As made explicit by commit 03a283cd ("net/mlx5: Kconfig: Make tc
offload depend on tc skb extension") tc skb extension is required for
offloading tc as well as bridges on switchdev capable ConnectX devices.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Kernel Address Sanitizer uses 3 bits per byte to
encode memory. That is the number of bits the start
and end address of a memory range is shifted right
when the corresponding shadow memory is created for
that memory range.

The used memory mapping routine expects page-aligned
addresses, while the above described 3-bit shift might
turn the shadow memory range start and end boundaries
into non-page-aligned in case the size of the original
memory range is less than (PAGE_SIZE << 3). As result,
the resulting shadow memory range could be short on one
page.

Align on page boundary the start and end addresses when
mapping a shadow memory range and avoid the described
issue in the future.

Note, that does not fix a real problem, since currently
no virtual regions of size less than (PAGE_SIZE << 3)
exist.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Since commit 3b5c3f000c2e ("s390/kasan: move shadow mapping
to decompressor") the decompressor establishes mappings for
the shadow memory and sets initial protection attributes to
RWX. The decompressed kernel resets protection to RW+NX
later on.

In case a shadow memory range is not aligned on page boundary
(e.g. as result of mem= kernel command line parameter use),
the "Checked W+X mappings: FAILED, 1 W+X pages found" warning
hits.
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 557b1970 ("s390/kasan: move shadow mapping to decompressor")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

get_elfcorehdr_size() returns a size_t, so there is no real point to
store it in a u32.

Turn 'alloc_size' into a size_t.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0756118c9058338f3040edb91971d0bfd100027b.1686688212.git.christophe.jaillet@wanadoo.frSigned-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Avoid linker error for randomly generated config file that
has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar
to riscv, x86 and also to commit 4bf3ec38 ("s390: disable
branch profiling for vdso").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

These don't do anything anymore, the only user of the symbol was
VFIO_CCW/AP which already "depends on VFIO" and VFIO itself selects
IOMMU_API.

When this was added VFIO was wrongly doing "depends on IOMMU_API" which
required some contortions like this to ensure IOMMU_API was turned on.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v2-eb322ce2e547+188f-rm_iommu_ccw_jgg@nvidia.comSigned-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Commit f1045056 ("topology/sysfs: rework book and drawer topology
ifdefery") activates the book and drawer topology, previously activated by
CONFIG_SCHED_{BOOK,DRAWER}, dependent on the existence of certain macro
definitions. Hence, since then, CONFIG_SCHED_{BOOK,DRAWER} have no effect
and any further purpose.

Remove the obsolete configs SCHED_{BOOK,DRAWER}.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230508040916.16733-1-lukas.bulwahn@gmail.comSigned-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

pahole says:

	struct compat_statfs64 {
		...
		u32			f_spare[4];		/*    68    16 */
		/* size: 88, cachelines: 1, members: 12 */
		/* padding: 4 */

	struct statfs {
		...
		unsigned int		f_spare[4];		/*    68    16 */
		/* size: 88, cachelines: 1, members: 12 */
		/* padding: 4 */

	struct statfs64 {
		...
		unsigned int		f_spare[4];		/*    68    16 */
		/* size: 88, cachelines: 1, members: 12 */
		/* padding: 4 */

One has to keep the existence of padding in mind when working with
these structs. Grow f_spare arrays to 5 in order to simplify things.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230504144021.808932-3-iii@linux.ibm.comSigned-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective structs
with zeros before filling them and copying them to userspace, like it's
already done for the compat versions of these structs.

Found by KMSAN.

[agordeev@linux.ibm.com: fixed typo in patch description]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20230504144021.808932-2-iii@linux.ibm.comSigned-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Use "a" constraint instead of "d" constraint to pass the state parameter to
the do_sqbs() inline assembly. This prevents that general purpose register
zero is used for the state parameter.

If the compiler would select general purpose register zero this would be
problematic for the used instruction in rsy format: the register used for
the state parameter is a base register. If the base register is general
purpose register zero the contents of the register are unexpectedly ignored
when the instruction is executed.

This only applies to z/VM guests using QIOASSIST with dedicated (pass through)
QDIO-based devices such as FCP [zfcp driver] as well as real OSA or
HiperSockets [qeth driver].

A possible symptom for this case using zfcp is the following repeating kernel
message pattern:

zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred

Each of the qdio problem message can be accompanied by the following entries
for the affected subchannel <sc> in
/sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth:

<sc> ccq: 69....
<sc> SQBS ERROR.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: Steffen Maier <maier@linux.ibm.com>
Fixes: 8129ee16 ("[PATCH] s390: qdio V=V pass-through")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

The pointer to IPL Parameter Information Block is stored
in the absolute lowcore for later use by dump tools. That
pointer is a virtual address, though it should be physical
instead.

Note, this does not fix a real issue, since virtual and
physical addresses are currently the same.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

When SMT thread CPUs are added to CPU masks the nr_cpu_ids
limit is not checked and could be exceeded. This leads to
a warning for example if CONFIG_DEBUG_PER_CPU_MAPS is set
and the command line parameter nr_cpus is set to 1.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Currently when the new channel-path is enabled, we do evaluation only
on the subchannels with a device connected on it. This is because,
in the past, if the device in the subchannel is not working or not
available, we used to unregister the subchannels. But, from the 'commit
2297791c ("s390/cio: dont unregister subchannel from child-drivers")'
we allow subchannels with or without an active device connected
on it. So, when we do the io_subchannel_verify, make sure that,
we are evaluating the subchannels without any device too.

Fixes: 2297791c ("s390/cio: dont unregister subchannel from child-drivers")
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid the extra overhead of
initializing all stack variables by default. Users who want to have that
must change the configuration on their own.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key
material. Zeroize the copies of these keys in kernel memory after
creating the protected key.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Commit 349d03ff ("crypto: s390 - add crypto library interface for
ChaCha20") added a library interface to the s390 specific ChaCha20
implementation. However no check was added to verify if the required
facilities are installed before branching into the assembler code.

If compiled into the kernel, this will lead to the following crash,
if vector instructions are not available:

data exception: 0007 ilc:3 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11
Hardware name: IBM 3931 A01 704 (KVM/Linux)
Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6
           0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780
           0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109
           00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718
Krnl Code: 000000001857276a: c07000b1f80b        larl    %r7,0000000019bb1780
           0000000018572770: a708000a            lhi     %r0,10
          #0000000018572774: e78950000c36        vlm     %v24,%v25,0(%r5),0
          >000000001857277a: e7a060000806        vl      %v26,0(%r6),0
           0000000018572780: e7bf70004c36        vlm     %v27,%v31,0(%r7),4
           0000000018572786: e70b00000456        vlr     %v0,%v27
           000000001857278c: e71800000456        vlr     %v1,%v24
           0000000018572792: e74b00000456        vlr     %v4,%v27
Call Trace:
 [<000000001857277a>] chacha20_vx+0x32/0x818
Last Breaking-Event-Address:
 [<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Fix this by adding a missing MACHINE_HAS_VX check.

Fixes: 349d03ff ("crypto: s390 - add crypto library interface for ChaCha20")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.19+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
[agordeev@linux.ibm.com: remove duplicates in commit message]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Pull compute express link fixes from Dan Williams:

 - Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests

 - Fix leaking kernel memory to a root-only sysfs attribute

* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl: Add missing return to cdat read error path
  tools/testing/cxl: Use DEFINE_STATIC_SRCU()

Pull parisc architecture fixes from Helge Deller:

 - Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag

 - Include reboot.h to avoid gcc-12 compiler warning

* tag 'parisc-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
  parisc: kexec: include reboot.h

Pull ARM fixes from Russell King:

 - fix unwinder for uleb128 case

 - fix kernel-doc warnings for HP Jornada 7xx

 - fix unbalanced stack on vfp success path

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9297/1: vfp: avoid unbalanced stack on 'success' return path
  ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
  ARM: 9295/1: unwind:fix unwind abort for uleb128 case

Pull locking fix from Borislav Petkov:

 - Make sure __down_read_common() is always inlined so that the callers'
   names land in traceevents output and thus the blocked function can be
   identified

* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers

Pull perf fixes from Borislav Petkov:

 - Make sure the PEBS buffer is flushed before reprogramming the
   hardware so that the correct record sizes are used

 - Update the sample size for AMD BRS events

 - Fix a confusion with using the same on-stack struct with different
   events in the event processing path

* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
  perf/x86: Fix missing sample size update on AMD BRS
  perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()

Pull scheduler fix from Borislav Petkov:

 - Fix a couple of kernel-doc warnings

* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: fix cid_lock kernel-doc warnings

Pull x86 fix from Borislav Petkov:

 - Add the required PCI IDs so that the generic SMN accesses provided by
   amd_nb.c work for drivers which switch to them. Add a PCI device ID
   to k10temp's table so that latter is loaded on such systems too

* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hwmon: (k10temp) Add PCI ID for family 19, model 78h
  x86/amd_nb: Add PCI ID for family 19h model 78h

Pull timer fix from Borislav Petkov:

 - Prevent CPU state corruption when an active clockevent broadcast
   device is replaced while the system is already in oneshot mode

* tag 'timers_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Make broadcast device replacement work correctly

Pull ext4 fixes from Ted Ts'o:
 "Some ext4 bug fixes (mostly to address Syzbot reports)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: bail out of ext4_xattr_ibody_get() fails for any reason
  ext4: add bounds checking in get_max_inline_xattr_value_size()
  ext4: add indication of ro vs r/w mounts in the mount message
  ext4: fix deadlock when converting an inline directory in nojournal mode
  ext4: improve error recovery code paths in __ext4_remount()
  ext4: improve error handling from ext4_dirhash()
  ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
  ext4: check iomap type only if ext4_iomap_begin() does not fail
  ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
  ext4: fix data races when using cached status extents
  ext4: avoid deadlock in fs reclaim with page writeback
  ext4: fix invalid free tracking in ext4_xattr_move_to_block()
  ext4: remove a BUG_ON in ext4_mb_release_group_pa()
  ext4: allow ext4_get_group_info() to fail
  ext4: fix lockdep warning when enabling MMP
  ext4: fix WARNING in mb_find_extent

Pull fbdev fixes from Helge Deller:

 - use after free fix in imsttfb (Zheng Wang)

 - fix error handling in arcfb (Zongjie Li)

 - lots of whitespace cleanups (Thomas Zimmermann)

 - add 1920x1080 modedb entry (me)

* tag 'fbdev-for-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: stifb: Fix info entry in sti_struct on error path
  fbdev: modedb: Add 1920x1080 at 60 Hz video mode
  fbdev: imsttfb: Fix use after free bug in imsttfb_probe
  fbdev: vfb: Remove trailing whitespaces
  fbdev: valkyriefb: Remove trailing whitespaces
  fbdev: stifb: Remove trailing whitespaces
  fbdev: sa1100fb: Remove trailing whitespaces
  fbdev: platinumfb: Remove trailing whitespaces
  fbdev: p9100: Remove trailing whitespaces
  fbdev: maxinefb: Remove trailing whitespaces
  fbdev: macfb: Remove trailing whitespaces
  fbdev: hpfb: Remove trailing whitespaces
  fbdev: hgafb: Remove trailing whitespaces
  fbdev: g364fb: Remove trailing whitespaces
  fbdev: controlfb: Remove trailing whitespaces
  fbdev: cg14: Remove trailing whitespaces
  fbdev: atmel_lcdfb: Remove trailing whitespaces
  fbdev: 68328fb: Remove trailing whitespaces
  fbdev: arcfb: Fix error handling in arcfb_probe()

Pull SCSI fix from James Bottomley:
 "A single small fix for the UFS driver to fix a power management
  failure"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix I/O hang that occurs when BKOPS fails in W-LUN suspend

Fix the __swp_offset() and __swp_entry() macros due to commit 6d239fc7
("parisc/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE") which introduced the
SWP_EXCLUSIVE flag by reusing the _PAGE_ACCESSED flag.
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 6d239fc7 ("parisc/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE")
Cc: <stable@vger.kernel.org> # v6.3+

In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.

Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted.  Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.

Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Whether the file system is mounted read-only or read/write is more
important than the quota mode, which we are already printing.  Add the
ro vs r/w indication since this can be helpful in debugging problems
from the console log.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock
by calling ext4_handle_dirty_dirblock() when it already has taken the
directory lock.  There is a similar self-deadlock in
ext4_incvert_inline_data_nolock() for data files which we'll fix at
the same time.

A simple reproducer demonstrating the problem:

    mke2fs -Fq -t ext2 -O inline_data -b 4k /dev/vdc 64
    mount -t ext4 -o dirsync /dev/vdc /vdc
    cd /vdc
    mkdir file0
    cd file0
    touch file0
    touch file1
    attr -s BurnSpaceInEA -V abcde .
    touch supercalifragilisticexpialidocious

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230507021608.1290720-1-tytso@mit.edu
Reported-by: syzbot+91dccab7c64e2850a4e5@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=ba84cc80a9491d65416bc7877e1650c87530fe8aSigned-off-by: Theodore Ts'o <tytso@mit.edu>

If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.

This commit fixes two problem.  The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free.  The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The ext4_dirhash() will *almost* never fail, especially when the hash
tree feature was first introduced.  However, with the addition of
support of encrypted, casefolded file names, that function can most
certainly fail today.

So make sure the callers of ext4_dirhash() properly check for
failures, and reflect the errors back up to their callers.

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-1-tytso@mit.edu
Reported-by: syzbot+394aa8a792cb99dbc837@syzkaller.appspotmail.com
Reported-by: syzbot+344aaa8697ebd232bfc8@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=db56459ea4ac4a676ae4b4678f633e55da005a9bSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When a file system currently mounted read/only is remounted
read/write, if we clear the SB_RDONLY flag too early, before the quota
is initialized, and there is another process/thread constantly
attempting to create a directory, it's possible to trigger the

	WARN_ON_ONCE(dquot_initialize_needed(inode));

in ext4_xattr_block_set(), with the following stack trace:

   WARNING: CPU: 0 PID: 5338 at fs/ext4/xattr.c:2141 ext4_xattr_block_set+0x2ef2/0x3680
   RIP: 0010:ext4_xattr_block_set+0x2ef2/0x3680 fs/ext4/xattr.c:2141
   Call Trace:
    ext4_xattr_set_handle+0xcd4/0x15c0 fs/ext4/xattr.c:2458
    ext4_initxattrs+0xa3/0x110 fs/ext4/xattr_security.c:44
    security_inode_init_security+0x2df/0x3f0 security/security.c:1147
    __ext4_new_inode+0x347e/0x43d0 fs/ext4/ialloc.c:1324
    ext4_mkdir+0x425/0xce0 fs/ext4/namei.c:2992
    vfs_mkdir+0x29d/0x450 fs/namei.c:4038
    do_mkdirat+0x264/0x520 fs/namei.c:4061
    __do_sys_mkdirat fs/namei.c:4076 [inline]
    __se_sys_mkdirat fs/namei.c:4074 [inline]
    __x64_sys_mkdirat+0x89/0xa0 fs/namei.c:4074

Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-1-tytso@mit.edu
Reported-by: syzbot+6385d7d3065524c5ca6d@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=6513f6cb5cd6b5fc9f37e3bb70d273b94be9c34cSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When ext4_iomap_overwrite_begin() calls ext4_iomap_begin() map blocks may
fail for some reason (e.g. memory allocation failure, bare disk write), and
later because "iomap->type ! = IOMAP_MAPPED" triggers WARN_ON(). When ext4
iomap_begin() returns an error, it is normal that the type of iomap->type
may not match the expectation. Therefore, we only determine if iomap->type
is as expected when ext4_iomap_begin() is executed successfully.

Cc: stable@kernel.org
Reported-by: syzbot+08106c4b7d60702dbc14@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/00000000000015760b05f9b4eee9@google.comSigned-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230505132429.714648-1-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When modifying the block device while it is mounted by the filesystem,
syzbot reported the following:

BUG: KASAN: slab-out-of-bounds in crc16+0x206/0x280 lib/crc16.c:58
Read of size 1 at addr ffff888075f5c0a8 by task syz-executor.2/15586

CPU: 1 PID: 15586 Comm: syz-executor.2 Not tainted 6.2.0-rc5-syzkaller-00205-gc9661827 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
 print_address_description+0x74/0x340 mm/kasan/report.c:306
 print_report+0x107/0x1f0 mm/kasan/report.c:417
 kasan_report+0xcd/0x100 mm/kasan/report.c:517
 crc16+0x206/0x280 lib/crc16.c:58
 ext4_group_desc_csum+0x81b/0xb20 fs/ext4/super.c:3187
 ext4_group_desc_csum_set+0x195/0x230 fs/ext4/super.c:3210
 ext4_mb_clear_bb fs/ext4/mballoc.c:6027 [inline]
 ext4_free_blocks+0x191a/0x2810 fs/ext4/mballoc.c:6173
 ext4_remove_blocks fs/ext4/extents.c:2527 [inline]
 ext4_ext_rm_leaf fs/ext4/extents.c:2710 [inline]
 ext4_ext_remove_space+0x24ef/0x46a0 fs/ext4/extents.c:2958
 ext4_ext_truncate+0x177/0x220 fs/ext4/extents.c:4416
 ext4_truncate+0xa6a/0xea0 fs/ext4/inode.c:4342
 ext4_setattr+0x10c8/0x1930 fs/ext4/inode.c:5622
 notify_change+0xe50/0x1100 fs/attr.c:482
 do_truncate+0x200/0x2f0 fs/open.c:65
 handle_truncate fs/namei.c:3216 [inline]
 do_open fs/namei.c:3561 [inline]
 path_openat+0x272b/0x2dd0 fs/namei.c:3714
 do_filp_open+0x264/0x4f0 fs/namei.c:3741
 do_sys_openat2+0x124/0x4e0 fs/open.c:1310
 do_sys_open fs/open.c:1326 [inline]
 __do_sys_creat fs/open.c:1402 [inline]
 __se_sys_creat fs/open.c:1396 [inline]
 __x64_sys_creat+0x11f/0x160 fs/open.c:1396
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f72f8a8c0c9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f72f97e3168 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 00007f72f8bac050 RCX: 00007f72f8a8c0c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000280
RBP: 00007f72f8ae7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd165348bf R14: 00007f72f97e3300 R15: 0000000000022000

Replace
	le16_to_cpu(sbi->s_es->s_desc_size)
with
	sbi->s_desc_size

It reduces ext4's compiled text size, and makes the code more efficient
(we remove an extra indirect reference and a potential byte
swap on big endian systems), and there is no downside. It also avoids the
potential KASAN / syzkaller failure, as a bonus.

Reported-by: syzbot+fc51227e7100c9294894@syzkaller.appspotmail.com
Reported-by: syzbot+8785e41224a3afd04321@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=70d28d11ab14bd7938f3e088365252aa923cff42
Link: https://syzkaller.appspot.com/bug?id=b85721b38583ecc6b5e72ff524c67302abbc30f3
Link: https://lore.kernel.org/all/000000000000ece18705f3b20934@google.com/
Fixes: 717d50e4 ("Ext4: Uninitialized Block Groups")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230504121525.3275886-1-tudor.ambarus@linaro.orgSigned-off-by: Theodore Ts'o <tytso@mit.edu>