- 06 Nov, 2021 40 commits
-
-
SeongJae Park authored
Most memory management user guide documents are in 'admin-guide/mm/', but two of those are in 'vm/'. This moves the two docs into 'admin-guide/mm' for easier documents finding. Link: https://lkml.kernel.org/r/20210917123958.3819-2-sj@kernel.orgSigned-off-by:
SeongJae Park <sjpark@amazon.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Correct a singular versus plural grammar mistake in the help text for the DAMON_VADDR config symbol. Link: https://lkml.kernel.org/r/20210914073451.3883834-1-geert@linux-m68k.org Fixes: 3f49584b ("mm/damon: implement primitives for the virtual memory address spaces") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Marco Elver authored
We have observed that on very large machines with newer CPUs, the static key/branch switching delay is on the order of milliseconds. This is due to the required broadcast IPIs, which simply does not scale well to hundreds of CPUs (cores). If done too frequently, this can adversely affect tail latencies of various workloads. One workaround is to increase the sample interval to several seconds, while decreasing sampled allocation coverage, but the problem still exists and could still increase tail latencies. As already noted in the Kconfig help text, there are trade-offs: at lower sample intervals the dynamic branch results in better performance; however, at very large sample intervals, the static keys mode can result in better performance -- careful benchmarking is recommended. Our initial benchmarking showed that with large enough sample intervals and workloads stressing the allocator, the static keys mode was slightly better. Evaluating and observing the possible system-wide side-effects of the static-key-switching induced broadcast IPIs, however, was a blind spot (in particular on large machines with 100s of cores). Therefore, a major downside of the static keys mode is, unfortunately, that it is hard to predict performance on new system architectures and topologies, but also making conclusions about performance of new workloads based on a limited set of benchmarks. Most distributions will simply select the defaults, while targeting a large variety of different workloads and system architectures. As such, the better default is CONFIG_KFENCE_STATIC_KEYS=n, and re-enabling it is only recommended after careful evaluation. For reference, on x86-64 the condition in kfence_alloc() generates exactly 2 instructions in the kmem_cache_alloc() fast-path: | ... | cmpl $0x0,0x1a8021c(%rip) # ffffffff82d560d0 <kfence_allocation_gate> | je ffffffff812d6003 <kmem_cache_alloc+0x243> | ... which, given kfence_allocation_gate is infrequently modified, should be well predicted by most CPUs. Link: https://lkml.kernel.org/r/20211019102524.2807208-2-elver@google.comSigned-off-by:
Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by:
-
Marco Elver authored
Regardless of KFENCE mode (CONFIG_KFENCE_STATIC_KEYS: either using static keys to gate allocations, or using a simple dynamic branch), always use a static branch to avoid the dynamic branch in kfence_alloc() if KFENCE was disabled at boot. For CONFIG_KFENCE_STATIC_KEYS=n, this now avoids the dynamic branch if KFENCE was disabled at boot. To simplify, also unifies the location where kfence_allocation_gate is read-checked to just be inline in kfence_alloc(). Link: https://lkml.kernel.org/r/20211019102524.2807208-1-elver@google.comSigned-off-by:
-
Marco Elver authored
Initializing memory and setting/checking the canary bytes is relatively expensive, and doing so in the meta->lock critical sections extends the duration with preemption and interrupts disabled unnecessarily. Any reads to meta->addr and meta->size in kfence_guarded_alloc() and kfence_guarded_free() don't require locking meta->lock as long as the object is removed from the freelist: only kfence_guarded_alloc() sets meta->addr and meta->size after removing it from the freelist, which requires a preceding kfence_guarded_free() returning it to the list or the initial state. Therefore move reads to meta->addr and meta->size, including expensive memory initialization using them, out of meta->lock critical sections. Link: https://lkml.kernel.org/r/20210930153706.2105471-1-elver@google.comSigned-off-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by:
-
Marco Elver authored
Use the new kunit_skip() to skip tests if requirements were not met. It makes it easier to see in KUnit's summary if there were skipped tests. Link: https://lkml.kernel.org/r/20210922182541.1372400-1-elver@google.comSigned-off-by:
David Gow <davidgow@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by:
-
Marco Elver authored
Add a note briefly mentioning the new policy about "skipping currently covered allocations if pool close to full." Since this has a notable impact on KFENCE's bug-detection ability on systems with large uptimes, it is worth pointing out the feature. Link: https://lkml.kernel.org/r/20210923104803.2620285-5-elver@google.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
Marco Elver authored
One of KFENCE's main design principles is that with increasing uptime, allocation coverage increases sufficiently to detect previously undetected bugs. We have observed that frequent long-lived allocations of the same source (e.g. pagecache) tend to permanently fill up the KFENCE pool with increasing system uptime, thus breaking the above requirement. The workaround thus far had been increasing the sample interval and/or increasing the KFENCE pool size, but is no reliable solution. To ensure diverse coverage of allocations, limit currently covered allocations of the same source once pool utilization reaches 75% (configurable via `kfence.skip_covered_thresh`) or above. The effect is retaining reasonable allocation coverage when the pool is close to full. A side-effect is that this also limits frequent long-lived allocations of the same source filling up the pool permanently. Uniqueness of an allocation for coverage purposes is based on its (partial) allocation stack trace (the source). A Counting Bloom filter is used to check if an allocation is covered; if the allocation is currently covered, the allocation is skipped by KFENCE. Testing was done using: (a) a synthetic workload that performs frequent long-lived allocations (default config values; sample_interval=1; num_objects=63), and (b) normal desktop workloads on an otherwise idle machine where the problem was first reported after a few days of uptime (default config values). In both test cases the sampled allocation rate no longer drops to zero at any point. In the case of (b) we observe (after 2 days uptime) 15% unique allocations in the pool, 77% pool utilization, with 20% "skipped allocations (covered)". [elver@google.com: simplify and just use hash_32(), use more random stack_hash_seed] Link: https://lkml.kernel.org/r/YU3MRGaCaJiYht5g@elver.google.com [elver@google.com: fix 32 bit] Link: https://lkml.kernel.org/r/20210923104803.2620285-4-elver@google.comSigned-off-by:
-
Marco Elver authored
Move the saving of the stack trace of allocations into __kfence_alloc(), so that the stack entries array can be used outside of kfence_guarded_alloc() and we avoid potentially unwinding the stack multiple times. Link: https://lkml.kernel.org/r/20210923104803.2620285-3-elver@google.comSigned-off-by:
-
Marco Elver authored
Maintain a counter to count allocations that are skipped due to being incompatible (oversized, incompatible gfp flags) or no capacity. This is to compute the fraction of allocations that could not be serviced by KFENCE, which we expect to be rare. Link: https://lkml.kernel.org/r/20210923104803.2620285-2-elver@google.comSigned-off-by:
-
Marco Elver authored
filter_irq_stacks() has little to do with the stackdepot implementation, except that it is usually used by users (such as KASAN) of stackdepot to reduce the stack trace. However, filter_irq_stacks() itself is not useful without a stack trace as obtained by stack_trace_save() and friends. Therefore, move filter_irq_stacks() to kernel/stacktrace.c, so that new users of filter_irq_stacks() do not have to start depending on STACKDEPOT only for filter_irq_stacks(). Link: https://lkml.kernel.org/r/20210923104803.2620285-1-elver@google.comSigned-off-by:
-
Mianhan Liu authored
nr_free_buffer_pages could be exposed through mm.h instead of swap.h. The advantage of this change is that it can reduce the obsolete includes. For example, net/ipv4/tcp.c wouldn't need swap.h any more since it has already included mm.h. Similarly, after checking all the other files, it comes that tcp.c, udp.c meter.c ,... follow the same rule, so these files can have swap.h removed too. Moreover, after preprocessing all the files that use nr_free_buffer_pages, it turns out that those files have already included mm.h.Thus, we can move nr_free_buffer_pages from swap.h to mm.h safely. This change will not affect the compilation of other files. Link: https://lkml.kernel.org/r/20210912133640.1624-1-liumh1@shanghaitech.edu.cnSigned-off-by:
Mianhan Liu <liumh1@shanghaitech.edu.cn> Cc: Jakub Kicinski <kuba@kernel.org> CC: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S . Miller" <davem@davemloft.net> Cc: Simon Horman <horms@verge.net.au> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Stephen Kitt authored
This has served its purpose and is no longer used. All usercopy violations appear to have been handled by now, any remaining instances (or new bugs) will cause copies to be rejected. This isn't a direct revert of commit 2d891fbc ("usercopy: Allow strict enforcement of whitelists"); since usercopy_fallback is effectively 0, the fallback handling is removed too. This also removes the usercopy_fallback module parameter on slab_common. Link: https://github.com/KSPP/linux/issues/153 Link: https://lkml.kernel.org/r/20210921061149.1091163-1-steve@sk2.orgSigned-off-by:
Stephen Kitt <steve@sk2.org> Suggested-by:
Kees Cook <keescook@chromium.org> Acked-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: James Morris <jmorris@namei.org> Cc: "Serge E . Hallyn" <serge@hallyn.com> Signed-off-by:
-
Brian Geffon authored
This change introduces an aged idle interface to the existing idle sysfs file for zram. When CONFIG_ZRAM_MEMORY_TRACKING is enabled the idle file now also accepts an integer argument. This integer is the age (in seconds) of pages to mark as idle. The idle file still supports 'all' as it always has. This new approach allows for much more control over which pages get marked as idle. [bgeffon@google.com: use IS_ENABLED and cleanup comment] Link: https://lkml.kernel.org/r/20210924161128.1508015-1-bgeffon@google.com [bgeffon@google.com: Sergey's cleanup suggestions] Link: https://lkml.kernel.org/r/20210929143056.13067-1-bgeffon@google.com Link: https://lkml.kernel.org/r/20210923130115.1344361-1-bgeffon@google.comSigned-off-by:
Brian Geffon <bgeffon@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Jesse Barnes <jsbarnes@google.com> Signed-off-by:
-
Dan Carpenter authored
snprintf() returns the number of bytes it would have printed if there were space. But it does not count the NUL terminator. So that means that if "count == copied" then this has already overflowed by one character. This bug likely isn't super harmful in real life. Link: https://lkml.kernel.org/r/20210916130404.GA25094@kili Fixes: c0265342 ("zram: introduce zram memory tracking") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by:
-
Jaewon Kim authored
The read_from_bdev_async is not called on atomic context. So GFP_NOIO is available rather than GFP_ATOMIC. If there were reclaimable pages with GFP_NOIO, we can avoid allocation failure and page fault failure. Link: https://lkml.kernel.org/r/20210908005241.28062-1-jaewon31.kim@samsung.comSigned-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Reported-by:
Yong-Taek Lee <ytk.lee@samsung.com> Acked-by:
-
Ira Weiny authored
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace the uses of kmap_atomic() within the highmem code. On profiling clear_huge_page() using ftrace an improvement of 62% was observed on the below setup. Setup:- Below data has been collected on Qualcomm's SM7250 SoC THP enabled (kernel v4.19.113) with only CPU-0(Cortex-A55) and CPU-7(Cortex-A76) switched on and set to max frequency, also DDR set to perf governor. FTRACE Data:- Base data:- Number of iterations: 48 Mean of allocation time: 349.5 us std deviation: 74.5 us v4 data:- Number of iterations: 48 Mean of allocation time: 131 us std deviation: 32.7 us The following simple userspace experiment to allocate 100MB(BUF_SZ) of pages and writing to it gave us a good insight, we observed an improvement of 42% in allocation and writing timings. ------------------------------------------------------------- Test code snippet ------------------------------------------------------------- clock_start(); buf = malloc(BUF_SZ); /* Allocate 100 MB of memory */ for(i=0; i < BUF_SZ_PAGES; i++) { *((int *)(buf + (i*PAGE_SIZE))) = 1; } clock_end(); ------------------------------------------------------------- Malloc test timings for 100MB anon allocation:- Base data:- Number of iterations: 100 Mean of allocation time: 31831 us std deviation: 4286 us v4 data:- Number of iterations: 100 Mean of allocation time: 18193 us std deviation: 4915 us [willy@infradead.org: fix zero_user_segments()] Link: https://lkml.kernel.org/r/YYVhHCJcm2DM2G9u@casper.infradead.org Link: https://lkml.kernel.org/r/20210204073255.20769-2-prathu.baronia@oneplus.comSigned-off-by:Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Prathu Baronia <prathu.baronia@oneplus.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Miaohe Lin authored
There is one possible race window between zs_pool_dec_isolated() and zs_unregister_migration() because wait_for_isolated_drain() checks the isolated count without holding class->lock and there is no order inside zs_pool_dec_isolated(). Thus the below race window could be possible: zs_pool_dec_isolated zs_unregister_migration check pool->destroying != 0 pool->destroying = true; smp_mb(); wait_for_isolated_drain() wait for pool->isolated_pages == 0 atomic_long_dec(&pool->isolated_pages); atomic_long_read(&pool->isolated_pages) == 0 Since we observe the pool->destroying (false) before atomic_long_dec() for pool->isolated_pages, waking pool->migration_wait up is missed. Fix this by ensure checking pool->destroying happens after the atomic_long_dec(&pool->isolated_pages). Link: https://lkml.kernel.org/r/20210708115027.7557-1-linmiaohe@huawei.com Fixes: 701d6785 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool") Signed-off-by:Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Henry Burns <henryburns@google.com> Signed-off-by:
-
Alistair Popple authored
During migration special page table entries are installed for each page being migrated. These entries store the pfn and associated permissions of ptes mapping the page being migarted. Device-private pages use special swap pte entries to distinguish read-only vs. writeable pages which the migration code checks when creating migration entries. Normally this follows a fast path in migrate_vma_collect_pmd() which correctly copies the permissions of device-private pages over to migration entries when migrating pages back to the CPU. However the slow-path falls back to using try_to_migrate() which unconditionally creates read-only migration entries for device-private pages. This leads to unnecessary double faults on the CPU as the new pages are always mapped read-only even when they could be mapped writeable. Fix this by correctly copying device-private permissions in try_to_migrate_one(). Link: https://lkml.kernel.org/r/20211018045247.3128058-1-apopple@nvidia.comSigned-off-by:
Alistair Popple <apopple@nvidia.com> Reported-by:
Ralph Campbell <rcampbell@nvidia.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
David Hildenbrand authored
Let's communicate driver-managed regions to memblock, to properly teach kexec_file with CONFIG_ARCH_KEEP_MEMBLOCK to not place images on these memory regions. Link: https://lkml.kernel.org/r/20211004093605.5830-6-david@redhat.comSigned-off-by:
David Hildenbrand <david@redhat.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jianyong Wu <Jianyong.Wu@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shahab Vahedi <shahab@synopsys.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by:
-
David Hildenbrand authored
Let's add a flag that corresponds to IORESOURCE_SYSRAM_DRIVER_MANAGED, indicating that we're dealing with a memory region that is never indicated in the firmware-provided memory map, but always detected and added by a driver. Similar to MEMBLOCK_HOTPLUG, most infrastructure has to treat such memory regions like ordinary MEMBLOCK_NONE memory regions -- for example, when selecting memory regions to add to the vmcore for dumping in the crashkernel via for_each_mem_range(). However, especially kexec_file is not supposed to select such memblocks via for_each_free_mem_range() / for_each_free_mem_range_reverse() to place kexec images, similar to how we handle IORESOURCE_SYSRAM_DRIVER_MANAGED without CONFIG_ARCH_KEEP_MEMBLOCK. We'll make sure that memory hotplug code sets the flag where applicable (IORESOURCE_SYSRAM_DRIVER_MANAGED) next. This prepares architectures that need CONFIG_ARCH_KEEP_MEMBLOCK, such as arm64, for virtio-mem support. Note that kexec *must not* indicate this memory to the second kernel and *must not* place kexec-images on this memory. Let's add a comment to kexec_walk_memblock(), documenting how we handle MEMBLOCK_DRIVER_MANAGED now just like using IORESOURCE_SYSRAM_DRIVER_MANAGED in locate_mem_hole_callback() for kexec_walk_resources(). Also note that MEMBLOCK_HOTPLUG cannot be reused due to different semantics: MEMBLOCK_HOTPLUG: memory is indicated as "System RAM" in the firmware-provided memory map and added to the system early during boot; kexec *has to* indicate this memory to the second kernel and can place kexec-images on this memory. After memory hotunplug, kexec has to be re-armed. We mostly ignore this flag when "movable_node" is not set on the kernel command line, because then we're told to not care about hotunpluggability of such memory regions. MEMBLOCK_DRIVER_MANAGED: memory is not indicated as "System RAM" in the firmware-provided memory map; this memory is always detected and added to the system by a driver; memory might not actually be physically hotunpluggable. kexec *must not* indicate this memory to the second kernel and *must not* place kexec-images on this memory. Link: https://lkml.kernel.org/r/20211004093605.5830-5-david@redhat.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jianyong Wu <Jianyong.Wu@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shahab Vahedi <shahab@synopsys.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by:
-
David Hildenbrand authored
We want to specify flags when hotplugging memory. Let's prepare to pass flags to memblock_add_node() by adjusting all existing users. Note that when hotplugging memory the system is already up and running and we might have concurrent memblock users: for example, while we're hotplugging memory, kexec_file code might search for suitable memory regions to place kexec images. It's important to add the memory directly to memblock via a single call with the right flags, instead of adding the memory first and apply flags later: otherwise, concurrent memblock users might temporarily stumble over memblocks with wrong flags, which will be important in a follow-up patch that introduces a new flag to properly handle add_memory_driver_managed(). Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.comAcked-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
David Hildenbrand authored
The description of MEMBLOCK_HOTPLUG is currently short and consequently misleading: we're actually dealing with a memory region that might get hotunplugged later (i.e., the platform+firmware supports it), yet it is indicated in the firmware-provided memory map as system ram that will just get used by the system for any purpose when not taking special care. The firmware marked this memory region as a hot(un)plugged (e.g., hotplugged before reboot), implying that it might get hotunplugged again later. Whether we consider this information depends on the "movable_node" kernel commandline parameter: only with "movable_node" set, we'll try keeping this memory hotunpluggable, for example, by not serving early allocations from this memory region and by letting the buddy manage it using the ZONE_MOVABLE. Let's make this clearer by extending the documentation. Note: kexec *has to* indicate this memory to the second kernel. With "movable_node" set, we don't want to place kexec-images on this memory. Without "movable_node" set, we don't care and can place kexec-images on this memory. In both cases, after successful memory hotunplug, kexec has to be re-armed to update the memory map for the second kernel and to place the kexec-images somewhere else. Link: https://lkml.kernel.org/r/20211004093605.5830-3-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Patch series "mm/memory_hotplug: full support for add_memory_driver_managed() with CONFIG_ARCH_KEEP_MEMBLOCK", v2. Architectures that require CONFIG_ARCH_KEEP_MEMBLOCK=y, such as arm64, don't cleanly support add_memory_driver_managed() yet. Most prominently, kexec_file can still end up placing kexec images on such driver-managed memory, resulting in undesired behavior, for example, having kexec images located on memory not part of the firmware-provided memory map. Teaching kexec to not place images on driver-managed memory is especially relevant for virtio-mem. Details can be found in commit 7b7b2721 ("mm/memory_hotplug: introduce add_memory_driver_managed()"). Extend memblock with a new flag and set it from memory hotplug code when applicable. This is required to fully support virtio-mem on arm64, making also kexec_file behave like on x86-64. This patch (of 2): If memblock_add_node() fails, we're most probably running out of memory. While this is unlikely to happen, it can happen and having memory added without a memblock can be problematic for architectures that use memblock to detect valid memory. Let's fail in a nice way instead of silently ignoring the error. Link: https://lkml.kernel.org/r/20211004093605.5830-1-david@redhat.com Link: https://lkml.kernel.org/r/20211004093605.5830-2-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
CONFIG_MEMORY_HOTPLUG was marked BROKEN over one year and we just restricted it to 64 bit. Let's remove the unused x86 32bit implementation and simplify the Kconfig. Link: https://lkml.kernel.org/r/20210929143600.49379-7-david@redhat.comSigned-off-by:
Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
David Hildenbrand authored
These functions no longer exist. Link: https://lkml.kernel.org/r/20210929143600.49379-6-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
We don't support CONFIG_MEMORY_HOTPLUG on 32 bit and consequently not HIGHMEM. Let's remove any leftover code -- including the unused "status_change_nid_high" field part of the memory notifier. Link: https://lkml.kernel.org/r/20210929143600.49379-5-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
32 bit support is broken in various ways: for example, we can online memory that should actually go to ZONE_HIGHMEM to ZONE_MOVABLE or in some cases even to one of the other kernel zones. We marked it BROKEN in commit b59d02ed ("mm/memory_hotplug: disable the functionality for 32b") almost one year ago. According to that commit it might be broken at least since 2017. Further, there is hardly a sane use case nowadays. Let's just depend completely on 64bit, dropping the "BROKEN" dependency to make clear that we are not going to support it again. Next, we'll remove some HIGHMEM leftovers from memory hotplug code to clean up. Link: https://lkml.kernel.org/r/20210929143600.49379-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
David Hildenbrand authored
Patch series "mm/memory_hotplug: Kconfig and 32 bit cleanups". Some cleanups around CONFIG_MEMORY_HOTPLUG, including removing 32 bit leftovers of memory hotplug support. This patch (of 6): SPARSEMEM is the only possible memory model for x86-64, FLATMEM is not possible: config ARCH_FLATMEM_ENABLE def_bool y depends on X86_32 && !NUMA And X86_64_ACPI_NUMA (obviously) only supports x86-64: config X86_64_ACPI_NUMA def_bool y depends on X86_64 && NUMA && ACPI && PCI Let's just remove the CONFIG_X86_64_ACPI_NUMA dependency, as it does no longer make sense. Link: https://lkml.kernel.org/r/20210929143600.49379-2-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Commit e83a437f ("mm/memory_hotplug: introduce "auto-movable" online policy") introduced a new memory online policy to automatically select a zone for memory blocks to be onlined. It added a way to set the active online policy and tunables for the auto-movable online policy. Follow-up commits tweaked the "auto-movable" policy to also consider memory device details when selecting zones for memory blocks to be onlined. Let's document the new toggles and how the two online policies we have work. [david@redhat.com: updates] Link: https://lkml.kernel.org/r/20211011082058.6076-4-david@redhat.com Link: https://lkml.kernel.org/r/20210930144117.23641-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
We accidentially added a superfluous "s". Link: https://lkml.kernel.org/r/20210930144117.23641-3-david@redhat.com Fixes: ac3332c4 ("memory-hotplug.rst: complete admin-guide overhaul") Signed-off-by:
-
David Hildenbrand authored
Patch series "memory-hotplug.rst: document the "auto-movable" online policy". Now that the memory-hotplug.rst overhaul is upstream, proper documentation for the "auto-movable" online policy, documenting all new toggles and options. Along, two fixes for the original overhaul. This patch (of 3): We really want to refer to the "movable_node" kernel command line parameter here. Link: https://lkml.kernel.org/r/20210930144117.23641-2-david@redhat.com Fixes: ac3332c4 ("memory-hotplug.rst: complete admin-guide overhaul") Signed-off-by:
-
Tang Yizhou authored
online_policy_to_str is only used in memory_hotplug.c and should be defined as static. Link: https://lkml.kernel.org/r/20210913024534.26161-1-tangyizhou@huawei.comSigned-off-by:
Tang Yizhou <tangyizhou@huawei.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
-
David Hildenbrand authored
The madv_populate selftest currently builds with a warning when the local installed headers (via the distribution) don't include MADV_POPULATE_READ and MADV_POPULATE_WRITE. The warning is correct, because the test cannot locate the necessary header. The reason is that the in-tree installed headers (usr/include) have a "linux" instead of a "sys" subdirectory. Including "linux/mman.h" instead of "sys/mman.h" doesn't work (e.g., mmap() and madvise() are not defined that way). The only thing that seems to work is including "linux/mman.h" in addition to "sys/mman.h". We can get rid of our availability check and simplify. Link: https://lkml.kernel.org/r/20211015165758.41374-1-david@redhat.comSigned-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Lin Feng authored
fragmentation_index may return -1000 and the corresponding formated value showed by seq_printf will take a negative signatrue, but other positive formated values don't take a positive signatrue, so the output becomes unaligned. before: Node 0, zone DMA -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone DMA32 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone Normal -1.000 -1.000 -1.000 -1.000 0.931 0.966 0.983 0.992 0.996 0.998 0.999 after this patch: Node 0, zone DMA -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone DMA32 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone Normal -1.000 -1.000 -1.000 -1.000 0.931 0.966 0.983 0.992 0.996 0.998 0.999 Link: https://lkml.kernel.org/r/20211019103241.134797-1-linf@wangsu.comSigned-off-by:
Lin Feng <linf@wangsu.com> Signed-off-by:
-
Liu Shixin authored
KCSAN reports a data-race on v5.10 which also exists on mainline: BUG: KCSAN: data-race in extfrag_for_order+0x33/0x2d0 race at unknown origin, with read to 0xffff9ee9bfffab48 of 8 bytes by task 34 on cpu 1: extfrag_for_order+0x33/0x2d0 kcompactd+0x5f0/0xce0 kthread+0x1f9/0x220 ret_from_fork+0x22/0x30 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 34 Comm: kcompactd0 Not tainted 5.10.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Access to zone->free_area[order].nr_free in extfrag_for_order() and frag_show_print() is lockless. That's intentional and the stats are a rough estimate anyway. Annotate them with data_race(). [liushixin2@huawei.com: add comments] Link: https://lkml.kernel.org/r/20210918084655.2696522-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20210908015606.3999871-1-liushixin2@huawei.comSigned-off-by:
Liu Shixin <liushixin2@huawei.com> Cc: "Paul E . McKenney" <paulmck@kernel.org> Signed-off-by:
-
Pedro Demarchi Gomes authored
Add test case of KSM merging time using mostly huge pages Link: https://lkml.kernel.org/r/20211013044045.360251-1-pedrodemargomes@gmail.comSigned-off-by:
Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Platforms can have non-contiguous NUMA nodes like below #numactl -H available: 2 nodes (0,8) ..... node distances: node 0 8 0: 10 40 8: 40 10 #numactl -H available: 1 nodes (1) .... node distances: node 1 1: 10 Hence update the test to not assume the presence of Node 0 and 1 and also use numa_num_configured_nodes() instead of numa_max_node for finding whether to skip the test. Link: https://lkml.kernel.org/r/20210914141414.350759-1-aneesh.kumar@linux.ibm.com Fixes: 82e717ad ("selftests: vm: add KSM merging across nodes test") Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Kefeng Wang authored
When nommu, the arch_get_unmapped_area() will not be called, just kill it. Link: https://lkml.kernel.org/r/20210910061906.36299-1-wangkefeng.wang@huawei.comSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
