- 21 Nov, 2017 35 commits
-
-
Jarkko Nikula authored
[ Upstream commit 42f7f3c4 ] Add module alias for Sony ACX565AKM LCD panel. This makes it probe on Nokia N900 when panel driver is built as a module. Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
[ Upstream commit 874e1f6f ] The pseudo DMA transfer codes in VX222 and VX-pocket driver have a slight bug where they check the buffer boundary wrongly, and may overflow. Also, the zero sample count might be handled badly for the playback (although it shouldn't happen in theory). This patch addresses these issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit ed3c177d ] The update of stream costs significantly, and we should avoid it unless the stream really has started. Check pipe->running flag instead of pipe->prepared. Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 248efcf0 ] In order for the MSB -> LSB latching to work correctly we must read the 2 8 bit registers of a 12 bit value in one consecutive read. This fixes voltage_ocv reporting inconsistent values on my tablet. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 4949fc5e ] In order for the MSB -> LSB latching to work correctly we must read the 2 8 bit registers of a 15 bit value in one consecutive read. This fixes charge_full reporting 3498768 on some reads and 3354624 one other reads on my tablet (for the 3354624 value the raw LSB is 0x00). Signed-off-by:
-
Fabien Lahoudere authored
[ Upstream commit 666b5d1e ] Remove spinlock and use the "rtc->ops_lock" from RTC subsystem instead. spin_lock_irqsave() is not needed here because we do not have hard IRQs. This patch fixes the following issue: root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc [ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 [ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 [ 82.121329] CPU: 0 PID: 855 Comm: hwclock Not tainted 4.8.0-00042-g09d5410-dirty #20 [ 82.129078] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 82.135609] Backtrace: [ 82.138090] [<8010d378>] (dump_backtrace) from [<8010d5c0>] (show_stack+0x20/0x24) [ 82.145664] r7:ec936000 r6:600a0013 r5:00000000 r4:81031680 [ 82.151402] [<8010d5a0>] (show_stack) from [<80401518>] (dump_stack+0xb4/0xe8) [ 82.158636] [<80401464>] (dump_stack) from [<8017b8b0>] (spin_dump+0x84/0xcc) [ 82.165775] r10:00000000 r9:ec936000 r8:81056090 r7:600a0013 r6:edb4899c r5:edb4899c [ 82.173691] r4:e5033e00 r3:00000000 [ 82.177308] [<8017b82c>] (spin_dump) from [<8017bcb0>] (do_raw_spin_unlock+0x108/0x130) [ 82.185314] r5:edb4899c r4:edb4899c [ 82.188938] [<8017bba8>] (do_raw_spin_unlock) from [<8094b93c>] (_raw_spin_unlock_irqrestore+0x34/0x54) [ 82.198333] r5:edb4899c r4:600a0013 [ 82.201953] [<8094b908>] (_raw_spin_unlock_irqrestore) from [<8065b090>] (rx8010_set_time+0x14c/0x188) [ 82.211261] r5:00000020 r4:edb48990 [ 82.214882] [<8065af44>] (rx8010_set_time) from [<80653fe4>] (rtc_set_time+0x70/0x104) [ 82.222801] r7:00000051 r6:edb39da0 r5:edb39c00 r4:ec937e8c [ 82.228535] [<80653f74>] (rtc_set_time) from [<80655774>] (rtc_dev_ioctl+0x3c4/0x674) [ 82.236368] r7:00000051 r6:7ecf1b74 r5:00000000 r4:edb39c00 [ 82.242106] [<806553b0>] (rtc_dev_ioctl) from [<80284034>] (do_vfs_ioctl+0xa4/0xa6c) [ 82.249851] r8:00000003 r7:80284a40 r6:ed1e9c80 r5:edb44e60 r4:7ecf1b74 [ 82.256642] [<80283f90>] (do_vfs_ioctl) from [<80284a40>] (SyS_ioctl+0x44/0x6c) [ 82.263953] r10:00000000 r9:ec936000 r8:7ecf1b74 r7:4024700a r6:ed1e9c80 r5:00000003 [ 82.271869] r4:ed1e9c80 [ 82.274432] [<802849fc>] (SyS_ioctl) from [<80108520>] (ret_fast_syscall+0x0/0x1c) [ 82.282005] r9:ec936000 r8:801086c4 r7:00000036 r6:00000000 r5:00000003 r4:0008e1bc root@GE004097290448 b850v3:~# Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 hwclock --systohc root@GE004097290448 b850v3:~# Signed-off-by:
Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
James Smart authored
[ Upstream commit e0165f20 ] Clear the VendorVersion in the PLOGI/PLOGI ACC payload Vendor version info may have been set on fabric login. Before sending PLOGI payloads, ensure that it's cleared. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
James Smart authored
[ Upstream commit e6c6acc0 ] Correct issue leading to oops during link reset. Missing vport pointer. [mkp: fixed typo] Signed-off-by:
-
James Smart authored
[ Upstream commit 6c9231f6 ] Correct host name in symbolic_name field of nameserver registrations Signed-off-by:
-
James Smart authored
[ Upstream commit 104450eb ] FCoE VPort enable-disable does not bring up the VPort. VPI structure needed to be initialized before being re-registered. Signed-off-by:
-
James Smart authored
[ Upstream commit 6b3b3bdb ] On loosely ordered memory systems (PPC for example), the WQE elements were being updated in memory, but not necessarily flushed before the separate doorbell was written to hw which would cause hw to dma the WQE element. Thus, the hardware occasionally received partially updated WQE data. Add the memory barrier after updating the WQE memory. Signed-off-by:
-
Daniel Bristot de Oliveira authored
[ Upstream commit c4158ff5 ] This patch adds the __irq_entry annotation to the default x86 platform IRQ handlers. ftrace's function_graph tracer uses the __irq_entry annotation to notify the entry and return of IRQ handlers. For example, before the patch: 354549.667252 | 3) d..1 | default_idle_call() { 354549.667252 | 3) d..1 | arch_cpu_idle() { 354549.667253 | 3) d..1 | default_idle() { 354549.696886 | 3) d..1 | smp_trace_reschedule_interrupt() { 354549.696886 | 3) d..1 | irq_enter() { 354549.696886 | 3) d..1 | rcu_irq_enter() { After the patch: 366416.254476 | 3) d..1 | arch_cpu_idle() { 366416.254476 | 3) d..1 | default_idle() { 366416.261566 | 3) d..1 ==========> | 366416.261566 | 3) d..1 | smp_trace_reschedule_interrupt() { 366416.261566 | 3) d..1 | irq_enter() { 366416.261566 | 3) d..1 | rcu_irq_enter() { KASAN also uses this annotation. The smp_apic_timer_interrupt() was already annotated. Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Claudio Fontana <claudio.fontana@huawei.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolai Stange <nicstange@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/059fdf437c2f0c09b13c18c8fe4e69999d3ffe69.1483528431.git.bristot@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Galo Navarro authored
[ Upstream commit 401579c2 ] Several lifecycle events in the rtl8188eu driver are logged using the DBG_88E_LEVEL macro from rtw_debug.h, which is tagged as ERROR regardless of the actual level. Below are dmesg excerpts after loading and unloading the module, the messages are misleading as there was no error. [517434.916239] usbcore: registered new interface driver r8188eu [517435.680653] R8188EU: ERROR indicate disassoc [517437.122606] R8188EU: ERROR assoc success [517797.735611] usbcore: deregistering interface driver r8188eu [517797.736069] R8188EU: ERROR indicate disassoc Remove the ERROR prefix from the logs. After the patch, logs are: [517949.873976] usbcore: registered new interface driver r8188eu [517950.592845] R8188EU: indicate disassoc [517951.993973] R8188EU: assoc success [521778.784448] usbcore: deregistering interface driver r8188eu [521778.784838] R8188EU: indicate disassoc Signed-off-by:
Galo Navarro <anglorvaroa@gmail.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit ad02c4f5 ] For TCP sockets, TX timestamps are only captured when the user data is successfully and fully written to the socket. In many cases, however, TCP writes can be partial for which no timestamp is collected. Collect timestamps whenever any user data is (fully or partially) copied into the socket. Pass tcp_write_queue_tail to tcp_tx_timestamp instead of the local skb pointer since it can be set to NULL on the error path. Note that tcp_write_queue_tail can be NULL, even if bytes have been copied to the socket. This is because acknowledgements are being processed in tcp_sendmsg(), and by the time tcp_tx_timestamp is called tcp_write_queue_tail can be NULL. For such cases, this patch does not collect any timestamps (i.e., it is best-effort). This patch is written with suggestions from Willem de Bruijn and Eric Dumazet. Change-log V1 -> V2: - Use sockc.tsflags instead of sk->sk_tsflags. - Use the same code path for normal writes and errors. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
subhashj@codeaurora.org authored
[ Upstream commit 4e768e76 ] UFS device requires to perform bkops (back ground operations) periodically but host can control (via auto-bkops parameter of device) when device can perform bkops based on its performance requirements. In general, host would like to enable the device's auto-bkops only when it's not doing any regular data transfer but sometimes device may not behave properly if host keeps the auto-bkops disabled. This change adds the capability to let the device auto-bkops always enabled except suspend. Reviewed-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit ab3dabb3 ] If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias $ After this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias alias: of:N*T*Cqcom,ufshcC* alias: of:N*T*Cqcom,ufshc Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by:
-
Hannu Lounento authored
[ Upstream commit 76ed5a8f ] Fix an if statement with hw_dbg lines where the logic was inverted with regards to the corresponding return value used in the if statement. Signed-off-by:
Hannu Lounento <hannu.lounento@ge.com> Signed-off-by:
Peter Senna Tschudin <peter.senna@collabora.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Todd Fujinaka authored
[ Upstream commit 9474933c ] Similar to ixgbe, when an interface is part of a namespace it is possible that igb_close() may be called while __igb_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). Extend the rtnl_lock() to protect the call to netif_device_detach() and igb_clear_interrupt_scheme() in __igb_shutdown() and check for netif_device_present() to avoid calling igb_clear_interrupt_scheme() a second time in igb_close(). Also extend the rtnl lock in igb_resume() to netif_device_attach(). Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Aaron Sierra authored
[ Upstream commit 18278533 ] Several people have reported firmware leaving the I210/I211 PHY's page select register set to something other than the default of zero. This causes the first accesses, PHY_IDx register reads, to access something else, resulting in device probe failure: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 This problem began for them after a previous patch I submitted was applied: commit 2a3cdead Author: Aaron Sierra <asierra@xes-inc.com> Date: Tue Nov 3 12:37:09 2015 -0600 igb: Remove GS40G specific defines/functions I personally experienced this problem after attempting to PXE boot from I210 devices using this firmware: Intel(R) Boot Agent GE v1.5.78 Copyright (C) 1997-2014, Intel Corporation Resetting the PHY before reading from it, ensures the page select register is in its default state and doesn't make assumptions about the PHY's register set before the PHY has been probed. Cc: Matwey V. Kornilov <matwey@sai.msu.ru> Cc: Chris Arges <carges@vectranetworks.com> Cc: Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Tested-by:
Matwey V. Kornilov <matwey@sai.msu.ru> Tested-by:
Chris J Arges <christopherarges@gmail.com> Tested-by:
-
Arvind Yadav authored
[ Upstream commit 1ae0d5af ] Here, If devm_ioremap_nocache will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 62989ceb ] If NO_DMA=y: ERROR: "dma_pool_alloc" [drivers/ata/sata_mv.ko] undefined! ERROR: "dmam_pool_create" [drivers/ata/sata_mv.ko] undefined! ERROR: "dma_pool_free" [drivers/ata/sata_mv.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 2a736e05 ] If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/sata_highbank.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 7bc7ab1e ] If NO_DMA=y: ERROR: "dmam_alloc_coherent" [drivers/ata/libata.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit e13a22a4 ] Note that with 9730 the wiring is different compared to 9514 found on beagleboard xm for example. On beagleboard xm we have: /sys/bus/usb/devices/1-2 hub /sys/bus/usb/devices/1-2.1 9514 While on omap5-uevm we have: /sys/bus/usb/devices/1-2 hub /sys/bus/usb/devices/1-3 9730 Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit d97556c8 ] We need to also have OFFPULLUDENABLE bit set to use the off mode pull values. Otherwise the line is pulled down internally if no external pull exists. This is has some documentation at: http://processors.wiki.ti.com/index.php/Optimizing_OMAP35x_and_AM/DM37x_OFF_mode_PAD_configuration Note that the value is still glitchy during off mode transitions as documented in spz319f.pdf "Advisory 1.45". It's best to use external pulls instead of relying on the internal ones for off mode and even then anything pulled up will get driven down momentarily on off mode restore for GPIO banks other than bank1. Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 6e613ebf ] It's possible that there are multiple quirks that need to be initialized for the same SoC. Fix the issue by not returning on the first match. Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 1aa09df0 ] Without these changes children of the scn syscon won't probe. Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit f62280ef ] When using 8250_omap driver, we need to specify the right compatible value for the UART to work on dm814x and dm816x. Signed-off-by:
-
Ngai-Mint Kwan authored
[ Upstream commit 2f3fc1e6 ] Multiple IES API resets can cause a race condition where the mailbox interrupt request bits can be cleared before being handled. This can leave certain mailbox messages from the PF to be untreated and the PF will enter in some inactive state. If this situation occurs, the IES API will initiate a mailbox version reset which, then, trigger a mailbox state change. Once this mailbox transition occurs (from OPEN to CONNECT state), a request for reset will be returned. This ensures that PF will undergo a reset whenever IES API encounters an unknown global mailbox interrupt event or whenever the IES API terminates. Signed-off-by:
Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit 9fe172b9 ] extcon-palmas must be child of palmas and expects parent's drvdata to be valid. Check for non NULL parent drvdata and fail if it is NULL. Not doing so will result in a NULL pointer dereference later in the probe() parent drvdata is NULL (e.g. misplaced extcon-palmas node in device tree). Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Chanwoo Choi authored
[ Upstream commit 01b4c9a1 ] This patch removes the potential problem of extcon_register_notifier() when edev parameter is NULL. When edev is NULL, this function returns the first extcon device which includes the sepecific external connector of second paramter. But, it don't guarantee the same operation in all cases. To remove this confusion and potential problem, this patch fixes it. Signed-off-by:
-
Leif Liddy authored
commit fd865802 upstream. There's been numerous reported instances where BTUSB_QCA_ROME bluetooth controllers stop functioning upon resume from suspend. These devices seem to be losing power during suspend. Patch will detect a status change on resume and perform a reset. Signed-off-by:
Leif Liddy <leif.linux@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Kai Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Eric Biggers authored
[ Not upstream because this is a minimal fix for a bug where arm32 kernels can use a much slower implementation of AES than is actually available, potentially forcing vendors to disable encryption on their devices.] All the aes-bs (bit-sliced) and aes-ce (cryptographic extensions) algorithms had a priority of 300. This is undesirable because it means an aes-bs algorithm may be used when an aes-ce algorithm is available. The aes-ce algorithms have much better performance (up to 10x faster). Fix it by decreasing the priority of the aes-bs algorithms to 250. This was fixed upstream by commit cc477bf6 ("crypto: arm/aes - replace bit-sliced OpenSSL NEON code"), but it was just a small part of a complete rewrite. This patch just fixes the priority bug for older kernels. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
Andrey Konovalov authored
commit eb0c1994 upstream. dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer to a function. Right now a pointer to state->dib7000p_ops is passed to dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead. ------------[ cut here ]------------ kernel BUG at kernel/module.c:1081! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G W 4.14.0-rc1-42251-gebb2c243 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006a336300 task.stack: ffff88006a7c8000 RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083 RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000 RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190 RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4 R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180 R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000 FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0 Call Trace: stk7070p_frontend_attach+0x515/0x610 drivers/media/usb/dvb-usb/dib0700_devices.c:1013 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8 de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00 RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210 ---[ end trace b75b357739e7e116 ]--- Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Arvind Yadav authored
commit 58fd55e8 upstream. It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
- 18 Nov, 2017 5 commits
-
-
Greg Kroah-Hartman authored
-
Willy Tarreau authored
commit 93dc1774 upstream. Commit f4757af8 ("staging: panel: Fix single-open policy race condition") introduced in 3.19-rc1 attempted to fix a race condition on the open, but failed to properly do it and used to exit without restoring the semaphore. This results in -EBUSY being returned after the first open error until the module is reloaded or the system restarted (ie: consecutive to a dual open resulting in -EBUSY or to a permission error). Fixes: f4757af8 # 3.19-rc1 Cc: Mariusz Gorski <marius.gorski@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> [wt: driver is in misc/panel in 4.9] Signed-off-by:
-
Nicholas Bellinger authored
commit 6bcbb317 upstream. This patch drops two incorrect usages of tcm_qla2xxx_free_cmd() during TMR ABORT within tcm_qla2xxx_handle_data_work() and tcm_qla2xxx_aborted_task(), which where attempting to dispatch into workqueue context to do tcm_qla2xxx_complete_free() and subsequently invoke transport_generic_free_cmd(). This is incorrect because during TMR ABORT target-core will drop the outstanding se_cmd->cmd_kref references once it has quiesced the se_cmd via transport_wait_for_tasks(), and in the case of qla2xxx it should not attempt to do it's own transport_generic_free_cmd() once the abort has occured. As reported by Pascal, this was originally manifesting as a BUG_ON(cmd->cmd_in_wq) in qlt_free_cmd() during TMR ABORT, with a LIO backend that had sufficently high enough WRITE latency to trigger a host side TMR ABORT_TASK. (v2: Drop the qla_tgt_cmd->write_pending_abort_comp changes, as they will be addressed in a seperate series) Reported-by:
Pascal de Bruijn <p.debruijn@unilogic.nl> Tested-by:
Lukasz Engel <lukasz.engel@softax.pl> Cc: Lukasz Engel <lukasz.engel@softax.pl> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Cc: Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Bart Van Assche authored
commit 59b6986d upstream. Allocate a task management request structure for all task management requests, including task reassignment. This change avoids that the se_tmr->response assignment dereferences an uninitialized se_tmr pointer. Reported-by:
Moshe David <mdavid@infinidat.com> Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Moshe David <mdavid@infinidat.com> Signed-off-by:
-
Chi-hsien Lin authored
commit 9029679f upstream. Upon stopping an AP interface the driver disable INFRA mode effectively setting the interface in IBSS mode. However, this may affect other interfaces running in INFRA mode. For instance, if user creates and stops hostap daemon on virtual interface, then association cannot work on primary interface because default BSS has been set to IBSS mode in firmware side. The IBSS mode should be set when cfg80211 changes the interface. Reviewed-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
Chi-hsien Lin <Chi-Hsien.Lin@cypress.com> [kvalo@codeaurora.org: rephased commit log based on discussion] Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Philipp Rosenberger <p.rosenberger@linutronix.de> Signed-off-by:
-
