- 14 May, 2019 40 commits
-
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 6cbcf596 upstream. A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status. Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake. Add U1 and U2 to the possible link states when checking for finished port resume. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit ddba9180 upstream. KVM's API requires thats ioctls must be issued from the same process that created the VM. In other words, userspace can play games with a VM's file descriptors, e.g. fork(), SCM_RIGHTS, etc..., but only the creator can do anything useful. Explicitly reject device ioctls that are issued by a process other than the VM's creator, and update KVM's API documentation to extend its requirements to device ioctls. Fixes: 852b6d57 ("kvm: add device control API") Cc: <stable@vger.kernel.org> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit bebd024e upstream. The SMT disable 'nosmt' command line argument is not working properly when CONFIG_HOTPLUG_CPU is disabled. The teardown of the sibling CPUs which are required to be brought up due to the MCE issues, cannot work. The CPUs are then kept in a half dead state. As the 'nosmt' functionality has become popular due to the speculative hardware vulnerabilities, the half torn down state is not a proper solution to the problem. Enforce CONFIG_HOTPLUG_CPU=y when SMP is enabled so the full operation is possible. Reported-by:
Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit f3b4e06b upstream. A TSC packet can slip past MTC packets so that the timestamp appears to go backwards. One estimate is that can be up to about 40 CPU cycles, which is certainly less than 0x1000 TSC ticks, but accept slippage an order of magnitude more to be on the safe side. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 79b58424 ("perf tools: Add Intel PT support for decoding MTC packets") Link: http://lkml.kernel.org/r/20190325135135.18348-1-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Axel Lin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c5bc6e52 upstream. Current code test wrong value so it does not verify if the written data is correctly read back. Fix it. Also make it return -EPERM if read value does not match written bit, just like it done for adnp_gpio_direction_output(). Fixes: 5e969a40 ("gpio: Add Avionic Design N-bit GPIO expander support") Cc: <stable@vger.kernel.org> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Reviewed-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 23da9588 upstream. Syzkaller reports: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599 Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91 RSP: 0018:ffff8881d828f238 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8881e01b1140 RCX: ffffffff8ee98267 RDX: 0000000000000007 RSI: ffffc90001479000 RDI: ffff8881e01b1178 RBP: dffffc0000000000 R08: ffffed103ee27259 R09: ffffed103ee27259 R10: 0000000000000001 R11: ffffed103ee27258 R12: fffffffffffffff4 R13: 0000000000000006 R14: ffff8881f59838c0 R15: dffffc0000000000 FS: 00007f072254f700(0000) GS:ffff8881f7100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff8b286668 CR3: 00000001f0542002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0xbc/0x1000 [br_netfilter] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f072254ec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f072254ec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072254f6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 770020de38961fd0 ]--- A new dir entry can be created in get_subdir and its 'header->parent' is set to NULL. Only after insert_header success, it will be set to 'dir', otherwise 'header->parent' is set to NULL and drop_sysctl_table is called. However in err handling path of get_subdir, drop_sysctl_table also be called on 'new->header' regardless its value of parent pointer. Then put_links is called, which triggers NULL-ptr deref when access member of header->parent. In fact we have multiple error paths which call drop_sysctl_table() there, upon failure on insert_links() we also call drop_sysctl_table().And even in the successful case on __register_sysctl_table() we still always call drop_sysctl_table().This patch fix it. Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Wentao Wang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 3ec80029 upstream. Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd45316 ("kgdboc: Fix restrict error") Signed-off-by:
Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Bjørn Mork authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 84f3b43f upstream. This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Cc: stable@vger.kernel.org Signed-off-by:
Bjørn Mork <bjorn@mork.no> [ johan: use tabs to align comments in adjacent lines ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Mans Rullgard authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit f8df5c2c upstream. The SIMCom SIM5218 and compatible devices have 5 USB interfaces, only 4 of which are serial ports. The fifth is a network interface supported by the qmi-wwan driver. Furthermore, the serial ports do not support modem control signals. Add driver_info flags to reflect this. Signed-off-by:
Mans Rullgard <mans@mansr.com> Fixes: ec0cd94d ("usb: option: add SIMCom SIM5218") Cc: stable <stable@vger.kernel.org> # 3.2 Signed-off-by:
-
Lin Yi authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 2908b076 upstream. The write_parport_reg_nonblock() helper takes a reference to the struct mos_parport, but failed to release it in a couple of error paths after allocation failures, leading to a memory leak. Johan said that move the kref_get() and mos_parport assignment to the end of urbtrack initialisation is a better way, so move it. and mos_parport do not used until urbtrack initialisation. Signed-off-by:
Lin Yi <teroincn@163.com> Fixes: b69578df ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by:
-
George McCollister authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 422c2537 upstream. Add PIDs for the NovaTech OrionLX+ and Orion I/O so they can be automatically detected. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit a595ecdd upstream. Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by Silicon-Labs for the devices from this vendor. Reported-by:
Uli <t9cpu@web.de> Signed-off-by:
-
Hoan Nguyen An authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 93bcefd4 upstream. We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by:
Hoan Nguyen An <na-hoan@jinso.co.jp> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 3a10e3dd upstream. of_match_device can return a NULL pointer when matching device is not found. This patch avoids a scenario causing NULL pointer derefernce. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 3b9c2f2e upstream. It appears on some slower systems that the driver can find its way out of the workqueue while the interrupt is disabled by continuous polling by it. Move MACvIntEnable to vnt_interrupt_work so that it is always enabled on all routes out of vnt_interrupt_process. Move MACvIntDisable so that the device doesn't keep polling the system while the workqueue is being processed. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> CC: stable@vger.kernel.org # v4.2+ Signed-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit cc26358f upstream. A check for vif is made in vnt_interrupt_work. There is a small chance of leaving interrupt disabled while vif is NULL and the work hasn't been scheduled. Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c85be041 upstream. In case dmaengine_prep_dma_cyclic fails, the fix returns a proper error code to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Fixes: 34df42f5 ("serial: at91: add rx dma support") Acked-by:
Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 242ec145 upstream. Suppose more than one non-NPIV FCP device is active on the same channel. Send I/O to storage and have some of the pending I/O run into a SCSI command timeout, e.g. due to bit errors on the fibre. Now the error situation stops. However, we saw FCP requests continue to timeout in the channel. The abort will be successful, but the subsequent TUR fails. Scsi_eh starts. The LUN reset fails. The target reset fails. The host reset only did an FCP device recovery. However, for non-NPIV FCP devices, this does not close and reopen ports on the SAN-side if other non-NPIV FCP device(s) share the same open ports. In order to resolve the continuing FCP request timeouts, we need to explicitly close and reopen ports on the SAN-side. This was missing since the beginning of zfcp in v2.6.0 history commit ea127f97 ("[PATCH] s390 (7/7): zfcp host adapter."). Note: The FSF requests for forced port reopen could run into FSF request timeouts due to other reasons. This would trigger an internal FCP device recovery. Pending forced port reopen recoveries would get dismissed. So some ports might not get fully reopened during this host reset handler. However, subsequent I/O would trigger the above described escalation and eventually all ports would be forced reopen to resolve any continuing FCP request timeouts due to earlier bit errors. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #3.0+ Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit fe67888f upstream. An already deleted SCSI device can exist on the Scsi_Host and remain there because something still holds a reference. A new SCSI device with the same H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created. When we try to unblock an rport, we still find the deleted SCSI device and return early because the zfcp_scsi_dev of that SCSI device is not ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if the new proper SCSI device would be in good state. Therefore, skip deleted SCSI devices when iterating the sdevs of the shost. [cf. __scsi_device_lookup{_by_target}() or scsi_device_get()] The following abbreviated trace sequence can indicate such problem: Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 not ZFCP_STATUS_COMMON_UNBLOCKED Ready count : n not incremented yet Running count : 0x00000000 ERP want : 0x01 ERP need : 0xc1 ZFCP_ERP_ACTION_NONE Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x41000000 Ready count : n+1 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 ... Area : REC Level : 4 only with increased trace level Tag : ertru_l LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 Request ID : 0x0000000000000000 ERP status : 0x01800000 ERP step : 0x1000 ERP action : 0x01 ERP count : 0x00 NOT followed by a trace record with tag "scpaddy" for WWPN 0x50050763031bd327. Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c14a5726 upstream. The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and hence needs the disk->private_data pointer. Avoid that that pointer is cleared before all affected I/O requests have finished. This patch avoids that the following crash occurs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: scsi_mq_uninit_cmd+0x1c/0x30 scsi_end_request+0x7c/0x1b8 scsi_io_completion+0x464/0x668 scsi_finish_command+0xbc/0x160 scsi_eh_flush_done_q+0x10c/0x170 sas_scsi_recover_host+0x84c/0xa98 [libsas] scsi_error_handler+0x140/0x5b0 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Yan <yanaijie@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reported-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 113ce081 upstream. Currently PCM core sets each opened stream forcibly to SUSPENDED state via snd_pcm_suspend_all() call, and the user-space is responsible for re-triggering the resume manually either via snd_pcm_resume() or prepare call. The scheme works fine usually, but there are corner cases where the stream can't be resumed by that call: the streams still in OPEN state before finishing hw_params. When they are suspended, user-space cannot perform resume or prepare because they haven't been set up yet. The only possible recovery is to re-open the device, which isn't nice at all. Similarly, when a stream is in DISCONNECTED state, it makes no sense to change it to SUSPENDED state. Ditto for in SETUP state; which you can re-prepare directly. So, this patch addresses these issues by filtering the PCM streams to be suspended by checking the PCM state. When a stream is in either OPEN, SETUP or DISCONNECTED as well as already SUSPENDED, the suspend action is skipped. To be noted, this problem was originally reported for the PCM runtime PM on HD-audio. And, the runtime PM problem itself was already addressed (although not intended) by the code refactoring commits 3d21ef0b ("ALSA: pcm: Suspend streams globally via device type PM ops") and 17bc4815 ("ALSA: pci: Remove superfluous snd_pcm_suspend*() calls"). These commits eliminated the snd_pcm_suspend*() calls from the runtime PM suspend callback code path, hence the racy OPEN state won't appear while runtime PM. (FWIW, the race window is between snd_pcm_open_substream() and the first power up in azx_pcm_open().) Although the runtime PM issue was already "fixed", the same problem is still present for the system PM, hence this patch is still needed. And for stable trees, this patch alone should suffice for fixing the runtime PM problem, too. Reported-and-tested-by:
Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit ca0214ee upstream. The PCM OSS emulation converts and transfers the data on the fly via "plugins". The data is converted over the dynamically allocated buffer for each plugin, and recently syzkaller caught OOB in this flow. Although the bisection by syzbot pointed out to the commit 65766ee0 ("ALSA: oss: Use kvzalloc() for local buffer allocations"), this is merely a commit to replace vmalloc() with kvmalloc(), hence it can't be the cause. The further debug action revealed that this happens in the case where a slave PCM doesn't support only the stereo channels while the OSS stream is set up for a mono channel. Below is a brief explanation: At each OSS parameter change, the driver sets up the PCM hw_params again in snd_pcm_oss_change_params_lock(). This is also the place where plugins are created and local buffers are allocated. The problem is that the plugins are created before the final hw_params is determined. Namely, two snd_pcm_hw_param_near() calls for setting the period size and periods may influence on the final result of channels, rates, etc, too, while the current code has already created plugins beforehand with the premature values. So, the plugin believes that channels=1, while the actual I/O is with channels=2, which makes the driver reading/writing over the allocated buffer size. The fix is simply to move the plugin allocation code after the final hw_params call. Reported-by: syzbot+d4503ae45b65c5bc1194@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ravindra Lokhande authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c1036889 upstream. Compress offload does not support ioctl calls from a 32bit userspace in a 64 bit kernel. This patch adds support for ioctls from a 32bit userspace in a 64bit kernel Signed-off-by:
Ravindra Lokhande <rlokhande@nvidia.com> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Kohji Okuno authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 91740fc8 upstream. In the current cpuidle implementation for i.MX6q, the CPU that sets 'WAIT_UNCLOCKED' and the CPU that returns to 'WAIT_CLOCKED' are always the same. While the CPU that sets 'WAIT_UNCLOCKED' is in IDLE state of "WAIT", if the other CPU wakes up and enters IDLE state of "WFI" istead of "WAIT", this CPU can not wake up at expired time. Because, in the case of "WFI", the CPU must be waked up by the local timer interrupt. But, while 'WAIT_UNCLOCKED' is set, the local timer is stopped, when all CPUs execute "wfi" instruction. As a result, the local timer interrupt is not fired. In this situation, this CPU will wake up by IRQ different from local timer. (e.g. broacast timer) So, this fix changes CPU to return to 'WAIT_CLOCKED'. Signed-off-by:
Kohji Okuno <okuno.kohji@jp.panasonic.com> Fixes: e5f9dec8 ("ARM: imx6q: support WAIT mode using cpuidle") Cc: <stable@vger.kernel.org> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 2cc83342 upstream. When Filipe added the recursive directory logging stuff in 2f2ff0ee ("Btrfs: fix metadata inconsistencies after directory fsync") he specifically didn't take the directory i_mutex for the children directories that we need to log because of lockdep. This is generally fine, but can lead to this WARN_ON() tripping if we happen to run delayed deletion's in between our first search and our second search of dir_item/dir_indexes for this directory. We expect this to happen, so the WARN_ON() isn't necessary. Drop the WARN_ON() and add a comment so we know why this case can happen. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit bb9e5c5b ] The bug that Stan reported is as follows. After a restart, a 16-bit NIC may be incorrectly identified as a 32-bit NIC and stop working. mac8390 slot.E: Memory length resource not found, probing mac8390 slot.E: Farallon EtherMac II-C (type farallon) mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access. The bug never arises after a cold start and only intermittently after a warm start. (I didn't investigate why the bug is intermittent.) It turns out that memcpy_toio() is deprecated and memcmp_withio() also has issues. Replacing these calls with mmio accessors fixes the problem. Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f ("m68k: Mac DP8390 update") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 273160ff ] sctp_hdr(skb) only works when skb->transport_header is set properly. But in Netfilter, skb->transport_header for ipv6 is not guaranteed to be right value for sctphdr. It would cause to fail to check the checksum for sctp packets. So fix it by using offset, which is always right in all places. v1->v2: - Fix the changelog. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit cc4807bb ] Commit ad6c9986 ("vxlan: Fix GRO cells race condition between receive and link delete") fixed a race condition for the typical case a vxlan device is dismantled from the current netns. But if a netns is dismantled, vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue() of all the vxlan tunnels that are related to this netns. In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before unregister_netdevice_queue(). This means that the gro_cells_destroy() call is done too soon, for the same reasons explained in above commit. So we need to fully respect the RCU rules, and thus must remove the gro_cells_destroy() call or risk use after-free. Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by:
Suanming.Mou <mousuanming@huawei.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 89e41309 ] When a dual stack tcp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or tcp_v6_iif() helper. Fixes: 1397ed35 ("ipv6: add flowinfo for tcp6 pkt_options for all cases") Fixes: df3687ff ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Maxime Chevallier authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit a4dc6a49 ] When using fanouts with AF_PACKET, the demux functions such as fanout_demux_cpu will return an index in the fanout socket array, which corresponds to the selected socket. The ordering of this array depends on the order the sockets were added to a given fanout group, so for FANOUT_CPU this means sockets are bound to cpus in the order they are configured, which is OK. However, when stopping then restarting the interface these sockets are bound to, the sockets are reassigned to the fanout group in the reverse order, due to the fact that they were inserted at the head of the interface's AF_PACKET socket list. This means that traffic that was directed to the first socket in the fanout group is now directed to the last one after an interface restart. In the case of FANOUT_CPU, traffic from CPU0 will be directed to the socket that used to receive traffic from the last CPU after an interface restart. This commit introduces a helper to add a socket at the tail of a list, then uses it to register AF_PACKET sockets. Note that this changes the order in which sockets are listed in /proc and with sock_diag. Fixes: dc99f600 ("packet: Add fanout support") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 1602f49b upstream. [This commit was a merge, but it added hlist_add_tail_rcu(), which is what we need in this stable tree, so I've changed the subject to be more descriptive - gregkh] Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit e5dcc0c3 ] rose_write_internal() uses a temp buffer of 100 bytes, but a manual inspection showed that given arbitrary input, rose_create_facilities() can fill up to 110 bytes. Lets use a tailroom of 256 bytes for peace of mind, and remove the bounce buffer : we can simply allocate a big enough skb and adjust its length as needed. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline] BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline] BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854 CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:131 memcpy include/linux/string.h:352 [inline] rose_create_facilities net/rose/rose_subr.c:521 [inline] rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458079 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4 R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03 >ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3 ^ ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01 Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Christoph Paasch authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 398f0132 ] Since commit fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller found that that triggers a warning: [ 21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0 [ 21.101490] Modules linked in: [ 21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146 [ 21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630 [ 21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3 [ 21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246 [ 21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000 [ 21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000 [ 21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67 [ 21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d [ 21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d [ 21.112552] FS: 00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000 [ 21.113612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0 [ 21.115367] Call Trace: [ 21.115705] ? __alloc_pages_slowpath+0x21c0/0x21c0 [ 21.116362] alloc_pages_current+0xac/0x1e0 [ 21.116923] kmalloc_order+0x18/0x70 [ 21.117393] kmalloc_order_trace+0x18/0x110 [ 21.117949] packet_set_ring+0x9d5/0x1770 [ 21.118524] ? packet_rcv_spkt+0x440/0x440 [ 21.119094] ? lock_downgrade+0x620/0x620 [ 21.119646] ? __might_fault+0x177/0x1b0 [ 21.120177] packet_setsockopt+0x981/0x2940 [ 21.120753] ? __fget+0x2fb/0x4b0 [ 21.121209] ? packet_release+0xab0/0xab0 [ 21.121740] ? sock_has_perm+0x1cd/0x260 [ 21.122297] ? selinux_secmark_relabel_packet+0xd0/0xd0 [ 21.123013] ? __fget+0x324/0x4b0 [ 21.123451] ? selinux_netlbl_socket_setsockopt+0x101/0x320 [ 21.124186] ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0 [ 21.124908] ? __lock_acquire+0x529/0x3200 [ 21.125453] ? selinux_socket_setsockopt+0x5d/0x70 [ 21.126075] ? __sys_setsockopt+0x131/0x210 [ 21.126533] ? packet_release+0xab0/0xab0 [ 21.127004] __sys_setsockopt+0x131/0x210 [ 21.127449] ? kernel_accept+0x2f0/0x2f0 [ 21.127911] ? ret_from_fork+0x8/0x50 [ 21.128313] ? do_raw_spin_lock+0x11b/0x280 [ 21.128800] __x64_sys_setsockopt+0xba/0x150 [ 21.129271] ? lockdep_hardirqs_on+0x37f/0x560 [ 21.129769] do_syscall_64+0x9f/0x450 [ 21.130182] entry_SYSCALL_64_after_hwframe+0x49/0xbe We should allocate with __GFP_NOWARN to handle this. Cc: Kal Conley <kal.conley@dectris.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Bjorn Helgaas authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit fae846e2 ] The device ID alone does not uniquely identify a device. Test both the vendor and device ID to make sure we don't mistakenly think some other vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device ID table. No functional change intended. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit e0aa6770 ] When a dual stack dccp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or inet6_iif() helper. Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6") Signed-off-by:
-
Bhadram Varka authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit a830405e ] Currently stmmac driver not copying the valid ethernet MAC address to MAC registers. This patch takes care of updating the MAC register with MAC address. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 4ef8c1c9 ] Ilan reported that sometimes nl80211 messages weren't working if the frames being transported got very large, which was really a problem for userspace-to-kernel messages, but prompted me to look at the code. Upon review, I found various places where variable-length data is transported in an nl80211 message but the message isn't allocated taking that into account. This shouldn't cause any problems since the frames aren't really that long, apart in one place where two (possibly very long frames) might not fit. Fix all the places (that I found) that get variable length data from the driver and put it into a message to take the length of the variable data into account. The 100 there is just a safe constant for the remaining message overhead (it's usually around 50 for most messages.) Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Chaotian Jing authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 987aa5f8 ] with CONFIG_HZ=100, the precision of jiffies is 10ms, and the generic_cmd6_time of some card is also 10ms. then, may be current time is only 5ms, but already timed out caused by jiffies precision. Signed-off-by:
Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ezequiel Garcia authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 99a50777 ] The rtc-lib dependency is not required, and seems it was just copy-pasted from ARM's Kconfig. If platform requires rtc-lib, they should select it individually. Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Christoffer Dall authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit ace6033e ] User space Android code identifies pixclock == 0 as a sign for emulation and will set the frame rate to 60 fps when reading this value, which is the desired outcome. Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Peter Maydell <peter.maydell@linaro.org> Signed-off-by:
Roman Kiryanov <rkir@google.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
