- 20 Mar, 2024 31 commits
-
-
Le Ma authored
To fix the entity rq NULL issue. This setting has been moved to upper level. Fixes: b7043800 ("drm/amdgpu: move buffer funcs setting up a level") Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Leo Ma authored
[Why] When mode switching is triggered there is momentary noise visible on some HDMI TV or displays. [How] Wait for 2 frames to make sure we have enough time to send out AV mute and sink receives a full frame. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Leo Ma <hanghong.ma@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Wenjing Liu authored
This reverts commit 340383c7 ("drm/amd/display: Remove pixle rate limit for subvp") [why] The original commit causes a regression when subvp is applied on ODM required 8k60hz timing. The display shows black screen on boot. The issue can be recovered with hotplug. It also causes MPO to fail. We will temprarily revert this commit and investigate the root cause further. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
-
Lang Yu authored
Ready now. Remove this workaround. This reverts commit d40f6213. Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Tested-by:
Alan Liu <haoping.liu@amd.com> Acked-by:
-
Ma Jun authored
This patch causes the following iounmap erorr and calltrace iounmap: bad address 00000000d0b3631f The original patch was unjustified because amdgpu_device_fini_sw() will always cleanup the rmmio mapping. This reverts commit eb4f1398. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Suggested-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Allen Pan authored
[How] Check wheather state is NULL before releasing it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Allen Pan <allen.pan@amd.com> Tested-by:
-
Rodrigo Siqueira authored
[WHY & HOW] If the display is null when creating an HDCP session, return a proper error code. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
-
Wenjing Liu authored
[WHY] Odm update is doubled buffered. We need to wait for ODM update to be completed before optimizing bandwidth or programming new udpates. [HOW] implement wait_for_odm_update_pending_complete function to wait for: 1. odm configuration update is no longer pending in timing generator. 2. no pending dpg pattern update for each active OPP. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
-
Wenjing Liu authored
[WHY] On DCN32 we support dynamic ODM even when OTG is blanked. When ODM configuration is dynamically changed and the OTG is on blank pattern, we will need to reprogram OPP's test pattern based on new ODM configuration. Therefore we need to lock the OTG pipe to avoid temporary corruption when we are reprogramming OPP blank patterns. [HOW] Add a new interdependent update lock implementation to lock all enabled OTG pipes even when there is no plane on the OTG for DCN32. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
ChunTao Tso authored
[WHY] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [HOW] Amend coasting vtotal from 2 bytes to 4 bytes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
ChunTao Tso <chuntao.tso@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[WHY] We still had an instance of get_idle_state checking the PMFW scratch register instead of the actual idle allow signal. [HOW] Replace it with the SW state check for whether we had allowed idle through notify_idle. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Wenjing Liu authored
[WHY] When committing an update with ODM combine change when the plane is removing or already removed, we fail to detect odm change in pipe update flags. This has caused mismatch between new dc state and the actual hardware state, because we missed odm programming. [HOW] - Detect odm change even for otg master pipe without a plane. - Update odm config before calling program pipes for pipe with planes. The commit also updates blank pattern programming when odm is changed without plane. This is because number of OPP is changed when ODM combine is changed. Blank pattern is per OPP so we will need to reprogram OPP based on the new pipe topology. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Acked-by:
-
Dillon Varone authored
[WHY & HOW] DPPCLK ranges should be obtained from the SMU when available. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Ryan Lin authored
[WHY] Some eDP panels' ext caps don't write initial values. The value of dpcd_addr (0x317) can be random and the backlight control interface will be incorrect. [HOW] Add new panel patches to remove sink ext caps. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.5.x Cc: Tsung-hua Lin <tsung-hua.lin@amd.com> Cc: Chris Chi <moukong.chi@amd.com> Reviewed-by:
Ryan Lin <tsung-hua.lin@amd.com> Tested-by:
-
Josip Pavic authored
[WHY] It's beneficial for ABM to know when new frame data are available. [HOW] Add new condition to allow dirty rects to be sent to DMUB when ABM is active. ABM will use this as a signal that a new frame has arrived. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Anthony Koo <anthony.koo@amd.com> Acked-by:
Josip Pavic <josip.pavic@amd.com> Tested-by:
-
Sohaib Nadeem authored
[WHY]: Increasing min DCFCLK addresses underflow issues that occur when phantom pipe is turned on for some Sub-Viewport configs [HOW]: dcn32_override_min_req_dcfclk is added to override DCFCLK value in dml1_validate when subviewport is being used. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by:
-
Hawking Zhang authored
Do not load/invoke display TA if display hardware is not available. Signed-off-by:
-
Prike Liang authored
Fix the KGQ fallback function name, as this will help differentiate the failure in the KCQ enablement. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
-
Ma Jun authored
Check the validity of overdriver power limit before using it. Fixes: 7968e974 ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by:
Lazar Lijo <lijo.lazar@amd.com> Suggested-by:
-
Ma Jun authored
Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL. Fixes: 7968e974 ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by:
Yin Zhenguo <zhenguo.yin@amd.com> Suggested-by:
-
ZhenGuo Yin authored
[Why] RLCG interface returns "out-of-range" error under SRIOV VF when accessing PF-only registers. [How] Skip access PF-only registers on gfx10/gfxhub2_1 under SRIOV. Acked-by:
-
Ahmad Rehman authored
In passthrough environment, when amdgpu is reloaded after unload, mode-1 is triggered after initializing the necessary IPs, That init does not include KFD, and KFD init waits until the reset is completed. KFD init is called in the reset handler, but in this case, the zone device and drm client is not initialized, causing app to create kernel panic. v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create. As the previous version has the potential of creating DRM client twice. v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA before SDMA init. Adding the condition to in drm client creation, on top of v1, to guard against drm client creation call multiple times. Signed-off-by:
Ahmad Rehman <Ahmad.Rehman@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Philip Yang authored
Otherwise after the GTT bo is released, the GTT and gart space is freed but amdgpu_ttm_backend_unbind will not clear the gart page table entry and leave valid mapping entry pointing to the stale system page. Then if GPU access the gart address mistakely, it will read undefined value instead page fault, harder to debug and reproduce the real issue. Cc: stable@vger.kernel.org Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Saleemkhan Jamadar authored
v1 - update the fw header for each vcn instance (Veera) VCN1 has different FW binary in VCN v4_0_6. Add changes to load the VCN1 fw binary Signed-off-by:
Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by:
Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[WHY & HOW] Enable DML2 related debug config options in DM for testing purposes. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Swapnil Patel authored
[WHY & HOW] Currently, to map dc states into dml_display_cfg, We create a dummy plane if the stream doesn't have any planes attached to it. This dummy plane uses max addersable width height. This results in certain mode validations failing when they shouldn't. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Swapnil Patel <swapnil.patel@amd.com> Tested-by:
-
Friedrich Vock authored
IH 7.0 support landed shortly after the original patch for resetting the bit on all other generations, but without that patch applied. Fixes: 12443fc5 ("drm/amdgpu: Add ih v7_0 ip block support") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Friedrich Vock <friedrich.vock@gmx.de> Reviewed-by:
-
Lang Yu authored
Properly handle cid 0x140. Fixes: aba2be41 ("drm/amdgpu: add mmhub 3.3.0 support") Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
Vitaly Prosyak authored
The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl to the AMDGPU DRM driver on any ASICs with an invalid address and size. The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>. For example the following code: static void Syzkaller1(int fd) { struct drm_amdgpu_gem_userptr arg; int ret; arg.addr = 0xffffffffffff0000; arg.size = 0x80000000; /*2 Gb*/ arg.flags = 0x7; ret = drmIoctl(fd, 0xc1186451/*amdgpu_gem_userptr_ioctl*/, &arg); } Due to the address and size are not valid there is a failure in amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert-> check_shl_overflow, but we even the amdgpu_hmm_register failure we still call amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address. The following stack is below when the issue is reproduced when Kazan is enabled: [ +0.000014] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000009] RIP: 0010:mmu_interval_notifier_remove+0x327/0x340 [ +0.000017] Code: ff ff 49 89 44 24 08 48 b8 00 01 00 00 00 00 ad de 4c 89 f7 49 89 47 40 48 83 c0 22 49 89 47 48 e8 ce d1 2d 01 e9 32 ff ff ff <0f> 0b e9 16 ff ff ff 4c 89 ef e8 fa 14 b3 ff e9 36 ff ff ff e8 80 [ +0.000014] RSP: 0018:ffffc90002657988 EFLAGS: 00010246 [ +0.000013] RAX: 0000000000000000 RBX: 1ffff920004caf35 RCX: ffffffff8160565b [ +0.000011] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8881a9f78260 [ +0.000010] RBP: ffffc90002657a70 R08: 0000000000000001 R09: fffff520004caf25 [ +0.000010] R10: 0000000000000003 R11: ffffffff8161d1d6 R12: ffff88810e988c00 [ +0.000010] R13: ffff888126fb5a00 R14: ffff88810e988c0c R15: ffff8881a9f78260 [ +0.000011] FS: 00007ff9ec848540(0000) GS:ffff8883cc880000(0000) knlGS:0000000000000000 [ +0.000012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000010] CR2: 000055b3f7e14328 CR3: 00000001b5770000 CR4: 0000000000350ef0 [ +0.000010] Call Trace: [ +0.000006] <TASK> [ +0.000007] ? show_regs+0x6a/0x80 [ +0.000018] ? __warn+0xa5/0x1b0 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000018] ? report_bug+0x24a/0x290 [ +0.000022] ? handle_bug+0x46/0x90 [ +0.000015] ? exc_invalid_op+0x19/0x50 [ +0.000016] ? asm_exc_invalid_op+0x1b/0x20 [ +0.000017] ? kasan_save_stack+0x26/0x50 [ +0.000017] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000020] ? __pfx_mmu_interval_notifier_remove+0x10/0x10 [ +0.000017] ? kasan_save_alloc_info+0x1e/0x30 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __kasan_kmalloc+0xb1/0xc0 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_read+0x11/0x20 [ +0.000020] amdgpu_hmm_unregister+0x34/0x50 [amdgpu] [ +0.004695] amdgpu_gem_object_free+0x66/0xa0 [amdgpu] [ +0.004534] ? __pfx_amdgpu_gem_object_free+0x10/0x10 [amdgpu] [ +0.004291] ? do_syscall_64+0x5f/0xe0 [ +0.000023] ? srso_return_thunk+0x5/0x5f [ +0.000017] drm_gem_object_free+0x3b/0x50 [drm] [ +0.000489] amdgpu_gem_userptr_ioctl+0x306/0x500 [amdgpu] [ +0.004295] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004270] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __this_cpu_preempt_check+0x13/0x20 [ +0.000015] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ +0.000022] ? drm_ioctl_kernel+0x17b/0x1f0 [drm] [ +0.000496] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004272] ? drm_ioctl_kernel+0x190/0x1f0 [drm] [ +0.000492] drm_ioctl_kernel+0x140/0x1f0 [drm] [ +0.000497] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004297] ? __pfx_drm_ioctl_kernel+0x10/0x10 [drm] [ +0.000489] ? srso_return_thunk+0x5/0x5f [ +0.000011] ? __kasan_check_write+0x14/0x20 [ +0.000016] drm_ioctl+0x3da/0x730 [drm] [ +0.000475] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004293] ? __pfx_drm_ioctl+0x10/0x10 [drm] [ +0.000506] ? __pfx_rpm_resume+0x10/0x10 [ +0.000016] ? srso_return_thunk+0x5/0x5f [ +0.000011] ? __kasan_check_write+0x14/0x20 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000011] ? _raw_spin_lock_irqsave+0x99/0x100 [ +0.000015] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000014] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000011] ? srso_return_thunk+0x5/0x5f [ +0.000011] ? preempt_count_sub+0x18/0xc0 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000010] ? _raw_spin_unlock_irqrestore+0x27/0x50 [ +0.000019] amdgpu_drm_ioctl+0x7e/0xe0 [amdgpu] [ +0.004272] __x64_sys_ioctl+0xcd/0x110 [ +0.000020] do_syscall_64+0x5f/0xe0 [ +0.000021] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000015] RIP: 0033:0x7ff9ed31a94f [ +0.000012] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ +0.000013] RSP: 002b:00007fff25f66790 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ +0.000016] RAX: ffffffffffffffda RBX: 000055b3f7e133e0 RCX: 00007ff9ed31a94f [ +0.000012] RDX: 000055b3f7e133e0 RSI: 00000000c1186451 RDI: 0000000000000003 [ +0.000010] RBP: 00000000c1186451 R08: 0000000000000000 R09: 0000000000000000 [ +0.000009] R10: 0000000000000008 R11: 0000000000000246 R12: 00007fff25f66ca8 [ +0.000009] R13: 0000000000000003 R14: 000055b3f7021ba8 R15: 00007ff9ed7af040 [ +0.000024] </TASK> [ +0.000007] ---[ end trace 0000000000000000 ]--- v2: Consolidate any error handling into amdgpu_hmm_register which applied to kfd_bo also. (Christian) v3: Improve syntax and comment (Christian) Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Joonkyo Jung <joonkyoj@yonsei.ac.kr> Cc: Dokyung Song <dokyungs@yonsei.ac.kr> Cc: <jisoo.jang@yonsei.ac.kr> Cc: <yw9865@yonsei.ac.kr> Signed-off-by:Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by:
-
Mukul Joshi authored
In certain situations, some apps can import a BO multiple times (through IPC for example). To restore such processes successfully, we need to tell drm to ignore duplicate BOs. While at it, also add additional logging to prevent silent failures when process restore fails. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Mario Limonciello authored
The monitor shipped with the Framework 16 supports VRR [1], but it's not being advertised. This is because the detailed timing block doesn't contain `EDID_DETAIL_MONITOR_RANGE` which amdgpu looks for to find min and max frequencies. This check however is superfluous for this case because update_display_info() calls drm_get_monitor_range() to get these ranges already. So if the `DRM_EDID_FEATURE_CONTINUOUS_FREQ` EDID feature is found then turn on freesync without extra checks. v2: squash in fix from Harry Closes: https://www.reddit.com/r/framework/comments/1b4y2i5/no_variable_refresh_rate_on_the_framework_16_on/ Closes: https://www.reddit.com/r/framework/comments/1b6vzcy/framework_16_variable_refresh_rate/ Closes: https://community.frame.work/t/resolved-no-vrr-freesync-with-amd-version/42338 Link: https://gist.github.com/superm1/e8fbacfa4d0f53150231d3a3e0a13fafSigned-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
- 11 Mar, 2024 1 commit
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-6.9-2024-03-08-1' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-03-08-1: amdgpu: - DCN 3.5.1 support - Fixes for IOMMUv2 removal - UAF fix - Misc small fixes and cleanups - SR-IOV fixes - MCBP cleanup - devcoredump update - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Misc fixes and cleanups - GFX10.1 trap fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240308170741.3691166-1-alexander.deucher@amd.com
-
- 08 Mar, 2024 5 commits
-
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
Late updates for v6.9, the main part is CDM (YUV over DP) which was waiting for drm-misc-next-2024-02-29. DPU: - Add support for YUV420 over DP - Patchset to ease debugging of vblank timeouts - Small cleanup Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
- various code cleanups - enhancements for NPU and MRT support Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-xe-next-fixes-2024-03-04' of ssh://gitlab.freedesktop.org/drm/xe/kernel into drm-next Driver Changes: - Fix kunit link failure with built-in xe - Fix one more 32-bit build failure with ARM compiler - Fix initialization order of topology struct - Cleanup unused fields in struct xe_vm - Fix xe_vm leak when handling page fault on a VM not in fault mode - Drop use of "grouped target" feature in Makefile since that's only available in make >= 4.3 Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2024-03-07' of https://anongit.freedesktop.org/git/drm/drm-misc into drm-next Short summary of fixes pull: - i915: Fix applying placement flags - fbdev: Fix build on PowerMacs after header cleanup Signed-off-by:
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.9-2024-03-01: amdgpu: - GC 11.5.1 updates - Misc display cleanups - NBIO 7.9 updates - Backlight fixes - DMUB fixes - MPO fixes - atomfirmware table updates - SR-IOV fixes - VCN 4.x updates - use RMW accessors for pci config registers - PSR fixes - Suspend/resume fixes - RAS fixes - ABM fixes - Misc code cleanups - SI DPM fix - Revert freesync video amdkfd: - Misc cleanups - Error handling fixes radeon: - use RMW accessors for pci config registers From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240301204857.13960-1-alexander.deucher@amd.comSigned-off-by:
-
- 07 Mar, 2024 3 commits
-
-
R SUNDAR authored
For linux-next repository. ./drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed. ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed. ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed. ./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:162: warning: Function parameter or struct member 'pre_multiplied_alpha' not described in 'mpcc_blnd_cfg' Signed-off-by:
R SUNDAR <prosunofficial@gmail.com> Signed-off-by:
-
Tim Huang authored
Wait for completion of sending the EnableGfxImu message when using the PSP FW loading for SMU ip v14.0. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Signed-off-by:
-
lima1002 authored
Set the default reset method to mode2 for SMU IP v14.0.1 Signed-off-by:
lima1002 <li.ma@amd.com> Signed-off-by:
-
