- 17 May, 2022 34 commits
-
-
Daniel Scally authored
The OVTI7251 sensor can be found on x86 laptops with an IPU3, and so needs to be supported by the cio2-bridge. Add it to the table of supported sensors. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
The .s_power() callback is deprecated, and now that we have pm_runtime functionality in the driver there's no further use for it. Delete the function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
Add pm_runtime support to the ov7251 driver. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
.probe() is quite busy for this driver; make it cleaner by moving the chip verification to a dedicated function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
The OV7251 sensor is used as the IR camera sensor on the Microsoft Surface line of tablets; this provides a 19.2MHz external clock, and the Windows driver for this sensor configures a 319.2MHz link freq to the CSI-2 receiver. Add the ability to support those rate to the driver by defining a new set of PLL configs. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
Rather than having the pll settings hidden inside mode blobs, define them in structs and use a dedicated function to set them. This makes it simpler to extend the driver to support other frequencies for both the external clock and desired link frequency. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
Each of the defined modes in the ov7251 driver uses the same link frequency and pixel rate; just drop those members of the modes and set the controls to read only during initialisation. Add a new table defining the supported pixel rates to substitue for the values hardcoded in the modes. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
Move the endpoint checking from .probe() to a dedicated function, and additionally check that the firmware provided link frequencies are a match for those supported by the driver. Store the index to the matching link frequency so it can be easily identified later. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
Add support for enumeration through ACPI to the ov7251 driver Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
We have platforms where a camera sensor transmits Y10 data to the CIO2 device - add support for that (packed) format to the ipu3-cio2 driver. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Daniel Scally authored
Some platforms with an Intel IPU3 have an IR sensor producing 10 bit greyscale format data that is transmitted over a CSI-2 bus to a CIO2 device - this packs the data into 32 bytes per 25 pixels. Add an entry to the uAPI header defining that format. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Moses Christopher Bollavarapu authored
of_match_ptr isn't required as CONFIG_OF is already a dependency in Kconfig Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Bingbu Cao authored
MWB gain register are used to set gain for each mwb channel mannually. However, it will involve some artifacts if gain cannot be applied to each channel synchronously. Enable global gain control to set digital global gain instead of setting AWB gain separately to fix this issue. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yang Yingliang authored
IS_ERR() and PTR_ERR() use wrong pointer, it should be sensor->dovdd, fix it. Fixes: e43ccb0a ("media: i2c: Add support for the OV5648 image sensor") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Sakari Ailus authored
Document that drivers must first initialise a media device before registering it, and clean up once the media device is unregistered. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Sakari Ailus authored
Add CSI-2 data type for 28 bits per pixel data. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Mike Pagano authored
Add V4L2_ASYNC as a dependency to match other drivers and prevent failures when compile testing. Fixes: ff3cc65c ("media: v4l: async, fwnode: Improve module organisation") Signed-off-by: Mike Pagano <mpagano@gentoo.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Moses Christopher Bollavarapu authored
Replace 0x0380 with GENMASK(9, 7) to obtain 0b0000_0011_1000_0000 Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Moses Christopher Bollavarapu authored
Acc to MLX90640 datasheet: - 0x0400 represents the start of RAM address - 0x2400 represents the start of EEPROM address Reference: https://www.melexis.com/-/media/files/documents\ /datasheets/mlx90640-datasheet-melexis.pdf Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Moses Christopher Bollavarapu authored
Currently, the defines in this driver are after some structs and functions, it makes more sense to move them up to the top of the file, so that the constants can be named together with other defines. Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Kwanghoon Son authored
Declare static on function 'fimc_isp_video_device_unregister'. When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about warning: no previous prototype for function [-Wmissing-prototypes] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kwanghoon Son <k.son@samsung.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Fabio Estevam authored
ADV7180 has a built-in mechanism to generate some video patterns, which is very useful for debug/bring-up activities. Add support for it. The test_pattern parameter can be one of the following values: 0: "Single color" 1: "Color bars" 2: "Luma ramp" 3: "Boundary box" 4: "Disable" Tested on a imx6q board with an ADV7280. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Tomi Valkeinen authored
Use get_frame_desc() to get the frame desc from the connected source, and use the provided virtual channel and datatype instead of hardcoded ones. get_frame_desc() can contain multiple streams, but as we don't support multiple streams yet, we will just always use the first stream. If the source doesn't support get_frame_desc(), fall back to the previous method of always capturing virtual channel 0 and any datatype. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Sakari Ailus authored
Add CSI-2 bus specific configuration to the frame descriptors. This allows obtaining the virtual channel and data type information for each stream the transmitter is sending. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Sakari Ailus authored
Add the media bus type to the frame descriptor. CSI-2 specific information will be added in next patch to the frame descriptor. - Make the bus type a named enum Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Xin Ji authored
No properly bus-type for DPI video bus, add bus-type 7 for it. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Xin Ji authored
As V4L2_FWNODE_BUS_TYPE_PARALLEL is not used for DPI interface, this patch add V4L2_FWNODE_BUS_TYPE_DPI for video DPI interface. Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Dongliang Mu authored
In ov7670_probe, it always invokes ov7670_power_off() no matter the execution is successful or failed. So we cannot invoke it agiain in ov7670_remove(). Fix this by removing ov7670_power_off from ov7670_remove. Fixes: 030f9f68 ("media: ov7670: control clock along with power") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Sakari Ailus authored
There is firmware out there that uses "dongwoon,dw9807" compatible string that never made it to upstream as-is. Add it to the driver to make it load on such systems. The chip also has an EEPROM part which is AT24 compatible (for reading purposes) on a separate I²C address. Adding possible support for this in the future is not affected by this change. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Sakari Ailus authored
Convert the old text based dw9807-vcm chip DT bindings to json-schema. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Bryan O'Donoghue authored
Depending on the platform we may need to enable and disable three separate regulators for the imx412. - DOVDD Digital I/O power - AVDD Analog power - DVDD Digital core power The addition of these regulators shouldn't affect existing users using fixed-on/firmware-controlled regulators. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Bryan O'Donoghue authored
The imx412 like many I2C camera sensors has three voltage rails which depending on platform may be necessary to switch power onto directly. Add in as optional rails so as not to break anything for existing users. Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Bryan O'Donoghue authored
The enable path does - gpio - clock The disable path does - gpio - clock Fix the order on the power-off path so that power-off and power-on have the same ordering for clock and gpio. Fixes: 9214e86c ("media: i2c: Add imx412 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Bryan O'Donoghue authored
The imx412/imx577 sensor has a reset line that is active low not active high. Currently the logic for this is inverted. The right way to define the reset line is to declare it active low in the DTS and invert the logic currently contained in the driver. The DTS should represent the hardware does i.e. reset is active low. So: + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; not: - reset-gpios = <&tlmm 78 GPIO_ACTIVE_HIGH>; I was a bit reticent about changing this logic since I thought it might negatively impact @intel.com users. Googling a bit though I believe this sensor is used on "Keem Bay" which is clearly a DTS based system and is not upstream yet. Fixes: 9214e86c ("media: i2c: Add imx412 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
- 13 May, 2022 6 commits
-
-
Nicolas Dufresne authored
For long term references, frame_num is set to long_term_frame_idx which does not require wrapping. This is fixed by observation, no directly related issue have been found yet. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Nicolas Dufresne authored
If the timestamp of the src buffer differs from the timestamp of a held dst buffer, the held buffer is implicitly removed and marked as done. Add a trace to help debugging if someone hits that case. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Nicolas Dufresne authored
These two fields need documentation as they have dual meaning. It is also confusing since pic_num is a derived value from frame_num, so this should help application developers. If we ever need to make a V2 of this API, I would suggest to remove pic_num entirely. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yunfei Dong authored
Add h264 decode driver to support mt8186. For the architecture is single core, need to add new interface to decode. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yunfei Dong authored
Adds MT8186's compatible "mediatek,mt8186-vcodec-dec". Adds MT8186's device private data mtk_vdec_single_core_pdata. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yunfei Dong authored
Adds decoder dt-bindings for mt8186. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-