- 01 Mar, 2016 6 commits
-
-
David Gibson authored
Currently, the only error that htab_remove_mapping() can report is -EINVAL, if removal of bolted HPTEs isn't implemeted for this platform. We make a few clean ups to the handling of this: * EINVAL isn't really the right code - there's nothing wrong with the function's arguments - use ENODEV instead * We were also printing a warning message, but that's a decision better left up to the callers, so remove it * One caller is vmemmap_remove_mapping(), which will just BUG_ON() on error, making the warning message redundant, so no change is needed there. * The other caller is remove_section_mapping(). This is called in the memory hot remove path at a point after vmemmap_remove_mapping() so if hpte_removebolted isn't implemented, we'd expect to have already BUG()ed anyway. Put a WARN_ON() here, in lieu of a printk() since this really shouldn't be happening. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Adam Buchbinder authored
Signed-off-by:
Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by:
-
Luis Henriques authored
Instead of defining a local version of struct udphdr use the standard definition from <linux/udp.h>. The 'src' field is named 'source' in the <linux/udp.h> definition. Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Luis Henriques authored
Instead of defining a local version of struct iphdr use the standard definition from <linux/ip.h>. Several fields in the <linux/ip.h> definition have different names: - proto -> protocol - src -> saddr - dest -> daddr - total_length -> tot_len - checksum -> check Also, 'ver_len' is composed by 'version' and 'ihl' in <linux/ip.h>. Signed-off-by:
-
Luis Henriques authored
Instead of defining the local struct vlantag use the standard definition of vlan_hdr from <linux/if_vlan.h>. The fields in the <linux/if_vlan.h> definition have different names: - vlan -> h_vlan_TCI - subtype -> h_vlan_encapsulated_proto While there, use also the ETH_P_IP macro instead of an hard-coded 0x0800 value. Signed-off-by:
-
Luis Henriques authored
Instead of defining a local version of struct ethhdr use the standard definition from <linux/if_ether.h>. The fields in the <linux/if_ether.h> definition have different names: - dest -> h_dest - src -> h_source - type -> h_proto While there, use a few other standard functions/macros: - eth_broadcast_addr (instead of a memset) - ETH_ALEN - ETH_P_8021Q Signed-off-by:
-
- 29 Feb, 2016 7 commits
-
-
Paul Mackerras authored
Now that other PTE fields have been moved out of the way, we can expand the RPN field of the PTE on 64-bit Book 3S systems and align it with the RPN field in the radix PTE format used by PowerISA v3.0 CPUs in radix mode. For 64k page size, this means we need to move the _PAGE_COMBO and _PAGE_4K_PFN bits. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
This moves the _PAGE_SPECIAL and _PAGE_SOFT_DIRTY bits in the Linux PTE on 64-bit Book 3S systems to bit positions which are designated for software use in the radix PTE format used by PowerISA v3.0 CPUs in radix mode. Signed-off-by:
-
Paul Mackerras authored
This moves the _PAGE_EXEC, _PAGE_RW and _PAGE_USER bits around in the Linux PTE on 64-bit Book 3S systems to correspond with the bit positions used in radix mode by PowerISA v3.0 CPUs. This also adds a _PAGE_READ bit corresponding to the read permission bit in the radix PTE. _PAGE_READ is currently unused but could possibly be used in future to improve pte_protnone(). Signed-off-by:
-
Paul Mackerras authored
This moves the _PAGE_HASHPTE, _PAGE_F_GIX and _PAGE_F_SECOND fields in the Linux PTE on 64-bit Book 3S systems to the most significant byte. Of the 5 bits, one is a software-use bit and the other four are reserved bit positions in the PowerISA v3.0 radix PTE format. Using these bits is OK because these bits are all to do with tracking the HPTE(s) associated with the Linux PTE, and therefore won't be needed in radix mode. This frees up bit positions in the lower two bytes. Signed-off-by:
-
Paul Mackerras authored
This changes _PAGE_PTE for 64-bit Book 3S processors from 0x1 to 0x4000_0000_0000_0000, because that bit is used as the L (leaf) bit by PowerISA v3.0 CPUs in radix mode. The "leaf" bit indicates that the PTE points to a page directly rather than another radix level, which is what the _PAGE_PTE bit means. Signed-off-by:
-
Paul Mackerras authored
This changes _PAGE_PRESENT for 64-bit Book 3S processors from 0x2 to 0x8000_0000_0000_0000, because that is where PowerISA v3.0 CPUs in radix mode will expect to find it. Signed-off-by:
-
Paul Mackerras authored
This changes the Linux page tables to store physical addresses rather than kernel virtual addresses in the upper levels of the tree (pgd, pud and pmd) for 64-bit Book 3S machines. This also changes the hugepd pointers used to implement hugepages when the base page size is 4k to store physical addresses rather than virtual addresses (again just for 64-bit Book3S machines). This frees up some high order bits, and will be needed with PowerISA v3.0 machines which read the page table tree in hardware in radix mode. Signed-off-by:
-
- 27 Feb, 2016 2 commits
-
-
Paul Mackerras authored
This frees up bits 57-63 in the Linux PTE on 64-bit Book 3S machines. In the 4k page case, this is done just by reducing the size of the RPN field to 39 bits, giving 51-bit real addresses. In the 64k page case, we had 10 unused bits in the middle of the PTE, so this moves the RPN field down 10 bits to make use of those unused bits. This means the RPN field is now 3 bits larger at 37 bits, giving 53-bit real addresses in the normal case, or 49-bit real addresses for the special 4k PFN case. We are doing this in order to be able to move some other PTE bits into the positions where PowerISA V3.0 processors will expect to find them in radix-tree mode. Ultimately we will be able to move the RPN field to lower bit positions and make it larger. Signed-off-by:
-
Paul Mackerras authored
No code changes. Signed-off-by:
-
- 25 Feb, 2016 1 commit
-
-
Michael Ellerman authored
Pull in our current fixes from 4.5, in particular the "Fix Multi hit ERAT" bug is causing folks some grief when testing next.
-
- 24 Feb, 2016 5 commits
-
-
Balbir Singh authored
I ran into this issue while debugging an early boot problem. The system hit a BUG_ON() but report bug failed to print the line number and file name. The reason being that the system was running in real mode and report_bug() searches for addresses in the PAGE_OFFSET+ region. Suggested-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
pan xinhui authored
__xchg_called_with_bad_pointer() can't tell us which code uses {cmp}xchg with an unsupported size, and no error is reported until the link stage. To make such problems easier to debug, use BUILD_BUG_ON_MSG() instead. Signed-off-by:pan xinhui <xinhui.pan@linux.vnet.ibm.com> [mpe: Tweak change log wording & add relaxed/acquire] Signed-off-by:
-
Jeremy Kerr authored
Most current OpenPOWER platforms have an AST BMC, so add graphics support via the AST DRM driver. Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Jeremy Kerr authored
There are a few firmware-provided interfaces for OpenPOWER platforms: the PRD infrastructure, IPMI support, and MTD access to the PNOR flash. This change adds these to powernv_defconfig Signed-off-by:
-
Jeremy Kerr authored
This change adds a defconfig for the non-virtualised power platforms, based on pseries_defconfig, but without pseries, and little-endian, and no OF trampoline. Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
- 22 Feb, 2016 6 commits
-
-
Michael Neuling authored
Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Michael Neuling authored
Use defines for literals __init_tlb_power[78] rather than hand coding them. Signed-off-by:
-
Michael Neuling authored
Subcores isn't really part of the 2.07 architecture but currently we turn it on using the 2.07 feature bit. Subcores is really a POWER8 specific feature. This adds a new CPU_FTR bit just for subcores and moves the subcore init code over to use this. Reviewed-by:
-
Andrew Donnellan authored
When initialising OPAL interfaces, there is a possibility that opal_msglog_init() may fail to initialise the msglog/memory console. Fix opal_msglog_sysfs_init() so it doesn't try to create sysfs entry for the msglog if this occurs. Suggested-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
We can get a hash pte fault with 4k base page size and find the pte already inserted with 64K base page size. In that case we need to clear the existing slot information from the old pte. Fix this correctly With THP, we also clear the slot information with respect to all the 64K hash pte mapping that 16MB page. They are all invalid now. This make sure we don't find the slot valid when we fault with 4k base page size. Finding the slot valid should not result in any wrong behavior because we do check again in hash page table for the validity. But we can avoid that check completely. Fixes: a43c0eb8 ("powerpc/mm: Convert 4k hash insert to C") Signed-off-by:
-
Gavin Shan authored
During error recovery, the device could be removed as part of the partial hotplug. The criterion used to come with partial hotplug is: if the device driver provides error_detected(), slot_reset() and resume() callbacks, it's immune from hotplug. Otherwise, it's going to experience partial hotplug during EEH recovery. But the criterion isn't correct enough: mlx4_core driver for Mellanox adapters provides error_detected(), slot_reset() callbacks, but resume() isn't there. Those Mellanox adapters won't be to involved in the partial hotplug. This fixes the criterion to a practical one: adpater with driver that provides error_detected(), slot_reset() will be immune from partial hotplug. resume() isn't mandatory. Fixes: f2da4ccf ("powerpc/eeh: More relaxed hotplug criterion") Cc: stable@vger.kernel.org #v4.4+ Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
- 17 Feb, 2016 7 commits
-
-
Boqun Feng authored
Implement cmpxchg{,64}_relaxed and atomic{,64}_cmpxchg_relaxed, based on which _release variants can be built. To avoid superfluous barriers in _acquire variants, we implement these operations with assembly code rather use __atomic_op_acquire() to build them automatically. For the same reason, we keep the assembly implementation of fully ordered cmpxchg operations. However, we don't do the similar for _release, because that will require putting barriers in the middle of ll/sc loops, which is probably a bad idea. Note cmpxchg{,64}_relaxed and atomic{,64}_cmpxchg_relaxed are not compiler barriers. Signed-off-by:Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
-
Boqun Feng authored
Implement xchg{,64}_relaxed and atomic{,64}_xchg_relaxed, based on these _relaxed variants, release/acquire variants and fully ordered versions can be built. Note that xchg{,64}_relaxed and atomic_{,64}_xchg_relaxed are not compiler barriers. Signed-off-by: -
Boqun Feng authored
On powerpc, acquire and release semantics can be achieved with lightweight barriers("lwsync" and "ctrl+isync"), which can be used to implement __atomic_op_{acquire,release}. For release semantics, since we only need to ensure all memory accesses that issue before must take effects before the -store- part of the atomics, "lwsync" is what we only need. On the platform without "lwsync", "sync" should be used. Therefore in __atomic_op_release() we use PPC_RELEASE_BARRIER. For acquire semantics, "lwsync" is what we only need for the similar reason. However on the platform without "lwsync", we can use "isync" rather than "sync" as an acquire barrier. Therefore in __atomic_op_acquire() we use PPC_ACQUIRE_BARRIER, which is barrier() on UP, "lwsync" if available and "isync" otherwise. Implement atomic{,64}_{add,sub,inc,dec}_return_relaxed, and build other variants with these helpers. Signed-off-by: -
Boqun Feng authored
Some architectures may have their special barriers for acquire, release and fence semantics, so that general memory barriers(smp_mb__*_atomic()) in the default __atomic_op_*() may be too strong, so allow architectures to define their own helpers which can overwrite the default helpers. Signed-off-by:
-
Russell Currey authored
Enhanced Error Handling could mean anything in the context of the entire kernel, so change the name to reference that it is both for PCI and powerpc. EEH covers a bit more than the previously listed files, so add the headers and platform-specific code to the EEH maintained section. In addition, I am taking over the maintainership. Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
-
Balbir Singh authored
I spent some time trying to use kgdb and debugged my inability to resume from kgdb_handle_breakpoint(). NIP is not incremented and that leads to a loop in the debugger. I've tested this lightly on a virtual instance with KDB enabled. After the patch, I am able to get the "go" command to work as expected. Signed-off-by:
-
Alexey Kardashevskiy authored
Quite often drivers set only "write" permission assuming that this includes "read" permission as well and this works on plenty of platforms. However IODA2 is strict about this and produces an EEH when "read" permission is not set and reading happens. This adds a workaround in the IODA code to always add the "read" bit when the "write" bit is set. Fixes: 10b35b2b ("powerpc/powernv: Do not set "read" flag if direction==DMA_NONE") Cc: stable@vger.kernel.org # 4.2+ Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by:
Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by:
-
- 15 Feb, 2016 4 commits
-
-
Aneesh Kumar K.V authored
With ppc64 we use the deposited pgtable_t to store the hash pte slot information. We should not withdraw the deposited pgtable_t without marking the pmd none. This ensure that low level hash fault handling will skip this huge pte and we will handle them at upper levels. Recent change to pmd splitting changed the above in order to handle the race between pmd split and exit_mmap. The race is explained below. Consider following race: CPU0 CPU1 shrink_page_list() add_to_swap() split_huge_page_to_list() __split_huge_pmd_locked() pmdp_huge_clear_flush_notify() // pmd_none() == true exit_mmap() unmap_vmas() zap_pmd_range() // no action on pmd since pmd_none() == true pmd_populate() As result the THP will not be freed. The leak is detected by check_mm(): BUG: Bad rss-counter state mm:ffff880058d2e580 idx:1 val:512 The above required us to not mark pmd none during a pmd split. The fix for ppc is to clear the huge pte of _PAGE_USER, so that low level fault handling code skip this pte. At higher level we do take ptl lock. That should serialze us against the pmd split. Once the lock is acquired we do check the pmd again using pmd_same. That should always return false for us and hence we should retry the access. We do the pmd_same check in all case after taking plt with THP (do_huge_pmd_wp_page, do_huge_pmd_numa_page and huge_pmd_set_accessed) Also make sure we wait for irq disable section in other cpus to finish before flipping a huge pte entry with a regular pmd entry. Code paths like find_linux_pte_or_hugepte depend on irq disable to get a stable pte_t pointer. A parallel thp split need to make sure we don't convert a pmd pte to a regular pmd entry without waiting for the irq disable section to finish. Fixes: eef1b3ba ("thp: implement split_huge_pmd()") Acked-by:Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Gavin Shan authored
When PCI bus is unplugged during full hotplug for EEH recovery, the platform PE instance (struct pnv_ioda_pe) isn't released and it dereferences the stale PCI bus that has been released. It leads to kernel crash when referring to the stale PCI bus. This fixes the issue by correcting the PE's primary bus when it's oneline at plugging time, in pnv_pci_dma_bus_setup() which is to be called by pcibios_fixup_bus(). Cc: stable@vger.kernel.org # v4.1+ Reported-by:
Pradipta Ghosh <pradghos@in.ibm.com> Signed-off-by:
-
Gavin Shan authored
When PE is created, its primary bus is cached to pe->bus. At later point, the cached primary bus is returned from eeh_pe_bus_get(). However, we could get stale cached primary bus and run into kernel crash in one case: full hotplug as part of fenced PHB error recovery releases all PCI busses under the PHB at unplugging time and recreate them at plugging time. pe->bus is still dereferencing the PCI bus that was released. This adds another PE flag (EEH_PE_PRI_BUS) to represent the validity of pe->bus. pe->bus is updated when its first child EEH device is online and the flag is set. Before unplugging in full hotplug for error recovery, the flag is cleared. Fixes: 8cdb2833 ("powerpc/eeh: Trace PCI bus from PE") Cc: stable@vger.kernel.org #v3.11+ Reported-by:
-
Denis Kirjanov authored
If a cpu is hotplugged while the hcall trace points are active, it's possible to hit a warning from RCU due to the trace points calling into RCU from an offline cpu, eg: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 Make the hypervisor tracepoints conditional by using TRACE_EVENT_FN_COND. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
- 10 Feb, 2016 2 commits
-
-
Sukadev Bhattiprolu authored
The GPCI hcall allows for a 4K buffer but we limit the buffer to 1K. The problem with a 1K buffer is if a request results in returning more values than can be accomodated in the 1K buffer the request will fail. The buffer we are using is currently allocated on the stack and hence limited in size. Instead use a per-CPU 4K buffer like we do with 24x7 counters (hv-24x7.c). While here, rename the macro GPCI_MAX_DATA_BYTES to HGPCI_MAX_DATA_BYTES for consistency with 24x7 counters. Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Wei Yang authored
When M64 BAR is set to Single PE mode, the PE# assigned to VF could be sparse. This patch restructures the code to allocate sparse PE# for VFs when M64 BAR is set to Single PE mode. Also it rename the offset to pe_num_map to reflect the content is the PE number. Signed-off-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by:
-
