- 04 Aug, 2016 40 commits
-
-
Chris Wilson authored
If the GEM objects being rendered with in this request have been exported via dma-buf to a third party, hook ourselves into the dma-buf reservation object so that the third party can serialise with our rendering via the dma-buf fences. Testcase: igt/prime_busy Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-26-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we enable RCU for the requests (providing a grace period where we can inspect a "dead" request before it is freed), we can allow callers to carefully perform lockless lookup of an active request. However, by enabling deferred freeing of requests, we can potentially hog a lot of memory when dealing with tens of thousands of requests per second - with a quick insertion of a synchronize_rcu() inside our shrinker callback, that issue disappears. v2: Currently, it is our responsibility to handle reclaim i.e. to avoid hogging memory with the delayed slab frees. At the moment, we wait for a grace period in the shrinker, and block for all RCU callbacks on oom. Suggested alternatives focus on flushing our RCU callback when we have a certain number of outstanding request frees, and blocking on that flush after a second high watermark. (So rather than wait for the system to run out of memory, we stop issuing requests - both are nondeterministic.) Paul E. McKenney wrote: Another approach is synchronize_rcu() after some largish number of requests. The advantage of this approach is that it throttles the production of callbacks at the source. The corresponding disadvantage is that it slows things up. Another approach is to use call_rcu(), but if the previous call_rcu() is still in flight, block waiting for it. Yet another approach is the get_state_synchronize_rcu() / cond_synchronize_rcu() pair. The idea is to do something like this: cond_synchronize_rcu(cookie); cookie = get_state_synchronize_rcu(); You would of course do an initial get_state_synchronize_rcu() to get things going. This would not block unless there was less than one grace period's worth of time between invocations. But this assumes a busy system, where there is almost always a grace period in flight. But you can make that happen as follows: cond_synchronize_rcu(cookie); cookie = get_state_synchronize_rcu(); call_rcu(&my_rcu_head, noop_function); Note that you need additional code to make sure that the old callback has completed before doing a new one. Setting and clearing a flag with appropriate memory ordering control suffices (e.g,. smp_load_acquire() and smp_store_release()). v3: More comments on compiler and processor order of operations within the RCU lookup and discover we can use rcu_access_pointer() here instead. v4: Wrap i915_gem_active_get_rcu() to take the rcu_read_lock itself. Signed-off-by: -
Chris Wilson authored
Just move it earlier so that we can use the companion nonblocking version in a couple of more callsites without having to add a forward declaration. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-24-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
We are motivated to avoid using a bitfield for obj->active for a couple of reasons. Firstly, we wish to document our lockless read of obj->active using READ_ONCE inside i915_gem_busy_ioctl() and that requires an integral type (i.e. not a bitfield). Secondly, gcc produces abysmal code when presented with a bitfield and that shows up high on the profiles of request tracking (mainly due to excess memory traffic as it converts the bitfield to a register and back and generates frequent AGI in the process). v2: BIT, break up a long line in compute the other engines, new paint for i915_gem_object_is_active (now i915_gem_object_get_active). Signed-off-by:
-
Chris Wilson authored
Rather than a mismash of struct drm_device *dev and struct drm_i915_private *dev_priv being used freely within a function, be consistent and only pass along dev_priv. Signed-off-by:
-
Chris Wilson authored
The individual bits inside obj->frontbuffer_bits are protected by each plane->mutex, but the whole bitfield may be accessed by multiple KMS operations simultaneously and so the RMW need to be under atomics. However, for updating the single field we do not need to mandate that it be under the struct_mutex, one more step towards its removal as the de facto BKL. Signed-off-by:
-
Chris Wilson authored
We only need a very lightweight mechanism here as the locking is only used for co-ordinating a bitfield. v2: Move the cheap unlikely tests into the caller v3: Move the kerneldoc into the header (now separated out into intel_fronbuffer.h for better kerneldoc and readability) Signed-off-by:
-
Chris Wilson authored
In view of adding inline functions into the intel_frontbuffer section, we first split the header into its own file so that we can integrate it more easily with kerneldoc. Signed-off-by:
-
Chris Wilson authored
Since i915_gem_obj_ggtt_pin() is an idiom breaking curry function for i915_gem_object_ggtt_pin(), spare us the confusion and remove it. Removing it now simplifies later patches to change the i915_vma_pin() (and friends) interface. v2: Add a redundant GEM_BUG_ON(!view) to i915_gem_obj_lookup_or_create_ggtt_vma() Signed-off-by:
-
Chris Wilson authored
Not only is i915_vma_pin() called for every single object on every single execbuf, it is usually a simple increment as the VMA is already bound for execution by the GPU. Rearrange the tests for unbound and pin_count overflow so that we can do the increment and test very cheaply and compact enough to inline the operation into execbuf. The trick used is to note that we can check for an overflow bit (keeping space available for it inside the flags) at the same time as checking the binding bits. Signed-off-by:
-
Chris Wilson authored
In preparation to perform some magic to speed up i915_vma_pin(), which is among the hottest of hot paths in execbuf, refactor all the bitfields accessed by i915_vma_pin() into a single unified set of flags. Signed-off-by:
-
Chris Wilson authored
During execbuffer we look up the i915_vma in order to reserve them in the VM. However, we then do a double lookup of the vma in order to then pin them, all because we lack the necessary interfaces to operate on i915_vma - so introduce i915_vma_pin()! v2: Tidy parameter lists to remove one level of redirection in the hot path. Signed-off-by:
-
Chris Wilson authored
In the next few patches, the VMA pinning API is overhauled and to reduce the churn we pull out the update to the accessors into a prep patch. Signed-off-by:
-
Chris Wilson authored
Tracking the size of the VMA as allocated allows us to dramatically reduce the complexity of later functions (like inserting the VMA in to the drm_mm range manager). Signed-off-by:
-
Chris Wilson authored
For consistency, internal functions should take drm_i915_private rather than drm_device. Now that we are subclassing drm_device, there are no more size wins, but being consistent is its own blessing. Signed-off-by:
-
Chris Wilson authored
In order to be consistent with other address space functions, we want to pass around 64-bit sizes, even though all known global GTT are limited to 4GiB. Similarly, we are trying to be consistent in using the _ggtt_ nomenclature when referring to the special global GTT. v2: Update docs to consistently state "global GTT". Signed-off-by:
-
Chris Wilson authored
As we always allocate in chunks of 4096 (that being both the PAGE_SIZE and our own GTT_PAGE_SIZE), we know that all results from the drm_mm are aligned to at least 4096. The drm_mm allocator itself is optimised for alignment == 0, and so by converting alignments of 4096 to 0 we can satisfy our own requirements and still hit the faster path. Signed-off-by:
-
Chris Wilson authored
Split the insertion into the address space's range manager and binding of that object into the GTT to simplify the code flow when pinning a VMA. Signed-off-by:
-
Chris Wilson authored
i915_gem_valid_gtt_space() is used after inserting the VMA to double check the list - the location should have been chosen to pass all the restrictions. Signed-off-by:
-
Chris Wilson authored
Our GPUs impose certain requirements upon buffers that depend upon how exactly they are used. Typically this is expressed as that they require a larger surface than would be naively computed by pitch * height. Normally such requirements are hidden away in the userspace driver, but when we accept pointers from strangers and later impose extra conditions on them, the original client allocator has no idea about the monstrosities in the GPU and we require the userspace driver to inform the kernel how many padding pages are required beyond the client allocation. v2: Long time, no see v3: Try an anonymous union for uapi struct compatibility Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-7-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
This is not the full fix, as we are required to percolate the u64 nature down through the drm_mm stack, but this is required now to prevent explosions due to mismatch between execbuf (eb_vma_misplaced) and vma binding (i915_vma_misplaced) - and reduces the risk of spurious changes as we adjust the vma interface in the next patches. v2: long long casts not required for u64 printk (%llx) Signed-off-by:
-
Chris Wilson authored
Move the single line to the callsite as the name is now misleading, and the purpose is solely to add the request to the execution queue. Here, we can see that if we failed to dispatch the batch from the request, we can forgo flushing the GPU when closing the request. Signed-off-by:
-
Chris Wilson authored
This reimplements the denial-of-service protection against igt from commit 227f782e ("drm/i915: Retire requests before creating a new one") and transfers the stall from before each batch into get_pages(). The issue is that the stall is increasing latency between batches which is detrimental in some cases (especially coupled with execlists) to keeping the GPU well fed. Also we have made the observation that retiring requests can of itself free objects (and requests) and therefore makes a good first step when shrinking. v2: Recycle objects prior to i915_gem_object_get_pages() v3: Remove the reference to the ring from i915_gem_requests_ring() as it operates on an intel_engine_cs. v4: Since commit 9b5f4e5e ("drm/i915: Retire oldest completed request before allocating next") we no longer need the safeguard to retire requests before get_pages(). We no longer see the huge latencies when hitting the shrinker between allocations. Signed-off-by:
-
Chris Wilson authored
We should not rely on obj->active being uptodate unless we manually flush it. Instead, we can verify that the next available batch object is idle by looking at its last active request (and checking it for completion). v2: remove the struct drm_device forward declaration added in the process of removing its necessity Signed-off-by:
-
Chris Wilson authored
Eviction is VM local, so we can ignore the significance of the drm_device in the caller, and leave it to i915_gem_evict_something() to manage itself. Signed-off-by:
-
Chris Wilson authored
Slight micro-optimise to produce combine loops so that gcc is able to optimise the inner-loops concisely. Since we are reviewing the loops, we can update the comments to describe the current state of affairs, in particular the distinction between evicting from the global GTT (which may contain untracked items and transient global pins) and the per-process GTT. Signed-off-by:
-
Chris Wilson authored
On Haswell/Broadwell, the HD-Audio block is inside the HDMI/display power well and so the sna-hda audio codec acquires the display power well while it is operational. However, Skylake separates the powerwells again, but yet we still need the audio powerwell to setup the registers. (But then the hardware uses those registers even while powered off???) Acquiring the powerwell around setting the chicken bits when setting up the audio channel does at least silence the WARNs from touching our registers whilst unpowered. We silence our own test cases, but maybe there is a latent bug in using the audio channel? v2: Grab both rpm wakelock and audio wakelock Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214 Fixes: 03b135ce "ALSA: hda - remove dependency on i915 power well for SKL") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1470240540-29004-1-git-send-email-chris@chris-wilson.co.ukReviewed-by:
-
Ville Syrjälä authored
My ASUS PB278 at least doesn't seem to appreciate when you try to ack sink irqs when there are none. Results in this sort of dmesg spam [drm:drm_dp_dpcd_access] too many retries, giving up Let's skip the ack if there are no pending irqs. I have no clue why we do this in two places. One of them likely should just go away. Oh, and MST has its own sink irq handler too... Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1469717448-4297-12-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
No need to iterate the rates array in intel_dp_max_link_rate(). We know the max rate will be the last entry, and we already know the size. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Manasi D Navare <manasi.d.navare@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
-
Ville Syrjälä authored
With HSW + Dell UP2414Q (at least) drm_probe_ddc() occasionally fails, and then we'll assume that the entire display has been disconnected. We don't need the EDID from the main link, so we can simply check if the sink is MST capable, and if so treat is as connected. v2: Skip drm_probe_ddc() entirely for MST (Daniel) Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Manasi D Navare <manasi.d.navare@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
-
Ville Syrjälä authored
s/active_mst_links/active_streams/ and use it also for SST. We can then use this information in the hpd handling to see if the link is active or not, and thus whether we may need to retrain. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Manasi D Navare <manasi.d.navare@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We can't mix MST with SST/HDMI on the same physical port, so we'll need to reject such configurations in check_digital_port_conflicts(). Nothing else will prevent this as MST has its fake encoders and its own connectors so the cloning checks won't catch this. The same digital port can be used multiple times, but only if all the encoders involved are MST encoders, so we only want to check MST vs. SST/HDMI, not MST vs. MST. And SST/HDMI vs. SST/HDMI we already check. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
The MST vs. SST selection should depend purely on the choice of the connector/encoder. So don't try to determine the correct DDI mode based on the intel_dp->is_mst, which simply tells us whether the sink is in MST mode or not. Instead derive the information from the encoder type. Since the link training code deals in non-fake encoders, we'll also need to keep a second copy of that information around, which we'll now designate as 'link_mst'. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Currently we re-read a bunch of static eDP panel caps from the DPCD over and over again. Let's do it only once to save some time and effort. v2: Make thing less confusing with intel_edp_init_dpcd() (Chris) Move no_aux_handshake setup in there as well v3: Move tps3/rate printout to intel_dp_long_pulse() so that we'll still get them on eDP as well Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: -
Chris Wilson authored
Joonas spotted a discrepancy between the pwrite and pread ioctls, in that pwrite takes the rpm wakelock around its GGTT access, The wakelock is required in order for the GTT to function. In disregard for the current convention, we take the rpm wakelock around the access itself rather than around the struct_mutex as the nesting is not strictly required and such ordering will one day be fixed by explicitly noting the barrier dependencies between the GGTT and rpm. Fixes: b50a5371 ("drm/i915: Support for pread/pwrite ...") Reported-by:
-
Chris Wilson authored
Erratum SKL075: Display Flicker May Occur When Both VT-d And FBC Are Enabled "Display flickering may occur when both FBC (Frame Buffer Compression) and VT - d (Intel
® Virtualization Technology for Directed I/O) are enabled and in use by the display controller." Ville found the w/a name in the database: WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt and also dug out that it affects Broxton. v2: Log when the quirk is applied. v3: Ensure i915.enable_fbc is false when !HAS_FBC() v4: Fix function name after rebase v5: Add Broxton to the workaround Note for backporting to stable, we need to add #define mkwrite_device_info(ptr) \ ((struct intel_device_info *)INTEL_INFO(ptr)) Signed-off-by: -
Chris Wilson authored
Since commit de1add36 ("drm/i915: Decouple execbuf uAPI from internal implementation") the index of the engine (its engine->id) in the internal list no longer matches the hardware id. However, in a couple of locations we missed fixing up the difference. In this case, RING_FAULT_REG() refers to engine->id which is now not what the register offset actually should be. Fortunately, in both case we should be more or less looping over 0..I915_NUM_ENGINES. Fixes: de1add36 ("drm/i915: Decouple execbuf uAPI from internal...") Signed-off-by:
-
Chris Wilson authored
This reverts commit e9f24d5f. The patch was only a stop-gap measure that fixed half the problem - the leak of the fbcon when restarting X. A complete solution required releasing the VMA when the object itself was closed rather than rely on file/process exit. The previous patches add the VMA tracking necessary to do close them along with the object, context or file, and so the time has come to remove the partial fix. Signed-off-by:
-
Chris Wilson authored
When the user closes the context mark it and the dependent address space as closed. As we use an asynchronous destruct method, this has two purposes. First it allows us to flag the closed context and detect internal errors if we to create any new objects for it (as it is removed from the user's namespace, these should be internal bugs only). And secondly, it allows us to immediately reap stale vma. Signed-off-by:
-
Chris Wilson authored
In order to prevent a leak of the vma on shared objects, we need to hook into the object_close callback to destroy the vma on the object for this file. However, if we destroyed that vma immediately we may cause unexpected application stalls as we try to unbind a busy vma - hence we defer the unbind to when we retire the vma. v2: Keep vma allocated until closed. This is useful for a later optimisation, but it is required now in order to handle potential recursion of i915_vma_unbind() by retiring itself. v3: Comments are important. Testcase: igt/gem_ppggtt/flink-and-close-vma-leak Signed-off-by:
-
