- 09 Apr, 2021 10 commits
-
-
Ofir Bitton authored
In order to support command submissions from user space, the driver need to add support for user interrupt completions. The driver will allow multiple user threads to wait for an interrupt and perform a comparison with a given user address once interrupt expires. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Ofir Bitton authored
In order to support user interrupts, driver must enable all MSI-X interrupts for any case user will trigger them. We differentiate between a valid user interrupt and a non valid one. Signed-off-by:
-
Ohad Sharabi authored
As the F/wW is the first to detect out of sync event, a new event is added to notify the driver on such event. In which case the driver performs hard reset. Signed-off-by:
Ohad Sharabi <osharabi@habana.ai> Reviewed-by:
-
Oded Gabbay authored
Because our graph contains network operations, we need to account for delay in the network. 5 seconds timeout per CS is not enough to account for that. Signed-off-by: -
Oded Gabbay authored
Notify to the user that although he closed the FD, the device is still in use because there are live CS and/or memory mappings (mmaps). Signed-off-by: -
Oded Gabbay authored
Move the field to correct location in structure and remove comment. Signed-off-by: -
Oded Gabbay authored
After any reset (soft or hard) the device (the engines/QMANs) should be idle. If they are not idle, fail the reset. If it is soft-reset, the driver will try to do hard-reset automatically. If it is hard-reset, the driver will make the device non-operational. Signed-off-by: -
Oded Gabbay authored
The device is actually released only after the refcnt of the hpriv structure is 0, which means all its contexts were closed. If we reset the device while a context is still open, there are possibilities for unexpected behavior and crashes. For example, if the process has a mapping of a register block that is now currently being reset, and the process writes/reads to that block during the reset, the device can get stuck. Signed-off-by: -
Ofir Bitton authored
In order to support command submissions that are done directly from user space, the driver must perform soft reset once user closes its FD. In case the soft reset fails or device is not idle, a hard reset should be performed. Signed-off-by:
-
farah kassabri authored
currently we support only 2 asids in all asics. asid 0 for driver, and asic 1 for user. no need to setup 1024 asids configurations at init phase. Signed-off-by:
farah kassabri <fkassabri@habana.ai> Reviewed-by:
-
- 08 Apr, 2021 7 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon next for v5.13 Detailed description for this pull request: 1. Update extcon provider driver - Add the support of charging interrupt to detect charger connector for extcon-max8997.c - Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c - Add the support for VBUS detection for extcon-qcom-spmi-misc.c and replace qcom,pm8941-misc binding document with yaml style. * tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: qcom-spmi: Add support for VBUS detection bindings: pm8941-misc: Add support for VBUS detection bindings: pm8941-misc: Convert bindings to YAML extcon: sm5502: Detect OTG when USB_ID is connected to ground extcon: max8997: Add CHGINS and CHGRM interrupt handling
-
Greg Kroah-Hartman authored
Merge tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: Second set of FPGA Manager changes for 5.13-rc1 FPGA Manager: - Russ' first change improves port_enable reliability - Russ' second change adds a new device ID for a DFL device - Geert's change updates the examples in binding with dt overlay sugar syntax All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of my for-next branch) without issues. Signed-off-by:
Moritz Fischer <mdf@kernel.org> * tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: pci: add DID for D5005 PAC cards dt-bindings: fpga: fpga-region: Convert to sugar syntax fpga: dfl: afu: harden port enable logic fpga: Add support for Xilinx DFX AXI Shutdown manager dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe() fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
-
Anirudh Ghayal authored
VBUS can be detected via a dedicated PMIC pin. Add support for reporting the VBUS status. Signed-off-by:
Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by:
Kavya Nunna <knunna@codeaurora.org> Signed-off-by:
Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com>
-
Guru Das Srinagesh authored
Add interrupt support for reporting VBUS detection status that can be detected via a dedicated PMIC pin. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Guru Das Srinagesh authored
Convert bindings from txt to YAML. Signed-off-by:
-
Nikita Travkin authored
In it's curent state this driver ignores OTG adapters with ID pin connected to ground. This commit adds a check to set extcon into host mode when such OTG adapter is connected. Signed-off-by:
Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by:
-
Timon Baetz authored
This allows the MAX8997 charger to set the current limit depending on the detected extcon charger type. Signed-off-by:
Timon Baetz <timon.baetz@protonmail.com> Signed-off-by:
-
- 07 Apr, 2021 6 commits
-
-
Mathieu Poirier authored
Adding CoreSight headers to the list of supported files so that maintainers can be notified when changes are submitted. Link: https://lore.kernel.org/r/20210326155431.2011889-1-mathieu.poirier@linaro.orgSigned-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210407160007.418053-5-mathieu.poirier@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qi Liu authored
Fix the following checkpatch warning: WARNING: 'compoment' may be misspelled - perhaps 'component'? Link: https://lore.kernel.org/r/1616487086-50418-1-git-send-email-liuqi115@huawei.comSigned-off-by:
Qi Liu <liuqi115@huawei.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210407160007.418053-4-mathieu.poirier@linaro.orgSigned-off-by:
-
Wei Yongjun authored
The sparse tool complains as follows: drivers/hwtracing/coresight/coresight-etm-perf.c:61:25: warning: symbol 'format_attr_contextid' was not declared. Should it be static? This symbol is not used outside of coresight-etm-perf.c, so this commit marks it static. Link: https://lore.kernel.org/r/20210308123250.2417947-1-weiyongjun1@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Sai Prakash Ranjan authored
Add ETM PID for Cortex-A78 to the list of supported ETMs. Link: https://lore.kernel.org/r/20210213112829.26834-1-saiprakash.ranjan@codeaurora.orgReviewed-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.13 - Updates: - Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and bcm-ns-usb3 bindings - Mediatek dsi and hdmi phy updates - TI j721e-wiz updates for AM64 - Cadence-torrent phy updates for SGMII/QSGMII - New support: - usb3-dp phy for Qualcomm SM8250 - UTMI phy for Armada CP110 - USB phy for Qualcomm SC7280 - Binding and driver for Sparx5 ethernet serdes * tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (75 commits) phy: fix resource_size.cocci warnings phy: Sparx5 Eth SerDes: Use direct register operations phy: hisilicon: Use the correct HiSilicon copyright phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON phy: qcom-qmp: add support for sm8250-usb3-dp phy phy: qcom-qmp: rename common registers phy: qcom-qmp: move DP functions to callbacks dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250 dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMII dt-bindings: phy: fix dt_binding_check warning in mediatek, ufs-phy.yaml phy: zynqmp: Handle the clock enable/disable properly dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5 phy: cadence-torrent: Add delay for PIPE clock to be stable phy: cadence-torrent: Explicitly request exclusive reset control phy: cadence-torrent: Do not configure SERDES if it's already configured phy: cadence-torrent: Group reset APIs and clock APIs phy: ti: j721e-wiz: Do not configure wiz if its already configured ...
-
Greg Kroah-Hartman authored
Merge tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.13-rc1 Updates for v5.13-rc1 are: Core: - Ability to add quirks for masters - static checker cleanup for bus code Drivers: - DMI quirks for Intel controllers - static checker cleanup for drivers - add auto enumeration support qcom controller * tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits) soundwire: intel_init: test link->cdns soundwire: qcom: handle return correctly in qcom_swrm_transport_params soundwire: qcom: cleanup internal port config indexing soundwire: qcom: wait for fifo space to be available before read/write soundwire: qcom: add static port map support soundwire: qcom: update port map allocation bit mask soundwire: add static port mapping support soundwire: stream: fix memory leak in stream config error path soundwire: qcom: use signed variable for error return soundwire: qcom: wait for enumeration to be complete in probe soundwire: qcom: add auto enumeration support soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add soundwire: qcom: add support to new interrupts soundwire: qcom: update register read/write routine soundwire: qcom: start the clock during initialization soundwire: qcom: set continue execution flag for ignored commands soundwire: qcom: add support to missing transport params dt-bindings: soundwire: qcom: clarify data port bus parameters soundwire: cadence: only prepare attached devices on clock stop soundwire: generic_allocation: fix confusion between group and packing ...
-
- 06 Apr, 2021 13 commits
-
-
kernel test robot authored
drivers/phy/microchip/sparx5_serdes.c:2440:54-57: ERROR: Missing resource_size with iores Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Fixes: 2ff8a1ee ("phy: Add Sparx5 ethernet serdes PHY driver") CC: Steen Hegelund <steen.hegelund@microchip.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org>
-
Steen Hegelund authored
Use direct register operations instead of a table of register information to lower the stack usage. Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Reported-by:
-
Hao Fang authored
s/Hisilicon/HiSilicon/g. It should use capital S, according to the official website. Signed-off-by:
Hao Fang <fanghao11@huawei.com> Link: https://lore.kernel.org/r/1617278537-26102-1-git-send-email-fanghao11@huawei.comSigned-off-by:
-
Randy Dunlap authored
When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi suffers a build error due to a missing interface that is provided by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON. ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe': phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210401210045.23525-1-rdunlap@infradead.orgSigned-off-by:
-
Bard Liao authored
intel_link_probe() could return error and dev_get_drvdata() will return null in such case. So we have to test link->cdns after link->cdns = dev_get_drvdata(&ldev->auxdev.dev); Otherwise, we will meet the "kernel NULL pointer dereference" error. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210406010101.11442-1-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Srinivas Kandagatla authored
Looks like return from reg_write is set but not checked. Fix this by adding error return path. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1503591 ("UNUSED_VALUE") Fixes: 128eaf93 ("soundwire: qcom: add support to missing transport params") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210401091502.15825-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
Internally used portconfig array for storing port bandwidth params starts from offset zero. However port zero is not really used and we also copy the bus parameters to offset zero. So basically we endup with a code which has to subtract 1 from port number to get to port parameters. This is bit confusing to the reader so, make this bit more obvious by only copying the parameters to offset 1 instead of zero. This will avoid doing -1 every time when we try to get port params. Similar thing has been recently done with din/dout_port_mask. Signed-off-by:
-
Srinivas Kandagatla authored
If we write registers very fast we can endup in a situation where some of the writes will be dropped without any notice. So wait for the fifo space to be available before reading/writing the soundwire registers. Signed-off-by:
-
Srinivas Kandagatla authored
SoundWire device ports are statically mapped to Controller ports during design. Add support to read these from SoundWire devices. This controller uses static port map info to setup bandwidth parameters for those ports. A generic port allocation is not possible in this cases! Signed-off-by:
-
Srinivas Kandagatla authored
currently the internal bitmask used for allocating ports starts with offset 0. This is bit confusing as data port numbers on Qualcomm controller are valid from 1 to 14. So adjust this bit mask accordingly, this will also help while adding static port map support. Signed-off-by:
-
Srinivas Kandagatla authored
Some of the SoundWire device ports are statically mapped to Controller ports during design, however there is no way to expose this information to the controller. Controllers like Qualcomm ones use this info to setup static bandwidth parameters for those ports. A generic port allocation is not possible in this cases! So this patch adds a new member m_port_map to struct sdw_slave to expose this static map. Signed-off-by:
-
Rander Wang authored
When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. Fixes: 89e59053 ("soundwire: Add support for SoundWire stream management") Signed-off-by:
Keyon Jie <yang.jie@intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
-
Russ Weight authored
This patch adds the approved PCI Express Device IDs for the PF and VF for the card for D5005 PAC cards. Signed-off-by:
Russ Weight <russell.h.weight@intel.com> Signed-off-by:
Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by:
-
- 05 Apr, 2021 4 commits
-
-
Gustavo Pimentel authored
This patch describes the sysfs interface implemented on the dw-xdata-pcie driver. Signed-off-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/438c4ca9f6cc9e1cb29a65c0d2cca9a3d3f181b1.1617016509.git.gustavo.pimentel@synopsys.comSigned-off-by:
-
Gustavo Pimentel authored
Add Synopsys xData IP driver maintainer. This driver aims to support Synopsys xData IP and is normally distributed along with Synopsys PCIe EndPoint IP as a PCIe traffic generator (depends of the use and licensing agreement). Signed-off-by:
-
Gustavo Pimentel authored
Add Documentation for dw-xdata-pcie driver. Signed-off-by:
-
Gustavo Pimentel authored
Add Synopsys DesignWare xData IP driver. This driver enables/disables the PCI traffic generator module pertain to the Synopsys DesignWare prototype. Signed-off-by:
-
