- 03 Jan, 2024 2 commits
-
-
Ricardo Neri authored
Previously, HFI instances were never disabled once enabled. A CPU in an instance only had to check during boot whether another CPU had previously initialized the instance and its corresponding data structure. A subsequent changeset will add functionality to disable instances to support hibernation. Such change will also make possible to disable an HFI instance during runtime via CPU hotplug. Enable an HFI instance from the first of its CPUs that comes online. This covers the boot, CPU hotplug, and resume-from-suspend cases. It also covers systems with one or more HFI instances (i.e., packages). Signed-off-by:
Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Ricardo Neri authored
In preparation for the addition of a suspend notifier, wrap the logic to enable HFI and program its memory buffer into helper functions. Both the CPU hotplug callback and the suspend notifier will use them. This refactoring does not introduce functional changes. Signed-off-by:
-
- 02 Jan, 2024 25 commits
-
-
Rafael J. Wysocki authored
Merge tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal Merge thermal control material for 6.8-rc1 from Daniel Lezcano: "- Converted Mediatek Thermal to the json-schema (Rafał Miłecki) - Fixed DT bindings issue on Loongson (Binbin Zhou) - Fixed returning NULL instead of -ENODEV on Loogsoo (Binbin Zhou) - Added the DT binding for the tsens on SM8650 platform (Neil Armstrong) - Added a reboot on critical option feature (Fabio Estevam) - Made usage of DEFINE_SIMPLE_DEV_PM_OPS on AmLogic (Uwe Kleine-König) - Added the D1/T113s THS controller support on Sun8i (Maxim Kiselev) - Fixed example in the DT binding for QCom SPMI (Johan Hovold) - Fixed compilation warning for the tmon utility (Florian Eckert) - Added interrupt based configuration on Exynos along with a set of related cleanups (Mateusz Majewski)" * tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits) thermal/drivers/exynos: Use set_trips ops thermal/drivers/exynos: Use BIT wherever possible thermal/drivers/exynos: Split initialization of TMU and the thermal zone thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210 thermal/drivers/exynos: Simplify regulator (de)initialization thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts thermal/drivers/exynos: Drop id field thermal/drivers/exynos: Remove an unnecessary field description tools/thermal/tmon: Fix compilation warning for wrong format dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names thermal/drivers/sun8i: Add D1/T113s THS controller support dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions thermal: amlogic: Make amlogic_thermal_disable() return void thermal/thermal_of: Allow rebooting after critical temp reboot: Introduce thermal_zone_device_critical_reboot() thermal/core: Prepare for introduction of thermal reboot dt-bindings: thermal-zones: Document critical-action ...
-
Mateusz Majewski authored
Currently, each trip point defined in the device tree corresponds to a single hardware interrupt. This commit instead switches to using two hardware interrupts, whose values are set dynamically using the set_trips callback. Additionally, the critical temperature threshold is handled specifically. Setting interrupts in this way also fixes a long-standing lockdep warning, which was caused by calling thermal_zone_get_trips with our lock being held. Do note that this requires TMU initialization to be split into two parts, as done by the parent commit: parts of the initialization call into the thermal_zone_device structure and so must be done after its registration, but the initialization is also responsible for setting up calibration, which must be done before thermal_zone_device registration, which will call set_trips for the first time; if the calibration is not done in time, the interrupt values will be silently wrong! Reviewed-by:
Lukasz Luba <lukasz.luba@arm.com> Signed-off-by:
Mateusz Majewski <m.majewski2@samsung.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20231201095625.301884-10-m.majewski2@samsung.com
-
Mateusz Majewski authored
The original driver did not use that macro and it allows us to make our intentions slightly clearer. Reviewed-by:
-
Mateusz Majewski authored
This will be needed in the future, as the thermal zone subsystem might call our callbacks right after devm_thermal_of_zone_register. Currently we just make get_temp return EAGAIN in such case, but this will not be possible with state-modifying callbacks, for instance set_trips. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Mateusz Majewski authored
Exynos 4210 supports setting a base threshold value, which is added to all trip points. This might be useful, but is not really necessary in our usecase, so we always set it to 0 to simplify the code a bit. Additionally, this change makes it so that we convert the value to the calibrated one in a slightly different place. This is more correct morally, though it does not make any change when single-point calibration is being used (which is the case currently). Reviewed-by:
-
Mateusz Majewski authored
We rewrite the initialization to enable the regulator as part of devm, which allows us to not handle the struct instance manually. Reviewed-by:
-
Mateusz Majewski authored
Currently, if regulator is required in the SoC, but devm_regulator_get_optional fails for whatever reason, the execution will proceed without propagating the error. Meanwhile there is no reason to output the error in case of -ENODEV. Reviewed-by:
-
Mateusz Majewski authored
The workqueue boilerplate is mostly one-to-one what the threaded interrupts do. Reviewed-by:
-
Mateusz Majewski authored
We do not use the value, and only Exynos 7 defines this alias anyway. Reviewed-by:
-
Mateusz Majewski authored
It seems that the field has been removed in one of the previous commits, but the description has been forgotten. Reviewed-by:
-
Florian Eckert authored
The following warnings are shown during compilation: tui.c: In function 'show_cooling_device': tui.c:216:40: warning: format '%d' expects argument of type 'int', but argument 7 has type 'long unsigned int' [-Wformat=] 216 | "%02d %12.12s%6d %6d", | ~~^ | | | int | %6ld ...... 219 | ptdata.cdi[j].cur_state, | ~~~~~~~~~~~~~~~~~~~~~~~ | | | long unsigned int tui.c:216:44: warning: format '%d' expects argument of type 'int', but argument 8 has type 'long unsigned int' [-Wformat=] 216 | "%02d %12.12s%6d %6d", | ~~^ | | | int | %6ld ...... 220 | ptdata.cdi[j].max_state); | ~~~~~~~~~~~~~~~~~~~~~~~ | | | long unsigned int To fix this, the correct string format must be used for printing. Signed-off-by:Florian Eckert <fe@dev.tdt.de> Signed-off-by:
-
Johan Hovold authored
Clean up the examples by adding newline separators, moving 'reg' properties after 'compatible' and dropping unused labels. Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Acked-by:
-
Johan Hovold authored
The ADC Thermal Monitor is part of an SPMI PMIC, which in turn sits on an SPMI bus. Fixes: db03874b ("dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings") Fixes: e8ffd6c0 ("dt-bindings: thermal: qcom: add adc-thermal monitor bindings") Signed-off-by:
-
Maxim Kiselev authored
This patch adds a thermal sensor controller support for the D1/T113s, which is similar to the one on H6, but with only one sensor and different scale and offset values. Signed-off-by:
Maxim Kiselev <bigunclemax@gmail.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Maxim Kiselev authored
Add a binding for D1/T113s thermal sensor controller. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Uwe Kleine-König authored
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to care about when the functions are actually used, so the corresponding __maybe_unused can be dropped. Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM isn't enabled. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
amlogic_thermal_disable() returned zero unconditionally and amlogic_thermal_remove() already ignores the return value. Make it return no value and modify amlogic_thermal_suspend to not check the value. This patch introduces no semantic changes, but makes it more obvious for a human reader that amlogic_thermal_suspend() cannot fail. Signed-off-by:
-
Fabio Estevam authored
Currently, the default mechanism is to trigger a shutdown after the critical temperature is reached. In some embedded cases, such behavior does not suit well, as the board may be unattended in the field and rebooting may be a better approach. The bootloader may also check the temperature and only allow the boot to proceed when the temperature is below a certain threshold. Introduce support for allowing a reboot to be triggered after the critical temperature is reached. If the "critical-action" devicetree property is not found, fall back to the shutdown action to preserve the existing default behavior. If a custom ops->critical exists, then it takes preference over critical-actions. Tested on a i.MX8MM board with the following devicetree changes: thermal-zones { cpu-thermal { critical-action = "reboot"; }; }; Signed-off-by:Fabio Estevam <festevam@denx.de> Signed-off-by:
-
Fabio Estevam authored
Introduce thermal_zone_device_critical_reboot() to trigger an emergency reboot. It is a counterpart of thermal_zone_device_critical() with the difference that it will force a reboot instead of shutdown. The motivation for doing this is to allow the thermal subystem to trigger a reboot when the temperature reaches the critical temperature. Signed-off-by:
-
Fabio Estevam authored
Add some helper functions to make it easier introducing the support for thermal reboot. No functional change. Signed-off-by:
-
Fabio Estevam authored
Document the critical-action property to describe the thermal action the OS should perform after the critical temperature is reached. The possible values are "shutdown" and "reboot". The motivation for introducing the critical-action property is that different systems may need different thermal actions when the critical temperature is reached. For example, in a desktop PC, it is desired that a shutdown happens after the critical temperature is reached. However, in some embedded cases, such behavior does not suit well, as the board may be unattended in the field and rebooting may be a better approach. The bootloader may also benefit from this new property as it can check the SoC temperature and in case the temperature is above the critical point, it can trigger a shutdown or reboot accordingly. Signed-off-by:
-
Neil Armstrong authored
Document the Temperature Sensor (TSENS) on the SM8650 Platform. Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Binbin Zhou authored
PTR_ERR() returns -ENODEV when thermal-zones are undefined, and we need -ENODEV as the right value for comparison. Otherwise, tz->type is NULL when thermal-zones is undefined, resulting in the following error: [ 12.290030] CPU 1 Unable to handle kernel paging request at virtual address fffffffffffffff1, era == 900000000355f410, ra == 90000000031579b8 [ 12.302877] Oops[#1]: [ 12.305190] CPU: 1 PID: 181 Comm: systemd-udevd Not tainted 6.6.0-rc7+ #5385 [ 12.312304] pc 900000000355f410 ra 90000000031579b8 tp 90000001069e8000 sp 90000001069eba10 [ 12.320739] a0 0000000000000000 a1 fffffffffffffff1 a2 0000000000000014 a3 0000000000000001 [ 12.329173] a4 90000001069eb990 a5 0000000000000001 a6 0000000000001001 a7 900000010003431c [ 12.337606] t0 fffffffffffffff1 t1 54567fd5da9b4fd4 t2 900000010614ec40 t3 00000000000dc901 [ 12.346041] t4 0000000000000000 t5 0000000000000004 t6 900000010614ee20 t7 900000000d00b790 [ 12.354472] t8 00000000000dc901 u0 54567fd5da9b4fd4 s9 900000000402ae10 s0 900000010614ec40 [ 12.362916] s1 90000000039fced0 s2 ffffffffffffffed s3 ffffffffffffffed s4 9000000003acc000 [ 12.362931] s5 0000000000000004 s6 fffffffffffff000 s7 0000000000000490 s8 90000001028b2ec8 [ 12.362938] ra: 90000000031579b8 thermal_add_hwmon_sysfs+0x258/0x300 [ 12.386411] ERA: 900000000355f410 strscpy+0xf0/0x160 [ 12.391626] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 12.397898] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 12.403678] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 12.409859] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 12.415882] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 12.415907] BADV: fffffffffffffff1 [ 12.415911] PRID: 0014a000 (Loongson-64bit, Loongson-2K1000) [ 12.415917] Modules linked in: loongson2_thermal(+) vfat fat uio_pdrv_genirq uio fuse zram zsmalloc [ 12.415950] Process systemd-udevd (pid: 181, threadinfo=00000000358b9718, task=00000000ace72fe3) [ 12.415961] Stack : 0000000000000dc0 54567fd5da9b4fd4 900000000402ae10 9000000002df9358 [ 12.415982] ffffffffffffffed 0000000000000004 9000000107a10aa8 90000001002a3410 [ 12.415999] ffffffffffffffed ffffffffffffffed 9000000107a11268 9000000003157ab0 [ 12.416016] 9000000107a10aa8 ffffff80020fc0c8 90000001002a3410 ffffffffffffffed [ 12.416032] 0000000000000024 ffffff80020cc1e8 900000000402b2a0 9000000003acc000 [ 12.416048] 90000001002a3410 0000000000000000 ffffff80020f4030 90000001002a3410 [ 12.416065] 0000000000000000 9000000002df6808 90000001002a3410 0000000000000000 [ 12.416081] ffffff80020f4030 0000000000000000 90000001002a3410 9000000002df2ba8 [ 12.416097] 00000000000000b4 90000001002a34f4 90000001002a3410 0000000000000002 [ 12.416114] ffffff80020f4030 fffffffffffffff0 90000001002a3410 9000000002df2f30 [ 12.416131] ... [ 12.416138] Call Trace: [ 12.416142] [<900000000355f410>] strscpy+0xf0/0x160 [ 12.416167] [<90000000031579b8>] thermal_add_hwmon_sysfs+0x258/0x300 [ 12.416183] [<9000000003157ab0>] devm_thermal_add_hwmon_sysfs+0x50/0xe0 [ 12.416200] [<ffffff80020cc1e8>] loongson2_thermal_probe+0x128/0x200 [loongson2_thermal] [ 12.416232] [<9000000002df6808>] platform_probe+0x68/0x140 [ 12.416249] [<9000000002df2ba8>] really_probe+0xc8/0x3c0 [ 12.416269] [<9000000002df2f30>] __driver_probe_device+0x90/0x180 [ 12.416286] [<9000000002df3058>] driver_probe_device+0x38/0x160 [ 12.416302] [<9000000002df33a8>] __driver_attach+0xa8/0x200 [ 12.416314] [<9000000002deffec>] bus_for_each_dev+0x8c/0x120 [ 12.416330] [<9000000002df198c>] bus_add_driver+0x10c/0x2a0 [ 12.416346] [<9000000002df46b4>] driver_register+0x74/0x160 [ 12.416358] [<90000000022201a4>] do_one_initcall+0x84/0x220 [ 12.416372] [<90000000022f3ab8>] do_init_module+0x58/0x2c0 [ 12.416386] [<90000000022f6538>] init_module_from_file+0x98/0x100 [ 12.416399] [<90000000022f67f0>] sys_finit_module+0x230/0x3c0 [ 12.416412] [<900000000358f7c8>] do_syscall+0x88/0xc0 [ 12.416431] [<900000000222137c>] handle_syscall+0xbc/0x158 Fixes: e7e3a7c3 ("thermal/drivers/loongson-2: Add thermal management support") Cc: Yinbo Zhu <zhuyinbo@loongson.cn> Signed-off-by:
Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by:
-
Binbin Zhou authored
Add the missing 'thermal-sensor-cells' property which is required for every thermal sensor as it's used when using phandles. And add the thermal-sensor.yaml reference. In fact, it was a careless mistake when submitting the driver that caused it to not work properly. So the fix is necessary, although it will result in the ABI break. Fixes: 72684d99 ("thermal: dt-bindings: add loongson-2 thermal") Cc: Yinbo Zhu <zhuyinbo@loongson.cn> Signed-off-by:
-
Rafał Miłecki authored
This helps validating DTS files. Introduced changes: 1. Improved title 2. Simplified description (dropped "This describes the device tree...") 3. Dropped undocumented "reset-names" from example Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
- 29 Dec, 2023 9 commits
-
-
Lukasz Luba authored
When the thermal instance's weight is updated from the sysfs the governor update_tz() callback is triggered. Implement proper reaction to this event in the IPA, which would save CPU cycles spent in throttle(). This will speed-up the main throttle() IPA function and clean it up a bit. Signed-off-by:
-
Lukasz Luba authored
Support governors update when the thermal instance's weight has changed. This allows to adjust internal state for the governor. Signed-off-by:
-
Lukasz Luba authored
User space can change the weight of a thermal instance via sysfs while the .throttle() callback is running for a governor, because weight_store() does not use the zone lock. The IPA governor uses instance weight values for power calculations and caches the sum of them as total_weight, so it gets confused when one of them changes while its .throttle() callback is running. To prevent that from happening, use thermal zone locking in weight_store(). Signed-off-by:
-
Lukasz Luba authored
There is a need to check if the cooling device in the thermal zone supports IPA callback and is set for control trip point. Refactor the code which validates the power actor capabilities and make it more consistent in all places. No intentional functional impact. Signed-off-by:
-
Lukasz Luba authored
The new thermal callback allows to react to the change of cooling instances in the thermal zone. Move the memory allocation to that new callback and save CPU cycles in the throttle() code path. Signed-off-by:
-
Lukasz Luba authored
Change trace event trace_thermal_power_allocator() to not use dynamic array for requested power and granted power for all power actors. Instead, simplify the trace event and print other simple values. Add new trace event to print power actor information of requested power and granted power. That trace event would be called in a loop for each power actor. The trace data would be easier to parse comparing to the dynamic array implementation. Signed-off-by:
-
Lukasz Luba authored
Simplify the code and remove one extra 'if' block. No intentional functional impact. Signed-off-by:
-
Lukasz Luba authored
In preparation for a subsequent change, rearrange check_power_actors(). No intentional functional impact. Signed-off-by:
-
Lukasz Luba authored
Add a new callback to the struct thermal_governor. It can be used for updating governors when there is a change in the thermal zone internals, e.g. thermal cooling device is bind to the thermal zone. That makes possible to move some heavy operations like memory allocations related to the number of cooling instances out of the throttle() callback. Both callback code paths (throttle() and update_tz()) are protected with the same thermal zone lock, which guaranties the consistency. Signed-off-by:
-
- 28 Dec, 2023 4 commits
-
-
Stanislaw Gruszka authored
Add a helper function to check if there are listeners for thermal_gnl_family multicast groups. For now use it to avoid unnecessary allocations and sending thermal genl messages when there are no recipients. In the future, in conjunction with (not yet implemented) notification of change in the netlink socket group membership, this helper can be used to open/close hardware interfaces based on the presence of user space subscribers. Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Acked-by:
-
Stanislaw Gruszka authored
Use enum instead of hard-coded numbers for indexing multicast groups. Signed-off-by:
-
Rafael J. Wysocki authored
The resume of thermal zones in thermal_pm_notify() is carried out sequentially, which may be a problem if __thermal_zone_device_update() takes a significant time to run for some thermal zones, because some other thermal zones may need to wait for them to resume then and if any other PM notifiers are going to be invoked after the thermal one, they will need to wait for it either. To address this, make thermal_pm_notify() switch the poll_queue delayed work over to a one-shot thermal_zone_device_resume() work function that will restore the original one during the thermal zone resume and queue up poll_queue without a delay for each thermal zone. Link: https://lore.kernel.org/linux-pm/20231120234015.3273143-1-radusolea@google.com/Reported-by:
Radu Solea <radusolea@google.com> Signed-off-by:
-
Rafael J. Wysocki authored
In preparation for a subsequent change, move the initialization of the poll_queue delayed work from thermal_zone_device_register_with_trips() to thermal_zone_device_init() which is called by the former. However, because thermal_zone_device_init() is also called by thermal_pm_notify(), make the latter call cancel_delayed_work() on poll_queue before invoking the former, so as to allow the work item to be re-initialized safely. Also move thermal_zone_device_check() which needs to be defined before thermal_zone_device_init(), so the latter can pass it to the INIT_DELAYED_WORK() macro. Signed-off-by:
-
