This patches fixes a issue but not in the right way as
for_each_oldnew_intel_crtc_in_state() will interate over all CRTCs
not only the crtc passed as parameter, also this two for_each loops
are not necessary and only make code harder to understand.

Proper fix will be discussed in the next patch.

This reverts commit 75f66490.

Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714150755.154985-1-jose.souza@intel.com

Starting with TGL the disabling order of HDMI transcoder clock vs. DDI
BUF has swapped, fix this. There hasn't been any issues seen related to
this, but let's follow the spec.
Reported-by: Sandeep K Lakkakula <sandeep.k.lakkakula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617112807.1586621-1-imre.deak@intel.com

We already disable FBC when PSR2 is enabled on display version 12 and
above; this new workaround now requires that we do the same with PSR1 on
display versions 12 and 13.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708215804.2889246-2-matthew.d.roper@intel.com

Currently PSR is left enabled when all planes are disabled if there
is no attached encoder in new state. This seems to be causing FIFO
underruns.

Fix this by checking if encoder exists in new crtc state and disable
PSR if it doesn't.

v2: Unify disable logic with existing

Cc: Mika Kahola <mika.kahola@intel.com>
Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711111750.881552-1-jouni.hogander@intel.com

We seem to need this W/A same way as for TGL, in order
to fix some of the underruns, which we currently have and
those not related to PSR.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614123049.16183-2-stanislav.lisovskiy@intel.com

JSP is based on ICP and we don't really need to differentiate
between the two. So let's just delcare JSP to be ICP.

The only slight change here is for Wa_14011294188 which we
used to apply for JSP but now we'll only apply to MCC. This
should be fine since the issue being dealt with was introduced
in TGP and inherited into MCC. JSP being derived from ICP
should not need this workaround.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-4-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

MCC is derived from TGP, and we have no real need to
differentiate between the two. Thus remove PCH_MCC and
just declare it to be PCH_TGP compatible.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-3-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

The comments regarding PCH compatibility use long vs.
short names inconsistently. Just use short names always.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-2-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

spelling changes
resoluition -> resolution
dont        -> don't
commmit     -> commit
Invalidade  -> Invalidate
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701203236.1871668-1-trix@redhat.com

Display is turned off by i915_drm_suspend() during the suspend
procedure, removing the last reference of some gem objects that were
used by display.

The issue is that those objects are only actually freed when
mm.free_work executed and that can happen very late in the suspend
process causing issues.
So here draining all freed objects released by display fixing suspend
issues.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629134721.48375-1-jose.souza@intel.com

We've just set up device info in i915_driver_create() so we can use
DISPLAY_VER() intead of looking at match_info directly.

Semantically we want to check the display version instead of the
graphics version, and for the earlier platforms they are always the
same.

v2: Use DISPLAY_VER() instead of GRAPHICS_VER() (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628141005.226252-1-jani.nikula@intel.com

The ddc pin and aux channel sanitization may disable DVI/HDMI and DP,
respectively, of ports parsed earlier, in "last one wins" fashion. With
parsing and printing interleaved, we'll end up logging support first and
disabling later anyway.

Now that we've split ddi port info parsing and printing, take it further
by doing the printing in a separate loop, fixing the logging.

Note that this also changes the logging order from VBT child device
order to port number order.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621123732.1118437-1-jani.nikula@intel.com

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.comSigned-off-by: José Roberto de Souza <jose.souza@intel.com>

This function is supposed to return zero or negative error codes but it
accidentally returns true on failure.

Fixes: 92a02074 ("drm/i915: Split shared dpll .get_dplls() into compute and get phases")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrVcHArNMTGCSy+9@kiliReviewed-by: José Roberto de Souza <jose.souza@intel.com>

The LUTs are a display feature so move the details into
the display portion of the device info.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-10-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

XE_LPD_CURSOR_OFFSETS is a duplicate of TGL_CURSOR_OFFSETS.
Just use the latter.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-9-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Stop hand rolling _MMIO_TRANS2() and just use the real thing.
Note that this register isn't even used atm, hence why this
builds despite the _PIPE2() macro not actually existing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-8-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Stop hand rolling _MMIO_TRANS2() and just use the real thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-7-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

The other similar macros have the _MMIO prefix, so give
it also to _CURSOR2.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-6-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Using a signed type for the register offsets doesn't really
make sense. Switch to u32.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-5-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

The display register offsets are display stuff so stick
into the display portion of the device info.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-4-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

The display register offsets are display stuff so stick
into the display portion of the device info.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-3-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

DBUF is a display thing, so move it into the display
portion of the device info.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-2-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Eliminate the PIPECONF RMWs from .comit_commit() so
that we can finally declare the whole vblank evade part
(and the noarm() part) of the pipe commit free of register
reads. Or at least I hope that's the last read...

Only the i9xx/ilk codepaths need this for now, but let's
add the same thing for hsw+ just in case we want to start
calling that during fastsets at some point (eg. to change
dithering settings/etc.).

Should open up the way to start experimenting with
different DSB usage approaches for pipe commits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413192607.27533-1-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>

Currently i915 disables d3cold for i915 pci dev.
This blocks D3 for i915 gfx pci upstream bridge (VSP).
Let's disable d3cold at gfx root port to make sure that
i915 gfx VSP can transition to D3 to save some power.

We don't need to disable/enable d3cold in rpm, s2idle
suspend/resume handlers. Disabling/Enabling d3cold at
gfx root port in probe/remove phase is sufficient.

Fixes: 1a085e23 ("drm/i915: Disable D3Cold in s2idle and runtime pm")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: : Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616122249.5007-1-anshuman.gupta@intel.com

When the last reference of a gem object is removed it is added to the
mm.free_list list and mm.free_work is queued to actually free the
object.

So gem objects that had their last reference removed by display during
drm_atomic_helper_shutdown() are added to mm.free_list what could
cause that mm.free_work is executed at the same time as
intel_runtime_pm_driver_release() causing raw-wakerefs warning.

So here only calling i915_gem_suspend() and by consequence
i915_gem_drain_freed_objects() only after display is down making
sure all display gem objecs are freed when
intel_runtime_pm_driver_release() is executed.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617190629.355356-1-jose.souza@intel.com

Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.

v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com

Pass struct drm_i915_private * instead of struct drm_device *, and
rename dev_priv to i915.

v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-2-jani.nikula@intel.com

Split out the modeset hardware state readout and sanitize, or state
setup, to a separate file.

Do some drive-by checkpatch fixes while at it.

v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-1-jani.nikula@intel.com

This reverts commit 73867c87 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.

Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.

Bisection traced it back to this commit, which makes sense given the
issues.

Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.

Fixes: 73867c87 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com

Prefer struct drm_i915_private *i915 over struct drm_device or dev_priv.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1bb84c4fffde5025ddc411148d529381a587e1e1.1655372759.git.jani.nikula@intel.com

Rename dev_priv to i915 in crtc state dumping code.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c1dafd45757d2de2e3f8404674168f2b1241170.1655372759.git.jani.nikula@intel.com

Add the brackets [] around crtc state dump context string in
intel_crtc_state_dump() so the callers don't have to.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7d671279fb7d99eaf882bcb88c5c1d653755fb1.1655372759.git.jani.nikula@intel.com

Declutter intel_display.c by splitting out crtc state dumping to a
separate file.

v2: intel_pipe_config_dump -> intel_crtc_state_dump
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f72a5626473692910263671af91e02251ed87eea.1655372759.git.jani.nikula@intel.com

Add new file intel_modeset_verify.c for high level modeset verification
code to declutter intel_display.h. The new file is supposed to be about
crtc/encoder/connector verification; the state verification for very
specific functionality such as plls or wm should be placed next to the
code it verifies.

Fix some minor checkpatch issues while at it.

v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9b47c14316a9edb772a8b8f934eabe7e928dd76.1655372759.git.jani.nikula@intel.com

Keep the mpllb implementation details together in intel_snps_phy.c. Also
declutter intel_display.c.

v2: intel_mpllb_verify_state -> void intel_mpllb_state_verify (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7340bb0e399aeb2676c4820461187eeb1d4db15.1655372759.git.jani.nikula@intel.com

The pipe_config_mismatch() function is primarily for logging comparison
results.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/167e54e13a9a41c944910a274e79cbfd39d963b1.1655372759.git.jani.nikula@intel.com

Keep the shared dpll implementation details together by moving the dpll
state verification to intel_dpll_mgr.c. Also declutter intel_display.c.

v2: intel_shared_dpll_verify_state -> intel_shared_dpll_state_verify (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85b02186f1269dd374d11db35900130547a5f2c6.1655372759.git.jani.nikula@intel.com

By moving wm state verification to intel_pm.c, we can make a bunch of
functions static, hiding the wm details better. Also declutter
intel_display.c.

v2: intel_wm_state_verify -> intel_wm_verify_state (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2a7e3141e87181c07eaddcd9c352b8810550b0ce.1655372759.git.jani.nikula@intel.com

adl-s needs the combo PLL DCO fraction w/a as well.
Gets us slightly more accurate clock out of the PLL.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613201439.23341-1-ville.syrjala@linux.intel.comReviewed-by: Matt Roper <matthew.d.roper@intel.com>