- 28 Feb, 2016 2 commits
-
-
Dan Carpenter authored
[ Upstream commit b1d353ad ] "count" is controlled by the user and it can be negative. Let's prevent that by making it unsigned. You have to have CAP_SYS_RAWIO to call this function so the bug is not as serious as it could be. Fixes: 5369c02d ('intel_scu_ipc: Utility driver for intel scu ipc') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Alexei Potashnik authored
[ Upstream commit 7359df25 ] The newly introduced aborted_task TFO callback has to terminate exchange with QLogic driver, since command is being deleted and no status will be queued to the driver at a later point. This patch also moves the burden of releasing one cmd refcount to the aborted_task handler. Changed iSCSI aborted_task logic to satisfy the above requirement. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
Alexei Potashnik <alexei@purestorage.com> Acked-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
- 23 Feb, 2016 12 commits
-
-
Alexei Potashnik authored
[ Upstream commit df673274 ] RSCN processing in qla2xxx driver can run in parallel with ELS/IO processing. As such the decision to remove disappeared fc port's session could be stale, because a new login sequence has occurred since and created a brand new session. Previous mechanism of dealing with this by delaying deletion request was prone to erroneous deletions if the event that was supposed to cancel the deletion never arrived or has been delayed in processing. New mechanism relies on a time-like generation counter to serialize RSCN updates relative to ELS/IO updates. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
Alexei Potashnik authored
[ Upstream commit daddf5cf ] cancel any commands from initiator's s_id that are still waiting on qla_tgt_wq when PLOGI arrives. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
Alexei Potashnik authored
[ Upstream commit e52a8b45 ] If a new initiator (different WWN) shows up on the same fcport, old initiator's session is scheduled for deletion. But there is a small window between it being marked with QLA_SESS_DELETION_IN_PROGRESS and qlt_unret_sess getting called when new session's commands will keep finding old session in the fcport map. This patch drops cmds/tmrs if they find session in the progress of being deleted. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
Alexei Potashnik authored
[ Upstream commit a6ca8878 ] - keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
Swapnil Nagle authored
[ Upstream commit 8b2f5ff3 ] Since cmds go into qla_tgt_wq and TMRs don't, it's possible that TMR like TASK_ABORT can be queued over the cmd for which it was meant. To avoid this race, use a per-port list to keep track of cmds that are enqueued to qla_tgt_wq but not yet processed. When a TMR arrives, iterate through this list and remove any cmds that match the TMR. This patch supports TASK_ABORT and LUN_RESET. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
Swapnil Nagle <swapnil.nagle@purestorage.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit d4f1b06d ] We should set device's capabilities first, and then register it, otherwise various handlers already present in the kernel will not be able to connect to the device. Reported-by:
Lauri Kasanen <cand@gmx.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 566d1827 ] Some early controllers incorrectly reported zero ports in PORTS_IMPL register and the ahci driver fabricates PORTS_IMPL from the number of ports in those cases. This hasn't mattered but with the new nvme controllers there are cases where zero PORTS_IMPL is valid and should be honored. Disable the workaround for >= AHCI 1.3. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 4ae2182b ] A Root Port's AER structure (rpc) contains a queue of events. aer_irq() enqueues AER status information and schedules aer_isr() to dequeue and process it. When we remove a device, aer_remove() waits for the queue to be empty, then frees the rpc struct. But aer_isr() references the rpc struct after dequeueing and possibly emptying the queue, which can cause a use-after-free error as in the following scenario with two threads, aer_isr() on the left and a concurrent aer_remove() on the right: Thread A Thread B -------- -------- aer_irq(): rpc->prod_idx++ aer_remove(): wait_event(rpc->prod_idx == rpc->cons_idx) # now blocked until queue becomes empty aer_isr(): # ... rpc->cons_idx++ # unblocked because queue is now empty ... kfree(rpc) mutex_unlock(&rpc->rpc_mutex) To prevent this problem, use flush_work() to wait until the last scheduled instance of aer_isr() has completed before freeing the rpc struct in aer_remove(). I reproduced this use-after-free by flashing a device FPGA and re-enumerating the bus to find the new device. With SLUB debug, this crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in GPR25: pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000 Unable to handle kernel paging request for data at address 0x27ef9e3e Workqueue: events aer_isr GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0 NIP [602f5328] pci_walk_bus+0xd4/0x104 [bhelgaas: changelog, stable tag] Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org Signed-off-by:
-
Tejun Heo authored
[ Upstream commit aa226ff4 ] There are three subsystem callbacks in css shutdown path - css_offline(), css_released() and css_free(). Except for css_released(), cgroup core didn't guarantee the order of invocation. css_offline() or css_free() could be called on a parent css before its children. This behavior is unexpected and led to bugs in cpu and memory controller. This patch updates offline path so that a parent css is never offlined before its children. Each css keeps online_cnt which reaches zero iff itself and all its children are offline and offline_css() is invoked only after online_cnt reaches zero. This fixes the memory controller bug and allows the fix for cpu controller. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reported-by:
Brian Christiansen <brian.o.christiansen@gmail.com> Link: http://lkml.kernel.org/g/5698A023.9070703@de.ibm.com Link: http://lkml.kernel.org/g/CAKB58ikDkzc8REt31WBkD99+hxNzjK4+FBmhkgS+NVrC9vjMSg@mail.gmail.com Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Tejun Heo authored
[ Upstream commit b4a04ab7 ] From 2d728f74bfc071df06773e2fd7577dd5dab6425d Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Wed, 13 May 2015 15:37:01 -0400 This patch separates out cgroup-defs.h from cgroup.h which has grown a lot of dependencies. cgroup-defs.h currently only contains constant and type definitions and can be used to break circular include dependency. While moving, definitions are reordered so that cgroup-defs.h has consistent logical structure. This patch is pure reorganization. Signed-off-by:
-
Bard Liao authored
[ Upstream commit b28785fa ] The shift bit of IN1 boost gain control is 12. Signed-off-by:
Bard Liao <bardliao@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
CQ Tang authored
[ Upstream commit fda3bec1 ] This is a 32-bit register. Apparently harmless on real hardware, but causing justified warnings in simulation. Signed-off-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 15 Feb, 2016 26 commits
-
-
Sasha Levin authored
Signed-off-by: -
David Howells authored
[ Upstream commit e7c87bef ] Don't strip leading zeros from the crypto key ID when using it to construct the struct key description as the signature in kernels up to and including 4.2 matched this aspect of the key. This means that 1 in 256 keys won't actually match if their key ID begins with 00. The key ID is stored in the module signature as binary and so must be converted to text in order to invoke request_key() - but it isn't stripped at this point. Something like this is likely to be observed in dmesg when the key is loaded: [ 1.572423] Loaded X.509 cert 'Build time autogenerated kernel key: 62a7c3d2da278be024da4af8652c071f3fea33' followed by this when we try and use it: [ 1.646153] Request for unknown module key 'Build time autogenerated kernel key: 0062a7c3d2da278be024da4af8652c071f3fea33' err -11 The 'Loaded' line should show an extra '00' on the front of the hex string. This problem should not affect 4.3-rc1 and onwards because there the key should be matched on one of its auxiliary identities rather than the key struct's description string. Reported-by:
Arjan van de Ven <arjan@linux.intel.com> Reported-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 73204282 ] Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 12352d3c ] Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
xuejiufei authored
[ Upstream commit c95a5180 ] When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by:
xuejiufei <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d7ce3692 ] Some servers experienced fatal deadlocks because of a combination of bugs, leading to multiple cpus calling dump_stack(). The checksumming bug was fixed in commit 34ae6a1a ("ipv6: update skb->csum when CE mark is propagated"). The second problem is a faulty locking in dump_stack() CPU1 runs in process context and calls dump_stack(), grabs dump_lock. CPU2 receives a TCP packet under softirq, grabs socket spinlock, and call dump_stack() from netdev_rx_csum_fault(). dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since dump_lock is owned by CPU1 While dumping its stack, CPU1 is interrupted by a softirq, and happens to process a packet for the TCP socket locked by CPU2. CPU1 spins forever in spin_lock() : deadlock Stack trace on CPU1 looked like : NMI backtrace for cpu 1 RIP: _raw_spin_lock+0x25/0x30 ... Call Trace: <IRQ> tcp_v6_rcv+0x243/0x620 ip6_input_finish+0x11f/0x330 ip6_input+0x38/0x40 ip6_rcv_finish+0x3c/0x90 ipv6_rcv+0x2a9/0x500 process_backlog+0x461/0xaa0 net_rx_action+0x147/0x430 __do_softirq+0x167/0x2d0 call_softirq+0x1c/0x30 do_softirq+0x3f/0x80 irq_exit+0x6e/0xc0 smp_call_function_single_interrupt+0x35/0x40 call_function_single_interrupt+0x6a/0x70 <EOI> printk+0x4d/0x4f printk_address+0x31/0x33 print_trace_address+0x33/0x3c print_context_stack+0x7f/0x119 dump_trace+0x26b/0x28e show_trace_log_lvl+0x4f/0x5c show_stack_log_lvl+0x104/0x113 show_stack+0x42/0x44 dump_stack+0x46/0x58 netdev_rx_csum_fault+0x38/0x3c __skb_checksum_complete_head+0x6e/0x80 __skb_checksum_complete+0x11/0x20 tcp_rcv_established+0x2bd5/0x2fd0 tcp_v6_do_rcv+0x13c/0x620 sk_backlog_rcv+0x15/0x30 release_sock+0xd2/0x150 tcp_recvmsg+0x1c1/0xfc0 inet_recvmsg+0x7d/0x90 sock_recvmsg+0xaf/0xe0 ___sys_recvmsg+0x111/0x3b0 SyS_recvmsg+0x5c/0xb0 system_call_fastpath+0x16/0x1b Fixes: b58d9774 ("dump_stack: serialize the output from dump_stack()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit 8bb4da1d ] While auditing various users of the connector/encoder lists I realized that the atomic code is a very prolific user of them. And it only ever grabs the mode_config->connection_mutex, but not the mode_config->mutex like all the other code walking encoder/connector lists. The problem is that we can't grab the mode_config.mutex late in atomic code since that would lead to locking inversions. And we don't want to grab it unconditionally like the legacy set_config modeset path since that would render all the fine-grained locking moot. Instead just grab more locks in the dp mst hotplug code. Note that drm_connector_init (which is the one adding the connector to these lists) already uses drm_modeset_lock_all. The other reason for grabbing all locks is that the dpms off in the unplug function amounts to a modeset, so better to take all required locks for that. Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit 2ee6bcdc ] Similar with the i915 take all modeset locks for mst hotplug. This is needed to make sure radeon holds both mode_config.mutex and mode_config.connection_mutex when updating the connector_list, which is the new (interim) locking regime we want for that. Reviewed-by:
-
Dave Airlie authored
[ Upstream commit df4839fd ] output ports should always have a connector, unless in the rare case connector allocation fails in the driver. In this case we only need to teardown the pdt, and free the struct, and there is no need to send a hotplug msg. In the case were we add the port to the destroy list we need to send a hotplug if we destroy any connectors, so userspace knows to reprobe stuff. this patch also handles port->connector allocation failing which should be a rare event, but makes the code consistent. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Maarten Lankhorst authored
[ Upstream commit 4772ff03 ] The port is removed synchronously, but the connector delayed. This causes a use after free which can cause a kernel BUG with slug_debug=FPZU. This is fixed by freeing the port after the connector. This fixes a regression introduced with 6b8eeca6 "drm/dp/mst: close deadlock in connector destruction." Cc: stable@vger.kernel.org Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Harry Wentland authored
[ Upstream commit a9ebb3e4 ] Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Harry Wentland authored
[ Upstream commit 64566b5e ] drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by:
-
Insu Yun authored
[ Upstream commit dabe1954 ] In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 418d5516 ] The DTSI file for the Nomadik does not properly specify how the PL180 levelshifter is connected: the Nomadik actually needs all the five st,sig-dir-* flags set to properly control all lines out. Further this board supports full power cycling of the card, and since this variant has no hardware clock gating, it needs a ridiculously low frequency setting to keep up with the ever overflowing FIFO. The pin configuration set-up is a bit of a mystery, because of course these pins are a mix of inputs and outputs. However the reference implementation sets all pins to "output" with unspecified initial value, so let's do that here as well. Cc: stable@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit ac75fe5d ] That prevents this bug: [ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540 [ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] PGD 0 [ 2382.270013] Oops: 0002 [#1] SMP [ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops] [ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4 [ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008 [ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000 [ 2382.270013] RIP: 0010:[<ffffffffa01fe616>] [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP: 0018:ffff88003c767ea0 EFLAGS: 00010286 [ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260 [ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0 [ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412 [ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8 [ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0 [ 2382.270013] FS: 00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000 [ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0 [ 2382.270013] Stack: [ 2382.270013] 000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8 [ 2382.270013] ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0 [ 2382.270013] ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c [ 2382.270013] Call Trace: [ 2382.270013] [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa] [ 2382.270013] [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0 [ 2382.270013] [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d [ 2382.270013] RIP [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP <ffff88003c767ea0> [ 2382.270013] CR2: 0000000000000540 Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 094fd3be ] In ALSA timer core, the active timer instance is managed in active_list linked list. Each element is added / removed dynamically at timer start, stop and in timer interrupt. The problem is that snd_timer_interrupt() has a thinko and leaves the element in active_list when it's the last opened element. This eventually leads to list corruption or use-after-free error. This hasn't been revealed because we used to delete the list forcibly in snd_timer_stop() in the past. However, the recent fix avoids the double-stop behavior (in commit [f784beb7: ALSA: timer: Fix link corruption due to double start or stop]), and this leak hits reality. This patch fixes the link management in snd_timer_interrupt(). Now it simply unlinks no matter which stream is. BugLink: http://lkml.kernel.org/r/CACT4Y+Yy2aukHP-EDp8-ziNqNNmb-NTf=jDWXMP7jB8HDa2vng@mail.gmail.comReported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit e8beb023 ] The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Cc: stable@vger.kernel.org Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit 5c821711 ] xhci driver frees data for all devices, both usb2 and and usb3 the first time usb_remove_hcd() is called, including td_list and and xhci_ring structures. When usb_remove_hcd() is called a second time for the second xhci bus it will try to dequeue all pending urbs, and touches td_list which is already freed for that endpoint. Cc: <stable@vger.kernel.org> Reported-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit ccc04afb ] Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well. Cc: stable@vger.kernel.org Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 92149c93 ] XHCI_SSIC_PORT_UNUSED quirk was applied to the xHCI host controllers in some Intel SoC chips. With this quirk applied, SSIC port is set to "unused" prior to xhci_suspend(). This may cause problem if host fails to suspend. In this case, the port is set to unused without host further entering D3, and the port will not be usable anymore. Cc: stable@vger.kernel.org Signed-off-by:
Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 7e70cbff ] Two workarounds introduced by commit b8cb91e0 ("xhci: Workaround for PME stuck issues in Intel xhci") and commit abce329c ("xhci: Workaround to get D3 working in Intel xHCI") share a single quirk bit XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and might happen on different hardwares. Need to separate them by adding a quirk bit for the later. Cc: stable@vger.kernel.org Signed-off-by:
-
Lu Baolu authored
[ Upstream commit fa895377 ] Commit abce329c ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit c840d6ce ] xhci versions 1.0 and later report the untransferred data remaining in a TD a bit differently than older hosts. We used to have separate functions for these, and needed to check host version before calling the right function. Now Mediatek host has an additional quirk on how it uses the TD Size field for remaining data. To prevent yet another function for calculating remainder we instead want to make one quirk friendly unified function. Tested-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
-
Lu, Baolu authored
[ Upstream commit 8451a34f ] Module xhci-pci and xhci-plat-hcd depend on xhci-hcd. Module xhci-hcd should be put at a place before xhci-pci and xhci-plat-hcd. Otherwise, xhci_hcd_init() might be executed after other functions in xhci-hcd if they are all selected to be built in. Signed-off-by:
-
Tomer Barletz authored
[ Upstream commit 2b7627b7 ] xhci_pme_quirk() is only used when CONFIG_PM is defined. Compiling a kernel without PM complains about this function [reworded commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by:
Tomer Barletz <barletz@gmail.com> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit c3c5819a ] Intel xhci hw that require XHCI_PME_STUCK quirk have as default disabled xhci from going to D3 state in runtime suspend. Driver needs to verify it can deal with the hw by calling an ACPI _DSM method to get D3 enabled. Signed-off-by:
-
