- 10 Aug, 2024 18 commits
-
-
Gal Pressman authored
In case of errors in set ringparams, reflect it through extack instead of a dmesg print. While at it, make the messages more human friendly and remove two redundant checks that are already validated by the core. Signed-off-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240808055927.2059700-7-tariqt@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Gal Pressman authored
Use the bitmap operations when accessing the advertised/supported link modes and remove places that access them as arrays of unsigned longs (underlying implementation of the bitmap), this makes the code much more readable and clear. Signed-off-by:
Carolina Jubran <cjubran@nvidia.com> Signed-off-by:
-
Jianbo Liu authored
Firmware has the limitation that it cannot offload a rule with rewrite and mirror to internal and external destinations simultaneously. This patch adds a workaround to this issue. Here the destination array is split again, just like what's done in previous commit, but after the action indexed by split_count - 1. An extra rule is added for the leftover destinations. Such rule can be offloaded, even there are destinations to both internal and external destinations, because the header rewrite is left in the original FTE. Signed-off-by:
Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by:
-
Jianbo Liu authored
To offload the encap rule when the tunnel IP is configured on an openvswitch internal port, driver need to overwrite vport metadata in reg_c0 to the value assigned to the internal port, then forward packets to root table to be processed again by the rules matching on the metadata for such internal port. When such rule is combined with header rewrite and mirror, openvswitch generates the rule like the following, because it resets mirror after packets are modified. in_port(enp8s0f0npf0sf1),.., actions:enp8s0f0npf0sf2,set(tunnel(...)),set(ipv4(...)),vxlan_sys_4789,enp8s0f0npf0sf2 The split_count was introduced before to support rewrite and mirror. Driver splits the rule into two different hardware rules in order to offload it. But it's not enough to offload the above complicated rule because of the limitations, in both driver and firmware. To resolve this issue, the destination array is split again after the destination indexed by split_count. An extra rule is added for the leftover destinations (in the above example, it is enp8s0f0npf0sf2), and is inserted to post_act table. And the extra destination is added in the original rule to forward to post_act table, so the extra mirror is done there. Signed-off-by: -
Jianbo Liu authored
In the commit a2a73ea1 ("net/mlx5e: Don't listen to remove flows event"), remove_flow_enable event is removed, and the hard limit usually relies on software mechanism added in commit b2f7b01d ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality"). But the delayed work is rescheduled every one second, which is slow for fast traffic. As a result, traffic can't be blocked even reaches the hard limit, which usually happens when soft and hard limits are very close. In reality it won't happen because soft limit is much lower than hard limit. But, as an optimization for RX to block traffic when reaching hard limit, need to set remove_flow_enable. When remove flow is enabled, IPSEC HARD_LIFETIME ASO syndrome will be set in the metadata defined in the ASO return register if packets reach hard lifetime threshold. And those packets are dropped immediately by the steering table. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Chris Mi authored
Currently MLX5E_TC_MAX_INT_PORT_NUM is 8. Usually int port has one ingress and one egress rules. But sometimes, a temporary rule can be offloaded as well, eg: recirc_id(0),in_port(br-phy),eth(src=10:70:fd:87:57:c0,dst=33:33:00:00:00:16), eth_type(0x86dd),ipv6(frag=no), packets:2, bytes:180, used:0.060s, actions:enp8s0f0 If one int port device offloads 3 rules, only 2 devices can offload. Other devices will hit the limit and fail to offload. Actually it is insufficient for customers. So increase the number to 32. Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Rosen Penev authored
f1294617 removed the custom function for ndo_eth_ioctl and used the standard phy_do_ioctl which calls phy_mii_ioctl. However since then, this driver was ported to phylink where it makes more sense to call phylink_mii_ioctl. Bring back custom function that calls phylink_mii_ioctl. Signed-off-by:
Rosen Penev <rosenp@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240807215834.33980-1-rosenp@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Nick Child says: ==================== ibmvnic: ibmvnic rr patchset v1 - https://lore.kernel.org/netdev/20240801212340.132607-1-nnac123@linux.ibm.com/ v2 - https://lore.kernel.org/netdev/20240806193706.998148-1-nnac123@linux.ibm.com/ ==================== Link: https://patch.msgid.link/20240807211809.1259563-1-nnac123@linux.ibm.comSigned-off-by:
-
Nick Child authored
During initialization with the vnic server, a bitstring is communicated to the client regarding header info needed during CSO (See "VNIC Capabilities" in PAPR). Most of the time, to be safe, vnic server requests header info for CSO. When header info is needed, multiple TX descriptors are required per skb; This limits the driver to use send_subcrq_indirect instead of send_subcrq_direct. Previously, the vnic server request for header info was ignored. This allowed the use of send_sub_crq_direct. Transmissions were successful because the bitstring returned by vnic server is broad and over cautionary. It was observed that mlx backing devices could actually transmit and handle CSO packets without the vnic server receiving header info (despite the fact that the bitstring requested it). There was a trust issue: The bitstring was overcautionary. This extra precaution (requesting header info when the backing device may not use it) comes at the cost of performance (using direct vs indirect hcalls has a 30% delta in small packet RR transaction rate). So it has been requested that the vnic server team tries to ensure that the bitstring is more exact. In the meantime, disable CSO when it is possible to use the skb in the send_subcrq_direct path. In other words, calculate the checksum before handing the packet to FW when the packet is not segmented and xmit_more is false. Since the code path is only possible if the skb is non GSO and xmit_more is false, the cost of doing checksum in the send_subcrq_direct path is minimal. Any large segmented skb will have xmit_more set to true more frequently and it is inexpensive to do checksumming on a small skb. The worst-case workload would be a 9000 MTU TCP_RR test with close to MTU sized packets (and TSO off). This allows xmit_more to be false more frequently and open the code path up to use send_subcrq_direct. Observing trace data (graph-time = 1) and packet rate with this workload shows minimal performance degradation: 1. NIC does checksum w headers, safely use send_subcrq_indirect: - Packet rate: 631k txs - Trace data: ibmvnic_xmit = 44344685.87 us / 6234576 hits = AVG 7.11 us skb_checksum_help = 4.07 us / 2 hits = AVG 2.04 us ^ Notice hits, tracing this just for reassurance ibmvnic_tx_scrq_flush = 33040649.69 us / 5638441 hits = AVG 5.86 us send_subcrq_indirect = 37438922.24 us / 6030859 hits = AVG 6.21 us 2. NIC does checksum w/o headers, dangerously use send_subcrq_direct: - Packet rate: 831k txs - Trace data: ibmvnic_xmit = 48940092.29 us / 8187630 hits = AVG 5.98 us skb_checksum_help = 2.03 us / 1 hits = AVG 2.03 ibmvnic_tx_scrq_flush = 31141879.57 us / 7948960 hits = AVG 3.92 us send_subcrq_indirect = 8412506.03 us / 728781 hits = AVG 11.54 ^ notice hits is much lower b/c send_subcrq_direct was called ^ wasn't traceable 3. driver does checksum, safely use send_subcrq_direct (THIS PATCH): - Packet rate: 829k txs - Trace data: ibmvnic_xmit = 56696077.63 us / 8066168 hits = AVG 7.03 us skb_checksum_help = 8587456.16 us / 7526072 hits = AVG 1.14 us ibmvnic_tx_scrq_flush = 30219545.55 us / 7782409 hits = AVG 3.88 us send_subcrq_indirect = 8638326.44 us / 763693 hits = AVG 11.31 us When the bitstring ever specifies that CSO does not require headers (dependent on VIOS vnic server changes), then this patch should be removed and replaced with one that investigates the bitstring before using send_subcrq_direct. Signed-off-by:Nick Child <nnac123@linux.ibm.com> Link: https://patch.msgid.link/20240807211809.1259563-8-nnac123@linux.ibm.comSigned-off-by:
-
Nick Child authored
Byte Queue Limits depends on dql_completed being called once per tx completion round in order to adjust its algorithm appropriately. The dql->limit value is an approximation of the amount of bytes that the NIC can consume per irq interval. If this approximation is too high then the NIC will become over-saturated. Too low and the NIC will starve. The dql->limit depends on dql->prev-* stats to calculate an optimal value. If dql_completed() is called more than once per irq handler then those prev-* values become unreliable (because they are not an accurate representation of the previous state of the NIC) resulting in a sub-optimal limit value. Therefore, move the call to netdev_tx_completed_queue() to the end of ibmvnic_complete_tx(). When performing 150 sessions of TCP rr (request-response 1 byte packets) workloads, one could observe: PREVIOUSLY: - limit and inflight values hovering around 130 - transaction rate of around 750k pps. NOW: - limit rises and falls in response to inflight (130-900) - transaction rate of around 1M pps (33% improvement) Signed-off-by: -
Nick Child authored
Firmware supports two hcalls to send a sub-crq request: H_SEND_SUB_CRQ_INDIRECT and H_SEND_SUB_CRQ. The indirect hcall allows for submission of batched messages while the other hcall is limited to only one message. This protocol is defined in PAPR section 17.2.3.3. Previously, the ibmvnic xmit function only used the indirect hcall. This allowed the driver to batch it's skbs. A single skb can occupy a few entries per hcall depending on if FW requires skb header information or not. The FW only needs header information if the packet is segmented. By this logic, if an skb is not GSO then it can fit in one sub-crq message and therefore is a candidate for H_SEND_SUB_CRQ. Batching skb transmission is only useful when there are more packets coming down the line (ie netdev_xmit_more is true). As it turns out, H_SEND_SUB_CRQ induces less latency than H_SEND_SUB_CRQ_INDIRECT. Therefore, use H_SEND_SUB_CRQ where appropriate. Small latency gains seen when doing TCP_RR_150 (request/response workload). Ftrace results (graph-time=1): Previous: ibmvnic_xmit = 29618270.83 us / 8860058.0 hits = AVG 3.34 ibmvnic_tx_scrq_flush = 21972231.02 us / 6553972.0 hits = AVG 3.35 Now: ibmvnic_xmit = 22153350.96 us / 8438942.0 hits = AVG 2.63 ibmvnic_tx_scrq_flush = 15858922.4 us / 6244076.0 hits = AVG 2.54 Signed-off-by: -
Nick Child authored
send_subcrq_[in]direct() already has a dma memory barrier. Remove the earlier one. Signed-off-by:
-
Nick Child authored
Previously when creating the header descriptors, the driver would: 1. allocate a temporary buffer on the stack (in build_hdr_descs_arr) 2. memcpy the header info into the temporary buffer (in build_hdr_data) 3. memcpy the temp buffer into a local variable (in create_hdr_descs) 4. copy the local variable into the return buffer (in create_hdr_descs) Since, there is no opportunity for errors during this process, the temp buffer is not needed and work can be done on the return buffer directly. Repurpose build_hdr_data() to only calculate the header lengths. Rename it to get_hdr_lens(). Edit create_hdr_descs() to read from the skb directly and copy directly into the returned useful buffer. The process now involves less memory and write operations while also being more readable. Signed-off-by:
-
Nick Child authored
Use the header length helper functions rather than trying to calculate it within the driver. There are defined functions for mac and network headers (skb_mac_header_len and skb_network_header_len) but no such function exists for the transport header length. Also, hdr_data was memset during allocation to all 0's so no need to memset again. Signed-off-by:
-
Nick Child authored
Previously, the driver would replenish the rx pool if the polling function consumed less than the budget. The logic being that the driver did not exhaust its budget so that must mean that the driver is not busy and has cycles to spare for replenishing the pool. So pool replenishment happens on every poll which did not consume the budget. This can very costly during request-response tests. In fact, an extra ~100pps can be seen in TCP_RR_150 tests when we remove this conditional. Trace results (ftrace, graph-time=1) for the poll function are below: Previous results: ibmvnic_poll = 64951846.0 us / 4167628.0 hits = AVG 15.58 replenish_rx_pool = 17602846.0 us / 4710437.0 hits = AVG 3.74 Now: ibmvnic_poll = 57673941.0 us / 4791737.0 hits = AVG 12.04 replenish_rx_pool = 3938171.6 us / 4314.0 hits = AVG 912.88 While the replenish function takes longer, it is hit less frequently meaning the ibmvnic_poll function, on average, is faster. Furthermore, this change does not have a negative effect on performance bandwidth/latency measurements. Signed-off-by: -
Christophe Leroy authored
Building fs_enet on powerpc e500 leads to following warning: CC drivers/net/ethernet/freescale/fs_enet/mac-scc.o In file included from ./include/linux/build_bug.h:5, from ./include/linux/container_of.h:5, from ./include/linux/list.h:5, from ./include/linux/module.h:12, from drivers/net/ethernet/freescale/fs_enet/mac-scc.c:15: drivers/net/ethernet/freescale/fs_enet/mac-scc.c: In function 'allocate_bd': ./include/linux/err.h:28:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 28 | #define IS_ERR_VALUE(x) unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO) | ^ ./include/linux/compiler.h:77:45: note: in definition of macro 'unlikely' 77 | # define unlikely(x) __builtin_expect(!!(x), 0) | ^ drivers/net/ethernet/freescale/fs_enet/mac-scc.c:138:13: note: in expansion of macro 'IS_ERR_VALUE' 138 | if (IS_ERR_VALUE(fep->ring_mem_addr)) | ^~~~~~~~~~~~ This is due to fep->ring_mem_addr not being a pointer but a DMA address which is 64 bits on that platform while pointers are 32 bits as this is a 32 bits platform with wider physical bus. However, using fep->ring_mem_addr is just wrong because cpm_muram_alloc() returns an offset within the muram and not a physical address directly. So use fpi->dpram_offset instead. Signed-off-by:Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/ec67ea3a3bef7e58b8dc959f7c17d405af0d27e4.1723101144.git.christophe.leroy@csgroup.euSigned-off-by:
-
zhangxiangqian authored
The usbnet_link_change function is not called, if the link has not changed. ... [16913.807393][ 3] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped [16913.822266][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped [16913.826296][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 11 may have been dropped ... kevent 11 is scheduled too frequently and may affect other event schedules. Signed-off-by:
zhangxiangqian <zhangxiangqian@kylinos.cn> Acked-by:
Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/1723109985-11996-1-git-send-email-zhangxiangqian@kylinos.cnSigned-off-by:
-
Mina Almasry authored
Currently ethtool_set_channel calls separate functions to check whether the new channel number violates rss configuration or flow steering configuration. Very soon we need to check whether the new channel number violates memory provider configuration as well. To do all 3 checks cleanly, add a wrapper around ethtool_get_max_rxnfc_channel() and ethtool_get_max_rxfh_channel(), which does both checks. We can later extend this wrapper to add the memory provider check in one place. Note that in the current code, we put a descriptive genl error message when we run into issues. To preserve the error message, we pass the genl_info* to the common helper. The ioctl calls can pass NULL instead. Suggested-by:
Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20240808205345.2141858-1-almasrymina@google.comSigned-off-by:
-
- 09 Aug, 2024 11 commits
-
-
David S. Miller authored
Allison Henderson says: ==================== selftests: rds selftest This series is a new selftest that Vegard, Chuck and myself have been working on to provide some test coverage for rds. I've modified the scripts to include the feedback from the last version, but let me know if there's anything missed. Questions and comments appreciated. Thanks everyone! Allison Changes in v2: - Removed qemu vm creation and related code - Updated README.txt with examples of running the test with virtme - Removed init.sh. run.sh now directly calls test.py - Some clean up done with the return code handling since there is no vm between the scripts anymore - Imported ip python function in tools/testing/selftests/net/lib/py/utils.py into test.py - Adapted test.py to use the imported ip function, and removed the local ip wrapper - Some line wrap clean up - Link to v1: https://lore.kernel.org/netdev/20240626012834.5678-3-allison.henderson@oracle.com/T ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vegard Nossum authored
This adds some basic self-testing infrastructure for RDS-TCP. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Signed-off-by:
-
Vegard Nossum authored
To better our unit tests we need code coverage to be part of the kernel. This patch borrows heavily from how CONFIG_GCOV_PROFILE_FTRACE is implemented Reviewed-by:
-
Vegard Nossum authored
These files contain the runtime coverage data generated by gcov. Signed-off-by:
-
Simon Horman authored
Jiri Slaby advises me that the preferred mechanism for declaring string constants is static char arrays, so use that here. This mostly reverts commit 1692b977 ("net: stmmac: xgmac: use #define for string constants") That commit was a fix for commit 46eba193 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels"). The fix being replacing const char * with #defines in order to address compilation failures observed on GCC 6 through 10. Compile tested only. No functional change intended. Suggested-by:
Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/netdev/485dbc5a-a04b-40c2-9481-955eaa5ce2e2@kernel.org/Signed-off-by:
-
Pawel Dembicki authored
This commit changes magic numbers in phy operations. Some shifted registers was replaced with bitfield macros. No functional changes done. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by:
-
Matthias Schiffer authored
Allow of_find_net_device_by_node() to find icssg_prueth ports and make the individual ports' of_nodes available in sysfs. Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by:
MD Danish Anwar <danishanwar@ti.com> Reviewed-by:
-
Christophe JAILLET authored
'struct mii_phy_def' are not modified in this driver. Constifying these structures moves some data to a read-only section, so increase overall security. While at it fix the checkpatch warning related to this patch (some missing newlines and spaces around *) On a x86_64, with allmodconfig: Before: ====== 27709 928 0 28637 6fdd drivers/net/sungem_phy.o After: ===== text data bss dec hex filename 28157 476 0 28633 6fd9 drivers/net/sungem_phy.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Edward Cree authored
A value of 1 doesn't make sense, as it implies the only allowed context ID is 0, which is reserved for the default context - in which case the driver should just not claim to support custom RSS contexts at all. Suggested-by:
Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/c07725b3a3d0b0a63b85e230f9c77af59d4d07f8.1723045898.git.ecree.xilinx@gmail.comSigned-off-by:
-
Rosen Penev authored
Allows simplifying get_strings and avoids manual pointer manipulation. Signed-off-by:
Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240807190303.6143-1-rosenp@gmail.comSigned-off-by:
-
Simon Horman authored
Provide declaration of dmae_reg_go_c in header. This symbol is defined in bnx2x_main.c. And used in that file and bnx2x_stats.c. However, Sparse complains that there is no declaration of the symbol in dmae_reg_go_c nor is the symbol static. .../bnx2x_main.c:291:11: warning: symbol 'dmae_reg_go_c' was not declared. Should it be static? Address this by moving the declaration from bnx2x_stats.c to bnx2x_reg.h. No functional change intended. Compile tested only. Signed-off-by:
-
- 08 Aug, 2024 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Link: https://patch.msgid.link/20240808170148.3629934-1-kuba@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth. Current release - regressions: - eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on older chips Current release - new code bugs: - ethtool: fix off-by-one error / kdoc contradicting the code for max RSS context IDs - Bluetooth: hci_qca: - QCA6390: fix support on non-DT platforms - QCA6390: don't call pwrseq_power_off() twice - fix a NULL-pointer derefence at shutdown - eth: ice: fix incorrect assigns of FEC counters Previous releases - regressions: - mptcp: fix handling endpoints with both 'signal' and 'subflow' flags set - virtio-net: fix changing ring count when vq IRQ coalescing not supported - eth: gve: fix use of netif_carrier_ok() during reconfig / reset Previous releases - always broken: - eth: idpf: fix bugs in queue re-allocation on reconfig / reset - ethtool: fix context creation with no parameters Misc: - linkwatch: use system_unbound_wq to ease RTNL contention" * tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits) net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897. ethtool: Fix context creation with no parameters net: ethtool: fix off-by-one error in max RSS context IDs net: pse-pd: tps23881: include missing bitfield.h header net: fec: Stop PPS on driver remove net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities l2tp: fix lockdep splat net: stmmac: dwmac4: fix PCS duplex mode decode idpf: fix UAFs when destroying the queues idpf: fix memleak in vport interrupt configuration idpf: fix memory leaks and crashes while performing a soft reset bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() net/smc: add the max value of fallback reason count Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ice: Fix incorrect assigns of FEC counts ... -
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Have reading of event format files test if the metadata still exists. When a event is freed, a flag (EVENT_FILE_FL_FREED) in the metadata is set to state that it is to prevent any new references to it from happening while waiting for existing references to close. When the last reference closes, the metadata is freed. But the "format" was missing a check to this flag (along with some other files) that allowed new references to happen, and a use-after-free bug to occur. - Have the trace event meta data use the refcount infrastructure instead of relying on its own atomic counters. - Have tracefs inodes use alloc_inode_sb() for allocation instead of using kmem_cache_alloc() directly. - Have eventfs_create_dir() return an ERR_PTR instead of NULL as the callers expect a real object or an ERR_PTR. - Have release_ei() use call_srcu() and not call_rcu() as all the protection is on SRCU and not RCU. - Fix ftrace_graph_ret_addr() to use the task passed in and not current. - Fix overflow bug in get_free_elt() where the counter can overflow the integer and cause an infinite loop. - Remove unused function ring_buffer_nr_pages() - Have tracefs freeing use the inode RCU infrastructure instead of creating its own. When the kernel had randomize structure fields enabled, the rcu field of the tracefs_inode was overlapping the rcu field of the inode structure, and corrupting it. Instead, use the destroy_inode() callback to do the initial cleanup of the code, and then have free_inode() free it. * tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracefs: Use generic inode RCU for synchronizing freeing ring-buffer: Remove unused function ring_buffer_nr_pages() tracing: Fix overflow in get_free_elt() function_graph: Fix the ret_stack used by ftrace_graph_ret_addr() eventfs: Use SRCU for freeing eventfs_inodes eventfs: Don't return NULL in eventfs_create_dir() tracefs: Fix inode allocation tracing: Use refcount for trace_event_file reference counter tracing: Have format file honor EVENT_FILE_FL_FREED
-
git://evilpiepirate.org/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Assorted little stuff: - lockdep fixup for lockdep_set_notrack_class() - we can now remove a device when using erasure coding without deadlocking, though we still hit other issues - the 'allocator stuck' timeout is now configurable, and messages are ratelimited. The default timeout has been increased from 10 seconds to 30" * tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs: bcachefs: Use bch2_wait_on_allocator() in btree node alloc path bcachefs: Make allocator stuck timeout configurable, ratelimit messages bcachefs: Add missing path_traverse() to btree_iter_next_node() bcachefs: ec should not allocate from ro devs bcachefs: Improved allocator debugging for ec bcachefs: Add missing bch2_trans_begin() call bcachefs: Add a comment for bucket helper types bcachefs: Don't rely on implicit unsigned -> signed integer conversion lockdep: Fix lockdep_set_notrack_class() for CONFIG_LOCK_STAT bcachefs: Fix double free of ca->buckets_nouse -
Linus Torvalds authored
Russell King reported that the arm cbc(aes) crypto module hangs when loaded, and Herbert Xu bisected it to commit 9b9879fc ("modules: catch concurrent module loads, treat them as idempotent"), and noted: "So what's happening here is that the first modprobe tries to load a fallback CBC implementation, in doing so it triggers a load of the exact same module due to module aliases. IOW we're loading aes-arm-bs which provides cbc(aes). However, this needs a fallback of cbc(aes) to operate, which is made out of the generic cbc module + any implementation of aes, or ecb(aes). The latter happens to also be provided by aes-arm-cb so that's why it tries to load the same module again" So loading the aes-arm-bs module ends up wanting to recursively load itself, and the recursive load then ends up waiting for the original module load to complete. This is a regression, in that it used to be that we just tried to load the module multiple times, and then as we went on to install it the second time we would instead just error out because the module name already existed. That is actually also exactly what the original "catch concurrent loads" patch did in commit 9828ed3f ("module: error out early on concurrent load of the same module file"), but it turns out that it ends up being racy, in that erroring out before the module has been fully initialized will cause failures in dependent module loading. See commit ac2263b5 (which was the revert of that "error out early") commit for details about why erroring out before the module has been initialized is actually fundamentally racy. Now, for the actual recursive module load (as opposed to just concurrently loading the same module twice), the race is not an issue. At the same time it's hard for the kernel to see that this is recursion, because the module load is always done from a usermode helper, so the recursion is not some simple callchain within the kernel. End result: this is not the real fix, but this at least adds a warning for the situation (admittedly much too late for all the debugging pain that Russell and Herbert went through) and if we can come to a resolution on how to detect the recursion properly, this re-organizes the code to make that easier. Link: https://lore.kernel.org/all/ZrFHLqvFqhzykuYw@shell.armlinux.org.uk/Reported-by:
Russell King <linux@armlinux.org.uk> Debugged-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Enable general EFI poweroff method to make poweroff usable on hardwares which lack ACPI S5, use accessors to page table entries instead of direct dereference to avoid potential problems, and two trivial kvm cleanups" * tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Remove undefined a6 argument comment for kvm_hypercall() LoongArch: KVM: Remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS LoongArch: Use accessors to page table entries instead of direct dereference LoongArch: Enable general EFI poweroff method
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-07 (ice) This series contains updates to ice driver only. Grzegorz adds IRQ synchronization call before performing reset and prevents writing to hardware when it is resetting. Mateusz swaps incorrect assignment of FEC statistics. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix incorrect assigns of FEC counts ice: Skip PTP HW writes during PTP reset procedure ice: Fix reset handler ==================== Link: https://patch.msgid.link/20240807224521.3819189-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Martin Whitaker authored
As noted in the device errata [1-8], EEE support is not fully operational in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing link drops when connected to another device that supports EEE. The patch series "net: add EEE support for KSZ9477 switch family" merged in commit 9b0bf4f7 caused EEE support to be enabled in these devices. A fix for this regression for the KSZ9477 alone was merged in commit 08c6d8ba. This patch extends this fix to the other affected devices. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567R-Errata-DS80000752.pdf [2] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567S-Errata-DS80000753.pdf [3] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf [4] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567R-Errata-DS80000755.pdf [5] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567S-Errata-DS80000756.pdf [6] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9896C-Errata-DS80000757.pdf [7] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf [8] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897S-Errata-DS80000759.pdf Fixes: 69d3b36c ("net: dsa: microchip: enable EEE support") # for KSZ8567/KSZ9567/KSZ9896/KSZ9897 Link: https://lore.kernel.org/netdev/137ce1ee-0b68-4c96-a717-c8164b514eec@martin-whitaker.me.uk/Signed-off-by:
Martin Whitaker <foss@martin-whitaker.me.uk> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Lukasz Majewski <lukma@denx.de> Link: https://patch.msgid.link/20240807205209.21464-1-foss@martin-whitaker.me.ukSigned-off-by:
-
Gal Pressman authored
The 'at least one change' requirement is not applicable for context creation, skip the check in such case. This allows a command such as 'ethtool -X eth0 context new' to work. The command works by mistake when using older versions of userspace ethtool due to an incompatibility issue where rxfh.input_xfrm is passed as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent userspace. This patch does not try to solve the incompatibility issue. Link: https://lore.kernel.org/netdev/05ae8316-d3aa-4356-98c6-55ed4253c8a7@nvidia.com/ Fixes: 84a1d9c4 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches") Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
-
Edward Cree authored
Both ethtool_ops.rxfh_max_context_id and the default value used when it's not specified are supposed to be exclusive maxima (the former is documented as such; the latter, U32_MAX, cannot be used as an ID since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an inclusive maximum. Subtract one from 'limit' to produce an inclusive maximum, and pass that to xa_alloc(). Increase bnxt's max by one to prevent a (very minor) regression, as BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a leftover from old driver code that managed context IDs itself. Rename rxfh_max_context_id to rxfh_max_num_contexts to make its semantics (hopefully) more obvious. Fixes: 847a8ab1 ("net: ethtool: let the core choose RSS context IDs") Signed-off-by:
-
Arnd Bergmann authored
Using FIELD_GET() fails in configurations that don't already include the header file indirectly: drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe': drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration] 755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) { | ^~~~~~~~~ Fixes: 89108cb5 ("net: pse-pd: tps23881: Fix the device ID check") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
-
