- 21 Oct, 2019 40 commits
-
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 58ecf131 upstream. The driver was using its struct usb_interface pointer as an inverted disconnected flag, but was setting it to NULL before making sure all completion handlers had run. This could lead to a NULL-pointer dereference in a number of dev_dbg, dev_warn and dev_err statements in the completion handlers which relies on said pointer. Fix this by unconditionally stopping all I/O and preventing resubmissions by poisoning the interrupt URBs at disconnect and using a dedicated disconnected flag. This also makes sure that all I/O has completed by the time the disconnect callback returns. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-4-johan@kernel.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 93ddb1f5 upstream. The driver was accessing its struct usb_interface in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: 66e3e591 ("usb: Add driver for Altus Metrum ChaosKey device (v2)") Cc: stable <stable@vger.kernel.org> # 4.1 Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 9a315358 upstream. Since commit c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Fixes: c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit b5f8d468 upstream. Make sure to stop also the asynchronous write URBs on disconnect() to avoid use-after-free in the completion handler after driver unbind. Fixes: 946b960d ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21: 51a2f077 ("USB: introduce usb_anchor") Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 80cd5479 upstream. The driver was accessing its struct usb_interface from its release() callback without holding a reference. This would lead to a use-after-free whenever debugging was enabled and the device was disconnected while its character device was open. Fixes: 549e8350 ("USB: iowarrior: Convert local dbg macro to dev_dbg") Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit edc4746f upstream. A recent fix addressing a deadlock on disconnect introduced a new bug by moving the present flag out of the critical section protected by the driver-data mutex. This could lead to a racing release() freeing the driver data before disconnect() is done with it. Due to insufficient locking a related use-after-free could be triggered also before the above mentioned commit. Specifically, the driver needs to hold the driver-data mutex also while checking the opened flag at disconnect(). Fixes: c468a8aa ("usb: iowarrior: fix deadlock on disconnect") Fixes: 946b960d ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Reported-by: syzbot+0761012cebf7bdb38137@syzkaller.appspotmail.com Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 123a0f12 upstream. The driver was accessing its struct usb_device in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: 66d4bc30 ("USB: adutux: remove custom debug macro") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit b2fa7bae upstream. The driver was using its struct usb_device pointer as an inverted disconnected flag, but was setting it to NULL before making sure all completion handlers had run. This could lead to a NULL-pointer dereference in a number of dev_dbg statements in the completion handlers which relies on said pointer. The pointer was also dereferenced unconditionally in a dev_dbg statement release() something which would lead to a NULL-deref whenever a device was disconnected before the final character-device close if debugging was enabled. Fix this by unconditionally stopping all I/O and preventing resubmissions by poisoning the interrupt URBs at disconnect and using a dedicated disconnected flag. This also makes sure that all I/O has completed by the time the disconnect callback returns. Fixes: 1ef37c60 ("USB: adutux: remove custom debug macro and module parameter") Fixes: 66d4bc30 ("USB: adutux: remove custom debug macro") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 44efc269 upstream. The driver was clearing its struct usb_device pointer, which it used as an inverted disconnected flag, before deregistering the character device and without serialising against racing release(). This could lead to a use-after-free if a racing release() callback observes the cleared pointer and frees the driver data before disconnect() is finished with it. This could also lead to NULL-pointer dereferences in a racing open(). Fixes: f08812d5 ("USB: FIx locks and urb->status in adutux (updated)") Cc: stable <stable@vger.kernel.org> # 2.6.24 Reported-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com Tested-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 8444efc4 upstream. Variable minor is being assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/usb/misc/adutux.c:770:2: warning: Value stored to 'minor' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit ac343366 upstream. After commit f7fac17c ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend. Although the algorithms are essentially the same, the old max timeout is (usec + usec * time of doing readl()), and the new max timeout is just usec, which is much less than the old one. Increase the timeout to make ASMedia xHCI able to suspend again. BugLink: https://bugs.launchpad.net/bugs/1844021 Fixes: f7fac17c ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.comSigned-off-by:
-
Rick Tseng authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit a70bcbc3 upstream. NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold. Thus we need to wait for CNR bit to clear in xhci resume, just as in xhci init. [Minor changes to comment and commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by:
Rick Tseng <rtseng@nvidia.com> Signed-off-by:
-
Jan Schmidt authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit d500c63f upstream. If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep checking further endpoints, as there might be periodic endpoints later that return USB3_LPM_DISABLED due to shorter service intervals. Without this, the code can set too high a maximum-exit-latency and prevent the use of multiple USB3 cameras that should be able to work. Cc: <stable@vger.kernel.org> Signed-off-by:
Jan Schmidt <jan@centricular.com> Tested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit cd9d9491 upstream. If host/hub initiated link pm is prevented by a driver flag we still must ensure that periodic endpoints have longer service intervals than link pm exit latency before allowing device initiated link pm. Fix this by continue walking and checking endpoint service interval if xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED While at it fix the split line error message Tested-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit bed5ef23 upstream. The driver was using its struct usb_interface pointer as an inverted disconnected flag and was setting it to NULL before making sure all completion handlers had run. This could lead to NULL-pointer dereferences in the dev_err() statements in the completion handlers which relies on said pointer. Fix this by using a dedicated disconnected flag. Note that this is also addresses a NULL-pointer dereference at release() and a struct usb_interface reference leak introduced by a recent runtime PM fix, which depends on and should have been submitted together with this patch. Fixes: 4212cd74 ("USB: usb-skeleton.c: remove err() usage") Fixes: 5c290a5e ("USB: usb-skeleton: fix runtime PM after driver unbind") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 5c290a5e upstream. Since commit c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Fixes: c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit aafb00a9 upstream. The driver was using its struct usb_interface pointer as an inverted disconnected flag, but was setting it to NULL without making sure all code paths that used it were done with it. Before commit ef61eb43 ("USB: yurex: Fix protection fault after device removal") this included the interrupt-in completion handler, but there are further accesses in dev_err and dev_dbg statements in yurex_write() and the driver-data destructor (sic!). Fix this by unconditionally stopping also the control URB at disconnect and by using a dedicated disconnected flag. Note that we need to take a reference to the struct usb_interface to avoid a use-after-free in the destructor whenever the device was disconnected while the character device was still open. Fixes: aadd6472 ("USB: yurex.c: remove dbg() usage") Fixes: 45714104 ("USB: yurex.c: remove err() usage") Cc: stable <stable@vger.kernel.org> # 3.5: ef61eb43Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 32a0721c upstream. According to Greg KH, it has been generally agreed that when a USB driver encounters an unknown error (or one it can't handle directly), it should just give up instead of going into a potentially infinite retry loop. The three codes -EPROTO, -EILSEQ, and -ETIME fall into this category. They can be caused by bus errors such as packet loss or corruption, attempting to communicate with a disconnected device, or by malicious firmware. Nowadays the extent of packet loss or corruption is negligible, so it should be safe for a driver to give up whenever one of these errors occurs. Although the yurex driver handles -EILSEQ errors in this way, it doesn't do the same for -EPROTO (as discovered by the syzbot fuzzer) or other unrecognized errors. This patch adjusts the driver so that it doesn't log an error message for -EPROTO or -ETIME, and it doesn't retry after any errors. Reported-and-tested-by: syzbot+b24d736f18a1541ad550@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1909171245410.1590-100000@iolanthe.rowland.orgSigned-off-by:
-
Bastien Nocera authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 015664d1 upstream. The Rio500 kernel driver has not been used by Rio500 owners since 2001 not long after the rio500 project added support for a user-space USB stack through the very first versions of usbdevfs and then libusb. Support for the kernel driver was removed from the upstream utilities in 2008: https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db Cc: Cesar Miquel <miquel@df.uba.ar> Signed-off-by:
Bastien Nocera <hadess@hadess.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.netSigned-off-by:
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1848780 This driver was removed in Ubuntu commit 74fb80c7f1b7 ("USB: rio500: Remove Rio 500 kernel driver"). Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 20bb759a upstream. Calling 'panic()' on a kernel with CONFIG_PREEMPT=y can leave the calling CPU in an infinite loop, but with interrupts and preemption enabled. From this state, userspace can continue to be scheduled, despite the system being "dead" as far as the kernel is concerned. This is easily reproducible on arm64 when booting with "nosmp" on the command line; a couple of shell scripts print out a periodic "Ping" message whilst another triggers a crash by writing to /proc/sysrq-trigger: | sysrq: Trigger a crash | Kernel panic - not syncing: sysrq triggered crash | CPU: 0 PID: 1 Comm: init Not tainted 5.2.15 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x148 | show_stack+0x14/0x20 | dump_stack+0xa0/0xc4 | panic+0x140/0x32c | sysrq_handle_reboot+0x0/0x20 | __handle_sysrq+0x124/0x190 | write_sysrq_trigger+0x64/0x88 | proc_reg_write+0x60/0xa8 | __vfs_write+0x18/0x40 | vfs_write+0xa4/0x1b8 | ksys_write+0x64/0xf0 | __arm64_sys_write+0x14/0x20 | el0_svc_common.constprop.0+0xb0/0x168 | el0_svc_handler+0x28/0x78 | el0_svc+0x8/0xc | Kernel Offset: disabled | CPU features: 0x0002,24002004 | Memory Limit: none | ---[ end Kernel panic - not syncing: sysrq triggered crash ]--- | Ping 2! | Ping 1! | Ping 1! | Ping 2! The issue can also be triggered on x86 kernels if CONFIG_SMP=n, otherwise local interrupts are disabled in 'smp_send_stop()'. Disable preemption in 'panic()' before re-enabling interrupts. Link: http://lkml.kernel.org/r/20191002123538.22609-1-will@kernel.org Link: https://lore.kernel.org/r/BX1W47JXPMR8.58IYW53H6M5N@dragonstoneSigned-off-by:
Will Deacon <will@kernel.org> Reported-by:
Xogium <contact@xogium.me> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Feng Tang <feng.tang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Oleksandr Suvorov authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit b1f373a1 ] VAG power control is improved to fit the manual [1]. This patch fixes as minimum one bug: if customer muxes Headphone to Line-In right after boot, the VAG power remains off that leads to poor sound quality from line-in. I.e. after boot: - Connect sound source to Line-In jack; - Connect headphone to HP jack; - Run following commands: $ amixer set 'Headphone' 80% $ amixer set 'Headphone Mux' LINE_IN Change VAG power on/off control according to the following algorithm: - turn VAG power ON on the 1st incoming event. - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In). - turn VAG power OFF when there is the latest consumer's pre-down event come. - always delay after VAG power OFF to avoid pop. - delay after VAG power ON if the initiative consumer is Line-In, this prevents pop during line-in muxing. According to the data sheet [1], to avoid any pops/clicks, the outputs should be muted during input/output routing changes. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Cc: stable@vger.kernel.org Fixes: 9b34e6cc ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by:
Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit f88eb7c0 upstream. We currently don't validate the beacon head, i.e. the header, fixed part and elements that are to go in front of the TIM element. This means that the variable elements there can be malformed, e.g. have a length exceeding the buffer size, but most downstream code from this assumes that this has already been checked. Add the necessary checks to the netlink policy. Cc: stable@vger.kernel.org Fixes: ed1b6cc7 ("cfg80211/nl80211: add beacon settings") Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jouni Malinen authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 7388afe0 upstream. Enforce the first argument to be a correct type of a pointer to struct element and avoid unnecessary typecasts from const to non-const pointers (the change in validate_ie_attr() is needed to make this part work). In addition, avoid signed/unsigned comparison within for_each_element() and mark struct element packed just in case. Signed-off-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 0f3b07f0 upstream. Rather than always iterating elements from frames with pure u8 pointers, add a type "struct element" that encapsulates the id/datalen/data format of them. Then, add the element iteration macros * for_each_element * for_each_element_id * for_each_element_extid which take, as their first 'argument', such a structure and iterate through a given u8 array interpreting it as elements. While at it and since we'll need it, also add * for_each_subelement * for_each_subelement_id * for_each_subelement_extid which instead of taking data/length just take an outer element and use its data/datalen. Also add for_each_element_completed() to determine if any of the loops above completed, i.e. it was able to parse all of the elements successfully and no data remained. Use for_each_element_id() in cfg80211_find_ie_match() as the first user of this. Signed-off-by:
-
Horia Geantă authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 48f89d2a upstream. IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed to be scheduled before the data transfer from ofifo to external memory (set up at [38]: [29] 10FA0004 ld: ind-nfifo (len=4) imm [30] 81F00010 <nfifo_entry: ofifo->class2 type=msg len=16> [31] 14820004 ld: ccb2-datasz len=4 offs=0 imm [32] 00000010 data:0x00000010 [33] 8210010D operation: cls1-op aes cbc init-final enc [34] A8080B04 math: (seqin + math0)->vseqout len=4 [35] 28000010 seqfifold: skip len=16 [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [38] 69300000 seqfifostr: msg len=vseqoutsz [39] 5C20000C seqstr: ccb2 ctx len=12 offs=0 If ofifo -> external memory transfer happens first, DECO will hang (issuing a Watchdog Timeout error, if WDOG is enabled) waiting for data availability in ofifo for the ofifo -> c2 ififo transfer. Make sure IV transfer happens first by waiting for all CAAM internal transfers to end before starting payload transfer. New descriptor with jump command inserted at [37]: [..] [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] A1000401 jump: jsl1 all-match[!nfifopend] offset=[01] local->[38] [38] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [39] 69300000 seqfifostr: msg len=vseqoutsz [40] 5C20000C seqstr: ccb2 ctx len=12 offs=0 [Note: the issue is present in the descriptor from the very beginning (cf. Fixes tag). However I've marked it v4.19+ since it's the oldest maintained kernel that the patch applies clean against.] Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 1acebad3 ("crypto: caam - faster aead implementation") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> [Horia: backport to v4.4, v4.9] Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Srikar Dronamraju authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit 443f2d5b ] Observe a segmentation fault when 'perf stat' is asked to repeat forever with the interval option. Without fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.000211692 3,13,89,82,34,157 cycles 10.000380119 1,53,98,52,22,294 cycles 10.040467280 17,16,79,265 cycles Segmentation fault This problem was only observed when we use forever option aka -r 0 and works with limited repeats. Calling print_counter with ts being set to NULL, is not a correct option when interval is set. Hence avoid print_counter(NULL,..) if interval is set. With fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.019866622 3,15,14,43,08,697 cycles 10.039865756 3,15,16,31,95,261 cycles 10.059950628 1,26,05,47,158 cycles 5.009902655 3,14,52,62,33,932 cycles 10.019880228 3,14,52,22,89,154 cycles 10.030543876 66,90,18,333 cycles 5.009848281 3,14,51,98,25,437 cycles 10.029854402 3,15,14,93,04,918 cycles 5.009834177 3,14,51,95,92,316 cycles Committer notes: Did the 'git bisect' to find the cset introducing the problem to add the Fixes tag below, and at that time the problem reproduced as: (gdb) run stat -r0 -I500 sleep 1 <SNIP> Program received signal SIGSEGV, Segmentation fault. print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep); (gdb) bt #0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 #1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938 #2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411 #3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370 #4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429 #5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473 #6 0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588 (gdb) Mostly the same as just before this patch: Program received signal SIGSEGV, Segmentation fault. 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep); (gdb) bt #0 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 #1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670) at util/stat-display.c:1172 #2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656 #3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960 #4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310 #5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362 #6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406 #7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531 (gdb) Fixes: d4f63a47 ("perf stat: Introduce print_counters function") Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.2+ Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.comSigned-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit e0d2615856b2046c2e8d5bfd6933f37f69703b0b ] If the re-allocation of tep->cmdlines succeeds, then the previous allocation of tep->cmdlines will be freed. If we later fail in add_new_comm(), we must not free cmdlines, and also should assign tep->cmdlines to the new allocation. Otherwise when freeing tep, the tep->cmdlines will be pointing to garbage. Fixes: a6d2a61a ("tools lib traceevent: Remove some die() calls") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.orgSigned-off-by:
-
Valdis Kletnieks authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit 0f749140 ] When building with W=1, gcc properly complains that there's no prototypes: CC kernel/elfcore.o kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes] 7 | Elf_Half __weak elf_core_extra_phdrs(void) | ^~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes] 12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes] 17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm) | ^~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes] 22 | size_t __weak elf_core_extra_data_size(void) | ^~~~~~~~~~~~~~~~~~~~~~~~ Provide the include file so gcc is happy, and we don't have potential code drift Link: http://lkml.kernel.org/r/29875.1565224705@turing-policeSigned-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
zhengbin authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit 9ad09b19 ] If cuse_send_init fails, need to fuse_conn_put cc->fc. cuse_channel_open->fuse_conn_init->refcount_set(&fc->count, 1) ->fuse_dev_alloc->fuse_conn_get ->fuse_dev_free->fuse_conn_put Fixes: cc080e9e ("fuse: introduce per-instance fuse_dev structure") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Ido Schimmel authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit 1851799e ] thermal_zone_device_unregister() cancels the delayed work that polls the thermal zone, but it does not wait for it to finish. This is racy with respect to the freeing of the thermal zone device, which can result in a use-after-free [1]. Fix this by waiting for the delayed work to finish before freeing the thermal zone device. Note that thermal_zone_device_set_polling() is never invoked from an atomic context, so it is safe to call cancel_delayed_work_sync() that can block. [1] [ +0.002221] ================================================================== [ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0 [ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17 [ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701 [ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check [ +0.000012] Call Trace: [ +0.000021] dump_stack+0xa9/0x10e [ +0.000020] print_address_description.cold.2+0x9/0x25e [ +0.000018] __kasan_report.cold.3+0x78/0x9d [ +0.000016] kasan_report+0xe/0x20 [ +0.000016] __mutex_lock+0x1076/0x11c0 [ +0.000014] step_wise_throttle+0x72/0x150 [ +0.000018] handle_thermal_trip+0x167/0x760 [ +0.000019] thermal_zone_device_update+0x19e/0x5f0 [ +0.000019] process_one_work+0x969/0x16f0 [ +0.000017] worker_thread+0x91/0xc40 [ +0.000014] kthread+0x33d/0x400 [ +0.000015] ret_from_fork+0x3a/0x50 [ +0.000020] Allocated by task 1: [ +0.000015] save_stack+0x19/0x80 [ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0 [ +0.000014] kmem_cache_alloc_trace+0x152/0x320 [ +0.000015] thermal_zone_device_register+0x1b4/0x13a0 [ +0.000015] mlxsw_thermal_init+0xc92/0x23d0 [ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0 [ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90 [ +0.000013] mlxsw_pci_probe+0x355/0x4b0 [ +0.000014] local_pci_probe+0xc3/0x150 [ +0.000013] pci_device_probe+0x280/0x410 [ +0.000013] really_probe+0x26a/0xbb0 [ +0.000013] driver_probe_device+0x208/0x2e0 [ +0.000013] device_driver_attach+0xfe/0x140 [ +0.000013] __driver_attach+0x110/0x310 [ +0.000013] bus_for_each_dev+0x14b/0x1d0 [ +0.000013] driver_register+0x1c0/0x400 [ +0.000015] mlxsw_sp_module_init+0x5d/0xd3 [ +0.000014] do_one_initcall+0x239/0x4dd [ +0.000013] kernel_init_freeable+0x42b/0x4e8 [ +0.000012] kernel_init+0x11/0x18b [ +0.000013] ret_from_fork+0x3a/0x50 [ +0.000015] Freed by task 581: [ +0.000013] save_stack+0x19/0x80 [ +0.000014] __kasan_slab_free+0x125/0x170 [ +0.000013] kfree+0xf3/0x310 [ +0.000013] thermal_release+0xc7/0xf0 [ +0.000014] device_release+0x77/0x200 [ +0.000014] kobject_put+0x1a8/0x4c0 [ +0.000014] device_unregister+0x38/0xc0 [ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0 [ +0.000014] mlxsw_thermal_fini+0x184/0x35a [ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640 [ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210 [ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0 [ +0.000014] genl_family_rcv_msg+0x700/0xee0 [ +0.000013] genl_rcv_msg+0xca/0x170 [ +0.000013] netlink_rcv_skb+0x137/0x3a0 [ +0.000012] genl_rcv+0x29/0x40 [ +0.000013] netlink_unicast+0x49b/0x660 [ +0.000013] netlink_sendmsg+0x755/0xc90 [ +0.000013] __sys_sendto+0x3de/0x430 [ +0.000013] __x64_sys_sendto+0xe2/0x1b0 [ +0.000013] do_syscall_64+0xa4/0x4d0 [ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ +0.000017] The buggy address belongs to the object at ffff8881e48e0008 which belongs to the cache kmalloc-2k of size 2048 [ +0.000012] The buggy address is located 1096 bytes inside of 2048-byte region [ffff8881e48e0008, ffff8881e48e0808) [ +0.000007] The buggy address belongs to the page: [ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0 [ +0.000020] flags: 0x200000000010200(slab|head) [ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0 [ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ +0.000007] page dumped because: kasan: bad access detected [ +0.000012] Memory state around the buggy address: [ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000008] ^ [ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000007] ================================================================== Fixes: b1569e99 ("ACPI: move thermal trip handling to generic thermal layer") Reported-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Trek authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit 73d8e6c7 ] Do not try to allocate any amount of memory requested by the user. Instead limit it to 128 registers. Actually the longest series of consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and mmGB_MACROTILE_MODE0-15 (0x2644-0x2673). Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273Signed-off-by:
Trek <trek00@inbox.ru> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Luis Henriques authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit 75067034 ] When filling an inode with info from the MDS, i_blkbits is being initialized using fl_stripe_unit, which contains the stripe unit in bytes. Unfortunately, this doesn't make sense for directories as they have fl_stripe_unit set to '0'. This means that i_blkbits will be set to 0xff, causing an UBSAN undefined behaviour in i_blocksize(): UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12 shift exponent 255 is too large for 32-bit type 'int' Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit is zero. Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Igor Druzhinin authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit a4098bc6 ] If MCFG area is not reserved in E820, Xen by default will defer its usage until Dom0 registers it explicitly after ACPI parser recognizes it as a reserved resource in DSDT. Having it reserved in E820 is not mandatory according to "PCI Firmware Specification, rev 3.2" (par. 4.1.2) and firmware is free to keep a hole in E820 in that place. Xen doesn't know what exactly is inside this hole since it lacks full ACPI view of the platform therefore it's potentially harmful to access MCFG region without additional checks as some machines are known to provide inconsistent information on the size of the region. Now xen_mcfg_late() runs after acpi_init() which is too late as some basic PCI enumeration starts exactly there as well. Trying to register a device prior to MCFG reservation causes multiple problems with PCIe extended capability initializations in Xen (e.g. SR-IOV VF BAR sizing). There are no convenient hooks for us to subscribe to so register MCFG areas earlier upon the first invocation of xen_add_device(). It should be safe to do once since all the boot time buses must have their MCFG areas in MCFG table already and we don't support PCI bus hot-plug. Signed-off-by:
Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Chengguang Xu authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit c87a37eb ] Currently on mmap cache policy, we always attach writeback_fid whether mmap type is SHARED or PRIVATE. However, in the use case of kata-container which combines 9p(Guest OS) with overlayfs(Host OS), this behavior will trigger overlayfs' copy-up when excute command inside container. Link: http://lkml.kernel.org/r/20190820100325.10313-1-cgxu519@zoho.com.cnSigned-off-by:
Chengguang Xu <cgxu519@zoho.com.cn> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit e2751463 ] In encode_attrs(), there is an if statement on line 1145 to check whether label is NULL: if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL)) When label is NULL, it is used on lines 1178-1181: *p++ = cpu_to_be32(label->lfs); *p++ = cpu_to_be32(label->pi); *p++ = cpu_to_be32(label->len); p = xdr_encode_opaque_fixed(p, label->label, label->len); To fix these bugs, label is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Sascha Hauer authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit f5e10401 ] integrity_kernel_read() returns the number of bytes read. If this is a short read then this positive value is returned from ima_calc_file_hash_atfm(). Currently this is only indirectly called from ima_calc_file_hash() and this function only tests for the return value being zero or nonzero and also doesn't forward the return value. Nevertheless there's no point in returning a positive value as an error, so translate a short read into -EINVAL. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit f43e5210 upstream. In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075c ("nl80211: Add support for EDMG channels") Reported-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 7fd25e6f upstream. The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008 ("ieee802154: add support for atusb transceiver") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Alexander Aring <alex.aring@gmail.com> Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Alexander Sverdlin authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 1b82feb6 upstream. It seems that smp_processor_id() is only used for a best-effort load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible to disable preemption for the duration of the crypto requests. Therefore, just silence the warning. This commit is similar to e7a9b05c ("crypto: cavium - Fix smp_processor_id() warnings"). Silences the following splat: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904 caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1 ... Call Trace: dump_stack+0x5f/0x86 check_preemption_disabled+0xd3/0xe0 qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] skcipher_setkey_ablkcipher+0x2b/0x40 __test_skcipher+0x1f3/0xb20 ? cpumask_next_and+0x26/0x40 ? find_busiest_group+0x10e/0x9d0 ? preempt_count_add+0x49/0xa0 ? try_module_get+0x61/0xf0 ? crypto_mod_get+0x15/0x30 ? __kmalloc+0x1df/0x1f0 ? __crypto_alloc_tfm+0x116/0x180 ? crypto_skcipher_init_tfm+0xa6/0x180 ? crypto_create_tfm+0x4b/0xf0 test_skcipher+0x21/0xa0 alg_test_skcipher+0x3f/0xa0 alg_test.part.6+0x126/0x2a0 ? finish_task_switch+0x21b/0x260 ? __schedule+0x1e9/0x800 ? __wake_up_common+0x8d/0x140 cryptomgr_test+0x40/0x50 kthread+0xff/0x130 ? cryptomgr_notify+0x540/0x540 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x24/0x50 Fixes: ed8ccaef ("crypto: qat - Add support for SRIOV") Cc: stable@vger.kernel.org Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
