- 23 Sep, 2004 3 commits
-
-
Bartlomiej Zolnierkiewicz authored
From: Brett Russ <russb@emc.com> The following code needs to be added to ide_end_drive_cmd(), since ide_error() calls ide_end_drive_cmd() after ide_dump_status() has left the registers pointing at the high order part of the LBA. Using the taskfile ioctl will then lead to hobRegister[] and subsequently hob_ports[] being loaded with the wrong values. Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
Bartlomiej Zolnierkiewicz authored
into trik.(none):/home/bzolnier/bk/ide-2.6
-
Bartlomiej Zolnierkiewicz authored
From: Nicholas Reilly <nreilly@magma.ca> I have a Shuttle SN41G2 and the secondary IDE channel alternates between IRQ 15 (correct) and IRQ 7 (causing failures accessing the DVD+-RW which is master, no slave and also messing with the parallel port if it is enabled) on each boot. This is running ACPI and APIC on 2.6.5, 2.6.7 and 2.6.8. dmesg, dmidecode and /proc/acpi/dsdt are all identical (apart from dmesg printing of IRQ and errors it causes) regardless of whether it decides to go on 7 or 15. It is now running the latest BIOS, earlier BIOS did the same. bart: IRQ auto-detection sometimes fails and gets "screaming" IRQ Signed-off-by:
-
- 22 Sep, 2004 37 commits
-
-
Bartlomiej Zolnierkiewicz authored
It is always equal to zero. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Signed-off-by: -
Richard Henderson authored
into kanga.twiddle.home:/home/rth/work/linux/axp-2.6
-
Richard Henderson authored
-
Benjamin Herrenschmidt authored
The adt746x driver currently adds a "°C" suffix to temperatures exposed via sysfs, and I don't like that. First, we all agree that any other unit here makes no sense (do we ? do we ? yes of course :) and I don't like having anything but numbers in there, and finally it's more consistent with what the g5 driver does. And finally, the _REAL_ reason is that this is not a low ASCII character and so has nothing to do in the kernel sources or in /sys :) Unfortunately, generating a patch here is nasty because of that (my mailer is rightfully complaining about the non-ASCII char on text import) so you might have to apply by hand... Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Nishanth Aravamudan authored
Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Nicolas Pitre authored
Signed-off-by:
-
Ingo Molnar authored
There is another (minor) bug that the smp_processor_id() debugger unearthed: diskstats_show() could do a disk_round_stats() -> disk_stat_add() with preemption enabled - possibly resulting in losing statistics updates. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Dominik Brodowski authored
fix ->cpuinfo.transition_latency for powernow-k7 Signed-off-by:
Bruno Ducrot <ducrot@poupinou.org> Signed-off-by:
Dominik Brodowski <linux@brodo.de> Signed-off-by:
-
Alasdair G. Kergon authored
From: Heinz Mauelshagen <mauelshagen@redhat.com> Make mirror log synchronization optional. Signed-off-by:
-
Alasdair G. Kergon authored
Rename EMIT macro to DMEMIT and move to header file. Signed-off-by:
-
Alasdair G. Kergon authored
Fix minor number allocation check: (1 << MINORBITS) is invalid. Signed-off-by:
-
Werner Almesberger authored
If setting the printk log buffer (with the boot command line option "log_buf_len") to a value that's not a power of two, the index calculations go wrong and yield confusing results. This patch rounds the size to the next higher power of two. It'll yield garbage for sizes > INT_MAX bytes. Signed-off-by:
Werner Almesberger <werner@almesberger.net> Signed-off-by:
-
Torben Mathiasen authored
- s/390 dasd moved to major 94. - s/390 VM/ESA moved to major 95. - INFTL moved to major 96. - Patch also adds Marvell MPSC low-density device to Minor 44 & 45 (Major 204). This one was in my queue. Signed-off-by:
-
Martin Schwidefsky authored
From: Steffen Thoss <thoss@de.ibm.com> From: Ursula Braun-Krahl <braunu@de.ibm.com> qeth network driver change: - Change misleading message about hardware ip fragmentation. - Include qeth_snmp_ureq_hdr structure in user copy in qeth_snmp_command. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
From: Horst Hummel <horst.hummel@de.ibm.com> dasd driver changes: - Add control unit types 0x2107 and 0x1750. Signed-off-by:
-
Martin Schwidefsky authored
s390 core changes: - Replace invoke_softirq mechanism with own version of do_softirq. - Move /proc/inteerrupts functions to re-added arch/s390/kernel/irq.c - Add some includes to avoid compiler warnings. - Remove unused #defines. - Regenerate default configuration. Signed-off-by:
-
Jesper Juhl authored
Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Denis Vlasenko authored
Stack usage is reduced from 268 to 120 bytes on i386. Signed-off-by:
-
Yoichi Yuasa authored
This change had fixed definition order of _sigchld about MIPS. Signed-off-by:
-
Mikael Pettersson authored
This patch fixes gcc-3.4 cast-as-lvalue warnings in the 2.6.9-rc2 kernel's Specialix RIO driver. This is a forward port of the fix I made for the 2.4 kernel. Signed-off-by:
-
Olaf Hering authored
make ARCH=ppc64 -j12 O=/dev/shm/R all fails, the linker script is not in the output directory. Signed-off-by:
-
Mikael Pettersson authored
This patch fixes gcc-3.4 cast-as-lvalue warnings in the 2.6.9-rc2 kernel's WANPIPE/SDLA net drivers. This is a forward port of the fix I made for the 2.4 kernel. Signed-off-by:
-
John Engel authored
Here's a patch to fix a bug in compat_sys_fcntl64 in fs/compat.c. The bug occurs with a 32 bit app that calls fcntl and checking for a lock near the end of a file. struct flock sflp; sflp.l_start = 2147483345; sflp.l_len = 302; /* 2147483345 + 302 == 2147483647 (this should not overflow 31 bits) */ /* 2^31 == 2147483648 */ fcntl_stat = fcntl(fd, F_GETLK, &sflp); The patch also contains a fix to handle l_len < 0 which is now defined in POSIX 1003.1-2001 from the fcntl man page. Signed-off-by:John Engel <jhe@us.ibm.com> Signed-off-by:
-
Yoichi Yuasa authored
This change had fixed undeclared identifier in arch/mips/vr41xx/common/giu.c Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Yoichi Yuasa authored
This change had fixed initialization error in arch/mips/vr41xx/common/icu.c Signed-off-by:
-
Yoichi Yuasa authored
UPF_RESOURCES isn't used now. Signed-off-by:
-
KaiGai Kohei authored
This attached patch adds list_replace_rcu() to include/linux/list.h for atomic updating operations according to RCU-model. void list_replace_rcu(struct list_head *old, struct list_head *new) The 'old' element is detached from the linked list, and the 'new' element is inserted to the same point of the linked list concurrently. This patch is necessary for the performance improvement of SELinux. See, http://lkml.org/lkml/2004/8/16/54 (Subject: RCU issue with SELinux) http://lkml.org/lkml/2004/8/30/63 (Subject: [PATCH]SELinux performance improvement by RCU) Signed-off-by:
KaiGai, Kohei <kaigai@ak.jp.nec.com> Signed-off-by:
-
Jeff Mahoney authored
reiserfs_set_xattr() explicitly updates the ctime for the host inode. This works for direct setfacl/setfattr calls, but for the more common case of an inherited default ACL, it breaks. The ACL is inherited in the middle of the new inode creation, before the inode has been hashed. When mark_inode_dirty is called, one of the checks bails out if the inode is unhashed -- but AFTER inode->i_state is updated, so the inode is marked dirty but never placed on any dirty list. Since the inode is never placed on a dirty list, __sync_single_inode from the writeback_inodes() path can never be called on it to clear the dirty flags. Once the inode is hashed and mark_inode_dirty is called for it again, it's too late -- it will bail early assuming (correctly) that the inode is already marked dirty. This ultimately results in I/O stalls that can't be resolved by the fs path, only be the memory allocation path that uses pages directly. The attached patch makes the update of the ctime conditional on the inode being hashed already. Signed-off-by:
-
Ryan Cumming authored
Signed-off-by:
-
Kirill Korotaev authored
This patch reaaranges inode_lock taking in writeback_inodes(). It narrows down use of inode_lock and removes unneccassary nesting of sb_lock and inode_lock. Instead of holding inode_lock for all the time I moved it around sync_sb_inodes() as it is in all other places. Signed-Off-By:
Kirill Korotaev <dev@sw.ru> Signed-off-by:
-
Kirill Korotaev authored
This patch fixes race in writeback_inodes() described below: writeback_inodes() { .... sb->s_count++; spin_unlock(&sb_lock); .... spin_lock(&sb_lock); if (__put_super(sb)) <<< X goto restart; } } deactivate_super() { fs->kill_sb(s); kill_block_super(sb) generic_shutdown_super(sb) spin_lock(&sb_lock); list_del(&sb->s_list); <<< Y spin_unlock(&sb_lock); .... put_super(s); spin_lock(&sb_lock); __put_super(sb); <<< Z spin_unlock(&sb_lock); } The problem with it is that writeback_inodes() supposes that if __put_super() returns 0 then no super block was deleted from the list and we can safely traverse sb list further. But as it is obvious from the deactivate_super() it's not actually true. because at point Y we delete super block from the list and drop the lock. We do __put_super() very much later... So we can find sb with poisoned sb->s_list at point X and we won't be the last sb reference holders. The last reference will be dropped in point Z. So in case of the following sequence of execution Y -> X -> Z we'll get an oops after point X in writeback_inodes(). This patch introduces __put_super_and_need_restart() function which allows safe traversing of sb list. I'll send a couple of patches later which remove O(n^2) algos and using this function. Signed-Off-By: -
Anil Keshavamurthy authored
I booted IA64 kernel with "maxcpus=" set to less than the total available processors in the system. Then I tried to online the CPU which was offline due to "maxcpus=" restirction. i.e when I tried to online the CPU which never was online at boot crashed the system. Signed-off-by:
Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
Stephen Rothwell authored
This patch supplies an device so that ibmvscsic will actually have its probe routine called and so allow ti to actually initialise on (legacy) iSeries machines. It also adds a device for the virtual console (for consistency only at the moment). Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Anton Blanchard authored
There have been reports of problems running UP ppc64 kernels where the kernel would die in the floating point save/restore code. It turns out kernel threads that call exec (and so become user tasks) do not have a valid thread.regs. This means init (pid 1) does not, it also means anything called out of exec_usermodehelper does not. Once that task has forked (eg init), then the thread.regs in the new task is correctly set. On UP do lazy save/restore of floating point regs. The SLES9 init is doing floating point (the debian version of init appears not to). The lack of thread.regs in init combined with the fact that it does floating point leads to our lazy FP save/restore code blowing up. There were other places where this problem exhibited itself in weird and interesting ways. If a task being exec'ed out of a kernel thread used more than 1MB of stack, it would be terminated due to the checks in arch/ppc64/mm/fault.c (looking for a valid thread.regs when extending the stack). We had a test case using the tux webserver that was failing due to this. Since we zero all registers in ELF_PLAT_INIT, I removed the extra memset in start_thread32. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Nishanth Aravamudan authored
Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by:
-
Nishanth Aravamudan authored
Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by:
-
