypass mitigation (Spectre v4) - skip task with pid=1 in send_signal_common() to avoid a splat - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events - fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index - bluetooth: - fix a buffer overflow in mgmt_mesh_add() - hci_qca: fix driver shutdown on closed serdev - ISO: fix possible circular locking dependency - CIS: hci_event: fix invalid wait context - wifi: brcmfmac: fixes for survey dump handling - mptcp: explicitly specify sock family at subflow creation time - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits - tcp: fix rate_app_limited to default to 1 - l2tp: close all race conditions in l2tp_tunnel_register() - eth: mlx5: fixes for QoS config and eswitch configuration - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp() - eth: stmmac: fix invalid call to mdiobus_get_phy() Misc: - ethtool: add netlink attr in rss get reply only if the value is not empty" * tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) Revert "Merge branch 'octeontx2-af-CPT'" tcp: fix rate_app_limited to default to 1 bnxt: Do not read past the end of test names net: stmmac: enable all safety features by default octeontx2-af: add mbox to return CPT_AF_FLT_INT info octeontx2-af: update cpt lf alloc mailbox octeontx2-af: restore rxc conf after teardown sequence octeontx2-af: optimize cpt pf identification octeontx2-af: modify FLR sequence for CPT octeontx2-af: add mbox for CPT LF reset octeontx2-af: recover CPT engine when it gets fault net: dsa: microchip: ksz9477: port map correction in ALU table entry register selftests/net: toeplitz: fix race on tpacket_v3 block close net/ulp: use consistent error code when blocking ULP octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt tcp: avoid the lookup process failing to get sk in ehash table Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf" MAINTAINERS: add networking entries for Willem net: sched: gred: prevent races when adding offloads to stats l2tp: prevent lockdep issue in l2tp_tunnel_register() ... -
Jakub Kicinski authored
This reverts commit b4fbf0b2, reversing changes made to 6c977c5c. This seems like net-next material. Signed-off-by:
-
Jakub Kicinski authored
Srujana Challa says: ==================== octeontx2-af: Miscellaneous changes for CPT This patchset consists of miscellaneous changes for CPT. - Adds a new mailbox to reset the requested CPT LF. - Modify FLR sequence as per HW team suggested. - Adds support to recover CPT engines when they gets fault. - Updates CPT inbound inline IPsec configuration mailbox, as per new generation of the OcteonTX2 chips. - Adds a new mailbox to return CPT FLT Interrupt info. ==================== Link: https://lore.kernel.org/r/20230118120354.1017961-1-schalla@marvell.comSigned-off-by:
-
Srujana Challa authored
CPT HW would trigger the CPT AF FLT interrupt when CPT engines hits some uncorrectable errors and AF is the one which receives the interrupt and recovers the engines. This patch adds a mailbox for CPT VFs to request for CPT faulted and recovered engines info. Signed-off-by:
Srujana Challa <schalla@marvell.com> Signed-off-by:
-
Srujana Challa authored
The CN10K CPT coprocessor contains a context processor to accelerate updates to the IPsec security association contexts. The context processor contains a context cache. This patch updates CPT LF ALLOC mailbox to config ctx_ilen requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of initial context fetch. Signed-off-by:
-
Nithin Dabilpuram authored
CN10K CPT coprocessor includes a component named RXC which is responsible for reassembly of inner IP packets. RXC has the feature to evict oldest entries based on age/threshold. The age/threshold is being set to minimum values to evict all entries at the time of teardown. This patch adds code to restore timeout and threshold config after teardown sequence is complete as it is global config. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
-
Srujana Challa authored
Optimize CPT PF identification in mbox handling for faster mbox response by doing it at AF driver probe instead of every mbox message. Signed-off-by:
-
Srujana Challa authored
On OcteonTX2 platform CPT instruction enqueue is only possible via LMTST operations. The existing FLR sequence mentioned in HRM requires a dummy LMTST to CPT but LMTST can't be submitted from AF driver. So, HW team provided a new sequence to avoid dummy LMTST. This patch adds code for the same. Signed-off-by:
-
Srujana Challa authored
On OcteonTX2 SoC, the admin function (AF) is the only one with all priviliges to configure HW and alloc resources, PFs and it's VFs have to request AF via mailbox for all their needs. This patch adds a new mailbox for CPT VFs to request for CPT LF reset. Signed-off-by:
-
Srujana Challa authored
When CPT engine has uncorrectable errors, it will get halted and must be disabled and re-enabled. This patch adds code for the same. Signed-off-by:
-
Arkadiusz Kubalewski authored
Previously support for GNSS was implemented as a TTY driver, it allowed to access GNSS receiver on /dev/ttyGNSS_<bus><func>. Use generic GNSS subsystem API instead of implementing own TTY driver. The receiver is accessible on /dev/gnss<id>. In case of multiple receivers in the OS, correct device can be found by enumerating either: - /sys/class/net/<eth port>/device/gnss/ - /sys/class/gnss/gnss<id>/device/ Using GNSS subsystem is superior to implementing own TTY driver, as the GNSS subsystem was designed solely for this purpose. It also implements TTY driver but in a common and defined way. From user perspective, there is no difference in communicating with a device, except new path to the device shall be used. The device will provide same information to the userspace as the old one, and can be used in the same way, i.e.: old # gpsmon /dev/ttyGNSS_2100_0 new # gpsmon /dev/gnss0 There is no other impact on userspace tools. User expecting onboard GNSS receiver support is required to enable CONFIG_GNSS=y/m in kernel config. Reviewed-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by:
Michal Michalik <michal.michalik@intel.com> Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
