Audit IOMMU Capability/Extended Capability and check if the IOMMUs have
the consistent value for features. Report out or scale to the lowest
supported when IOMMU features have incompatibility among IOMMUs.

Report out features when below features are mismatched:
  - First Level 5 Level Paging Support (FL5LP)
  - First Level 1 GByte Page Support (FL1GP)
  - Read Draining (DRD)
  - Write Draining (DWD)
  - Page Selective Invalidation (PSI)
  - Zero Length Read (ZLR)
  - Caching Mode (CM)
  - Protected High/Low-Memory Region (PHMR/PLMR)
  - Required Write-Buffer Flushing (RWBF)
  - Advanced Fault Logging (AFL)
  - RID-PASID Support (RPS)
  - Scalable Mode Page Walk Coherency (SMPWC)
  - First Level Translation Support (FLTS)
  - Second Level Translation Support (SLTS)
  - No Write Flag Support (NWFS)
  - Second Level Accessed/Dirty Support (SLADS)
  - Virtual Command Support (VCS)
  - Scalable Mode Translation Support (SMTS)
  - Device TLB Invalidation Throttle (DIT)
  - Page Drain Support (PDS)
  - Process Address Space ID Support (PASID)
  - Extended Accessed Flag Support (EAFS)
  - Supervisor Request Support (SRS)
  - Execute Request Support (ERS)
  - Page Request Support (PRS)
  - Nested Translation Support (NEST)
  - Snoop Control (SC)
  - Pass Through (PT)
  - Device TLB Support (DT)
  - Queued Invalidation (QI)
  - Page walk Coherency (C)

Set capability to the lowest supported when below features are mismatched:
  - Maximum Address Mask Value (MAMV)
  - Number of Fault Recording Registers (NFR)
  - Second Level Large Page Support (SLLPS)
  - Fault Recording Offset (FRO)
  - Maximum Guest Address Width (MGAW)
  - Supported Adjusted Guest Address Width (SAGAW)
  - Number of Domains supported (NDOMS)
  - Pasid Size Supported (PSS)
  - Maximum Handle Mask Value (MHMV)
  - IOTLB Register Offset (IRO)
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210130184452.31711-1-kyung.min.park@intel.com
Link: https://lore.kernel.org/r/20210204014401.2846425-3-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Fix misspellings of "physical".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/linux-iommu/20210126211738.2920789-1-helgaas@kernel.org
Link: https://lore.kernel.org/r/20210204014401.2846425-2-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

trace_qi_submit() could be used when interrupt remapping is supported,
but DMA remapping is not. In this case, the following compile error
occurs.

../drivers/iommu/intel/dmar.c: In function 'qi_submit_sync':
../drivers/iommu/intel/dmar.c:1311:3: error: implicit declaration of function 'trace_qi_submit';
  did you mean 'ftrace_nmi_exit'? [-Werror=implicit-function-declaration]
   trace_qi_submit(iommu, desc[i].qw0, desc[i].qw1,
   ^~~~~~~~~~~~~~~
   ftrace_nmi_exit

Fixes: f2dd8717 ("iommu/vt-d: Add qi_submit trace event")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210130151907.3929148-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The VT-d IOMMU response RESPONSE_FAILURE for a page request in below
cases:

- When it gets a Page_Request with no PASID;
- When it gets a Page_Request with PASID that is not in use for this
  device.

This is allowed by the spec, but IOMMU driver doesn't support such cases
today. When the device receives RESPONSE_FAILURE, it sends the device
state machine to HALT state. Now if we try to unload the driver, it hangs
since the device doesn't send any outbound transactions to host when the
driver is trying to clear things up. The only possible responses would be
for invalidation requests.

Let's use RESPONSE_INVALID instead for now, so that the device state
machine doesn't enter HALT state.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210126080730.2232859-3-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

It is incorrect to always clear PRO when it's set w/o first checking
whether the overflow condition has been cleared. Current code assumes
that if an overflow condition occurs it must have been cleared by earlier
loop. However since the code runs in a threaded context, the overflow
condition could occur even after setting the head to the tail under some
extreme condition. To be sane, we should read both head/tail again when
seeing a pending PRO and only clear PRO after all pending PRs have been
handled.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/linux-iommu/MWHPR11MB18862D2EA5BD432BF22D99A48CA09@MWHPR11MB1886.namprd11.prod.outlook.com/
Link: https://lore.kernel.org/r/20210126080730.2232859-2-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210115004202.953965-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

This adds a new trace event to track the submissions of requests to the
invalidation queue. This event will provide the information like:
- IOMMU name
- Invalidation type
- Descriptor raw data

A sample output like:
| qi_submit: iotlb_inv dmar1: 0x100e2 0x0 0x0 0x0
| qi_submit: dev_tlb_inv dmar1: 0x1000000003 0x7ffffffffffff001 0x0 0x0
| qi_submit: iotlb_inv dmar2: 0x800f2 0xf9a00005 0x0 0x0

This will be helpful for queued invalidation related debugging.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210114090400.736104-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The pasid based IOTLB and devTLB invalidation code is duplicate in
several places. Consolidate them by using the common helpers.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210114085021.717041-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pull arch/sh updates from Rich Felker:
 "Cleanup and warning fixes"

* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
  sh/intc: Restore devm_ioremap() alignment
  sh: mach-sh03: remove duplicate include
  arch: sh: remove duplicate include
  sh: Drop ARCH_NR_GPIOS definition
  sh: Remove unused HAVE_COPY_THREAD_TLS macro
  sh: remove CONFIG_IDE from most defconfig
  sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
  sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
  arch/sh: hyphenate Non-Uniform in Kconfig prompt
  sh: dma: fix kconfig dependency for G2_DMA

Pull io_uring fixes from Jens Axboe:
 "Still need a final cancelation fix that isn't quite done done,
  expected in the next day or two. That said, this contains:

   - Wakeup fix for IOPOLL requests

   - SQPOLL split close op handling fix

   - Ensure that any use of io_uring fd itself is marked as inflight

   - Short non-regular file read fix (Pavel)

   - Fix up bad false positive warning (Pavel)

   - SQPOLL fixes (Pavel)

   - In-flight removal fix (Pavel)"

* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  io_uring: account io_uring internal files as REQ_F_INFLIGHT
  io_uring: fix sleeping under spin in __io_clean_op
  io_uring: fix short read retries for non-reg files
  io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
  io_uring: fix skipping disabling sqo on exec
  io_uring: fix uring_flush in exit_files() warning
  io_uring: fix false positive sqo warning on flush
  io_uring: iopoll requests should also wake task ->in_idle state

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
      - fix a status code in nvmet (Chaitanya Kulkarni)
      - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
      - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
      - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
      - fix a double DMA unmap in nvme-pci

 - lightnvm error path leak fix (Pan)

 - MD pull request from Song:
      - Flush request fix (Xiao)

* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  lightnvm: fix memory leak when submit fails
  nvme-pci: fix error unwind in nvme_map_data
  nvme-pci: refactor nvme_unmap_data
  md: Set prev_flush_start and flush_bio in an atomic way
  nvmet: set right status on error in id-ns handler
  nvme-pci: allow use of cmb on v1.4 controllers
  nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
  nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
  nvme: check the PRINFO bit before deciding the host buffer length

Merge misc fixes from Andrew Morton:
 "18 patches.

  Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
  memory-failure, and highmem), ubsan, proc, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: add a couple more files to the Clang/LLVM section
  proc_sysctl: fix oops caused by incorrect command parameters
  powerpc/mm/highmem: use __set_pte_at() for kmap_local()
  mips/mm/highmem: use set_pte() for kmap_local()
  mm/highmem: prepare for overriding set_pte_at()
  sparc/mm/highmem: flush cache and TLB
  mm: fix page reference leak in soft_offline_page()
  ubsan: disable unsigned-overflow check for i386
  kasan, mm: fix resetting page_alloc tags for HW_TAGS
  kasan, mm: fix conflicts with init_on_alloc/free
  kasan: fix HW_TAGS boot parameters
  kasan: fix incorrect arguments passing in kasan_add_zero_shadow
  kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
  mm: fix numa stats for thp migration
  mm: memcg: fix memcg file_dirty numa stat
  mm: memcg/slab: optimize objcg stock draining
  mm: fix initialization of struct page for holes in memory layout
  x86/setup: don't remove E820_TYPE_RAM for pfn 0

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.11-rc5:

   - habanalabs driver fixes

   - phy driver fixes

   - hwtracing driver fixes

   - rtsx cardreader driver fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: init value of aspm_enabled
  habanalabs: disable FW events on device removal
  habanalabs: fix backward compatibility of idle check
  habanalabs: zero pci counters packet before submit to FW
  intel_th: pci: Add Alder Lake-P support
  stm class: Fix module init return on allocation failure
  habanalabs: prevent soft lockup during unmap
  habanalabs: fix reset process in case of failures
  habanalabs: fix dma_addr passed to dma_mmap_coherent
  phy: mediatek: allow compile-testing the dsi phy
  phy: cpcap-usb: Fix warning for missing regulator_disable
  PHY: Ingenic: fix unconditional build of phy-ingenic-usb

Merge tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some small driver core fixes for 5.11-rc5 that resolve some
  reported problems:

   - revert of a -rc1 patch that was causing problems with some machines

   - device link device name collision problem fix (busses only have to
     name devices unique to their bus, not unique to all busses)

   - kernfs splice bugfixes to resolve firmware loading problems for
     Qualcomm systems.

   - other tiny driver core fixes for minor issues reported.

  All of these have been in linux-next with no reported problems"

* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix device link device name collision
  driver core: Extend device_is_dependent()
  kernfs: wire up ->splice_read and ->splice_write
  kernfs: implement ->write_iter
  kernfs: implement ->read_iter
  Revert "driver core: Reorder devices on successful probe"
  Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  drivers core: Free dma_range_map when driver probe failed

Pull staging/IIO driver fixes from Greg KH:
 "Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
  problems.

  Nothing major, just a few small fixes, all of these have been in
  linux-next for a while and full details are in the shortlog"

* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  iio: ad5504: Fix setting power-down state
  counter:ti-eqep: remove floor
  drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  iio: sx9310: Off by one in sx9310_read_thresh()

Pull tty/serial fixes from Greg KH:
 "Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
  problems:

   - two patches to fix up writing to ttys with splice

   - mvebu-uart driver fix for reported problem

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix up hung_up_tty_write() conversion
  tty: implement write_iter
  serial: mvebu-uart: fix tx lost characters at power off

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.11-rc5.  They resolve:

   - xhci issues for some reported problems

   - ehci driver issue for one specific device

   - USB gadget fixes for some reported problems

   - cdns3 driver fixes for issues reported

   - MAINTAINERS file update

   - thunderbolt minor fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: bdc: Make bdc pci driver depend on BROKEN
  xhci: tegra: Delay for disabling LFPS detector
  xhci: make sure TRB is fully written before giving it to the controller
  usb: udc: core: Use lock when write to soft_connect
  USB: gadget: dummy-hcd: Fix errors in port-reset handling
  usb: gadget: aspeed: fix stop dma register setting.
  USB: ehci: fix an interrupt calltrace error
  ehci: fix EHCI host controller initialization sequence
  MAINTAINERS: update Peter Chen's email address
  thunderbolt: Drop duplicated 0x prefix from format string
  MAINTAINERS: Update address for Cadence USB3 driver
  usb: cdns3: imx: improve driver .remove API
  usb: cdns3: imx: fix can't create core device the second time issue
  usb: cdns3: imx: fix writing read-only memory issue

The K: entry should ensure that Nick and I always get CC'd on patches that
touch these files but it is better to be explicit rather than implicit.

Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.comSigned-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val).  If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.

For example:
  "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
  triggered. The call stack is as follows:
    Kernel command line: .... hung_task_panic
    ......
    Call trace:
    __pi_strlen+0x10/0x98
    parse_args+0x278/0x344
    do_sysctl_args+0x8c/0xfc
    kernel_init+0x5c/0xf4
    ret_from_fork+0x10/0x30

To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().

Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d4 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>	[5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU.  This got lost with the conversion
to the generic implementation.

Override the default map function.

Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b2 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().

Use set_pte() like the original MIPS highmem implementation did.

Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().

Provide arch_kmap_local_set_pte() and default it to set_pte_at().

Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".

The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.

This patch (of 4):

The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.

Sparc requires cache flush before map/unmap and tlb flush afterwards.

Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa9 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.

Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.

When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.

Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a6 ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Building ubsan kernels even for compile-testing introduced these
warnings in my randconfig environment:

  crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=]
  static void blake2b_compress(struct blake2b_state *S,

  crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=]
  static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src,

  lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])

  lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])

Further testing showed that this is caused by
-fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86
architecture.

The one in blake2b immediately overflows the 8KB stack area
architectures, so better ensure this never happens by disabling the
option for 32-bit x86.

Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/
Fixes: d0a3ac54 ("ubsan: enable for all*config builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marco Elver <elver@google.com>
Cc: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.

That commit did reset page tags before the metadata access, but didn't
restore them after.  As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.

Fix this by recovering the tag after the metadata access.

Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes: aa1ef4d7 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A few places where SLUB accesses object's data or metadata were missed
in a previous patch.  This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.

Fix the false-positives by resetting pointer tags during these accesses.

(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
 into maybe_wipe_obj_freeptr.)

Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901
Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com
Fixes: aa1ef4d7 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The initially proposed KASAN command line parameters are redundant.

This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead.  The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.

The full set of parameters with this change:

  kasan=off/on             - whether KASAN is enabled
  kasan.fault=report/panic - whether to only print a report or also panic
  kasan.stacktrace=off/on  - whether to collect alloc/free stack traces

Default values:

  kasan=on
  kasan.fault=report
  kasan.stacktrace=on  (if CONFIG_DEBUG_KERNEL=y)
  kasan.stacktrace=off (otherwise)

Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.

Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4f ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.

In the test case for kasan_remove_zero_shadow():

    shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000

    3-level page table:
      PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K

0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.

In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.

Fix by correcting the condition when next and addr are neither aligned.

Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4f ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Borislav Petkov:

 - Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.

 - Fix to not lose IPIs on bcm2836.

 - Fix for a bogus marking of ITS devices as shared due to unitialized
   stack variable.

 - Clear a phantom interrupt on qcom-pdc to unblock suspend.

 - Small cleanups, warning and build fixes.

* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export irq_check_status_bit()
  irqchip/mips-cpu: Set IPI domain parent chip
  irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
  irqchip/loongson-liointc: Fix build warnings
  driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
  irqchip/irq-sl28cpld: Convert comma to semicolon
  genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()

Pull objtool fixes from Borislav Petkov:

 - Adjust objtool to handle a recent binutils change to not generate
   unused symbols anymore.

 - Revert the fail-the-build-on-fatal-errors objtool strategy for now
   due to the ever-increasing matrix of supported toolchains/plugins and
   them causing too many such fatal errors currently.

 - Do not add empty symbols to objdump's rbtree to accommodate clang
   removing section symbols.

* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Don't fail on missing symbol table
  objtool: Don't fail the kernel build on fatal errors
  objtool: Don't add empty symbols to the rbtree

Pull scheduler fixes from Borislav Petkov:

 - Correct the marking of kthreads which are supposed to run on a
   specific, single CPU vs such which are affine to only one CPU, mark
   per-cpu workqueue threads as such and make sure that marking
   "survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.

 - A fix to not push away tasks on CPUs coming online.

 - Have workqueue CPU hotplug code use cpu_possible_mask when breaking
   affinity on CPU offlining so that pending workers can finish on newly
   arrived onlined CPUs too.

 - Dump tasks which haven't vacated a CPU which is currently being
   unplugged.

 - Register a special scale invariance callback which gets called on
   resume from RAM to read out APERF/MPERF after resume and thus make
   the schedutil scaling governor more precise.

* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Relax the set_cpus_allowed_ptr() semantics
  sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
  sched: Prepare to use balance_push in ttwu()
  workqueue: Restrict affinity change to rescuer
  workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
  kthread: Extract KTHREAD_IS_PER_CPU
  sched: Don't run cpu-online with balance_push() enabled
  workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
  sched/core: Print out straggler tasks in sched_cpu_dying()
  x86: PM: Register syscore_ops for scale invariance

Pull timer fixes from Borislav Petkov:

 - Fix an integer overflow in the NTP RTC synchronization which led to
   the latter happening every 2 seconds instead of the intended every 11
   minutes.

 - Get rid of now unused get_seconds().

* tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Fix RTC synchronization on 32-bit platforms
  timekeeping: Remove unused get_seconds()

Pull x86 fixes from Borislav Petkov:

 - Add a new Intel model number for Alder Lake

 - Differentiate which aspects of the FPU state get saved/restored when
   the FPU is used in-kernel and fix a boot crash on K7 due to early
   MXCSR access before CR4.OSFXSR is even set.

 - A couple of noinstr annotation fixes

 - Correct die ID setting on AMD for users of topology information which
   need the correct die ID

 - A SEV-ES fix to handle string port IO to/from kernel memory properly

* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add another Alder Lake CPU to the Intel family
  x86/mmx: Use KFPU_387 for MMX string operations
  x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
  x86/topology: Make __max_die_per_package available unconditionally
  x86: __always_inline __{rd,wr}msr()
  x86/mce: Remove explicit/superfluous tracing
  locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
  locking/lockdep: Cure noinstr fail
  x86/sev: Fix nonistr violation
  x86/entry: Fix noinstr fail
  x86/cpu/amd: Set __max_die_per_package on AMD
  x86/sev-es: Handle string port IO to kernel memory properly

Pull powerpc fixes from Michael Ellerman:

 - Fix a bad interaction between the scv handling and the fallback L1D
   flush, which could lead to user register corruption. Only affects
   people using scv (~no one) on machines with old firmware that are
   missing the L1D flush.

 - Two small selftest fixes.

Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.

* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: fix scv entry fallback flush vs interrupt
  selftests/powerpc: Only test lwm/stmw on big endian
  selftests/powerpc: Fix exit status of pkey tests

Pull misc fixes from Christian Brauner:

 - Jann reported sparse complaints because of a missing __user
   annotation in a helper we added way back when we added
   pidfd_send_signal() to avoid compat syscall handling. Fix it.

 - Yanfei replaces a reference in a comment to the _do_fork() helper I
   removed a while ago with a reference to the new kernel_clone()
   replacement

 - Alexander Guril added a simple coding style fix

* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  kthread: remove comments about old _do_fork() helper
  Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
  signal: Add missing __user annotation to copy_siginfo_from_user_any

Pull cifs fixes from Steve French:
 "An important signal handling patch for stable, and two small cleanup
  patches"

* tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not fail __smb_send_rqst if non-fatal signals are pending
  fs/cifs: Simplify bool comparison.
  fs/cifs: Assign boolean values to a bool variable

Currently the kernel is not correctly updating the numa stats for
NR_FILE_PAGES and NR_SHMEM on THP migration.  Fix that.

For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment
there is no need to handle THP migration as kernel still does not have
write support for file THP but to be more future proof, this patch adds
the THP support for those stats as well.

Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com
Fixes: e71769ae ("mm: enable thp migration for shmem thp")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>