When building mips tinyconfig with clang the following error show up:

WARNING: modpost: vmlinux.o(.text+0x1940c): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson3_sc_init()
The function r4k_cache_init() references
the function __init loongson3_sc_init().
This is often because r4k_cache_init lacks a __init
annotation or the annotation of loongson3_sc_init is wrong.

Remove marked __init from function loongson3_sc_init(),
mips_sc_probe_cm3(), and mips_sc_probe().
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The entries for JZ47xx SoCs and its drivers lacked MIPS mailing list.
Only MTD NAND driver pointed linux-mtd.  Add linux-mips so the relevant
patches will get attention of MIPS developers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The entry for MIPS Ingenic JZ4780 DMA driver is not up to date anymore.
Zubair Lutfullah Kakakhel's email bounces and no maintenance is
provided.
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Use @kernel.org address as the main communications end point. Update the
corresponding M-entries and .mailmap (for git shortlog translation).
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Allocate the IRQ descriptors where necessary before configuring them via
irq_set_chip_and_handler(). Fixes the following soft lockup:

watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [modprobe:72]
Modules linked in:
irq event stamp: 33288
hardirqs last  enabled at (33287): [<ffffffff8012e680>] restore_partial+0x74/0x150
hardirqs last disabled at (33288): [<ffffffff8012e9e8>] handle_int+0x128/0x178
softirqs last  enabled at (33284): [<ffffffff80859c4c>] __do_softirq+0x5c4/0x6d0
softirqs last disabled at (33279): [<ffffffff80164018>] irq_exit+0xe8/0xf0
CPU: 5 PID: 72 Comm: modprobe Not tainted 4.19.80-... #1
$ 0   : 0000000000000000 0000000000000001 0000000000000003 8000000002bdc640
$ 4   : 0000000000000000 0000000000000000 0000000000000000 0000000000000000
$ 8   : 0000000000000001 0000000000000001 0000000000000000 ffffffff803076cc
$12   : 0000000000000000 0000000000000000 ffffffff817f0000 0000000008000000
$16   : ffffffff80a96d10 ffffffff80a90000 8000000002c41780 8000000002c41788
$20   : 0000000000000001 ffffffff8013b248 800000008ef28080 ffffffff80bb8700
$24   : 0000000003bf0000 ffffffff802d0610
$28   : 800000008ef20000 800000008ef23bd0 0000000000000006 ffffffff8020d6f8
Hi    : 0000000000000160
Lo    : 0000000000000014
epc   : ffffffff8020d72c smp_call_function_many+0x2f4/0x370
ra    : ffffffff8020d6f8 smp_call_function_many+0x2c0/0x370
Status: 10008ce3 KX SX UX KERNEL EXL IE
Cause : 40808000 (ExcCode 00)
PrId  : 000d900a (Cavium Octeon II)
CPU: 5 PID: 72 Comm: modprobe Not tainted 4.19.80-... #1
Stack : ffffffff80ab0000 00000051801c0da0 0000000010000ce0 5e70a8a65518aeac
        5e70a8a65518aeac 0000000000000000 800000008e0cfb48 ffffffff81820000
        800000008e0cfad4 00000000f0ce6f64 0000000000000001 0000000000000000
        ffffffff801ccfb8 0000000000000000 0000000000000000 ffffffff817f0000
        800000008531d840 ffffffff80a90000 fffe000000000000 0000000000000000
        ffffffff80b20000 ffffffffffffffff ffffffff80bb3980 ffffffff80bb3980
        ffffffff80a90000 00000000fffffffe ffffffff8057a760 0000000000000028
        ffffffff80c50028 800000008ef20000 800000008e0cfb40 ffffffff80b20000
        ffffffff80835d6c 0000000000000000 800000008e0cfc78 5e70a8a65518aeac
        ffffffff80a9dbf7 ffffffff80835c2c ffffffff801357a4 ffffffff809bdd50
        ...
Call Trace:
[<ffffffff801357a4>] show_stack+0x9c/0x130
[<ffffffff80835d6c>] dump_stack+0xdc/0x140
[<ffffffff8023d490>] watchdog_timer_fn+0x3e8/0x478
[<ffffffff801f43e4>] __hrtimer_run_queues+0x18c/0x6d8
[<ffffffff801f507c>] hrtimer_interrupt+0x104/0x2e8
[<ffffffff801391a8>] c0_compare_interrupt+0x60/0x90
[<ffffffff801d0fcc>] __handle_irq_event_percpu+0xb4/0x4a0
[<ffffffff801d13ec>] handle_irq_event_percpu+0x34/0x90
[<ffffffff801d6b24>] handle_percpu_irq+0x9c/0xe0
[<ffffffff801d01f4>] generic_handle_irq+0x34/0x50
[<ffffffff80859678>] do_IRQ+0x18/0x28
[<ffffffff80107548>] plat_irq_dispatch+0x90/0x128
[<ffffffff8012ea2c>] handle_int+0x16c/0x178
[<ffffffff8020d72c>] smp_call_function_many+0x2f4/0x370
[<ffffffff8020d7e8>] smp_call_function+0x40/0xa0
[<ffffffff8013bc1c>] flush_tlb_mm+0x44/0x140
[<ffffffff802d50b0>] tlb_flush_mmu+0x38/0x90
[<ffffffff802d5154>] arch_tlb_finish_mmu+0x4c/0x88
[<ffffffff802d52bc>] tlb_finish_mmu+0x24/0x50
[<ffffffff802e0c54>] exit_mmap+0x11c/0x1b8
[<ffffffff80157bb4>] mmput+0x84/0x138
[<ffffffff80160ad4>] do_exit+0x314/0xc88
[<ffffffff801628e0>] do_group_exit+0x48/0xb0
[<ffffffff80162958>] __wake_up_parent+0x0/0x18
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

There are still some drivers using PAGE_SHARED constant so put it back.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In the current code, CONFIG_ARCH_KEEP_MEMBLOCK is not set for MIPS arch,
memblock_discard() will discard memory and reserved arrays if they were
allocated, select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to give a chance to
track "memory" and "reserved" memblocks after early boot, with this patch,
we can see the following two sysfs interfaces under DEBUG_FS.

/sys/kernel/debug/memblock/memory
/sys/kernel/debug/memblock/reserved
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

When building mips tinyconfig with clang the following warning show up:

arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
        if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
            ^~
arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning
        register long sp __asm__("$sp");
                        ^
                         = 0
1 warning generated.

Rework to make an explicit inline move, instead of the non-standard use
of specifying registers for local variables. This is what's written
from the gcc-10 manual [1] about specifying registers for local
variables:

"6.47.5.2 Specifying Registers for Local Variables
.................................................
[...]

"The only supported use for this feature is to specify registers for
input and output operands when calling Extended 'asm' (*note Extended
Asm::).  [...]".

[1] https://docs.w3cub.com/gcc~10/local-register-variablesSigned-off-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The node names for devices using the pwm-leds driver follow a certain
naming scheme (now).  Parent node name is not enforced, but recommended
by DT project.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Most platforms do not need to do synci instruction operations when
synci_step is 0. But for example, the synci implementation on Loongson64
platform has some changes. On the one hand, it ensures that the memory
access instructions have been completed. On the other hand, it guarantees
that all prefetch instructions need to be fetched again. And its address
information is useless. Thus, only one synci operation is required when
synci_step is 0 on Loongson64 platform. I guess that some other platforms
have similar implementations on synci, so add judgment conditions in
`while` to ensure that at least all platforms perform synci operations
once. For those platforms that do not need synci, they just do one more
operation similar to nop.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In order to get more memblock configuration with memblock=debug in the boot
cmdline, move memblock_dump_all() to the end of setup_arch(), this can help
us to get dmi_setup() and resource_init() memblock info, at least for now.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Currently we won't migrate irqs when offline CPUs, which has been
implemented on most architectures. That will lead to some devices work
incorrectly if the bound cores are offline.

While that can be easily supported by enabling GENERIC_IRQ_MIGRATION.
But i don't pretty known the reason it was not supported on all MIPS
platforms.

This patch add the support for irq migration on MIPS CPS platform, and
it's tested on the interAptiv processor.
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Because check_kernel_sections_mem() does exactly this for all platforms.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Linux doesn't own the memory immediately after the kernel image. On Octeon
bootloader places a shared structure right close after the kernel _end,
refer to "struct cvmx_bootinfo *octeon_bootinfo" in cavium-octeon/setup.c.

If check_kernel_sections_mem() rounds the PFNs up, first memblock_alloc()
inside early_init_dt_alloc_memory_arch() <= device_tree_init() returns
memory block overlapping with the above octeon_bootinfo structure, which
is being overwritten afterwards.

Fixes: a94e4f24 ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Enable gcov profiling of the entire kernel on mips. Required changes
include disabling profiling for:

* arch/kernel/boot/compressed: not linked to main kernel.

Lightly tested on Loongson 3A3000 an 3A4000, seems to work as expected.

without "GCOV_PROFILE := n" in compressed Makefile,
build errors as follows:
...
ld: arch/mips/boot/compressed/string.o:(.data+0x88):
 undefined reference to `__gcov_merge_add'
ld: arch/mips/boot/compressed/string.o:
 in function `_GLOBAL__sub_I_00100_0_memcpy':
string.c:(.text.startup+0x4): undefined reference to `__gcov_init'
ld: arch/mips/boot/compressed/string.o:
 in function `_GLOBAL__sub_D_00100_1_memcpy':
string.c:(.text.exit+0x0): undefined reference to `__gcov_exit'
...
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Commit 7ecdea4a ("backlight: generic_bl: Remove this driver as it is
unused") removed geenric_bl driver from the tree, together with
corresponding config option.

Remove BACKLIGHT_GENERIC config item from all MIPS configurations.

Fixes: 7ecdea4a ("backlight: generic_bl: Remove this driver as it is unused")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Reserve memory from &_text to &_end. Otherwise if kernel address
was modified, the memory range of start_pfn to kernel_start_pfn
would be reserved. Then we could not use this range.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Function is_aligned_hugepage_range is no longer needed.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

After commit 9cce844a ("MIPS: CPU#0 is not hotpluggable"),
c->hotpluggable is 0 for CPU 0 and it will not generate a control
file in sysfs for this CPU:

[root@linux loongson]# cat /sys/devices/system/cpu/cpu0/online
cat: /sys/devices/system/cpu/cpu0/online: No such file or directory
[root@linux loongson]# echo 0 > /sys/devices/system/cpu/cpu0/online
bash: /sys/devices/system/cpu/cpu0/online: Permission denied

So no need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable(),
just remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

kfree(dev) has been called inside put_device so anther
kfree would cause a use-after-free bug/

Fixes: 8286ae03 ("MIPS: Add CDMM bus support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Provide a weak plat_get_fdt() in relocate.c in case some platform enable
USE_OF while plat_get_fdt() is useless.

1MB RELOCATION_TABLE_SIZE is small for Loongson64 because too many
instructions should be relocated. 2MB is enough in present.

Add KASLR support for Loongson64.

KASLR(kernel address space layout randomization)

To enable KASLR on Loongson64:
First, make loongson3_defconfig.
Then, enable CONFIG_RELOCATABLE and CONFIG_RANDOMIZE_BASE.
Finally, compile the kernel.

To test KASLR on Loongson64:
Start machine with KASLR kernel.

The first time:
# cat /proc/iomem
00200000-0effffff : System RAM
  02f30000-03895e9f : Kernel code
  03895ea0-03bc7fff : Kernel data
  03e30000-04f43f7f : Kernel bss

The second time:
# cat /proc/iomem
00200000-0effffff : System RAM
  022f0000-02c55e9f : Kernel code
  02c55ea0-02f87fff : Kernel data
  031f0000-04303f7f : Kernel bss

We see that code, data and bss sections become randomize.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Apply_r_mips_26_rel() relocates instructions like j, jal and etc. These
instructions consist of 6bits function field and 26bits address field.
The value of target_addr as follows,
=================================================================
|     high 4bits           |            low 28bits              |
=================================================================
|the high 4bits of this PC | the low 26bits of instructions << 2|
=================================================================
Thus, loc_orig and log_new both need high 4bits rather than high 6bits.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

As the user manual and code comment said, Loongson-3 has 4-scache banks,
while Loongson-2K has only 2 banks, so we should multiply the number of
scache banks, this multiply operation should be done by c->scache.sets
instead of scache_size, otherwise we will get the wrong scache size when
execute lscpu. For example, the scache size should be 8192K instead of
2048K on the Loongson 3A3000 and 3A4000 platform, we can see the related
info in the following boot message:

[loongson@linux ~]$ dmesg | grep "Unified secondary cache"
[    0.000000] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[    4.061909] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[    4.125629] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[    4.188379] Unified secondary cache 8192kB 16-way, linesize 64 bytes.

E.g. without this patch:

[loongson@linux ~]$ cat /sys/devices/system/cpu/cpu*/cache/index2/size
2048K
2048K
2048K
2048K
[loongson@linux ~]$ lscpu | grep "L2 cache"
L2 cache:              2048K

With this patch:

[loongson@linux ~]$ cat /sys/devices/system/cpu/cpu*/cache/index2/size
8192K
8192K
8192K
8192K
[loongson@linux ~]$ lscpu | grep "L2 cache"
L2 cache:              8192K
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Since commit 02cf2119 ("Cleanup the mess in cpu_cache_init."),
cpu_has_6k_cache and cpu_has_8k_cache have no user, r6k_cache_init()
and r8k_cache_init() are not defined for over 15 years, just remove
them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Protection map difference between RIXI and non RIXI cpus is _PAGE_NO_EXEC
and _PAGE_NO_READ usage. Both already take care of cpu_has_rixi while
setting up the page bits. So we just need one setup of protection map
and can drop the now unused (and broken for RIXI) PAGE_* defines.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Introduce helper macro to make lines shorter.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS protection bits are setup during runtime so using defines like
PAGE_SHARED ignores this runtime changes. Using vm_get_page_prot
to get correct page protection fixes this.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS protection bits are setup during runtime so using defines like
PAGE_READONLY ignores these runtime changes. To fix this we simply
use the page protection of the setup vma.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

BCM6318 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <F.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

BCM63268 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

BCM6368 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

BCM6362 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

BCM6358 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

BCM6328 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Add support for resetting blocks through the Linux reset controller
subsystem for BCM63xx SoCs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <F.fainelli@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Add device tree binding documentation for BCM6345 reset controller.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This allows to add reset controllers support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

1.Refresh defconfig of CI20 to support OTG and RNG.
2.Refresh defconfig of CU1000-Neo to support OTG/RNG/OST/SC16IS752.
3.Refresh defconfig of CU1830-Neo to support OTG/DTRNG/OST/SC16IS752.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

1.Add OTG/OTG PHY/RNG nodes for JZ4780, CGU/OTG nodes for CI20.
2.Add OTG/OTG PHY/RNG/OST nodes for X1000, SSI/CGU/OST/OTG/SC16IS752
  nodes for CU1000-Neo.
3.Add OTG/OTG PHY/DTRNG/OST nodes for X1830, SSI/CGU/OST/OTG/SC16IS752
  nodes for CU1830-Neo.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull in mips-fixes to get memblock fix.

- fix bug preventing booting on several platforms
- fix for build error, when modules need has_transparent_hugepage
- fix for memleak in alchemy clk setup
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>