- 11 Jun, 2019 40 commits
-
-
Jiri Slaby authored
commit 4cdd17ba upstream. We need to compute the uart state only on the first open. This is usually what is done in the ->install hook. serial_core used to do this in ->open on every open. So move it to ->install. As a side effect, it ensures the state is set properly in the window after tty_init_dev is called, but before uart_open. This fixes a bunch of races between tty_open and flush_to_ldisc we were dealing with recently. One of such bugs was attempted to fix in commit fedb5760 (serial: fix race between flush_to_ldisc and tty_open), but it only took care of a couple of functions (uart_start and uart_unthrottle). I was able to reproduce the crash on a SLE system, but in uart_write_room which is also called from flush_to_ldisc via process_echoes. I was *unable* to reproduce the bug locally. It is due to having this patch in my queue since 2012! general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5 Comm: kworker/u4:0 Tainted: G L 4.12.14-396-default #1 SLE15-SP1 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc task: ffff8800427d8040 task.stack: ffff8800427f0000 RIP: 0010:uart_write_room+0xc4/0x590 RSP: 0018:ffff8800427f7088 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000002f RSI: 00000000000000ee RDI: ffff88003888bd90 RBP: ffffffffb9545850 R08: 0000000000000001 R09: 0000000000000400 R10: ffff8800427d825c R11: 000000000000006e R12: 1ffff100084fee12 R13: ffffc900004c5000 R14: ffff88003888bb28 R15: 0000000000000178 FS: 0000000000000000(0000) GS:ffff880043300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561da0794148 CR3: 000000000ebf4000 CR4: 00000000000006e0 Call Trace: tty_write_room+0x6d/0xc0 __process_echoes+0x55/0x870 n_tty_receive_buf_common+0x105e/0x26d0 tty_ldisc_receive_buf+0xb7/0x1c0 tty_port_default_receive_buf+0x107/0x180 flush_to_ldisc+0x35d/0x5c0 ... 0 in rbx means tty->driver_data is NULL in uart_write_room. 0x178 is tried to be dereferenced (0x178 >> 3 is 0x2f in rdx) at uart_write_room+0xc4. 0x178 is exactly (struct uart_state *)NULL->refcount used in uart_port_lock from uart_write_room. So revert the upstream commit here as my local patch should fix the whole family. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Li RongQing <lirongqing@baidu.com> Cc: Wang Li <wangli39@baidu.com> Cc: Zhang Yu <zhangyu31@baidu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit d90c06d5 upstream. This was supposed to be a mask of all known rings, but it is being used by execbuffer to filter out invalid rings, and so is instead mapping high unused values onto valid rings. Instead of a mask of all known rings, we need it to be the mask of all possible rings. Fixes: 549f7365 ("drm/i915: Enable SandyBridge blitter ring") Fixes: de1add36 ("drm/i915: Decouple execbuf uAPI from internal implementation") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-21-chris@chris-wilson.co.ukSigned-off-by:
-
Christian König authored
commit 2e26ccb1 upstream. Instead of the closest reference divider prefer the lowest, this fixes flickering issues on HP Compaq nx9420. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=108514Suggested-by:
Paul Dufresne <dufresnep@gmail.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Patrik Jakobsson authored
commit 7c420636 upstream. Some machines have an lvds child device in vbt even though a panel is not attached. To make detection more reliable we now also check the lvds config bits available in the vbt. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1665766 Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416114607.1072-1-patrik.r.jakobsson@gmail.comSigned-off-by:
-
Dan Carpenter authored
commit 110080ce upstream. There are a couple potential integer overflows here. round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE); The first thing is that the "m->size + (...)" addition could overflow, and the second is that round_up() overflows to zero if the result is within PAGE_SIZE of the type max. In this code, the "m->size" variable is an u64 but we're saving the result in "map_size" which is an unsigned long and genwqe_user_vmap() takes an unsigned long as well. So I have used ULONG_MAX as the upper bound. From a practical perspective unsigned long is fine/better than trying to change all the types to u64. Fixes: eaf4722d ("GenWQE Character device and DDCB queue") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit f9b1baac which is commit a1e8783d upstream. Petr writes: Karl has reported to me today, that he's experiencing weird reboot hang on his devices with 4.9.180 kernel and that he has bisected it down to my backported patch. I would like to kindly ask you for removal of this patch. This patch should be reverted from all stable kernels up to 5.1, because perf counters were not broken on those kernels, and this patch won't work on the ath79 legacy IRQ code anyway, it needs new irqchip driver which was enabled on ath79 with commit 51fa4f89 ("MIPS: ath79: drop legacy IRQ code"). Reported-by:
Petr Štetiar <ynezz@true.cz> Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: John Crispin <john@phrozen.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Paul Burton authored
commit e4f2d1af upstream. The pistachio platform uses the U-Boot bootloader & generally boots a kernel in the uImage format. As such it's useful to build one when building the kernel, but to do so currently requires the user to manually specify a uImage target on the make command line. Make uImage.gz the pistachio platform's default build target, so that the default is to build a kernel image that we can actually boot on a board such as the MIPS Creator Ci40. Marked for stable backport as far as v4.1 where pistachio support was introduced. This is primarily useful for CI systems such as kernelci.org which will benefit from us building a suitable image which can then be booted as part of automated testing, extending our test coverage to the affected stable branches. Signed-off-by:
Paul Burton <paul.burton@mips.com> Reviewed-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
-
Jiri Kosina authored
commit ec527c31 upstream. As explained in 0cc3cd21 ("cpu/hotplug: Boot HT siblings at least once") we always, no matter what, have to bring up x86 HT siblings during boot at least once in order to avoid first MCE bringing the system to its knees. That means that whenever 'nosmt' is supplied on the kernel command-line, all the HT siblings are as a result sitting in mwait or cpudile after going through the online-offline cycle at least once. This causes a serious issue though when a kernel, which saw 'nosmt' on its commandline, is going to perform resume from hibernation: if the resume from the hibernated image is successful, cr3 is flipped in order to point to the address space of the kernel that is being resumed, which in turn means that all the HT siblings are all of a sudden mwaiting on address which is no longer valid. That results in triple fault shortly after cr3 is switched, and machine reboots. Fix this by always waking up all the SMT siblings before initiating the 'restore from hibernation' process; this guarantees that all the HT siblings will be properly carried over to the resumed kernel waiting in resume_play_dead(), and acted upon accordingly afterwards, based on the target kernel configuration. Symmetricaly, the resumed kernel has to push the SMT siblings to mwait again in case it has SMT disabled; this means it has to online all the siblings when resuming (so that they come out of hlt) and offline them again to let them reach mwait. Cc: 4.19+ <stable@vger.kernel.org> # v4.19+ Debugged-by:
Thomas Gleixner <tglx@linutronix.de> Fixes: 0cc3cd21 ("cpu/hotplug: Boot HT siblings at least once") Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Miklos Szeredi authored
commit 35d6fcbb upstream. Do the proper cleanup in case the size check fails. Tested with xfstests:generic/228 Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
John David Anglin authored
commit 63923d2c upstream. We only support I/O to kernel space. Using %sr1 to load the coherence index may be racy unless interrupts are disabled. This patch changes the code used to load the coherence index to use implicit space register selection. This saves one instruction and eliminates the race. Tested on rp3440, c8000 and c3750. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Linus Torvalds authored
commit 66be4e66 upstream. Herbert Xu pointed out that commit bb73c52b ("rcu: Don't disable preemption for Tiny and Tree RCU readers") was incorrect in making the preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT. If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is a no-op, but still is a compiler barrier. And RCU locking still _needs_ that compiler barrier. It is simply fundamentally not true that RCU locking would be a complete no-op: we still need to guarantee (for example) that things that can trap and cause preemption cannot migrate into the RCU locked region. The way we do that is by making it a barrier. See for example commit 386afc91 ("spinlocks and preemption points need to be at least compiler barriers") from back in 2013 that had similar issues with spinlocks that become no-ops on UP: they must still constrain the compiler from moving other operations into the critical region. Now, it is true that a lot of RCU operations already use READ_ONCE() and WRITE_ONCE() (which in practice likely would never be re-ordered wrt anything remotely interesting), but it is also true that that is not globally the case, and that it's not even necessarily always possible (ie bitfields etc). Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Fixes: bb73c52b ("rcu: Don't disable preemption for Tiny and Tree RCU readers") Cc: stable@kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 4970b42d ] This reverts commit e9919a24. Nathan reported the new behaviour breaks Android, as Android just add new rules and delete old ones. If we return 0 without adding dup rules, Android will remove the new added rules and causing system to soft-reboot. Fixes: e9919a24 ("fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied") Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Reported-by:
Yaro Slav <yaro330@gmail.com> Reported-by:
Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit d5c71a7c as the patch that this "fixes" is about to be reverted... Signed-off-by:
-
Olivier Matz authored
[ Upstream commit 59e3e4b5 ] As it was done in commit 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") and commit 20b50d79 ("net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the value of inet->hdrincl in a local variable, to avoid introducing a race condition in the next commit. Signed-off-by:
Olivier Matz <olivier.matz@6wind.com> Signed-off-by:
-
Olivier Matz authored
[ Upstream commit b9aa52c4 ] The following code returns EFAULT (Bad address): s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6); setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1); sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */ The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW instead of IPPROTO_ICMPV6. The failure happens because 2 bytes are eaten from the msghdr by rawv6_probe_proto_opt() starting from commit 19e3c66b ("ipv6 equivalent of "ipv4: Avoid reading user iov twice after raw_probe_proto_opt""), but at that time it was not a problem because IPV6_HDRINCL was not yet introduced. Only eat these 2 bytes if hdrincl == 0. Fixes: 715f504b ("ipv6: add IPV6_HDRINCL option for raw sockets") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 720f1de4 ] Currently, the process issuing a "start" command on the pktgen procfs interface, acquires the pktgen thread lock and never release it, until all pktgen threads are completed. The above can blocks indefinitely any other pktgen command and any (even unrelated) netdevice removal - as the pktgen netdev notifier acquires the same lock. The issue is demonstrated by the following script, reported by Matteo: ip -b - <<'EOF' link add type dummy link add type veth link set dummy0 up EOF modprobe pktgen echo reset >/proc/net/pktgen/pgctrl { echo rem_device_all echo add_device dummy0 } >/proc/net/pktgen/kpktgend_0 echo count 0 >/proc/net/pktgen/dummy0 echo start >/proc/net/pktgen/pgctrl & sleep 1 rmmod veth Fix the above releasing the thread lock around the sleep call. Additionally we must prevent racing with forcefull rmmod - as the thread lock no more protects from them. Instead, acquire a self-reference before waiting for any thread. As a side effect, running rmmod pktgen while some thread is running now fails with "module in use" error, before this patch such command hanged indefinitely. Note: the issue predates the commit reported in the fixes tag, but this fix can't be applied before the mentioned commit. v1 -> v2: - no need to check for thread existence after flipping the lock, pktgen threads are freed only at net exit time - Fixes: 6146e6a4 ("[PKTGEN]: Removes thread_{un,}lock() macros.") Reported-and-tested-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit 85cb9287 ] When the following tests last for several hours, the problem will occur. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30 The following will occur. " Starting up.... tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 " >From vmcore, we can find that clean_list is NULL. >From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker. Then rds_ib_mr_pool_flush_worker calls " rds_ib_flush_mr_pool(pool, 0, NULL); " Then in function " int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool, int free_all, struct rds_ib_mr **ibmr_ret) " ibmr_ret is NULL. In the source code, " ... list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail); if (ibmr_ret) *ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode); /* more than one entry in llist nodes */ if (clean_nodes->next) llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list); ... " When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next instead of clean_nodes is added in clean_list. So clean_nodes is discarded. It can not be used again. The workqueue is executed periodically. So more and more clean_nodes are discarded. Finally the clean_list is NULL. Then this problem will occur. Fixes: 1bc144b6 ("net, rds, Replace xlist in net/rds/xlist.h with llist") Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Erez Alfasi authored
[ Upstream commit 135dd959 ] Querying EEPROM high pages data for SFP module is currently not supported by our driver but is still tried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module to limit the reading for page 0 only and prevent invalid FW queries. Fixes: 7202da8b ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 4b2a2bfe ] Commit cd9ff4de changed the key for IFF_POINTOPOINT devices to INADDR_ANY but neigh_xmit which is used for MPLS encapsulations was not updated to use the altered key. The result is that every packet Tx does a lookup on the gateway address which does not find an entry, a new one is created only to find the existing one in the table right before the insert since arp_constructor was updated to reset the primary key. This is seen in the allocs and destroys counters: ip -s -4 ntable show | head -10 | grep alloc which increase for each packet showing the unnecessary overhread. Fix by having neigh_xmit use __ipv4_neigh_lookup_noref for NEIGH_ARP_TABLE. Fixes: cd9ff4de ("ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY") Reported-by:
Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Tested-by:
-
Vivien Didelot authored
[ Upstream commit 0ee4e769 ] ethtool_get_regs() allocates a buffer of size ops->get_regs_len(), and pass it to the kernel driver via ops->get_regs() for filling. There is no restriction about what the kernel drivers can or cannot do with the open ethtool_regs structure. They usually set regs->version and ignore regs->len or set it to the same size as ops->get_regs_len(). But if userspace allocates a smaller buffer for the registers dump, we would cause a userspace buffer overflow in the final copy_to_user() call, which uses the regs.len value potentially reset by the driver. To fix this, make this case obvious and store regs.len before calling ops->get_regs(), to only copy as much data as requested by userspace, up to the value returned by ops->get_regs_len(). While at it, remove the redundant check for non-null regbuf. Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Nadav Amit authored
commit 89dd34ca upstream. The use of ALIGN() in uvc_alloc_entity() is incorrect, since the size of (entity->pads) is not a power of two. As a stop-gap, until a better solution is adapted, use roundup() instead. Found by a static assertion. Compile-tested only. Fixes: 4ffc2d89 ("uvcvideo: Register subdevices for each entity") Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ard Biesheuvel authored
commit 60f38de7 upstream. Merge the parsing of the command line carried out in arm-stub.c with the handling in efi_parse_options(). Note that this also fixes the missing handling of CONFIG_CMDLINE_FORCE=y, in which case the builtin command line should supersede the one passed by the firmware. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: bhsharma@redhat.com Cc: bp@alien8.de Cc: eugene@hp.com Cc: evgeny.kalugin@intel.com Cc: jhugo@codeaurora.org Cc: leif.lindholm@linaro.org Cc: linux-efi@vger.kernel.org Cc: mark.rutland@arm.com Cc: roy.franz@cavium.com Cc: rruigrok@codeaurora.org Link: http://lkml.kernel.org/r/20170404160910.28115-1-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> [ardb: fix up merge conflicts with 4.9.180] Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 392bef70. It seems to cause lots of problems when using the gold linker, and no one really needs this at the moment, so just revert it from the stable trees. Cc: Sami Tolvanen <samitolvanen@google.com> Reported-by:
Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by:
Alec Ari <neotheuser@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit f958d7b5 upstream. We have a VM_BUG_ON() to check that the page reference count doesn't underflow (or get close to overflow) by checking the sign of the count. That's all fine, but we actually want to allow people to use a "get page ref unless it's already very high" helper function, and we want that one to use the sign of the page ref (without triggering this VM_BUG_ON). Change the VM_BUG_ON to only check for small underflows (or _very_ close to overflowing), and ignore overflows which have strayed into negative territory. Acked-by:
Matthew Wilcox <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Linus Torvalds authored
commit 8fde12ca upstream. If the page refcount wraps around past zero, it will be freed while there are still four billion references to it. One of the possible avenues for an attacker to try to make this happen is by doing direct IO on a page multiple times. This patch makes get_user_pages() refuse to take a new page reference if there are already more than two billion references to the page. Reported-by:
Jann Horn <jannh@google.com> Acked-by:
-
Punit Agrawal authored
commit d63206ee upstream. When speculatively taking references to a hugepage using page_cache_add_speculative() in gup_huge_pmd(), it is assumed that the page returned by pmd_page() is the head page. Although normally true, this assumption doesn't hold when the hugepage comprises of successive page table entries such as when using contiguous bit on arm64 at PTE or PMD levels. This can be addressed by ensuring that the page passed to page_cache_add_speculative() is the real head or by de-referencing the head page within the function. We take the first approach to keep the usage pattern aligned with page_cache_get_speculative() where users already pass the appropriate page, i.e., the de-referenced head. Apply the same logic to fix gup_huge_[pud|pgd]() as well. [punit.agrawal@arm.com: fix arm64 ltp failure] Link: http://lkml.kernel.org/r/20170619170145.25577-5-punit.agrawal@arm.com Link: http://lkml.kernel.org/r/20170522133604.11392-3-punit.agrawal@arm.comSigned-off-by:
Punit Agrawal <punit.agrawal@arm.com> Acked-by:
Steve Capper <steve.capper@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Will Deacon authored
commit a3e32855 upstream. When operating on hugepages with DEBUG_VM enabled, the GUP code checks the compound head for each tail page prior to calling page_cache_add_speculative. This is broken, because on the fast-GUP path (where we don't hold any page table locks) we can be racing with a concurrent invocation of split_huge_page_to_list. split_huge_page_to_list deals with this race by using page_ref_freeze to freeze the page and force concurrent GUPs to fail whilst the component pages are modified. This modification includes clearing the compound_head field for the tail pages, so checking this prior to a successful call to page_cache_add_speculative can lead to false positives: In fact, page_cache_add_speculative *already* has this check once the page refcount has been successfully updated, so we can simply remove the broken calls to VM_BUG_ON_PAGE. Link: http://lkml.kernel.org/r/20170522133604.11392-2-punit.agrawal@arm.comSigned-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Matthew Wilcox authored
commit 15fab63e upstream. Change pipe_buf_get() to return a bool indicating whether it succeeded in raising the refcount of the page (if the thing in the pipe is a page). This removes another mechanism for overflowing the page refcount. All callers converted to handle a failure. Reported-by:
-
Todd Kjos authored
commit 8ca86f16 upstream. The format specifier "%p" can leak kernel addresses. Use "%pK" instead. There were 4 remaining cases in binder.c. Signed-off-by:
Todd Kjos <tkjos@google.com> Signed-off-by:
-
Ben Hutchings authored
This was done as part of upstream commits fdfb4a99 "8inder: separate binder allocator structure from binder proc", 19c98724 "binder: separate out binder_alloc functions", and 7a4408c6 "binder: make sure accesses to proc/thread are safe". However, those commits made lots of other changes that are not suitable for stable. Signed-off-by:
-
Arend van Spriel authored
commit a4176ec3 upstream. For USB there is no separate channel being used to pass events from firmware to the host driver and as such are passed over the data path. In order to detect mock event messages an additional check is needed on event subtype. This check is added conditionally using unlikely() keyword. Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arend van Spriel authored
commit 1b5e2423 upstream. The SSID length as received from firmware should not exceed IEEE80211_MAX_SSID_LEN as that would result in heap overflow. Reviewed-by:
-
Arend Van Spriel authored
commit 4835f37e upstream. Assure the event data buffer is long enough to hold the array of netinfo items and that SSID length does not exceed the maximum of 32 characters as per 802.11 spec. Reviewed-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Thomas Hellstrom authored
commit 63cb4444 upstream. This may confuse user-space clients like plymouth that opens a drm file descriptor as a result of a hotplug event and then generates a new event... Cc: <stable@vger.kernel.org> Fixes: 5ea17348 ("drm/vmwgfx: Send a hotplug event at master_set") Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
-
Kees Cook authored
commit 7210e060 upstream. The gcc-common.h file did not take into account certain macros that might have already been defined in the build environment. This updates the header to avoid redefining the macros, as seen on a Darwin host using gcc 4.9.2: HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o - due to: scripts/gcc-plugins/gcc-common.h In file included from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:0: scripts/gcc-plugins/gcc-common.h:153:0: warning: "__unused" redefined ^ In file included from /usr/include/stdio.h:64:0, from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/system.h:40, from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/gcc-plugin.h:28, from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/plugin.h:23, from scripts/gcc-plugins/gcc-common.h:9, from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3: /usr/include/sys/cdefs.h:161:0: note: this is the location of the previous definition ^ Reported-and-tested-by:
"H. Nikolaus Schaller" <hns@goldelico.com> Fixes: 189af465 ("ARM: smp: add support for per-task stack canaries") Cc: stable@vger.kernel.org Signed-off-by:
-
Roberto Bergantinos Corpas authored
commit 31fad7d4 upstream. In cifs_read_allocate_pages, in case of ENOMEM, we go through whole rdata->pages array but we have failed the allocation before nr_pages, therefore we may end up calling put_page with NULL pointer, causing oops Signed-off-by:
Roberto Bergantinos Corpas <rbergant@redhat.com> Acked-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit ca641bae upstream. The create_pagelist() "count" parameter comes from the user in vchiq_ioctl() and it could overflow. If you look at how create_page() is called in vchiq_prepare_bulk_data(), then the "size" variable is an int so it doesn't make sense to allow negatives or larger than INT_MAX. I don't know this code terribly well, but I believe that typical values of "count" are typically quite low and I don't think this check will affect normal valid uses at all. The "pagelist_size" calculation can also overflow on 32 bit systems, but not on 64 bit systems. I have added an integer overflow check for that as well. The Raspberry PI doesn't offer the same level of memory protection that x86 does so these sorts of bugs are probably not super critical to fix. Fixes: 71bad7f0 ("staging: add bcm2708 vchiq driver") Signed-off-by:
-
Jonathan Corbet authored
commit 3bc80884 upstream. Our version check in Documentation/conf.py never envisioned a world where Sphinx moved beyond 1.x. Now that the unthinkable has happened, fix our version check to handle higher version numbers correctly. Cc: stable@vger.kernel.org Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Zhenliang Wei authored
commit 98af37d6 upstream. In the fixes commit, removing SIGKILL from each thread signal mask and executing "goto fatal" directly will skip the call to "trace_signal_deliver". At this point, the delivery tracking of the SIGKILL signal will be inaccurate. Therefore, we need to add trace_signal_deliver before "goto fatal" after executing sigdelset. Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info. Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com Fixes: cf43a757 ("signal: Restore the stop PTRACE_EVENT_EXIT") Signed-off-by:
Zhenliang Wei <weizhenliang@huawei.com> Reviewed-by:
Christian Brauner <christian@brauner.io> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Ivan Delalande <colona@arista.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jiri Slaby authored
commit 3e858996 upstream. We have a single node system with node 0 disabled: Scanning NUMA topology in Northbridge 24 Number of physical nodes 2 Skipping disabled node 0 Node 1 MemBase 0000000000000000 Limit 00000000fbff0000 NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff] This causes crashes in memcg when system boots: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] ... RIP: 0010:list_lru_add+0x94/0x170 ... Call Trace: d_lru_add+0x44/0x50 dput.part.34+0xfc/0x110 __fput+0x108/0x230 task_work_run+0x9f/0xc0 exit_to_usermode_loop+0xf5/0x100 It is reproducible as far as 4.12. I did not try older kernels. You have to have a new enough systemd, e.g. 241 (the reason is unknown -- was not investigated). Cannot be reproduced with systemd 234. The system crashes because the size of lru array is never updated in memcg_update_all_list_lrus and the reads are past the zero-sized array, causing dereferences of random memory. The root cause are list_lru_memcg_aware checks in the list_lru code. The test in list_lru_memcg_aware is broken: it assumes node 0 is always present, but it is not true on some systems as can be seen above. So fix this by avoiding checks on node 0. Remember the memcg-awareness by a bool flag in struct list_lru. Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz Fixes: 60d3fd32 ("list_lru: introduce per-memcg lists") Signed-off-by:
Michal Hocko <mhocko@suse.com> Suggested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
