Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.

Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)

Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_misc_intr() is an irq handler. It should not sleep.

Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held.  This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev.  Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.

Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.

This logic was added to the ice driver in commit 1071a835 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit 5c3c48ac ("i40e: implement virtual
device interface").

Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.

The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.

Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.

This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.

In fact, the change from dev_err to dev_info in i40e commit 18b7af57
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.

We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.

Fixes: 1071a835 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.

This logic originates from the early implementation of VF support in
commit 5c3c48ac ("i40e: implement virtual device interface").

That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.

There is no justification for this behavior in the original
implementation. In fact, a later commit 18b7af57 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 01cbf508 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.

That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.

It is clear this check does not make sense, and causes problems which
led to ugly workarounds.

Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.

Fixes: 01cbf508 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes: 5c3c48ac ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED
which should indicate that interrupts need to be completely
reinitialized during reset leads to RTNL deadlocks using ethtool -C
while a reset is in progress.
To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED
used to trigger MSI-X reinit.
New combined setting is fixed adopt after VF reset.
This has been implemented by call reinit interrupt scheme
during VF reset.
Without this fix new combined setting has never been adopted.

Fixes: 209f2f9c ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.

Fixes: 5951a2b9 ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.

Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.ukSigned-off-by: Paolo Abeni <pabeni@redhat.com>

According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.

This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.

This causes the following errors to be shown on reboot, for example:

ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system

Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.

Fixes: a049a30f ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
  garbage or undefined
  ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
                   ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status.  So change the decl to return status.

Fixes: 73390ac9 ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skb->len field is read after the packet is sent to the network
stack. In the meantime, skb can be freed. This patch fixes this bug.

Fixes: c3e6b2c3 ("net: lantiq_xrx200: add ingress SG DMA support")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so
its return value should be checked.

Fixes: 1408cc1f ("qed: Introduce VFs")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function dma_set_mask() in setup_hw() can fail, so its return value
should be checked.

Fixes: 1700fe1a ("Add mISDN HFC PCI driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the blamed commit, dsa_tree_setup_master() may exit without
calling rtnl_unlock(), fix that.

Fixes: c146f9bc ("net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown}")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dsp_pipeline_build() allocates dup pointer by kstrdup(cfg),
but then it updates dup variable by strsep(&dup, "|").
As a result when it calls kfree(dup), the dup variable contains NULL.

Found by Linux Driver Verification project (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 960366cf ("Add mISDN DSP")
Signed-off-by: David S. Miller <davem@davemloft.net>

This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.

This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).

This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.

Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When enabling a bearer on a node, a kernel panic is observed:

[    4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc]
...
[    4.520030] Call Trace:
[    4.520689]  <IRQ>
[    4.521236]  tipc_link_build_proto_msg+0x375/0x750 [tipc]
[    4.522654]  tipc_link_build_state_msg+0x48/0xc0 [tipc]
[    4.524034]  __tipc_node_link_up+0xd7/0x290 [tipc]
[    4.525292]  tipc_rcv+0x5da/0x730 [tipc]
[    4.526346]  ? __netif_receive_skb_core+0xb7/0xfc0
[    4.527601]  tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[    4.528737]  __netif_receive_skb_list_core+0x20b/0x260
[    4.530068]  netif_receive_skb_list_internal+0x1bf/0x2e0
[    4.531450]  ? dev_gro_receive+0x4c2/0x680
[    4.532512]  napi_complete_done+0x6f/0x180
[    4.533570]  virtnet_poll+0x29c/0x42e [virtio_net]
...

The node in question is receiving activate messages in another
thread after changing bearer status to allow message sending/
receiving in current thread:

         thread 1           |              thread 2
         --------           |              --------
                            |
tipc_enable_bearer()        |
  test_and_set_bit_lock()   |
    tipc_bearer_xmit_skb()  |
                            | tipc_l2_rcv_msg()
                            |   tipc_rcv()
                            |     __tipc_node_link_up()
                            |       tipc_link_build_state_msg()
                            |         tipc_link_build_proto_msg()
                            |           tipc_mon_prep()
                            |           {
                            |             ...
                            |             // null-pointer dereference
                            |             u16 gen = mon->dom_gen;
                            |             ...
                            |           }
  // Not being executed yet |
  tipc_mon_create()         |
  {                         |
    ...                     |
    // allocate             |
    mon = kzalloc();        |
    ...                     |
  }                         |

Monitoring pointer in thread 2 is dereferenced before monitoring data
is allocated in thread 1. This causes kernel panic.

This commit fixes it by allocating the monitoring data before enabling
the bearer to receive messages.

Fixes: 35c55c98 ("tipc: add neighbor monitoring framework")
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.

This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.

Fixes: 02f7a34f ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix regression with processing of MGMT commands
 - Fix unbalanced unlock in Set Device Flags

* tag 'for-net-2022-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: hci_sync: Fix not processing all entries on cmd_sync_work
  Bluetooth: hci_core: Fix unbalanced unlock in set_device_flags()
====================

Link: https://lore.kernel.org/r/20220303210743.314679-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from can, xfrm, wifi, bluetooth, and netfilter.

  Lots of various size fixes, the length of the tag speaks for itself.
  Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
  which had been lagging as you pointed out previously. But there's also
  a larger than we'd like portion of fixes for bugs from previous
  releases.

  Three more fixes still under discussion, including and xfrm revert for
  uAPI error.

  Current release - regressions:

   - iwlwifi: don't advertise TWT support, prevent FW crash

   - xfrm: fix the if_id check in changelink

   - xen/netfront: destroy queues before real_num_tx_queues is zeroed

   - bluetooth: fix not checking MGMT cmd pending queue, make scanning
     work again

  Current release - new code bugs:

   - mptcp: make SIOCOUTQ accurate for fallback socket

   - bluetooth: access skb->len after null check

   - bluetooth: hci_sync: fix not using conn_timeout

   - smc: fix cleanup when register ULP fails

   - dsa: restore error path of dsa_tree_change_tag_proto

   - iwlwifi: fix build error for IWLMEI

   - iwlwifi: mvm: propagate error from request_ownership to the user

  Previous releases - regressions:

   - xfrm: fix pMTU regression when reported pMTU is too small

   - xfrm: fix TCP MSS calculation when pMTU is close to 1280

   - bluetooth: fix bt_skb_sendmmsg not allocating partial chunks

   - ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks

   - ipv6: prevent leaks in igmp6 when input queues get full

   - fix up skbs delta_truesize in UDP GRO frag_list

   - eth: e1000e: fix possible HW unit hang after an s0ix exit

   - eth: e1000e: correct NVM checksum verification flow

   - ptp: ocp: fix large time adjustments

  Previous releases - always broken:

   - tcp: make tcp_read_sock() more robust in presence of urgent data

   - xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate

   - xfrm: fix xfrm_migrate issues when address family changes

   - dcb: flush lingering app table entries for unregistered devices

   - smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error

   - mac80211: fix EAPoL rekey fail in 802.3 rx path

   - mac80211: fix forwarded mesh frames AC & queue selection

   - netfilter: nf_queue: fix socket access races and bugs

   - batman-adv: fix ToCToU iflink problems and check the result belongs
     to the expected net namespace

   - can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting

   - can: rcar_canfd: register the CAN device when fully ready

   - eth: igb, igc: phy: drop premature return leaking HW semaphore

   - eth: ixgbe: xsk: change !netif_carrier_ok() handling in
     ixgbe_xmit_zc(), prevent live lock when link goes down

   - eth: stmmac: only enable DMA interrupts when ready

   - eth: sparx5: move vlan checks before any changes are made

   - eth: iavf: fix races around init, removal, resets and vlan ops

   - ibmvnic: more reset flow fixes

  Misc:

   - eth: fix return value of __setup handlers"

* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
  net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
  ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
  selftests: mlxsw: resource_scale: Fix return value
  selftests: mlxsw: tc_police_scale: Make test more robust
  net: dcb: disable softirqs in dcbnl_flush_dev()
  bnx2: Fix an error message
  sfc: extend the locking on mcdi->seqno
  net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
  net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
  net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
  tcp: make tcp_read_sock() more robust
  bpf, sockmap: Do not ignore orig_len parameter
  net: ipa: add an interconnect dependency
  net: fix up skbs delta_truesize in UDP GRO frag_list
  iwlwifi: mvm: return value for request_ownership
  nl80211: Update bss channel on channel switch for P2P_CLIENT
  iwlwifi: fix build error for IWLMEI
  ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
  batman-adv: Don't expect inter-netns unique iflink indices
  ...

Pull MIPS fixes from Thomas Bogendoerfer:

 - Fix memory detection for MT7621 devices

 - Fix setnocoherentio kernel option

 - Fix warning when CONFIG_SCHED_CORE is enabled

* tag 'mips-fixes-5.17_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: ralink: mt7621: use bitwise NOT instead of logical
  mips: setup: fix setnocoherentio() boolean setting
  MIPS: smp: fill in sibling and core maps earlier
  MIPS: ralink: mt7621: do memory detection on KSEG1

Pull auxdisplay fixes from Miguel Ojeda:
 "A few lcd2s fixes from Andy Shevchenko"

* tag 'auxdisplay-for-linus-v5.17-rc7' of git://github.com/ojeda/linux:
  auxdisplay: lcd2s: Use proper API to free the instance of charlcd object
  auxdisplay: lcd2s: Fix memory leak in ->remove()
  auxdisplay: lcd2s: Fix lcd2s_redefine_char() feature

While investigating on why a synchronize_net() has been added recently
in ipv6_mc_down(), I found that igmp6_event_query() and igmp6_event_report()
might drop skbs in some cases.

Discussion about removing synchronize_net() from ipv6_mc_down()
will happen in a different thread.

Fixes: f185de28 ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220303173728.937869-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The blamed commit said one thing but did another. It explains that we
should restore the "return err" to the original "goto out_unwind_tagger",
but instead it replaced it with "goto out_unlock".

When DSA_NOTIFIER_TAG_PROTO fails after the first switch of a
multi-switch tree, the switches would end up not using the same tagging
protocol.

Fixes: 0b0e2ff1 ("net: dsa: restore error path of dsa_tree_change_tag_proto")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220303154249.1854436-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit c685c69f ("ixgbe: don't do any AF_XDP zero-copy transmit if
netif is not OK") addressed the ring transient state when
MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the
interface to through down/up. Maurice reported that when carrier is not
ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU
cycles due to the constant NAPI rescheduling as ixgbe_poll() states that
there is still some work to be done.

To fix this, do not set work_done to false for a !netif_carrier_ok().

Fixes: c685c69f ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK")
Reported-by: Maurice Baijens <maurice.baijens@ellips.com>
Tested-by: Maurice Baijens <maurice.baijens@ellips.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
selftests: mlxsw: A couple of fixes

Patch #1 fixes a breakage due to a change in iproute2 output. The real
problem is not iproute2, but the fact that the check was not strict
enough. Fixed by using JSON output instead. Targeting at net so that the
test will pass as part of old and new kernels regardless of iproute2
version.

Patch #2 fixes an issue uncovered by the first one.
====================

Link: https://lore.kernel.org/r/20220302161447.217447-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The test runs several test cases and is supposed to return an error in
case at least one of them failed.

Currently, the check of the return value of each test case is in the
wrong place, which can result in the wrong return value. For example:

 # TESTS='tc_police' ./resource_scale.sh
 TEST: 'tc_police' [default] 968                                     [FAIL]
         tc police offload count failed
 Error: mlxsw_spectrum: Failed to allocate policer index.
 We have an error talking to the kernel
 Command failed /tmp/tmp.i7Oc5HwmXY:969
 TEST: 'tc_police' [default] overflow 969                            [ OK ]
 ...
 TEST: 'tc_police' [ipv4_max] overflow 969                           [ OK ]

 $ echo $?
 0

Fix this by moving the check to be done after each test case.

Fixes: 059b18e2 ("selftests: mlxsw: Return correct error code in resource scale test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.

iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:

 $ tc filter show dev swp2 ingress
 ...
 filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
   eth_type ipv6
   dst_ip 2001:db8:1::7bf
   skip_sw
   in_hw in_hw_count 1
         action order 1:  police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
         ref 1 bind 1
         not_in_hw
         used_hw_stats immediate

The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.

Fix that by using JSON output instead.

Fixes: 5061e773 ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel points out that since commit 52cff74e ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.

One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
   -> dcb_ieee_setapp

If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().

Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.

Fixes: 91b0383f ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

seqno could be read as a stale value outside of the lock. The lock is
already acquired to protect the modification of seqno against a possible
race condition. Place the reading of this value also inside this locking
to protect it against a possible race condition.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hci_cmd_sync_queue can be called multiple times, each adding a
hci_cmd_sync_work_entry, before hci_cmd_sync_work is run so this makes
sure they are all dequeued properly otherwise it creates a backlog of
entries that are never run.

Link: https://lore.kernel.org/all/CAJCQCtSeUtHCgsHXLGrSTWKmyjaQDbDNpP4rb0i+RE+L2FTXSA@mail.gmail.com/T/
Fixes: 6a98e383 ("Bluetooth: Add helper for serialized HCI command execution")
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

There is only one "goto done;" in set_device_flags() and this happens
*before* hci_dev_lock() is called, move the done label to after the
hci_dev_unlock() to fix the following unlock balance:

[   31.493567] =====================================
[   31.493571] WARNING: bad unlock balance detected!
[   31.493576] 5.17.0-rc2+ #13 Tainted: G         C  E
[   31.493581] -------------------------------------
[   31.493584] bluetoothd/685 is trying to release lock (&hdev->lock) at:
[   31.493594] [<ffffffffc07603f5>] set_device_flags+0x65/0x1f0 [bluetooth]
[   31.493684] but there are no more locks to release!

Note this bug has been around for a couple of years, but before
commit fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags")
supported_flags was hardcoded to "((1U << HCI_CONN_FLAG_MAX) - 1)" so
the check for unsupported flags which does the "goto done;" never
triggered.

Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

D. Wythe says:

====================
fix unexpected SMC_CLC_DECL_ERR_REGRMB error

We can easily trigger the SMC_CLC_DECL_ERR_REGRMB exception within
following script:

server: smc_run nginx
client: smc_run  ./wrk -c 2000 -t 8 -d 20 http://smc-server

And we can clearly see that this error is also divided into two types:

1. 0x09990003
2. 0x05000000/0x09990003

Which has the same root causes, but the immediate causes vary.

The root cause of this issues is that remove connections from link group
is not synchronous with add/delete rtoken entry,  which means that even
the number of connections is less that SMC_RMBS_PER_LGR_MAX, it does not
mean that the connection can register rtoken successfully later. In
other words, the rtoken entry may released, This will cause an
unexpected SMC_CLC_DECL_ERR_REGRMB to be reported, and then this SMC
connections have to fallback to TCP.

This patch set handles two types of SMC_CLC_DECL_ERR_REGRMB exceptions
from different perspectives.

Patch 1: fix the 0x05000000/0x09990003 error.
Patch 2: fix the 0x09990003 error.

After those patches, there is no SMC_CLC_DECL_ERR_REGRMB exceptions in
my
test case any more.

v1 -> v2:
- add bugfix patch for SMC_CLC_DECL_ERR_REGRMB cause by server side
v2 -> v3:
- fix incorrect mail thread
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear.
Based on the fact that whether a new SMC connection can be accepted or
not depends on not only the limit of conn nums, but also the available
entries of rtoken. Since the rtoken release is trigger by peer, while
the conn nums is decrease by local, tons of thing can happen in this
time difference.

This only thing that needs to be mentioned is that now all connection
creations are completely protected by smc_server_lgr_pending lock, it's
enough to check only the available entries in rtokens_used_mask.

Fixes: cd6851f3 ("smc: remote memory buffers (RMBs)")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client
dues to following execution sequence:

Server Conn A:           Server Conn B:			Client Conn B:

smc_lgr_unregister_conn
                        smc_lgr_register_conn
                        smc_clc_send_accept     ->
                                                        smc_rtoken_add
smcr_buf_unuse
		->		Client Conn A:
				smc_rtoken_delete

smc_lgr_unregister_conn() makes current link available to assigned to new
incoming connection, while smcr_buf_unuse() has not executed yet, which
means that smc_rtoken_add may fail because of insufficient rtoken_entry,
reversing their execution order will avoid this problem.

Fixes: 3e034725 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.

The following log reveals it:

[    3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[    3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[    3.975181] Call Trace:
[    3.976208]  local_pci_probe+0x13f/0x210
[    3.977248]  pci_device_probe+0x34c/0x6d0
[    3.977255]  ? pci_uevent+0x470/0x470
[    3.978265]  really_probe+0x24c/0x8d0
[    3.978273]  __driver_probe_device+0x1b3/0x280
[    3.979288]  driver_probe_device+0x50/0x370

Fix this by checking whether the 'ci' is a null pointer first.

Fixes: 8c14f9c7 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If recv_actor() returns an incorrect value, tcp_read_sock()
might loop forever.

Instead, issue a one time warning and make sure to make progress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, sk_psock_verdict_recv() returns skb->len

This is problematic because tcp_read_sock() might have
passed orig_len < skb->len, due to the presence of TCP urgent data.

This causes an infinite loop from tcp_read_sock()

Followup patch will make tcp_read_sock() more robust vs bad actors.

Fixes: ef565928 ("bpf, sockmap: Allow skipping sk_skb parser program")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>