- 31 Mar, 2023 38 commits
-
-
Alvin Lee authored
[Description] - On high refresh rate DRR displays that support VBLANK naturally, UCLK could be idling at DPM1 instead of DPM0 since it doesn't use FPO - To achieve DPM0, enable FPO on these configs even though it can support P-State without FPO - Default disable for now, have debug option to enable Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] While scanning the top_pipe connections we can run into a case where the bottom pipe is still connected to a top_pipe but with a NULL plane_state. [How] Treat a NULL plane_state the same as the plane being invisible for pipe cursor disable logic. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Hawking Zhang authored
Fix backward compatibility issue to stay with the old name of xgmi_wafl node. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Tim Huang authored
If the gfx imu is poweroff when suspend, then it need to be re-enabled when resume. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
Yifan Zha authored
[Why] Reset(mode1) failed as JPRG IP did not reinit under sriov. [How] Add JPEG IP block to sriov reinit function. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Reviewed-by:
Horace Chen <Horace.Chen@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Global variables do not need to be initialized to 0 or NULL and checkpatch flags this error in drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c: ERROR: do not initialise globals to NULL +char *amdgpu_disable_cu = NULL; +char *amdgpu_virtual_display = NULL; Fix this checkpatch error. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Hawking Zhang authored
Add GMC IP handling for GC 9.4.3 Signed-off-by:
Le Ma <Le.Ma@amd.com> Signed-off-by:
-
Le Ma authored
Initialize gfxhub1.2 and mmhub1.8 function calls Signed-off-by:
-
Le Ma authored
Hack the mmhub 1.7 reg offset for initial support v2: squash in header switch, CG funcs (Alex) Signed-off-by:
-
Hawking Zhang authored
Add mmhub v1_8_0 register offset and shift masks header files v2: update headers (Alex) Signed-off-by:
-
Le Ma authored
Hack the gc 9.0 reg offset for initial support v2: squash in header switch (Alex) Signed-off-by:
-
Hawking Zhang authored
Initialize various gmc sw/hw settings/configurations for GC 9.4.3. Signed-off-by:
-
Hawking Zhang authored
Add gc v9_4_3 register offset and shift masks header files v2: update headers (Alex) v3: more updates (Alex) Signed-off-by:
-
Hawking Zhang authored
Add osssys v4_4_2 register offset and shift masks header files v2: update headers (Alex) Signed-off-by:
-
Hawking Zhang authored
Add athub v1_8_0 register offset and shift masks header files v2: update headers (Alex) Signed-off-by:
-
Hawking Zhang authored
Set family for GC 9.4.3 Signed-off-by:
-
Hawking Zhang authored
switch to the new nbio generation for NBIO 7.9.0. Signed-off-by:
-
Hawking Zhang authored
v7_9 is a new nbio generation ip. Signed-off-by:
-
Hawking Zhang authored
Add nbio v7_9_0 register offset and shift masks header files v2: update headers (Alex) v3: squash in updates (Alex) Signed-off-by:
-
Thomas Zimmermann authored
Make building fbdev emulation depend on DRM_FBDEV_EMULATION. Also rename the source file to radeon_fbdev.c to align with other fbdev files. Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
Implement fbdev emulation on top of struct drm_client and its helpers. Replaces ad-hoc interfaces for restoring and closing fbdev emulation with per-client callbacks for hotplugging, restoring and unregistering. A single function, radeon_fbdev_setup(), starts fbdev emulation after the DRM device has been registered. Hence, fbdev acts like a regular DRM client. The setup call prepares the fbdev emulation and invokes connector hotplugging. The first successful hotplug event initializes fbdev emulation with a framebuffer, device file, etc. Unregistering depends on the hotplug status. Fully initialized emulation is cleaned up through drm_fb_helper_unregister_info() and fb_destroy. For prepared-only setups, unregistering unprepares the emulation and releases all resources. In both cases, fbdev emulation will be cleaned up. Reviewed-by:
-
Thomas Zimmermann authored
Improve the fbdev probing function to fully clean up if it failed. Allows to remove special cases from fb_destroy as well. This change is reorders the operations within radeonfb_probe(). It first allocates a buffer object, then builds a DRM framebuffer for the object and finally creates the fbdev device. If every step succeeded, the probe function clears the framebuffer memory. This is the optimal order to rollback any changes if any of the steps fails. No functional changes. Reviewed-by:
-
Thomas Zimmermann authored
Fbdev calls struct fb_ops.fb_destroy after cleaning up the final reference to an fbdev framebuffer. Move radeon's fbdev cleanup code there. Reviewed-by:
-
Thomas Zimmermann authored
Fix the coding style in several places in the fbdev-emulation code. Also rename functions and structure file by comments. No functional changes. Reviewed-by:
-
Thomas Zimmermann authored
Move the helpers for creating and destroying fbdev GEM objects to the top of the source file. Makes them available to fb_ops functions. This will allow to implement framebuffer cleanup in fb_destroy. No functional changes. Reviewed-by:
-
Thomas Zimmermann authored
The screen_base field comes from the fbdev BO and contains the fbdev framebuffer base address. We get the BO memory via radeon_bo_kmap(), which already reports the error -ENOMEM if the buffer could not be mapped. So remove the later test for screen_base, which will never be NULL at this point. Reviewed-by:
-
Thomas Zimmermann authored
Both data fields in struct radeon_fbdev, the framebuffer and the device, are already available in struct drm_fb_helper. Simplify radeon by converting all callers and removing struct radeon_fbdev. Reviewed-by:
-
Thomas Zimmermann authored
Look up the framebuffer GEM object in fbdev object test with the respective helper drm_gem_fb_get_obj(). The look-up helper warns if no GEM object has been installed. Upcasting types prevents runtime type checking, so avoid upcast to struct radeon_bo. Reviewed-by:
-
Thomas Zimmermann authored
Move radeon_align_pitch() next to its caller in the dumb-buffer code. Removes the only dependency on the radeon's fbdev source file that is not related to fbdev emulation. No functional changes. Reviewed-by:
-
Srinivasan Shanmugam authored
Global variables do not need to be initialized to 0 and checkpatch flags this error in drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c: ERROR: do not initialise globals to 0 +int amdgpu_no_queue_eviction_on_vm_fault = 0; Fix this checkpatch error. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Hamza Mahfooz <Hamza.Mahfooz@amd.com> Signed-off-by:
-
Luben Tuikov authored
As soon as control->i2c_address is set, return; remove the "break;" from the switch--it is unnecessary. This mimics what happens when for some cases in the switch, we call helper functions with "return <helper function>". Remove final function "return true;" to indicate that the switch is final and terminal, and that there should be no code after the switch. Cc: Candice Li <candice.li@amd.com> Cc: Kent Russell <kent.russell@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
-
Luben Tuikov authored
Remove second switch since it already has its own function and case in the first switch. This also avoids requalifying the EEPROM I2C address for VEGA20, SIENNA CICHLID, and ALDEBARAN, as those have been set by the first switch and shouldn't match SMU v13.0.x. Cc: Candice Li <candice.li@amd.com> Cc: Kent Russell <kent.russell@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Fixes: 15822529 ("drm/amdgpu: Add EEPROM I2C address for smu v13_0_0") Fixes: c9bdc6c3 ("drm/amdgpu: Add EEPROM I2C address support for ip discovery") Signed-off-by:
-
Stanley.Yang authored
Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Candice Li <candice.li@amd.com> Signed-off-by:
-
Hawking Zhang authored
GPU will stop working once fatal error is detected. it will inform driver to do reset to recover from the fatal error. v2: squash in logic fix (Srinivasan) v3: squash in logic fix (Dan) Signed-off-by:
-
Hans de Goede authored
The parent for the backlight device should be the drm-connector object, not the PCI device. Userspace relies on this to be able to detect which backlight class device to use on hybrid gfx devices where there may be multiple native (raw) backlight devices registered. Specifically gnome-settings-daemon expects the parent device to have an "enabled" sysfs attribute (as drm_connector devices do) and tests that this returns "enabled" when read. This aligns the parent of the backlight device with i915, nouveau, radeon. Note that drivers/gpu/drm/amd/amdgpu/atombios_encoders.c also already uses the drm_connector as parent, only amdgpu_dm.c used the PCI device as parent before this change. Changes in v3: Make amdgpu_dm_register_backlight_device() check bl_idx != 1 before registering the backlight since amdgpu_dm_connector_late_register() now calls it for _all_ connectors. Changes in v2: Together with changing the parent, also move the registration to drm_connector_funcs.late_register() this is necessary because the parent device (which now is the drm_connector) must be registered before the backlight class device is, otherwise the backlight class device ends up without any parent set at all. This brings the backlight class device registration timing inline with nouveau and i915 which also use drm_connector_funcs.late_register() for this. Note this slightly changes backlight_device_register() error handling, instead of not increasing dm->num_of_edps and re-using the current bl_idx for a potential other backlight device, dm->backlight_dev[bl_idx] is now simply left NULL on failure. This is ok because all code looking at dm->backlight_dev[i] also checks it is not NULL. Link: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Make amdgpu_dm_register_backlight_device() take an amdgpu_dm_connector pointer to the connector for which it should register the backlight as its only argument. This is a preparation patch for moving the actual backlight class device registering to drm_connector_funcs.late_register. Reviewed-by:
-
Hans de Goede authored
Rename register_backlight_device() to setup_backlight_device() and move all backlight setup related calls from amdgpu_dm_register_backlight_device() and from amdgpu_dm_initialize_drm_device() there. This leaves amdgpu_dm_register_backlight_device() dealing purely with registering the actual backlight class device. This is a preparation patch for moving the actual backlight class device registering to drm_connector_funcs.late_register. Reviewed-by:
-
Hans de Goede authored
Currently functions like update_connector_ext_caps() and amdgpu_dm_connector_destroy() are iterating over dm->backlight_link[i] to find the index of the (optional) backlight_dev associated with the connector. Instead make register_backlight_device() store the dm->backlight_dev[] index used for the connector inside the amdgpu_dm_connector struct. This removes the need to iterate over the dm->backlight_link[] array and this is necessary as a preparation patch for moving the actual backlight_device_register() call to drm_connector_funcs.late_register. While reworking update_connector_ext_caps() also remove the aconnector and aconnector->dc_link NULL checks in this function. These are both never NULL and are unconditionally derefed in its callers. Reviewed-by:
-
- 27 Mar, 2023 2 commits
-
-
Christophe JAILLET authored
A kzalloc()+memcpy() can be optimized in a single kmemdup(). This saves a few cycles because some memory doesn't need to be zeroed. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Jiapeng Chong authored
Variable dppclk_delay_subtotal is not effectively used, so delete it. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1004:15: warning: variable 'dppclk_delay_subtotal' set but not used. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4584Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
