- 18 May, 2010 40 commits
-
-
Henrik Kurelid authored
The version number in the CA_PMT message sent to the hardware was alwaysed set to zero. This could cause problems if the PMT would change during decryption of a channel since the new CA_PMT would have the same version number as the old. The version number is now copied from the original PMT. Signed-off-by:
Henrik Kurelid <henrik@kurelid.se> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Márton Németh authored
The condition (msg[i].addr == 0xd0) is checked twice the second one is not necessary. This will remove the following compiler warning: az6027.c: In function 'az6027_i2c_xfer': az6027.c:942: warning: 'index' may be used uninitialized in this function az6027.c:943: warning: 'value' may be used uninitialized in this function az6027.c:944: warning: 'length' may be used uninitialized in this function az6027.c:945: warning: 'req' may be used uninitialized in this function Signed-off-by:
Márton Németh <nm127@freemail.hu> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Márton Németh authored
Make the local variables and functions static. Some of them are not exported by their symbol name but used trough other means. For example a pointer of the operation structure is passed through a function call. This will remove the following sparse warnings (see "make C=1"): * pd-video.c:20:5: warning: symbol 'usb_transfer_mode' was not declared. Should it be static? * pd-video.c:621:5: warning: symbol 'fire_all_urb' was not declared. Should it be static? * pd-video.c:881:5: warning: symbol 'vidioc_s_std' was not declared. Should it be static? * pd-video.c:1024:5: warning: symbol 'vidioc_g_audio' was not declared. Should it be static? * pd-video.c:1033:5: warning: symbol 'vidioc_s_audio' was not declared. Should it be static? * pd-video.c:1193:5: warning: symbol 'usb_transfer_stop' was not declared. Should it be static? * pd-video.c:1522:14: warning: symbol 'pd_video_poll' was not declared. Should it be static? * pd-video.c:1528:9: warning: symbol 'pd_video_read' was not declared. Should it be static? * pd-radio.c:164:5: warning: symbol 'tlg_fm_vidioc_g_tuner' was not declared. Should it be static? * pd-radio.c:206:5: warning: symbol 'fm_get_freq' was not declared. Should it be static? * pd-radio.c:249:5: warning: symbol 'fm_set_freq' was not declared. Should it be static? * pd-radio.c:261:5: warning: symbol 'tlg_fm_vidioc_g_ctrl' was not declared. Should it be static? * pd-radio.c:267:5: warning: symbol 'tlg_fm_vidioc_g_exts_ctrl' was not declared. Should it be static? * pd-radio.c:288:5: warning: symbol 'tlg_fm_vidioc_s_exts_ctrl' was not declared. Should it be static? * pd-radio.c:315:5: warning: symbol 'tlg_fm_vidioc_s_ctrl' was not declared. Should it be static? * pd-radio.c:321:5: warning: symbol 'tlg_fm_vidioc_queryctrl' was not declared. Should it be static? * pd-radio.c:340:5: warning: symbol 'tlg_fm_vidioc_querymenu' was not declared. Should it be static? * pd-main.c:58:12: warning: symbol 'firmware_name' was not declared. Should it be static? * pd-main.c:59:19: warning: symbol 'poseidon_driver' was not declared. Should it be static? Signed-off-by:
Huang Shijie <shijie8@gmail.com> Signed-off-by:
-
Márton Németh authored
Use NULL when calling a function with pointer parameter, initializing a pointer and returning a pointer. This will remove the following sparse warning at different locations (see "make C=1"): * warning: Using plain integer as NULL pointer Signed-off-by:
-
Márton Németh authored
When power management is not configured (CONFIG_PM) then some code is no longer necessary. This patch will remove the following compiler warnings: * pd-dvb.c: In function 'poseidon_fe_release': * pd-dvb.c:101: warning: unused variable 'pd' * pd-video.c:14: warning: 'pm_video_suspend' declared 'static' but never defined * pd-video.c:15: warning: 'pm_video_resume' declared 'static' but never defined Signed-off-by:
-
Marton Balint authored
When temporarily there is no video signal, sometimes it takes more than 0.5 secs for the cx88 chip to generate a single frame. If a dma timeout occurs during recording, it confuses the recording application (at least mencoder) and the recording stops. Since there is already an #if 0 for 2 seconds buffer timeout in the code at the -hg development tree, re-enabling that seemed the most simple solution. Signed-off-by:
Marton Balint <cus@fazekas.hu> Signed-off-by:
-
Devin Heitmueller authored
Address a problem found in MythTV where if we are in digital mode, switch to analog mode, and the switch back to digital mode, the first tuning request after switching back to digital mode gets dropped. This is because the au8522 maintains internal state, and would think the demod was already tuned to the target frequency. Thanks to Zaphod Beeblebrox for reporting this issue. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
With applications like MythTV, switching inputs results in closing the digital side and then immediately opening the analog side. This exposes a race condition where the dvb_frontend kernel thread powers down the chip and closes the i2c gate even though we're in the middle of bringing up the analog part of the chip (since the shutdown of the dvb_frontend kernel thread occurs asychronously). Introduce a construct to keep track of what mode we're in, and drop requests to power down or management the gate if we've already switched to analog mode. Thanks to Zaphod Beeblebrox for reporting this issue. Signed-off-by:
-
Valentin Longchamp authored
If the platform hooks are provided, soc_camera powers off the device on close and powers it on on open. This resets the ADDRESS_MODE registers which then can be different to the value the driver has computed for them. This patch setups runtime pm usage for mt9t031 and uses the resume function to write the ADDRESS_MODE registers in order to fix the above described problem. Signed-off-by:
Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
To save power soc-camera powers subdevices down, when they are not in use, if this is supported by the platform. However, the V4L standard dictates, that video nodes shall preserve configuration between uses. This requires runtime power management, which is implemented by this patch. It allows subdevice drivers to specify their runtime power-management methods, by assigning a type to the video device. Signed-off-by:
-
Márton Németh authored
V4L/DVB: The first two parameters of soc_camera_limit_side() are usually pointers to struct v4l2_rect elements. They are signed, so adjust the prototype accordingly This will remove the following sparse warning (see "make C=1"): * incorrect type in argument 1 (different signedness) expected unsigned int *start got signed int *<noident> as well as a couple more signedness mismatches. Signed-off-by: -
Stefan Ringel authored
Reading from zl10353 with tm6000 has a bug. For example: regs w/o patch with patch 0x06 0x00 0x7f 0x07 0x33 0x30 0x08 0x00 0x00 0x09 0x58 0x50 0x0f 0x31 0x28 0x10 0x00 0x84 This patch provides the workaround for the bug [mchehab@redhat.com: Fix merge conflict and add a comment at the workaround] Signed-off-by:
Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by:
-
Stefan Ringel authored
Split the i2c send and receive functions on separate functions [mchehab@redhat.com: CodingStyle and fix the logic for more than 2 read values] Signed-off-by:
-
Dmitri Belimov authored
Fix some messages for add information about TM6010 Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Stefan Ringel authored
The i2c addr on I2C core is specified on 7-bit format, but tm6000 expects it on 8-bit format. Signed-off-by:
-
Stefan Ringel authored
"hack" module were a temporary file with some zl10353 magic. This is not needed anymore. Just remove it. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
[mchehab@redhat.com: Fix CodingStyle] Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Udev calls an utility when it senses a v4l device. So, register needs to be delayed, otherwise it may cause block conditions. Signed-off-by: -
Julia Lawall authored
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Randy Dunlap authored
(1) tm6000 uses usb_*() interfaces, so it should depend on USB. drivers/built-in.o: In function `tm6000_usb_disconnect': tm6000-cards.c:(.text+0x4abb44): undefined reference to `usb_put_dev' drivers/built-in.o: In function `tm6000_usb_probe': tm6000-cards.c:(.text+0x4ac923): undefined reference to `usb_get_dev' tm6000-cards.c:(.text+0x4ac93c): undefined reference to `usb_set_interface' drivers/built-in.o: In function `tm6000_read_write_usb': (.text+0x4ad274): undefined reference to `usb_control_msg' drivers/built-in.o: In function `tm6000_uninit_isoc': tm6000-video.c:(.text+0x4b00d5): undefined reference to `usb_kill_urb' tm6000-video.c:(.text+0x4b00e4): undefined reference to `usb_unlink_urb' tm6000-video.c:(.text+0x4b013c): undefined reference to `usb_buffer_free' tm6000-video.c:(.text+0x4b014b): undefined reference to `usb_free_urb' drivers/built-in.o: In function `tm6000_prepare_isoc': tm6000-video.c:(.text+0x4b0773): undefined reference to `usb_alloc_urb' tm6000-video.c:(.text+0x4b0835): undefined reference to `usb_buffer_alloc' drivers/built-in.o: In function `tm6000_irq_callback': tm6000-video.c:(.text+0x4b1ad3): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `tm6000_module_init': tm6000-cards.c:(.init.text+0x24499): undefined reference to `usb_register_driver' drivers/built-in.o: In function `tm6000_module_exit': tm6000-cards.c:(.exit.text+0x5cb0): undefined reference to `usb_deregister' (2) tm6000-alsa uses interfaces from tm6000-core, so when they are both built as modules, the core interfaces need to be exported. ERROR: "tm6000_set_reg" [drivers/staging/tm6000/tm6000-alsa.ko] undefined! ERROR: "tm6000_get_reg" [drivers/staging/tm6000/tm6000-alsa.ko] undefined! Cc: linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>, linux-media@vger.kernel.org Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Michel Ludwig <michel.ludwig@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Stefan Ringel authored
Fix several parameter sets, in order to make dvb work Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
After sending an i2c command, tm6010 needs a reset, in order to properly work. While here, add the missing I2C_CLASS_TV_DIGITAL i2c class. Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
After successfully running tm6000_init_dev, due to a lack of a return(), the driver runs the error code, unregistering the device. Signed-off-by:
-
Mauro Carvalho Chehab authored
[mchehab@redhat.com: moved the defines for the two beholder boards to a separate commit ] Signed-off-by:
-
Mauro Carvalho Chehab authored
The missing of those board definitions break compilation Signed-off-by: -
Stefan Ringel authored
The init sequence requires extra initialization for tm6010 in digital mode. Signed-off-by:
-
Stefan Ringel authored
The name of xc5000.h include file were wrong Signed-off-by:
-
