Pull md fixes from Neil Brown:
 "Some md fixes for 4.2

  Several are tagged for -stable.
  A few aren't because they are not very, serious or because they are in
  the 'experimental' cluster code"

* tag 'md/4.2-fixes' of git://neil.brown.name/md:
  md/raid5: clear R5_NeedReplace when no longer needed.
  Fix read-balancing during node failure
  md-cluster: fix bitmap sub-offset in bitmap_read_sb
  md: Return error if request_module fails and returns positive value
  md: Skip cluster setup in case of error while reading bitmap
  md/raid1: fix test for 'was read error from last working device'.
  md: Skip cluster setup for dm-raid
  md: flush ->event_work before stopping array.
  md/raid10: always set reshape_safe when initializing reshape_position.
  md/raid5: avoid races when changing cache size.

Pull MTD fixes from Brian Norris:
 "Two trivial updates.  I meant to send these much earlier, but I've
  been preoccupied.

   - Add MAINTAINERS entry for diskonchip g3 driver

   - Fix an overlooked conflict in bitfield value assignments

  The latter update is a bit overdue, but there's no reason to wait any
  longer"

* tag 'for-linus-20150724' of git://git.infradead.org/linux-mtd:
  mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict
  MAINTAINERS: mtd: docg3: add docg3 maintainer

Pull block fixes from Jens Axboe:
 "Four smaller fixes for the current series.  This contains:

   - A fix for clones of discard bio's, that can cause data corruption.
     From Martin.

   - A fix for null_blk, where in certain queue modes it could access a
     request after it had been freed.  From Mike Krinkin.

   - An error handling leak fix for blkcg, from Tejun.

   - Also from Tejun, export of the functions that a file system needs
     to implement cgroup writeback support"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Do a full clone when splitting discard bios
  block: export bio_associate_*() and wbc_account_io()
  blkcg: fix gendisk reference leak in blkg_conf_prep()
  null_blk: fix use-after-free problem

Pull libata fixes from Tejun Heo:
 "A couple important fixes.

   - A block layer change which removed restriction on max transfer size
     led to silent data corruption on some devices.  A new quirk is
     added to restore the old size limit for the reported device.  If it
     gets reported on more devices, we might have to consider restoring
     the restriction for ATA devices by default.

   - There finally is a SSD which is confirmed to cause data corruption
     on TRIM regardless of which flavor is used.  A new quirk is added
     and the device is blacklisted

   - Other device-specific workarounds"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Do not blacklist M510DC
  libata: increase the timeout when setting transfer mode
  libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  libata: force disable trim for SuperSSpeed S238
  libata: add ATA_HORKAGE_NOTRIM
  libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
  ata: pmp: add quirk for Marvell 4140 SATA PMP

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.2 rc4.

  Note, most of the changes are for the sdhci-esdhc-imx controller,
  which also required us to modify some related DTS files.  Those
  changes have been acked by the SoC maintainer.

  MMC core:
   - Fix a reference inbalance issue for power_ro_lock_show() sysfs handler

  MMC host:
   - omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC
   - sdhci: Prevent a kernel panic while using DMA
   - mtk-sd: Let it depend on HAS_DMA to prevent build errors
   - sdhci-esdhc: Make 8BIT bus work
   - sdhci-esdhc-imx: Fix some regressions for DT based platforms
   - sdhci-pxav3: Fix a regression for DT based platforms"

* tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci-pxav3: fix platform_data is not initialized
  dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support
  mmc: sdhci-esdhc-imx: clear f_max in boarddata
  mmc: sdhci-esdhc-imx: remove duplicated dts parsing
  mmc: sdhci: make max-frequency property in device tree work
  mmc: sdhci-esdhc-imx: move all non dt probe code into one function
  mmc: sdhci-esdhc-imx: fix cd regression for dt platform
  dts: imx7: fix sd card gpio polarity specified in device tree
  dts: imx25: fix sd card gpio polarity specified in device tree
  dts: imx6: fix sd card gpio polarity specified in device tree
  dts: imx53: fix sd card gpio polarity specified in device tree
  dts: imx51: fix sd card gpio polarity specified in device tree
  mmc: sdhci-esdhc: Make 8BIT bus work
  mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()
  mmc: MMC_MTK should depend on HAS_DMA
  mmc: sdhci check parameters before call dma_free_coherent
  mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts
  mmc: omap_hsmmc: Fix DTO and DCRC handling

Pull input fixes from Dmitry Torokhov:
 "A fix for the warnings/oops when handling HID devices with "unnamed"
  LEDs and couple of other driver fixups""

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix - fix touch coordinates on WinBook TW100 and TW700
  Input: LEDs - skip unnamed LEDs
  Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen
  Input: elantech - force resolution of 31 u/mm
  Input: zforce - don't overwrite the stack

Merge tag 'regulator-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "As well as some driver specific fixes there's several fixes here for
  the core support for regulators supplying other regulators fixing both
  an issue with ACPI support (which had never been tested before) and
  some error handling and device removal issues that Javier noticed"

* tag 'regulator-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Fix memory leak in regulator_resolve_supply()
  regulator: core: Increase refcount for regulator supply's module
  regulator: core: Handle full constraints systems when resolving supplies
  regulator: 88pm800: fix LDO vsel_mask value
  regulator: max8973: Fix up control flag option for bias control
  regulator: s2mps11: Fix GPIO suspend enable shift wrapping bug

Pull spi fixes from Mark Brown:
 "A small collection of pretty much unremarkable driver specific fixes
  here plus the addition of a new device ID to spidev which requires no
  other code changes"

* tag 'spi-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: imx: Fix small DMA transfers
  spi: zynq: missing break statement
  spi: SPI_ZYNQMP_GQSPI should depend on HAS_DMA
  spi: spidev: add compatible value for LTC2488
  spi: img-spfi: fix support for speeds up to 1/4th input clock

Pull sound fixes from Takashi Iwai:
 "This has been a calm week again: one minor lockdep fix for PCM core,
  and the most of the rest are HD-audio quirks and fixups for various
  chips and machines"

* tag 'sound-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add headset mic pin quirk for a Dell device
  ALSA: hda - remove one pin from ALC292_STANDARD_PINS
  ALSA: hda - Add new GPU codec ID 0x10de007d to snd-hda
  ALSA: hda: add new AMD PCI IDs with proper driver caps
  ALSA: hda - Fix Skylake codec timeout
  ALSA: hda - Add headset mic support for Acer Aspire V5-573G
  ALSA: sparc: Add missing kfree in error path
  ALSA: pcm: Fix lockdep warning with nonatomic PCM ops

Pull HID fixes from Jiri Kosina:

 - kernel crash fixes for multitouch and wacom drivers, by Brent Adam
   and Dan Carpenter

 - cp2112 data packet race condition corruption fix, by Antonio Borneo

 - a few new device IDs for wacom and microsoft drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: cp2112: fix to force single data-report reply
  HID: wacom: Enable pad device for older Bamboo Touch tablets
  HID: multitouch: Fix fields from pen report ID being interpreted for multitouch
  HID: microsoft: Add quirk for MS Surface Type/Touch cover
  HID: wacom: NULL dereferences on error in probe()

Pull drm fixes from Dave Airlie:
 "Aome amdgpu, one i915, one ttm and one hlcdc, nothing too scary.

  All seems fine for about this time"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: recognize ARM64 arch in ioprot handler
  drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels
  drm/amdgpu/cz: implement voltage validation properly
  drm/amdgpu: add VCE harvesting instance query
  drm/amdgpu: implement VCE 3.0 harvesting support (v4)
  drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC
  drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC
  drm: Stop resetting connector state to unknown
  drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls
  drm: atmel-hlcdc: fix vblank initial state

Pull arch/tile bugfix from Chris Metcalf:
 "This fixes a bug in freeing the initramfs memory"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: use free_bootmem_late() for initrd

Pull KVM fixes from Paolo Bonzini:
 "Everything related to the new quirks and memory type features:

   - small improvements to the quirks API

   - extending one of the quirks from just AMD to Intel as well, because
     4.2 can show the same problem with problematic firmware on Intel
     too"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: rename quirk constants to KVM_X86_QUIRK_*
  KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED
  KVM: x86: introduce kvm_check_has_quirk
  KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type
  KVM: MTRR: fix memory type handling if MTRR is completely disabled

The touchscreen on the WinBook TW100 and TW700 don't match the default
display, with 0,0 touches being reported when touching at the bottom
right of the screen.

  1280,800             0,800
         +-------------+
         |             |
         |             |
         |             |
         +-------------+
    1280,0             0,0

It's unfortunately impossible to detect this problem with data from the
DSDT, or other auxiliary metadata, so fallback to quirking this specific
model of tablet instead.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Devices may declare more LEDs than what is known to input-leds
(HID does this for some devices). Instead of showing ugly warnings
on connect and, even worse, oopsing on disconnect, let's simply
ignore LEDs that are not known to us.
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge remote-tracking branches 'spi/fix/gqspi', 'spi/fix/imx', 'spi/fix/mg-spfi' and 'spi/fix/spidev' into spi-linus

Merge remote-tracking branches 'regulator/fix/88pm800', 'regulator/fix/max8973', 'regulator/fix/s2mps11' and 'regulator/fix/supply' into regulator-linus

DMA transfers must be greater than the watermark level size. spi_imx->rx_wml
and spi_imx->tx_wml contain the watermark level in 32bit words whereas struct
spi_transfer contains the transfer len in bytes. Fix the check if DMA is
possible for a transfer accordingly. This fixes transfers with sizes between
33 and 128 bytes for which previously was claimed that DMA is possible.

Fixes: f62caccd (spi: spi-imx: add DMA support)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

pdev->dev.platform_data is not initialized if match is true in function
sdhci_pxav3_probe. Just local variable pdata is assigned the return value
from function pxav3_get_mmc_pdata().

static int sdhci_pxav3_probe(struct platform_device *pdev) {

    struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
    ...
    if (match) {
		ret = mmc_of_parse(host->mmc);
		if (ret)
			goto err_of_parse;
		sdhci_get_of_property(pdev);
		pdata = pxav3_get_mmc_pdata(dev);
     }
     ...
}
Signed-off-by: Jingju Hou <houjingj@marvell.com>
Fixes: b650352d("mmc: sdhci-pxa: Add device tree support")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

It's not supported by driver anymore after using runtime pm
and there's no user of it, so delete it now.
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

After commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"),
it's not used anymore.
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

After commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"),
we do not need those duplicated parsing anymore.

Note: fsl,cd-controller is also deleted due to the driver does
not support controller card detection anymore after switch to runtime pm.
And there's no user of it right now in device tree.

wp-gpios is kept because we're still support fsl,wp-controller,
so we need a way to check if it's gpio wp or controller wp.
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Device tree provides option to specify the max freqency with property
"max-frequency" in dts and common parse function mmc_of_parse() will
parse it and use this value to set host->f_max to tell the MMC core
the maxinum frequency the host works.

However, current sdhci driver will finally overwrite this value with
host->max_clk regardless of the max-frequency property.

This patch makes sure not overwrite the max-frequency set from device
tree and do basic sanity check.
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This is an incremental fix of commit
e62bd351b("mmc: sdhci-esdhc-imx: Do not break platform data boards").

After commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"),
we do not need to run the check of boarddata->wp_type/cd_type/max_bus_width
again for dt platform since those are already handled by mmc_of_parse().

Current code only exclude the checking of wp_type for dt platform which
does not make sense.

This patch moves all non dt probe code into one function.
Besides, since we only support SD3.0/eMMC HS200 for dt platform, the
support_vsel checking and ultra high speed pinctrl state are also merged
into sdhci_esdhc_imx_probe_dt.

Then we have two separately probe function for dt and non dt type.
This can make the driver probe more clearly.
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Current card detect probe process is that when driver finds a valid
ESDHC_CD_GPIO, it will clear the quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION
which is set by default for all esdhc/usdhc controllers.
Then host driver will know there's a valid card detect function.

Commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()")
breaks GPIO CD function for dt platform that it will return directly
when find ESDHC_CD_GPIO for dt platform which result in the later wrongly
to keep SDHCI_QUIRK_BROKEN_CARD_DETECTION for all dt platforms.
Then MMC_CAP_NEEDS_POLL will be used instead even there's a valid
GPIO card detect.

This patch adds back this function and follows the original approach to
clear the quirk if find an valid CD GPIO for dt platforms.

Fixes: 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()")
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Support for 8BIT bus with was added some time ago to sdhci-esdhc but
then missed to remove the 8BIT from the reserved bit mask which made
8BIT non functional.

Fixes: 66b50a00 ("mmc: esdhc: Add support for 8-bit bus width and..")
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Enclosing mmc_blk_put() is missing in power_ro_lock_show() sysfs handler,
let's add it.

Fixes: add710ea ("mmc: boot partition ro lock support")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

If NO_DMA=y:

    ERROR: "dma_alloc_coherent" [drivers/mmc/host/mtk-sd.ko] undefined!
    ERROR: "dma_unmap_sg" [drivers/mmc/host/mtk-sd.ko] undefined!
    ERROR: "dma_map_sg" [drivers/mmc/host/mtk-sd.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/mmc/host/mtk-sd.ko] undefined!

Add a dependency on HAS_DMA to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

We should not call dma_free_coherent if host->adma_table is NULL,
otherwise may trigger panic.

Fixes: d1e49f77 ("mmc: sdhci: convert ADMA descriptors to a...")
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Sometimes BADA, DEB or CEB error interrupts occur when sd card is
unplugged during data transfer. These interrupts are currently ignored
by the interrupt handler. But, this results in card not being
recognised on subsequent insertion. This is because mmcqd is waiting
forever for the data transfer(for which error occurred) to complete.
Fix this, by reporting BADA, DEB, CEB errors to mmc-core as -EILSEQ, so
that the core can do appropriate handling.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

DTO/DCRC errors were not being informed to the mmc core since
commit ae4bf788 ("mmc: omap_hsmmc: consolidate error report handling of
HSMMC IRQ"). This commit made sure 'end_trans' is never set on DTO/DCRC
errors. This is because after this commit 'host->data' is checked after
it has been cleared to NULL by omap_hsmmc_dma_cleanup().

Because 'end_trans' is never set, omap_hsmmc_xfer_done() is never invoked
making core layer not to be aware of DTO/DCRC errors. Because of this
any command invoked after DTO/DCRC error leads to a hang.

Fix this by checking for 'host->data' before it is actually cleared.

Fixes: ae4bf788 ("mmc: omap_hsmmc: consolidate error report handling of
HSMMC IRQ")

CC: stable@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge tag 'drm-atmel-hlcdc/fixes-for-4.2' of https://github.com/bbrezillon/linux-at91 into drm-fixes

single hlcdc fix.

* tag 'drm-atmel-hlcdc/fixes-for-4.2' of https://github.com/bbrezillon/linux-at91:
  drm: atmel-hlcdc: fix vblank initial state

This flag is currently never cleared, which can in rare cases
trigger a warn-on if it is still set but the block isn't
InSync.

So clear it when it isn't need, which includes if the replacement
device has failed.
Signed-off-by: NeilBrown <neilb@suse.com>

During a node failure, We need to suspend read balancing so that the
reads are directed to the first device and stale data is not read.
Suspending writes is not required because these would be recorded and
synced eventually.

A new flag MD_CLUSTER_SUSPEND_READ_BALANCING is set in recover_prep().
area_resyncing() will respond true for the entire devices if this
flag is set and the request type is READ. The flag is cleared
in recover_done().
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reported-By: David Teigland <teigland@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>