- 16 Aug, 2017 40 commits
-
-
David Sterba authored
There are two independent parts, one that writes the superblocks and another that waits for completion. No functional changes, but cleanups, reformatting and comment updates. Signed-off-by:David Sterba <dsterba@suse.com>
-
David Sterba authored
Polish the helper: * drop underscores, no special meaning here * pass fs_devices, as this is what the API implements * drop noinline, no apparent reason for such simple helper * constify uuid * add comment Signed-off-by: -
David Sterba authored
There are two helpers called in chain from one location, we can merge the functionaliy. Originally, alloc_fs_devices could fill the device uuid randomly if we we didn't give the uuid buffer. This happens for seed devices but the fsid is generated in btrfs_prepare_sprout, so we can remove it. Signed-off-by: -
David Sterba authored
The function submit_extent_page has 15(!) parameters right now, op and op_flags are effectively one value stored to bio::bi_opf, no need to pass them separately. So it's 14 parameters now. Signed-off-by: -
David Sterba authored
Unify types of local variables and parameters that store various REQ_* values to unsigned int. Signed-off-by: -
David Sterba authored
Signed-off-by: -
David Sterba authored
Signed-off-by: -
David Sterba authored
This function prints an informative message and then continues dev-replace. The message contains a progress percentage which is read from the status. The status is allocated dynamically, about 2600 bytes, just to read the single value. That's an overkill. We'll use the new helper and drop the allocation. Signed-off-by: -
David Sterba authored
We'll want to read the percentage value from dev_replace elsewhere, move the logic to a separate helper. Signed-off-by: -
David Sterba authored
All sorts of readahead errors are not considered fatal. We can continue defragmentation without it, with some potential slow down, which will last only for the current inode. Signed-off-by: -
David Sterba authored
We can safely use GFP_KERNEL, the function is called from two contexts: - ioctl handler, called directly, no locks taken - cleaner thread, running all queued defrag work, outside of any locks Signed-off-by: -
David Sterba authored
We don't need to restrict the allocation flags in btrfs_mount or _remount. No big filesystem locks are held (possibly s_umount but that does no count here). Signed-off-by: -
Nikolay Borisov authored
One of the error handling paths in __add_reloc_root contains btrfs_panic() followed by some other code. As the name implies what it does is print some error message and call BUG, naturally what follow afterwards is not invoked. So remove this extra code. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Nikolay Borisov authored
This also adjusts the respective callers in other files. Those were found with -Wunused-parameter. btrfs_full_stripe_len's mapping_tree - introduced by 53b381b3 ("Btrfs: RAID5 and RAID6") but it was never really used even in that commit btrfs_is_parity_mirror's mirror_num - same as above chunk_drange_filter's chunk_offset - introduced by 94e60d5a ("Btrfs: devid subset filter") and never used. Signed-off-by:
-
Nikolay Borisov authored
clear_super - usage was removed in commit cea67ab9 ("btrfs: clean the old superblocks before freeing the device") but that change forgot to remove the actual variable. max_key - commit 6174d3cb ("Btrfs: remove unused max_key arg from btrfs_search_forward") removed the max_key parameter but it forgot to remove references from callers. stripe_len - this one was added by e06cd3dd ("Btrfs: add validadtion checks for chunk loading") but even then it wasn't used. Signed-off-by:
-
Nikolay Borisov authored
find_raid56_stripe_len statically returns SZ_64K which equals BTRFS_STRIPE_LEN. It's sole caller is __btrfs_alloc_chunk and it assigns the return value to ai variable which is already set to BTRFS_STRIPE_LEN. So remove the function invocation altogether and remove the function itself. Also remove the variable since it's only aliasing BTRFS_STRIPE_LEN and use the define directly. Use the occassion to simplify the rounding down of stripe_size now that the value we want it to align is a power of 2. Signed-off-by:
Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by:
-
Nikolay Borisov authored
No functional changes, just make the code more self-explanatory. Signed-off-by:
-
Anand Jain authored
btrfs_new_inode() is the only consumer move it to inode.c, from ioctl.c. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Nick Terrell authored
find_workspace() allocates up to num_online_cpus() + 1 workspaces. free_workspace() will only keep num_online_cpus() workspaces. When (de)compressing we will allocate num_online_cpus() + 1 workspaces, then free one, and repeat. Instead, we can just keep num_online_cpus() + 1 workspaces around, and never have to allocate/free another workspace in the common case. I tested on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. I mounted a BtrFS partition with -o compress-force={lzo,zlib,zstd} and logged whenever a workspace was allocated of freed. Then I copied vmlinux (527 MB) to the partition. Before the patch, during the copy it would allocate and free 5-6 workspaces. After, it only allocated the initial 3. This held true for lzo, zlib, and zstd. The time it took to execute cp vmlinux /mnt/btrfs && sync dropped from 1.70s to 1.44s with lzo compression, and from 2.04s to 1.80s for zstd compression. Signed-off-by:Nick Terrell <terrelln@fb.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
David Sterba authored
The helpers append "\n" so we can keep the actual strings shorter. The extra newline will print an empty line. Some messages have been slightly modified to be more consistent with the rest (lowercase first letter). Reviewed-by:
-
Nikolay Borisov authored
The current code was erroneously checking for root_level > BTRFS_MAX_LEVEL. If we had a root_level of 8 then the check won't trigger and we could potentially hit a buffer overflow. The correct check should be root_level >= BTRFS_MAX_LEVEL . Signed-off-by:
-
Qu Wenruo authored
For a missing device, btrfs will just refuse to mount with almost meaningless kernel message like: BTRFS info (device vdb6): disk space caching is enabled BTRFS info (device vdb6): has skinny extents BTRFS error (device vdb6): failed to read the system array: -5 BTRFS error (device vdb6): open_ctree failed This patch will print a new message about the missing device: BTRFS info (device vdb6): disk space caching is enabled BTRFS info (device vdb6): has skinny extents BTRFS warning (device vdb6): devid 2 uuid 80470722-cad2-4b90-b7c3-fee294552f1b is missing BTRFS error (device vdb6): failed to read the system array: -5 BTRFS error (device vdb6): open_ctree failed Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by:
-
Qu Wenruo authored
As we use per-chunk degradable check, the global num_tolerated_disk_barrier_failures is of no use. We can now remove it. Signed-off-by:
-
Qu Wenruo authored
The last user of num_tolerated_disk_barrier_failures is barrier_all_devices(). But it can be easily changed to the new per-chunk degradable check framework. Signed-off-by:
-
Qu Wenruo authored
Just the same for mount time check, use btrfs_check_rw_degradable() to check if we are OK to be remounted rw. Signed-off-by:
-
Qu Wenruo authored
Now use the btrfs_check_rw_degradable() to check if we can mount in the degraded mode. With this patch, we can mount in the following case: # mkfs.btrfs -f -m raid1 -d single /dev/sdb /dev/sdc # wipefs -a /dev/sdc # mount /dev/sdb /mnt/btrfs -o degraded As the single data chunk is only on sdb, so it's OK to mount as degraded, as missing one device is OK for RAID1. But still fail in the following case as expected: # mkfs.btrfs -f -m raid1 -d single /dev/sdb /dev/sdc # wipefs -a /dev/sdb # mount /dev/sdc /mnt/btrfs -o degraded As the data chunk is only in sdb, so it's not OK to mount it as degraded. Reported-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Reported-by:
-
Qu Wenruo authored
Introduce a new function, btrfs_check_rw_degradable(), to check if all chunks in btrfs is OK for degraded rw mount. It provides the new basis for accurate btrfs mount/remount and even runtime degraded mount check other than old one-size-fit-all method. Btrfs currently uses num_tolerated_disk_barrier_failures to do global check for tolerated missing device. Although the one-size-fit-all solution is quite safe, it's too strict if data and metadata has different duplication level. For example, if one use Single data and RAID1 metadata for 2 disks, it means any missing device will make the fs unable to be degraded mounted. But in fact, some times all single chunks may be in the existing device and in that case, we should allow it to be rw degraded mounted. Such case can be easily reproduced using the following script: # mkfs.btrfs -f -m raid1 -d sing /dev/sdb /dev/sdc # wipefs -f /dev/sdc # mount /dev/sdb -o degraded,rw If using btrfs-debug-tree to check /dev/sdb, one should find that the data chunk is only in sdb, so in fact it should allow degraded mount. This patchset will introduce a new per-chunk degradable check for btrfs, allow above case to succeed, and it's quite small anyway. Signed-off-by:
-
Liu Bo authored
When btrfs fails the checksum check, it'll fill the whole page with "1". However, if %csum_expected is 0 (which means there is no checksum), then for some unknown reason, we just pretend that the read is correct, so userspace would be confused about the dilemma that read is successful but getting a page with all content being "1". This can happen due to a bug in btrfs-convert. This fixes it by always returning errors if checksum doesn't match. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Nikolay Borisov authored
In btrfs_full_stripe_len/btrfs_is_parity_mirror we have similar code which gets the chunk map for a particular range via get_chunk_map. However, get_chunk_map can return an ERR_PTR value and while the 2 callers do catch this with a WARN_ON they then proceed to indiscriminately dereference the extent map. This of course leads to a crash. Fix the offenders by making the dereference conditional on IS_ERR. Signed-off-by:
-
Nikolay Borisov authored
Many commits ago the data space_info in alloc_data_chunk_ondemand used to be acquired from the inode. At that point commit 33b4d47f ("Btrfs: deal with NULL space info") got introduced to deal with spurios cases where the space info could be null, following a rebalance. Nowadays, however, the space info is referenced directly from the btrfs_fs_info struct which is initialised at filesystem mount time. This makes the null checks redundant, so remove them. Signed-off-by:
-
Nikolay Borisov authored
All callers of flush_space pass the same number for orig/num_bytes arguments. Let's remove one of the numbers and also modify the trace point to show only a single number - bytes requested. Seems that last point where the two parameters were treated differently is before the ticketed enospc rework. Signed-off-by:
-
Aleksa Sarai authored
Several distributions mount the "proper root" as ro during initrd and then remount it as rw before pivot_root(2). Thus, if a rescan had been aborted by a previous shutdown, the rescan would never be resumed. This issue would manifest itself as several btrfs ioctl(2)s causing the entire machine to hang when btrfs_qgroup_wait_for_completion was hit (due to the fs_info->qgroup_rescan_running flag being set but the rescan itself not being resumed). Notably, Docker's btrfs storage driver makes regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT (causing this problem to be manifested on boot for some machines). Cc: <stable@vger.kernel.org> # v3.11+ Cc: Jeff Mahoney <jeffm@suse.com> Fixes: b382a324 ("Btrfs: fix qgroup rescan resume on mount") Signed-off-by:
Aleksa Sarai <asarai@suse.de> Reviewed-by:
-
Edmund Nadolski authored
Repeating the same computation in multiple places is not necessary. Signed-off-by:
Edmund Nadolski <enadolski@suse.com> Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Edmund Nadolski authored
When called with a struct share_check, find_parent_nodes() will detect a shared extent and immediately return with BACKREF_SHARED_FOUND. Signed-off-by:
-
Edmund Nadolski authored
Since backref resolution is CPU-intensive, the cond_resched calls should help alleviate soft lockup occurences. Signed-off-by:
-
Jeff Mahoney authored
This patch adds a tracepoint event for prelim_ref insertion and merging. For each, the ref being inserted or merged and the count of tree nodes is issued. Signed-off-by:
-
Jeff Mahoney authored
This patch adds counters to each of the rbtrees so that we can tell how large they are growing for a given workload. These counters will be exported by tracepoints in the next patch. Signed-off-by:
-
Edmund Nadolski authored
It's been known for a while that the use of multiple lists that are periodically merged was an algorithmic problem within btrfs. There are several workloads that don't complete in any reasonable amount of time (e.g. btrfs/130) and others that cause soft lockups. The solution is to use a set of rbtrees that do insertion merging for both indirect and direct refs, with the former converting refs into the latter. The result is a btrfs/130 workload that used to take several hours now takes about half of that. This runtime still isn't acceptable and a future patch will address that by moving the rbtrees higher in the stack so the lookups can be shared across multiple calls to find_parent_nodes. Signed-off-by:
-
Edmund Nadolski authored
Commit afce772e ("btrfs: fix check_shared for fiemap ioctl") added the ref_tree code in backref.c to reduce backref searching for shared extents under the FIEMAP ioctl. This code will not be compatible with the upcoming rbtree changes for improved backref searching, so this patch removes the ref_tree code. The rbtree changes will provide the equivalent functionality for FIEMAP. The above commit also introduced transaction semantics around calls to btrfs_check_shared() in order to accurately account for delayed refs. This functionality needs to be retained, so a complete revert of the above commit is not desirable. This patch therefore removes the ref_tree portion of the commit as above, however it does not remove the transaction portion. Signed-off-by:
-
Edmund Nadolski authored
Commit afce772e ("btrfs: fix check_shared for fiemap ioctl") added transaction semantics around calls to btrfs_check_shared() in order to provide accurate accounting of delayed refs. The transaction management should be done inside btrfs_check_shared(), so that callers do not need to manage transactions individually. Signed-off-by:
-
