- 08 Nov, 2012 40 commits
-
-
Lars Ellenberg authored
The commit drbd: simplify retry path of failed READ requests simplified it too much: it just did not do anything for local read errors. Add the missing req_may_be_completed_not_susp() to the READ_COMPLETED_WITH_ERROR case. Signed-off-by:Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
BUG: unable to handle kernel NULL pointer dereference at (null) ... [<d1e17561>] ? _drbd_bm_set_bits+0x151/0x240 [drbd] [<d1e236f8>] ? receive_bitmap+0x4f8/0xbc0 [drbd] This fixes an off-by-one error in the receive_bitmap() path, if run-length encoded bitmap transfer is enabled. If the bitmap is an exact multiple of PAGE_SIZE, which means the visible capacity of the drbd device is an exact multiple of 128 MiB (for 4k page size), and bitmap compression (use-rle) is enabled (which became default with 8.4), and the very last bit is dirty and reported in an rle comressed bitmap packet, we ended up trying to kmap_atomic a page pointer that does not exist (bitmap->bm_pages[last index + 1]). bug introduced by: Date: Fri Jul 24 15:33:24 2009 +0200 set bits: optimize for complete last word, fix off-by-one-word corner case made effective by: Date: Thu Dec 16 00:32:38 2010 +0100 drbd: get rid of unused debug code Long time ago, we had paranoia code in the bitmap that allocated one extra word, assigned a magic value, and checked on every occasion that the magic value was still unchanged. That debug code is unused, the extra long word complicates code a bit. Get rid of it. No-one triggered this bug in the last few years, because a large subset of our userbase is unaffected: * typically the last few blocks of a device are not modified frequently, and remain unset * use-rle was disabled by default in drbd < 8.4 * those with slightly "odd" device sizes, or * drbd internal meta data (which will skew the device size slightly, thus makes it harder to have a bug relevant device size) Signed-off-by: -
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
By disabling al-updates one might increase performace. The price for that is that in case a crashed primary (that had al-updates disabled) is reintegraded, it will receive a full-resync instead of a bitmap based resync. Signed-off-by:
-
Andreas Gruenbacher authored
These macros no longer exist in kernel version v3.5-rc1. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
The buffer 'sc.cpu_mask' is a kernel buffer. If bitmap_parse is used instead of __bitmap_parse the extra parameter that indicates a kernel buffer is not needed. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
If bm_page_async_io is advised to use a new page for I/O (BM_AIO_COPY_PAGES is set), it will get it from a mempool. Once the mempool has to dip into its reserves the page is not reinitialized, i.e. page->private contains garbage, which will lead to various problems once the I/O completes (dereferences of NULL pointers, the submitting thread getting stuck in D-state, ...). Signed-off-by:
Arne Redlich <arne.redlich@googlemail.com> Signed-off-by:
-
Lars Ellenberg authored
Symptom: messages similar to "FIXME asender in bm_change_bits_to, bitmap locked for 'write from resync_finished' by worker" If a resync or verify is finished (or aborted), a full bitmap writeout is triggered. If we have ongoing local IO, the bitmap may still change during that writeout, pending and not yet processed acks may cause bits to be cleared, while new writes may cause bits to be to be set. To fix this, introduce the drbd_bm_write_copy_pages() variant. Signed-off-by:
-
Lars Ellenberg authored
When a resync or online verify is finished or aborted, drbd does a bulk write-out of changed bitmap pages. If *in that very moment* a new verify or resync is triggered, this can race: ASSERT( !test_bit(BITMAP_IO, &mdev->flags) ) in drbd_main.c FIXME going to queue 'set_n_write from StartingSync' but 'write from resync_finished' still pending? and similar. This can be observed with e.g. tight invalidate loops in test scripts, and probably has no real-life implication. Still, that race can be solved by first quiescen the device, before starting a new resync or verify. Signed-off-by:
-
Lars Ellenberg authored
DRBD can freeze IO, due to fencing policy (fencing resource-and-stonith), or because we lost access to data (on-no-data-accessible suspend-io). Resuming from there (re-connect, or re-attach, or explicit admin intervention) should "just work". Unfortunately, if the re-attach/re-connect did not happen within the timeout, since the commit drbd: Implemented real timeout checking for request processing time if so configured, the request_timer_fn() would timeout and detach/disconnect virtually immediately. This change tracks the most recent attach and connect, and does not timeout within <configured timeout interval> after attach/connect. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
This could be exploited by a peer which runs modified code. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Philipp Reisner authored
Changes to the role and disk state should be delayed or rejected while we establish a connection. This is necessary, since the peer will base its resync decision on the UUIDs and the state we sent in the drbd_connect() function. The most prominent example for this race is becoming primary after sending state and UUIDs and before the state changes to C_WF_CONNECTION. Signed-off-by:
-
Philipp Reisner authored
Since drbd_bump_write_ordering() is called in the attaching process while the disk state is D_ATTACHING, it was not considering these three flags during attach. A call to this function was missing form drbd_adm_disk_opts(). Fixed both issues. Signed-off-by:
-
Lars Ellenberg authored
Transfer log epochs, and therefore P_BARRIER packets, are per resource, not per volume. We must not associate them with "some random volume". Signed-off-by:
-
Lars Ellenberg authored
complete_conflicting_writes() should not cause -EIO. It should not timeout either, or care for connection states. Connection timeout is detected elsewhere, and it's cleanup path is supposed to remove any pending requests or peer_requests from the write_requests tree. Signed-off-by:
-
Lars Ellenberg authored
If a local or remote READ request fails, just push it back to the retry workqueue. It will re-enter __drbd_make_request, and be re-assigned to a suitable local or remote path, or failed, if we do not have access to good data anymore. This obsoletes w_read_retry_remote(), and eliminates two goto...retry blocks in __req_mod() Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
In preparation for multiple connections and reference counting, separate the code paths for completion of the master bio and destruction of the request object. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
w_restart_write(), run from worker context, calls __drbd_make_request() and further drbd_al_begin_io(, delegate=true), which then potentially deadlocks. The previous patch moved a BUG_ON to expose such call paths, which would now be triggered. Also, if we call __drbd_make_request() from resource worker context, like w_restart_write() did, and that should block for whatever reason (!drbd_state_is_stable(), resource suspended, ...), we potentially deadlock the whole resource, as the worker is needed for state changes and other things. Create a dedicated retry workqueue for this instead. Also make sure that inc_ap_bio()/dec_ap_bio() are properly paired, even if do_retry() needs to retry itself, in case __drbd_make_request() returns != 0. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
When we have a write request and a state change C_WF_BITMAP_S -> C_SYNC_SOURCE at the same time, and it happens that the line remote = remote && drbd_should_do_remote(s); stills sees C_WF_BITMAP_S, and send_oos = rw == WRITE && drbd_should_send_oos(s); already sees C_SYNC_SOURCE both are 0. This causes the write to not be mirrored, but marked as out-of-sync on the Sync_Source node. Signed-off-by: -
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Without this, iostat frequently sees bogus svctime and >= 100% "utilization". Signed-off-by:
-
