- 05 Sep, 2013 4 commits
-
-
Weston Andros Adamson authored
Add nfs4_state_protect - the function responsible for switching to the machine credential and the correct rpc client when SP4_MACH_CRED is in use. Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Weston Andros Adamson authored
This is a minimal client side implementation of SP4_MACH_CRED. It will attempt to negotiate SP4_MACH_CRED iff the EXCHANGE_ID is using krb5i or krb5p auth. SP4_MACH_CRED will be used if the server supports the minimal operations: BIND_CONN_TO_SESSION EXCHANGE_ID CREATE_SESSION DESTROY_SESSION DESTROY_CLIENTID This patch only includes the EXCHANGE_ID negotiation code because the client will already use the machine cred for these operations. If the server doesn't support SP4_MACH_CRED or doesn't support the minimal operations, the exchange id will be resent with SP4_NONE. Signed-off-by:
-
Trond Myklebust authored
Instead of the pointer values, use the task and client identifier values for tracing purposes. Signed-off-by: -
Trond Myklebust authored
Add an identifier in order to aid debugging. Signed-off-by:
-
- 04 Sep, 2013 6 commits
-
-
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Rename the new 'recover_locks' kernel parameter to 'recover_lost_locks' and change the default to 'false'. Document why in Documentation/kernel-parameters.txt Move the 'recover_lost_locks' kernel parameter to fs/nfs/super.c to make it easy to backport to kernels prior to 3.6.x, which don't have a separate NFSv4 module. Signed-off-by: -
NeilBrown authored
When an NFSv4 client loses contact with the server it can lose any locks that it holds. Currently when it reconnects to the server it simply tries to reclaim those locks. This might succeed even though some other client has held and released a lock in the mean time. So the first client might think the file is unchanged, but it isn't. This isn't good. If, when recovery happens, the locks cannot be claimed because some other client still holds the lock, then we get a message in the kernel logs, but the client can still write. So two clients can both think they have a lock and can both write at the same time. This is equally not good. There was a patch a while ago http://comments.gmane.org/gmane.linux.nfs/41917 which tried to address some of this, but it didn't seem to go anywhere. That patch would also send a signal to the process. That might be useful but for now this patch just causes writes to fail. For NFSv4 (unlike v2/v3) there is a strong link between the lock and the write request so we can fairly easily fail any IO of the lock is gone. While some applications might not expect this, it is still safer than allowing the write to succeed. Because this is a fairly big change in behaviour a module parameter, "recover_locks", is introduced which defaults to true (the current behaviour) but can be set to "false" to tell the client not to try to recover things that were lost. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Trond Myklebust authored
Add client side debugging to help trace socket connection/disconnection and unexpected state change issues. Signed-off-by: -
Chuck Lever authored
When CONFIG_NFS_V4_1 is not enabled, gcc emits this warning: linux/fs/nfs/nfs4state.c:255:12: warning: ‘nfs4_begin_drain_session’ defined but not used [-Wunused-function] static int nfs4_begin_drain_session(struct nfs_client *clp) ^ Eventually NFSv4.0 migration recovery will invoke this function, but that has not yet been merged. Hide nfs4_begin_drain_session() behind CONFIG_NFS_V4_1 for now. Signed-off-by:Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
linux/fs/nfs/nfs4session.c:337:6: warning: symbol 'nfs41_set_target_slotid' was not declared. Should it be static? Move nfs41_set_target_slotid() and nfs41_update_target_slotid() back behind CONFIG_NFS_V4_1, since, in the final revision of this work, they are used only in NFSv4.1 and later. Signed-off-by:
-
- 03 Sep, 2013 21 commits
-
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Ensure OPEN_CONFIRM is not emitted while the transport is plugged. Signed-off-by:
-
Chuck Lever authored
Ensure RELEASE_LOCKOWNER is not emitted while the transport is plugged. Signed-off-by:
-
Chuck Lever authored
When CONFIG_NFS_V4_1 is disabled, the calls to nfs4_setup_sequence() and nfs4_sequence_done() are compiled out for the DELEGRETURN operation. To allow NFSv4.0 transport blocking to work for DELEGRETURN, these call sites have to be present all the time. Signed-off-by:
-
Chuck Lever authored
Plumb in a mechanism for plugging an NFSv4.0 mount, using the same infrastructure as NFSv4.1 sessions. Signed-off-by:
-
Chuck Lever authored
Anchor an nfs4_slot_table in the nfs_client for use with NFSv4.0 transport blocking. It is initialized only for NFSv4.0 nfs_client's. Introduce appropriate minor version ops to handle nfs_client initialization and shutdown requirements that differ for each minor version. Signed-off-by:
-
Chuck Lever authored
The nfs4_destroy_slot_tables() function is renamed to avoid confusion with the new helper. Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
I'd like to re-use NFSv4.1's slot table machinery for NFSv4.0 transport blocking. Re-organize some of nfs4session.c so the slot table code is built even when NFS_V4_1 is disabled. Signed-off-by:
-
Chuck Lever authored
Clean up. Signed-off-by:
-
Chuck Lever authored
Refactor nfs4_call_sync_sequence() so it is used for NFSv4.0 now. The RPC callouts will house transport blocking logic similar to NFSv4.1 sessions. Signed-off-by:
-
Chuck Lever authored
NFSv4.0 will have need for this functionality when I add the ability to block NFSv4.0 traffic before migration recovery. I'm not really clear on why nfs4_set_sequence_privileged() gets a generic name, but nfs41_init_sequence() gets a minor version-specific name. Signed-off-by:
-
Chuck Lever authored
Clean up: Both the NFSv4.0 and NFSv4.1 version of nfs4_setup_sequence() are used only in fs/nfs/nfs4proc.c. No need to keep global header declarations for either version. Signed-off-by:
-
Chuck Lever authored
Clean up: rename nfs41_call_sync_data for use as a data structure common to all NFSv4 minor versions. Signed-off-by:
-
Chuck Lever authored
Clean up, since slot and sequence numbers are all unsigned anyway. Among other things, squelch compiler warnings: linux/fs/nfs/nfs4proc.c: In function ‘nfs4_setup_sequence’: linux/fs/nfs/nfs4proc.c:703:2: warning: signed and unsigned type in conditional expression [-Wsign-compare] and linux/fs/nfs/nfs4session.c: In function ‘nfs4_alloc_slot’: linux/fs/nfs/nfs4session.c:151:31: warning: signed and unsigned type in conditional expression [-Wsign-compare] Signed-off-by:
-
Trond Myklebust authored
If an NFS client does mkdir("dir"); fd = open("dir/file"); unlink("dir/file"); close(fd); rmdir("dir"); then the asynchronous nature of the sillyrename operation means that we can end up getting EBUSY for the rmdir() in the above test. Fix that by ensuring that we wait for any in-progress sillyrenames before sending the rmdir() to the server. Signed-off-by: -
Weston Andros Adamson authored
Commit 5ec16a85 introduced a regression that causes SECINFO to fail without actualy sending an RPC if: 1) the nfs_client's rpc_client was using KRB5i/p (now tried by default) 2) the current user doesn't have valid kerberos credentials This situation is quite common - as of now a sec=sys mount would use krb5i for the nfs_client's rpc_client and a user would hardly be faulted for not having run kinit. The solution is to use the machine cred when trying to use an integrity protected auth flavor for SECINFO. Older servers may not support using the machine cred or an integrity protected auth flavor for SECINFO in every circumstance, so we fall back to using the user's cred and the filesystem's auth flavor in this case. We run into another problem when running against linux nfs servers - they return NFS4ERR_WRONGSEC when using integrity auth flavor (unless the mount is also that flavor) even though that is not a valid error for SECINFO*. Even though it's against spec, handle WRONGSEC errors on SECINFO by falling back to using the user cred and the filesystem's auth flavor. Signed-off-by:
-
Andy Adamson authored
Most of the time an error from the credops crvalidate function means the server has sent us a garbage verifier. The gss_validate function is the exception where there is an -EACCES case if the user GSS_context on the client has expired. Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
We must avoid buffering a WRITE that is using a credential key (e.g. a GSS context key) that is about to expire or has expired. We currently will paint ourselves into a corner by returning success to the applciation for such a buffered WRITE, only to discover that we do not have permission when we attempt to flush the WRITE (and potentially associated COMMIT) to disk. Use the RPC layer credential key timeout and expire routines which use a a watermark, gss_key_expire_timeo. We test the key in nfs_file_write. If a WRITE is using a credential with a key that will expire within watermark seconds, flush the inode in nfs_write_end and send only NFS_FILE_SYNC WRITEs by adding nfs_ctx_key_to_expire to nfs_need_sync_write. Note that this results in single page NFS_FILE_SYNC WRITEs. Signed-off-by:
-
Andy Adamson authored
This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by:
-
Andy Adamson authored
The NFS layer needs to know when a key has expired. This change also returns -EKEYEXPIRED to the application, and the informative "Key has expired" error message is displayed. The user then knows that credential renewal is required. Signed-off-by:
-
- 02 Sep, 2013 2 commits
-
-
Trond Myklebust authored
Ensure that we set rpc_clnt->cl_parent before calling rpc_client_register so that rpcauth_create can find any existing RPCSEC_GSS caches for this transport. Signed-off-by: -
Trond Myklebust authored
Ensure that all struct rpc_clnt for any given socket/rdma channel share the same RPCSEC_GSS/krb5,krb5i,krb5p caches. Signed-off-by:
-
- 01 Sep, 2013 6 commits
-
-
Trond Myklebust authored
Ensure that if an rpc_clnt owns more than one RPCSEC_GSS-based authentication mechanism, then those caches will share the same 'gssd' upcall pipe. Signed-off-by: -
Trond Myklebust authored
Add support for looking up existing objects and creating new ones if there is no match. Signed-off-by: -
Trond Myklebust authored
It is now redundant. Signed-off-by: -
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Signed-off-by:
-
- 30 Aug, 2013 1 commit
-
-
Trond Myklebust authored
The current system requires everyone to set up notifiers, manage directory locking, etc. What we really want to do is have the rpc_client create its directory, and then create all the entries. This patch will allow the RPCSEC_GSS and NFS code to register all the objects that they want to have appear in the directory, and then have the sunrpc code call them back to actually create/destroy their pipefs dentries when the rpc_client creates/destroys the parent. Signed-off-by:
-
