- 10 Apr, 2023 11 commits
-
-
Rob Herring authored
The 'adi,custom-thermocouple' property is signed based on the example and driver, so it's type should be int64-matrix rather than uint64-matrix. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230404205014.644336-2-robh@kernel.orgSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Rob Herring authored
The child node schemas are missing 'unevaluatedProperties' constraints, so any unknown properties are allowed. The current structure with multiple patternProperties schemas doesn't work for unevaluatedProperties as each sub-schema is evaluated independently. To fix this, move the sub-schema for all child nodes to a $defs entry and reference it from each named child node. Signed-off-by:
-
William Breathitt Gray authored
ADC sample captures take a certain amount of time to complete after initiated; this conversion time range can be anywhere from 5 microseconds to 53.68 seconds depending on the configuration of the Analog Input Frame Timer register. When the conversion is in progress, the ADC Status register CNV bit is high. Call regmap_read_poll_timeout() to poll until the ADC conversion is completed (or timeout if more than 53.68 seconds passes). Suggested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/9ef433f107afd1d4dcd2d97ef0e932d7045c2bbd.1680790580.git.william.gray@linaro.orgSigned-off-by:
-
William Breathitt Gray authored
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. In addition, to improve code organization in stx104_probe(), the devm_iio_device_register() call is moved above GPIO configuration in order to keep relevant code closer together. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
William Breathitt Gray authored
By bailing out early if chan->output is false for the IIO_CHAN_INFO_RAW, indentation can be decreased by a tab and code readability improved. Suggested-by:
-
William Breathitt Gray authored
The DAC register is 16 bits wide, so the value passed by write_raw() should be checked against that limit. Rather than hardcoding the 16-bit maximum value limit, use a define to improve readability and make the intention of the code clearer. The explicit cast is also avoided by instead explicitly checking for negative values. Suggested-by:
-
William Breathitt Gray authored
The ADC conversion procedure requires several device I/O operations performed in a particular sequence. If stx104_read_raw() is called concurrently, the ADC conversion procedure could be clobbered. Prevent such a race condition by utilizing a mutex. Fixes: 4075a283 ("iio: stx104: Add IIO support for the ADC channels") Signed-off-by:
-
William Breathitt Gray authored
The priv->chan_out_states array and actual DAC value can become mismatched if stx104_write_raw() is called concurrently. Prevent such a race condition by utilizing a mutex. Fixes: 97a445da ("iio: Add IIO support for the DAC on the Apex Embedded Systems STX104") Signed-off-by:
-
Linus Walleij authored
The description oddly contains a copy of the initial paragraph. Let's not repeat ourselves. Suggested-by:
Diederik de Haas <didi.debian@cknow.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230329074614.1037625-1-linus.walleij@linaro.orgSigned-off-by:
-
Nuno Sá authored
As stated in the device datasheet [1], bits a0 and a1 have to be set to 1 for the configuration mode. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf Fixes: b19e9ad5 ("staging:iio:resolver:ad2s1210 general driver cleanup") Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.comSigned-off-by:
-
Dan Carpenter authored
This code has a copy and paste bug so it accidentally returns "PTR_ERR(data->reg_vdd)" which is a valid pointer cast to int. It should return "ret" instead. Fixes: 54188054 ("iio: adc: Add TI ADS1100 and ADS1000") Signed-off-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/36fa2aeb-f392-4793-8b38-ae15514033c8@kili.mountainSigned-off-by:
-
- 19 Mar, 2023 3 commits
-
-
Stefan Wahren authored
Since the ST IIS328DQ accelerometer is compatible to the ST LIS331DL, just add the new compatible to the st_accel framework. Link: https://www.st.com/resource/en/datasheet/iis328dq.pdfSigned-off-by:
Stefan Wahren <stefan.wahren@chargebyte.com> Link: https://lore.kernel.org/r/20230317103323.7741-6-stefan.wahren@chargebyte.comSigned-off-by:
-
Stefan Wahren authored
The ST IIS328DQ is an accelerometer sensor, which is compatible with the already supported ST H3LIS331DL. So add the new compatible with a fallback to the ST sensor binding. Link: https://lore.kernel.org/linux-iio/2bac9ecf-9d2e-967e-9020-1c950487d781@i2se.com/Suggested-by:
-
William Breathitt Gray authored
The <linux/bitops.h> header is included in the stx104 driver so that we can use the BIT() macro. This macro is actually defined in the <linux/bits.h> header, so replace the <linux/bitops.h> header inclusion with <linux/bits.h>. Signed-off-by:
-
- 18 Mar, 2023 4 commits
-
-
William Breathitt Gray authored
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. Includes trivial header inclusion tidy up. Suggested-by:
-
Uwe Kleine-König authored
Make use of devm_clk_get_enabled() to replace some code that effectively open codes this new function. To retain ordering move the request to a place that is executed later. This way the time of enable keeps the same. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230313185333.2776785-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Cheng Ziqiu authored
From the comment of platform_get_irq(), it only returns non-zero IRQ number and negative error number, other than zero. Fix this by removing the if condition. Signed-off-by:
Cheng Ziqiu <chengziqiu@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230314070130.60581-1-chengziqiu@hust.edu.cnSigned-off-by:
-
Kasumov Ruslan authored
The left side of the loop condition never becomes false. hwchan cannot be NULL, because it points to elements of the hw_channels array that takes one of 4 predefined values: pm8018_xoadc_channels, pm8038_xoadc_channels, pm8058_xoadc_channels, pm8921_xoadc_channels. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Reviewed-by:
Kasumov Ruslan <s02210418@gse.cs.msu.ru> Link: https://lore.kernel.org/r/20230315135114.22684-1-xhxgldhlpfy@gmail.comSigned-off-by:
-
- 12 Mar, 2023 10 commits
-
-
Tom Rix authored
smatch reports several warnings drivers/iio/adc/stm32-adc.c:2591:20: warning: symbol 'stm32_adc_min_ts_h7' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2610:20: warning: symbol 'stm32_adc_min_ts_mp1' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2630:20: warning: symbol 'stm32_adc_min_ts_mp13' was not declared. Should it be static? These variables are only used in stm32-adc.c, so they should be static Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230312161733.470617-1-trix@redhat.comSigned-off-by:
-
Krzysztof Kozlowski authored
Always reference acpi_device_id and of_device_id tables, as they is little benefit of conditional compiling and OF table could be used also for ACPI matching via PRP0001. This fixes warning: drivers/iio/proximity/sx9500.c:1039:34: error: ‘sx9500_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver currently matches only via i2c_device_id, but also has of_device_id table: drivers/iio/light/max44009.c:545:34: error: ‘max44009_of_match’ defined but not used [-Werror=unused-const-variable=] Fixes: 6aef699a ("iio: light: add driver for MAX44009") Signed-off-by:
-
Lorenzo Bianconi authored
Add device bindings for asm330lhb IMU sensor. Use asm330lhh as fallback device for asm330lhb since it implements all the features currently supported by asm330lhb. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
-
Lorenzo Bianconi authored
Add support to STM ASM330LHB (acc + gyro) automotive Mems sensor. The ASM330LHB sensor can use ASM330LHH as fallback device since it implements all the ASM330LHB features currently implemented in st_lsm6dsx. Datasheet: https://www.st.com/resource/en/datasheet/asm330lhb.pdfSigned-off-by:
-
Rasmus Villemoes authored
Currently, the driver handles CH_FUNC_CURRENT_INPUT_LOOP_POWER and CH_FUNC_CURRENT_INPUT_EXT_POWER completely identically. But that's not correct. In order for CH_FUNC_CURRENT_INPUT_LOOP_POWER to work, two changes must be made: (1) expose access to the DAC_CODE_x register so that the intended output current can be set, i.e. expose the channel as both current output and current input, and (2) per the data sheet When selecting the current input loop powered function, tie the VIOUTN_x pin to ground via the on-chip 200 kΩ resistor by enabling the CH_200K_TO_GND bit in the ADC_CONFIGx registers. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20230301115511.849418-1-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Use the value specified in the channel configuration node to populate the DIN_SINK field of the DIN_CONFIGx register. Signed-off-by:
-
Rasmus Villemoes authored
Depending on the actual hardware wired up to a digital input channel, it may be necessary to configure the ad74413r to sink a small current. For example, in the case of a simple mechanical switch, the charge on the external 68 nF capacitor (cf. the data sheet's Figure 34) will keep the channel as reading high even after the switch is turned off again. Signed-off-by:
-
Mike Looijmans authored
The ADS1100 is a 16-bit ADC (at 8 samples per second). The ADS1000 is similar, but has a fixed data rate. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by:
-
Mike Looijmans authored
The ADS1100 is a 16-bit ADC (at 8 samples per second). The ADS1000 is similar, but has a fixed data rate. Signed-off-by:
-
- 11 Mar, 2023 12 commits
-
-
William Breathitt Gray authored
This driver supports the CIO-DAC08 device and not "CIO-DAC06". Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/iio/adc/rcar-gyroadc.c:286:34: error: ‘rcar_gyroadc_child_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Marco Felsch authored
Align the code correctly if possible and align the channel bit mask to make it easier to read. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-6-m.felsch@pengutronix.deSigned-off-by:
-
Marco Felsch authored
The TMP116 is the predecessor of the TMP117. The TMP116 don't support custom offset calibration data, instead this register is used as generic EEPROM storage as well. Signed-off-by:
-
Marco Felsch authored
The TMP116 is the predecessor of the TMP117. Signed-off-by:
-
Marco Felsch authored
Don't error if the device-id found don't match the device-id for the TMP117 sensor since other TMPxxx might be compatible to the TMP117. The fallback mechanism tries to gather the required information from the of_device_id or from the i2c_client information. The commit also prepares the driver for adding new devices more easily by making use of switch-case at the relevant parts. Signed-off-by:
-
Marco Felsch authored
Fix the broken link to point to the correct homepage. Fixes: 5e713b25 ("dt-bindings: iio: temperature: Add DT bindings for TMP117") Signed-off-by:
-
Mehdi Djait authored
Rename the function to iio_trigger_poll_nested. Add kernel-doc with a note on the context where the function is expected to be called. Signed-off-by:
Mehdi Djait <mehdi.djait.k@gmail.com> Link: https://lore.kernel.org/r/841b533cba28ca25a8e87280c44e45979166e8e2.1677761379.git.mehdi.djait.k@gmail.comSigned-off-by:
-
Mehdi Djait authored
Move the kernel-doc of the function to industrialio-trigger.c Add a note on the context where the function is expected to be called. Signed-off-by:
-
Lorenzo Bianconi authored
During digital filters settling time the driver is expected to drop samples since they can be corrupted. Introduce the capability to drop a given number of samples according to the configured ODR. Add sample_to_discard for LSM6DSM-like sensors since new generation devices (e.g. LSM6DSO) support DRDY mask where corrupted samples are masked in hw with values greather than 0x7ffd so the driver can easily discard them. I have not added sample_to_discard support for LSM6DS3 or LSM6DS3H since I do not have any sample for testing at the moment. Reported-by:
Philippe De Muyter <phdm@macqel.be> Tested-by:
-
Angel Iglesias authored
The pressure sensor BMP580 contains a non-volatile memory that stores trimming and configuration params. That memory provides an programmable user range of three 2-byte words. Signed-off-by:
Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/f3f453d9b2c0f7820ca9c56e24e2165b6c39bb67.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by:
-
Angel Iglesias authored
Add bosch,bmp580 to compatible string for the new family of sensors. This family includes the BMP580 and BMP581 sensors. The register map in this family presents significant departures from previous generations. Signed-off-by:
-
