- 15 May, 2023 6 commits
-
-
Maíra Canal authored
Currently, the pixel conversion isn't rounding the fixed-point values before assigning it to the RGB coefficients, which is causing the IGT pixel-format tests to fail. So, use the drm_fixp2int_round() fixed-point helper to round the values when assigning it to the RGB coefficients. Tested with igt@kms_plane@pixel-format and igt@kms_plane@pixel-format-source-clamping. [v2]: * Use drm_fixp2int_round() to fix the pixel conversion instead of casting the values to s32 (Melissa Wen). Fixes: 89b03aea ("drm/vkms: fix 32bit compilation error by replacing macros") Signed-off-by:Maíra Canal <mcanal@igalia.com> Reviewed-by:
Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230512104044.65034-2-mcanal@igalia.com
-
Maíra Canal authored
Create a new fixed-point helper to allow us to return the rounded value of our fixed point value. [v2]: * Create the function drm_fixp2int_round() (Melissa Wen). [v3]: * Use drm_fixp2int() instead of shifting manually (Arthur Grillo). Signed-off-by: -
Shuijing Li authored
For "boe,tv105wum-nw0" this special panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Signed-off-by:
Shuijing Li <shuijing.li@mediatek.com> Signed-off-by:
Xinlei Lee <xinlei.lee@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-3-shuijing.li@mediatek.com
-
Shuijing Li authored
Reduce the delay after LCM reset by removing an extra delay in the initialization commands array. The required delay of at least 6ms after reset is guaranteed by boe_panel_prepare(). Signed-off-by:
-
Javier Martinez Canillas authored
This is a leftover from an early iteration of the driver when it was still named ssd1307 instead of ssd130x. Change it for consistency with the rest. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512120232.304603-1-javierm@redhat.com
-
Huacai Chen authored
Consider a configuration like this: 1, efifb (or simpledrm) is built-in; 2, a native display driver (such as radeon) is also built-in. As Javier said, this is not a common configuration (the native display driver is usually built as a module), but it can happen and cause some trouble. In this case, since efifb, radeon and sysfb are all in device_initcall() level, the order in practise is like this: efifb registered at first, but no "efi-framebuffer" device yet. radeon registered later, and /dev/fb0 created. sysfb_init() comes at last, it registers "efi-framebuffer" and then causes an error message "efifb: a framebuffer is already registered". Make sysfb_init() to be subsys_ initcall_sync() can avoid this. And Javier Martinez Canillas is trying to make a more general solution in commit 873eb3b1 ("fbdev: Disable sysfb device registration when removing conflicting FBs"). However, this patch still makes sense because it can make the screen display as early as possible (We cannot move to subsys_initcall, since sysfb_init() should be executed after PCI enumeration). Reviewed-by:
Huacai Chen <chenhuacai@loongson.cn> Signed-off-by:
-
- 11 May, 2023 5 commits
-
-
Liu Ying authored
Add BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel support. The panel has a LVDS display interface. The panel's product specification can be found at: http://www.onetech.com.tw/files/EV121WXM-N10-1850ProductSpecification_20180801.pdfSigned-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
Liu Ying authored
Add BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel compatible string. The panel has a LVDS display interface. The panel's product specification can be found at: http://www.onetech.com.tw/files/EV121WXM-N10-1850ProductSpecification_20180801.pdfAcked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Dmitry Baryshkov authored
Drop sharp_nt_panel_disable() and sharp_nt_panel_enable(), which bear no useful code. Also drop sharp_nt_panel::enable and sharp_nt_panel::mode fields which also provide no use now. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Using current settings causes panel flickering on APQ8074 dragonboard. Adjust panel settings to follow the vendor-provided mode. This also enables MIPI_DSI_MODE_VIDEO_SYNC_PULSE, which is also specified by the vendor dtsi for the mentioned dragonboard. Fixes: ee017238 ("drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel") Signed-off-by:
-
XuDong Liu authored
Smatch reports: drivers/gpu/drm/sun4i/sun4i_tcon.c:805 sun4i_tcon_init_clocks() warn: 'tcon->clk' from clk_prepare_enable() not released on lines: 792,801. In the function sun4i_tcon_init_clocks(), tcon->clk and tcon->sclk0 are not disabled in the error handling, which affects the release of these variable. Although sun4i_tcon_bind(), which calls sun4i_tcon_init_clocks(), use sun4i_tcon_free_clocks to disable the variables mentioned, but the error handling branch of sun4i_tcon_init_clocks() ignores the required disable process. To fix this issue, use the devm_clk_get_enabled to automatically balance enable and disabled calls. As original implementation use sun4i_tcon_free_clocks() to disable clk explicitly, we delete the related calls and error handling that are no longer needed. Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support") Fixes: b14e945b ("drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init") Fixes: 8e924047 ("drm/sun4i: support TCONs without channel 1") Fixes: 34d698f6 ("drm/sun4i: Add has_channel_0 TCON quirk") Signed-off-by:
XuDong Liu <m202071377@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230430112347.4689-1-m202071377@hust.edu.cn
-
- 10 May, 2023 2 commits
-
-
Roman Beranek authored
In DSI mode, TCON0's data clock is required to run at 1/4 the per-lane bit rate. Signed-off-by:
Roman Beranek <me@crly.cz> Signed-off-by:
-
Roman Beranek authored
While the rate of TCON0's DCLK matches dotclock for parallel and LVDS outputs, this doesn't hold for DSI. The 'D' in DCLK actually stands for 'Data' according to Allwinner's manuals. The clock is mostly referred to as dclk throughout this driver already anyway, so stick with that. Signed-off-by:
-
- 09 May, 2023 3 commits
-
-
Maxime Ripard authored
Start the 6.5 release cycle. Signed-off-by: -
Maíra Canal authored
I've been contributing to VKMS with improvements, reviews, testing and debugging. Therefore, add myself as a co-maintainer of the VKMS driver. Acked-by:
Melissa Wen <mwen@igalia.com> Reviewed-by:
-
Jani Nikula authored
Add documentation for the DRM_MODE_TV_MODE_MAX enumerator to fix the kernel-doc warning: include/drm/drm_connector.h:204: warning: Enum value 'DRM_MODE_TV_MODE_MAX' not described in enum 'drm_connector_tv_mode' Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20230504123444.1843795-1-jani.nikula@intel.com
-
- 08 May, 2023 24 commits
-
-
Brandon Pollack authored
added documentation to drm_dev_unregister clarifying that devres managed devices allocated with devm_drm_dev_alloc do not require calls to drm_dev_put. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Brandon Pollack <brpol@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230425080240.3582324-1-brpol@chromium.org
-
Thomas Zimmermann authored
Implement DRM fbdev helpers for reading and writing framebuffer memory with the respective fbdev functions. Removes duplicate code. v2: * rename fb_cfb_() to fb_io_() (Geert) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Tested-by:
Helge Deller <deller@gmx.de> Reviewed-by:
-
Thomas Zimmermann authored
Move the existing I/O read and write code for I/O memory into the new helpers fb_cfb_read() and fb_cfb_write(). Make them the default fp_ops. No functional changes. In the near term, the new functions will be useful to the DRM subsystem, which currently provides it's own implementation. It can then use the shared code. In the longer term, it might make sense to revise the I/O helper's default status and make them opt-in by the driver. Systems that don't use them would not contain the code any longer. v2: * add detailed commit message (Javier) * rename fb_cfb_() to fb_io_() (Geert) * add fixes that got lost while moving the code (Geert) Signed-off-by:
-
Thomas Zimmermann authored
Push the test for info->screen_base from fb_read() and fb_write() into the implementations of struct fb_ops.{fb_read,fb_write}. In cases where the driver operates on info->screen_buffer, test this field instead. While bothi fields, screen_base and screen_buffer, are stored in the same location, they refer to different address spaces. For correctness, we want to test each field in exactly the code that uses it. v2: * also test screen_base in pvr2fb (Geert) * also test screen_buffer in ivtvfb, arcfb, broadsheetfb, hecubafb, metronomefb and ssd1307fb (Geert) * give a rational for the change (Geert) Signed-off-by: -
Thomas Zimmermann authored
The file-op entry points fb_read() and fb_write() verify that info->state has been set to FBINFO_STATE_RUNNING. Remove the same test from the implementations of struct fb_ops.{fb_read,fb_write}. v2: * also remove test from ivtvfb, braodsheetfb, hecubafb and metronomefb (Geert) Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. Since the fb_sys_{read,write}() functions operate on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of all the casting needed due to not using the correct data type. v2: * add detailed commit message (Javier) Signed-off-by: -
Thomas Zimmermann authored
Always return the number of bytes read or written within the framebuffer. Only return an errno code if framebuffer memory was not touched. This is the semantics required by POSIX and makes fb_read() and fb_write() compatible with IGT tests. [1] This bug has been fixed for fb_write() long ago by commit 6a2a8866 ("[PATCH] fbdev: Fix return error of fb_write"). The code in fb_read() and the corresponding fb_sys_() helpers was forgotten. It can happen that copy_{from, to}_user() only partially copies the given buffer. Take this into account when calculating the number of bytes. v2: * consider return value from copy_{from,to}_user() (Geert) Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Thomas Zimmermann authored
Use info->screen_buffer when reading and writing framebuffers in system memory. It's the correct pointer for this address space. The struct fb_info has a union to store the framebuffer memory. This can either be info->screen_base if the framebuffer is stored in I/O memory, or info->screen_buffer if the framebuffer is stored in system memory. As the driver operates on the latter address space, it is wrong to use .screen_base and .screen_buffer must be used instead. This also gets rid of casting needed due to not using the correct data type. Signed-off-by:
-
Maíra Canal authored
Now that VKMS supports all values of rotation and reflection, drop the "Rotation" task from the TODO list. Signed-off-by:
-
Maíra Canal authored
Currently, vkms supports the rotate-90, rotate-180, reflect-x and reflect-y properties. Therefore, improve the vkms IGT test coverage by adding the rotate-270 property to vkms. The rotation was implement by software: rotate the way the blending occurs by making the source x axis be the destination y axis and the source y axis be the destination x axis and reverse-read the axis. Now, vkms supports all possible rotation values. Tested with igt@kms_rotation_crc@primary-rotation-270 [1], and igt@kms_rotation_crc@sprite-rotation-270 [1]. [1] https://patchwork.freedesktop.org/series/116025/Signed-off-by:
-
Maíra Canal authored
Currently, vkms only supports the rotate-180, reflect-x and reflect-y properties. Therefore, improve the vkms IGT test coverage by adding the rotate-90 property to vkms. The rotation was implement by software: rotate the way the blending occurs by making the source x axis be the destination y axis and the source y axis be the destination x axis. Tested with igt@kms_rotation_crc@primary-rotation-90 [1], igt@kms_rotation_crc@sprite-rotation-90 [1], and igt@kms_rotation_crc@sprite-rotation-90-pos-100-0 [1]. [1] https://patchwork.freedesktop.org/series/116025/Signed-off-by:
-
Maíra Canal authored
Currently, vkms only supports the reflect-x property. Therefore, add the reflect-y property to vkms through a software implementation of the operation. This is possible by reverse reading the y axis during the blending. Note that, by implementing the reflect-x and reflect-y properties, it is also possible to add the rotate-180 property, as it is a combination of those two properties. Tested with igt@kms_rotation_crc@primary-reflect-y [1], igt@kms_rotation_crc@sprite-reflect-y [1], igt@kms_rotation_crc@primary-rotation-180, igt@kms_rotation_crc@sprite-rotation-180, and igt@kms_rotation_crc@cursor-rotation-180. [1] https://patchwork.freedesktop.org/series/116025/Signed-off-by:
-
