- 04 Sep, 2018 10 commits
-
-
Michael Chan authored
Remove unused bnxt_subtract_ulp_resources(). Change bnxt_get_max_func_irqs() to static since it is only locally used. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
When the driver detects that resources have changed during open, it should reset the rx and tx rings to 0. This will properly setup the init sequence to initialize the default rings again. We also need to signal the RDMA driver to stop and clear its interrupts. We then call the RoCE driver to restart if a new set of default rings is successfully reserved. Fixes: 25e1acd6 ("bnxt_en: Notify firmware about IF state changes.") Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: two fixes for spp_ipv6_flowlabel and spp_dscp sockopts This patchset fixes two problems in sctp_apply_peer_addr_params() when setting spp_ipv6_flowlabel or spp_dscp. ==================== Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
When users set params.spp_address and get a trans, ipv6_flowlabel flag should be applied into this trans. But even if this one is not an ipv6 trans, it should not go to apply it into all other transes of the asoc but simply ignore it. Fixes: 0b0dce7a ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
Now in sctp_apply_peer_addr_params(), if SPP_IPV6_FLOWLABEL flag is set and trans is NULL, it would use trans as the index variable to traverse transport_addr_list, then trans is set as the last transport of it. Later, if SPP_DSCP flag is set, it would enter into the wrong branch as trans is actually an invalid reference. So fix it by using a new index variable to traverse transport_addr_list for both SPP_DSCP and SPP_IPV6_FLOWLABEL flags process. Fixes: 0b0dce7a ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Ivan Mikhaylov authored
__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1 by copy-paste mistake for emac4syn. Fixes: 45d6e545 ("net/ibm/emac: add 8192 rx/tx fifo size") Signed-off-by:
Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by:
-
Vlad Buslov authored
Currently, tcf_action_delete() nulls actions array pointer after putting and deleting it. However, if tcf_idr_delete_index() returns an error, pointer to action is not set to null. That results it being released second time in error handling code of tca_action_gd(). Kasan error: [ 807.367755] ================================================================== [ 807.375844] BUG: KASAN: use-after-free in tc_setup_cb_call+0x14e/0x250 [ 807.382763] Read of size 8 at addr ffff88033e636000 by task tc/2732 [ 807.391289] CPU: 0 PID: 2732 Comm: tc Tainted: G W 4.19.0-rc1+ #799 [ 807.399542] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 807.407948] Call Trace: [ 807.410763] dump_stack+0x92/0xeb [ 807.414456] print_address_description+0x70/0x360 [ 807.419549] kasan_report+0x14d/0x300 [ 807.423582] ? tc_setup_cb_call+0x14e/0x250 [ 807.428150] tc_setup_cb_call+0x14e/0x250 [ 807.432539] ? nla_put+0x65/0xe0 [ 807.436146] fl_dump+0x394/0x3f0 [cls_flower] [ 807.440890] ? fl_tmplt_dump+0x140/0x140 [cls_flower] [ 807.446327] ? lock_downgrade+0x320/0x320 [ 807.450702] ? lock_acquire+0xe2/0x220 [ 807.454819] ? is_bpf_text_address+0x5/0x140 [ 807.459475] ? memcpy+0x34/0x50 [ 807.462980] ? nla_put+0x65/0xe0 [ 807.466582] tcf_fill_node+0x341/0x430 [ 807.470717] ? tcf_block_put+0xe0/0xe0 [ 807.474859] tcf_node_dump+0xdb/0xf0 [ 807.478821] fl_walk+0x8e/0x170 [cls_flower] [ 807.483474] tcf_chain_dump+0x35a/0x4d0 [ 807.487703] ? tfilter_notify+0x170/0x170 [ 807.492091] ? tcf_fill_node+0x430/0x430 [ 807.496411] tc_dump_tfilter+0x362/0x3f0 [ 807.500712] ? tc_del_tfilter+0x850/0x850 [ 807.505104] ? kasan_unpoison_shadow+0x30/0x40 [ 807.509940] ? __mutex_unlock_slowpath+0xcf/0x410 [ 807.515031] netlink_dump+0x263/0x4f0 [ 807.519077] __netlink_dump_start+0x2a0/0x300 [ 807.523817] ? tc_del_tfilter+0x850/0x850 [ 807.528198] rtnetlink_rcv_msg+0x46a/0x6d0 [ 807.532671] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.536878] ? tc_del_tfilter+0x850/0x850 [ 807.541280] netlink_rcv_skb+0x18d/0x200 [ 807.545570] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.549773] ? netlink_ack+0x500/0x500 [ 807.553913] netlink_unicast+0x2d0/0x370 [ 807.558212] ? netlink_attachskb+0x340/0x340 [ 807.562855] ? _copy_from_iter_full+0xe9/0x3e0 [ 807.567677] ? import_iovec+0x11e/0x1c0 [ 807.571890] netlink_sendmsg+0x3b9/0x6a0 [ 807.576192] ? netlink_unicast+0x370/0x370 [ 807.580684] ? netlink_unicast+0x370/0x370 [ 807.585154] sock_sendmsg+0x6b/0x80 [ 807.589015] ___sys_sendmsg+0x4a1/0x520 [ 807.593230] ? copy_msghdr_from_user+0x210/0x210 [ 807.598232] ? do_wp_page+0x174/0x880 [ 807.602276] ? __handle_mm_fault+0x749/0x1c10 [ 807.607021] ? __handle_mm_fault+0x1046/0x1c10 [ 807.611849] ? __pmd_alloc+0x320/0x320 [ 807.615973] ? check_chain_key+0x140/0x1f0 [ 807.620450] ? check_chain_key+0x140/0x1f0 [ 807.624929] ? __fget_light+0xbc/0xd0 [ 807.628970] ? __sys_sendmsg+0xd7/0x150 [ 807.633172] __sys_sendmsg+0xd7/0x150 [ 807.637201] ? __ia32_sys_shutdown+0x30/0x30 [ 807.641846] ? up_read+0x53/0x90 [ 807.645442] ? __do_page_fault+0x484/0x780 [ 807.649949] ? do_syscall_64+0x1e/0x2c0 [ 807.654164] do_syscall_64+0x72/0x2c0 [ 807.658198] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.663625] RIP: 0033:0x7f42e9870150 [ 807.667568] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 807.687328] RSP: 002b:00007ffdbf595b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 807.695564] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f42e9870150 [ 807.703083] RDX: 0000000000000000 RSI: 00007ffdbf595b80 RDI: 0000000000000003 [ 807.710605] RBP: 00007ffdbf599d90 R08: 0000000000679bc0 R09: 000000000000000f [ 807.718127] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdbf599d88 [ 807.725651] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 807.735048] Allocated by task 2687: [ 807.738902] kasan_kmalloc+0xa0/0xd0 [ 807.742852] __kmalloc+0x118/0x2d0 [ 807.746615] tcf_idr_create+0x44/0x320 [ 807.750738] tcf_nat_init+0x41e/0x530 [act_nat] [ 807.755638] tcf_action_init_1+0x4e0/0x650 [ 807.760104] tcf_action_init+0x1ce/0x2d0 [ 807.764395] tcf_exts_validate+0x1d8/0x200 [ 807.768861] fl_change+0x55a/0x26b4 [cls_flower] [ 807.773845] tc_new_tfilter+0x748/0xa20 [ 807.778051] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.782517] netlink_rcv_skb+0x18d/0x200 [ 807.786804] netlink_unicast+0x2d0/0x370 [ 807.791095] netlink_sendmsg+0x3b9/0x6a0 [ 807.795387] sock_sendmsg+0x6b/0x80 [ 807.799240] ___sys_sendmsg+0x4a1/0x520 [ 807.803445] __sys_sendmsg+0xd7/0x150 [ 807.807473] do_syscall_64+0x72/0x2c0 [ 807.811506] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.818776] Freed by task 2728: [ 807.822283] __kasan_slab_free+0x122/0x180 [ 807.826752] kfree+0xf4/0x2f0 [ 807.830080] __tcf_action_put+0x5a/0xb0 [ 807.834281] tcf_action_put_many+0x46/0x70 [ 807.838747] tca_action_gd+0x232/0xc40 [ 807.842862] tc_ctl_action+0x215/0x230 [ 807.846977] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.851444] netlink_rcv_skb+0x18d/0x200 [ 807.855731] netlink_unicast+0x2d0/0x370 [ 807.860021] netlink_sendmsg+0x3b9/0x6a0 [ 807.864312] sock_sendmsg+0x6b/0x80 [ 807.868166] ___sys_sendmsg+0x4a1/0x520 [ 807.872372] __sys_sendmsg+0xd7/0x150 [ 807.876401] do_syscall_64+0x72/0x2c0 [ 807.880431] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.887704] The buggy address belongs to the object at ffff88033e636000 which belongs to the cache kmalloc-256 of size 256 [ 807.900909] The buggy address is located 0 bytes inside of 256-byte region [ffff88033e636000, ffff88033e636100) [ 807.913155] The buggy address belongs to the page: [ 807.918322] page:ffffea000cf98d80 count:1 mapcount:0 mapping:ffff88036f80ee00 index:0x0 compound_mapcount: 0 [ 807.928831] flags: 0x5fff8000008100(slab|head) [ 807.933647] raw: 005fff8000008100 ffffea000db44f00 0000000400000004 ffff88036f80ee00 [ 807.942050] raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 [ 807.950456] page dumped because: kasan: bad access detected [ 807.958240] Memory state around the buggy address: [ 807.963405] ffff88033e635f00: fc fc fc fc fb fb fb fb fb fb fb fc fc fc fc fb [ 807.971288] ffff88033e635f80: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc [ 807.979166] >ffff88033e636000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 807.994882] ^ [ 807.998477] ffff88033e636080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 808.006352] ffff88033e636100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 808.014230] ================================================================== [ 808.022108] Disabling lock debugging due to kernel taint Fixes: edfaf94f ("net_sched: improve and refactor tcf_action_put_many()") Signed-off-by:Vlad Buslov <vladbu@mellanox.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Gleb Fotengauer-Malinovskiy authored
The _IOC_READ flag fits this ioctl request more because this request actually only writes to, but doesn't read from userspace. See NOTEs in include/uapi/asm-generic/ioctl.h for more information. Fixes: 429711ae ("vhost: switch to use new message format") Signed-off-by:
Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Anthony Wong authored
This card identifies itself as: Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06) Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468] Adding a new entry to rtl8169_pci_tbl makes the card work. Link: http://launchpad.net/bugs/1788730Signed-off-by:
Anthony Wong <anthony.wong@ubuntu.com> Signed-off-by:
-
Hangbin Liu authored
man ip-tunnel ttl section says: 0 is a special value meaning that packets inherit the TTL value. IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not implement it yet. To make IPv6 behave consistently with IP tunnel, add ipv6 tunnel inherit support. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
- 02 Sep, 2018 13 commits
-
-
Vinson Lee authored
Include linux/in6.h for struct in6_addr. /usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type struct in6_addr bound_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type struct in6_addr connected_addr; ^~~~~~~~~~~~~~ /usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type struct in6_addr local_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type struct in6_addr peer_addr; ^~~~~~~~~ /usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type struct in6_addr src_addr; ^~~~~~~~ /usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type struct in6_addr dst_addr; ^~~~~~~~ Fixes: b7ff8b10 ("rds: Extend RDS API for IPv6 support") Signed-off-by:Vinson Lee <vlee@freedesktop.org> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Jia-Ju Bai authored
The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-09-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix one remaining buggy offset override in sockmap's bpf_msg_pull_data() when linearizing multiple scatterlist elements, from Tushar. 2) Fix BPF sockmap's misuse of ULP when a collision with another ULP is found on map update where it would release existing ULP. syzbot found and triggered this couple of times now, fix from John. 3) Add missing xskmap type to bpftool so it will properly show the type on map dump, from Prashant. ==================== Signed-off-by: -
David Ahern authored
Jan reported a regression after an update to 4.18.5. In this case ipv6 default route is setup by systemd-networkd based on data from an RA. The RA contains an MTU of 1492 which is used when the route is first inserted but then systemd-networkd pushes down updates to the default route without the mtu set. Prior to the change to fib6_info, metrics such as MTU were held in the dst_entry and rt6i_pmtu in rt6_info contained an update to the mtu if any. ip6_mtu would look at rt6i_pmtu first and use it if set. If not, the value from the metrics is used if it is set and finally falling back to the idev value. After the fib6_info change metrics are contained in the fib6_info struct and there is no equivalent to rt6i_pmtu. To maintain consistency with the old behavior the new code should only reset the MTU in the metrics if the route update has it set. Fixes: d4ead6b3 ("net/ipv6: move metrics from dst to rt6_info") Reported-by:
Jan Janssen <medhefgo@web.de> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Tony Lindgren authored
The cpsw-phy-sel device is not a child of the cpsw interconnect target module. It lives in the system control module. Let's fix this issue by trying to use cpsw-phy-sel phandle first if it exists and if not fall back to current usage of trying to find the cpsw-phy-sel child. That way the phy sel driver can be a child of the system control module where it belongs in the device tree. Without this fix, we cannot have a proper interconnect target module hierarchy in device tree for things like genpd. Note that deferred probe is mostly not supported by cpsw and this patch does not attempt to fix that. In case deferred probe support is needed, this could be added to cpsw_slave_open() and phy_connect() so they start handling and returning errors. For documenting it, looks like the cpsw-phy-sel is used for all cpsw device tree nodes. It's missing the related binding documentation, so let's also update the binding documentation accordingly. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
The current cpsw usage for cpsw-phy-sel is undocumented but is used for all the boards using cpsw. And cpsw-phy-sel is not really a child of the cpsw device, it lives in the system control module instead. Let's document the existing usage, and improve it a bit where we prefer to use a phandle instead of a child device for it. That way we can properly describe the hardware in dts files for things like genpd. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== igmp: fix two incorrect unsolicit report count issues Just like the subject, fix two minor igmp unsolicit report count issues. ==================== Signed-off-by: -
Hangbin Liu authored
After link down and up, i.e. when call ip_mc_up(), we doesn't init im->unsolicit_count. So after igmp_timer_expire(), we will not start timer again and only send one unsolicit report at last. Fix it by initializing im->unsolicit_count in igmp_group_added(), so we can respect igmp robustness value. Fixes: 24803f38 ("igmp: do not remove igmp souce list info when set link down") Signed-off-by:
-
Hangbin Liu authored
We should not start timer if im->unsolicit_count equal to 0 after decrease. Or we will send one more unsolicit report message. i.e. 3 instead of 2 by default. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
John Fastabend authored
Currently we check sk_user_data is non NULL to determine if the sk exists in a map. However, this is not sufficient to ensure the psock or the ULP ops are not in use by another user, such as kcm or TLS. To avoid this when adding a sock to a map also verify it is of the correct ULP type. Additionally, when releasing a psock verify that it is the TCP_ULP_BPF type before releasing the ULP. The error case where we abort an update due to ULP collision can cause this error path. For example, __sock_map_ctx_update_elem() [...] err = tcp_set_ulp_id(sock, TCP_ULP_BPF) <- collides with TLS if (err) <- so err out here goto out_free [...] out_free: smap_release_sock() <- calling tcp_cleanup_ulp releases the TLS ULP incorrectly. Fixes: 2f857d04 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support") Signed-off-by:John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Prashant Bhole authored
When listed all maps, bpftool currently shows (null) for xskmap. Added xskmap type in map_type_name[] to show correct type. Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Tushar Dave authored
Helper bpf_msg_pull_data() mistakenly reuses variable 'offset' while linearizing multiple scatterlist elements. Variable 'offset' is used to find first starting scatterlist element i.e. msg->data = sg_virt(&sg[first_sg]) + start - offset" Use different variable name while linearizing multiple scatterlist elements so that value contained in variable 'offset' won't get overwritten. Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by:Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by:
-
Alexey Kodanev authored
Commit 80f1a0f4 ("net/ipv6: Put lwtstate when destroying fib6_info") partially fixed the kmemleak [1], lwtstate can be copied from fib6_info, with ip6_rt_copy_init(), and it should be done only once there. rt->dst.lwtstate is set by ip6_rt_init_dst(), at the start of the function ip6_rt_copy_init(), so there is no need to get it again at the end. With this patch, lwtstate also isn't copied from RTF_REJECT routes. [1]: unreferenced object 0xffff880b6aaa14e0 (size 64): comm "ip", pid 10577, jiffies 4295149341 (age 1273.903s) hex dump (first 32 bytes): 01 00 04 00 04 00 00 00 10 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000018664623>] lwtunnel_build_state+0x1bc/0x420 [<00000000b73aa29a>] ip6_route_info_create+0x9f7/0x1fd0 [<00000000ee2c5d1f>] ip6_route_add+0x14/0x70 [<000000008537b55c>] inet6_rtm_newroute+0xd9/0xe0 [<000000002acc50f5>] rtnetlink_rcv_msg+0x66f/0x8e0 [<000000008d9cd381>] netlink_rcv_skb+0x268/0x3b0 [<000000004c893c76>] netlink_unicast+0x417/0x5a0 [<00000000f2ab1afb>] netlink_sendmsg+0x70b/0xc30 [<00000000890ff0aa>] sock_sendmsg+0xb1/0xf0 [<00000000a2e7b66f>] ___sys_sendmsg+0x659/0x950 [<000000001e7426c8>] __sys_sendmsg+0xde/0x170 [<00000000fe411443>] do_syscall_64+0x9f/0x4a0 [<000000001be7b28b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000006d21f353>] 0xffffffffffffffff Fixes: 6edb3c96 ("net/ipv6: Defer initialization of dst to data path") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by:
-
- 01 Sep, 2018 8 commits
-
-
Thomas Falcon authored
Check the return codes of these functions and halt reset in case of failure. The driver will remain in a dormant state until the next reset event, when device initialization will be re-attempted. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Sabrina Dubroca authored
Some systems don't have the ping6 binary anymore, and use ping for everything. Detect the absence of ping6 and try to use ping instead. Fixes: d1f1b9cb ("selftests: net: Introduce first PMTU test") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Sabrina Dubroca authored
Since commit 82612de1 ("ip_tunnel: restore binding to ifaces with a large mtu"), the maximum MTU for vti4 is based on IP_MAX_MTU instead of the mysterious constant 0xFFF8. This makes this selftest fail. Fixes: 82612de1 ("ip_tunnel: restore binding to ifaces with a large mtu") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Florian Westphal authored
RFC 1337 says: ''Ignore RST segments in TIME-WAIT state. If the 2 minute MSL is enforced, this fix avoids all three hazards.'' So with net.ipv4.tcp_rfc1337=1, expected behaviour is to have TIME-WAIT sk expire rather than removing it instantly when a reset is received. However, Linux will also re-start the TIME-WAIT timer. This causes connect to fail when tying to re-use ports or very long delays (until syn retry interval exceeds MSL). packetdrill test case: // Demonstrate bogus rearming of TIME-WAIT timer in rfc1337 mode. `sysctl net.ipv4.tcp_rfc1337=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < S 0:0(0) win 29200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 // Receive first segment 0.310 < P. 1:1001(1000) ack 1 win 46 // Send one ACK 0.310 > . 1:1(0) ack 1001 // read 1000 byte 0.310 read(4, ..., 1000) = 1000 // Application writes 100 bytes 0.350 write(4, ..., 100) = 100 0.350 > P. 1:101(100) ack 1001 // ACK 0.500 < . 1001:1001(0) ack 101 win 257 // close the connection 0.600 close(4) = 0 0.600 > F. 101:101(0) ack 1001 win 244 // Our side is in FIN_WAIT_1 & waits for ack to fin 0.7 < . 1001:1001(0) ack 102 win 244 // Our side is in FIN_WAIT_2 with no outstanding data. 0.8 < F. 1001:1001(0) ack 102 win 244 0.8 > . 102:102(0) ack 1002 win 244 // Our side is now in TIME_WAIT state, send ack for fin. 0.9 < F. 1002:1002(0) ack 102 win 244 0.9 > . 102:102(0) ack 1002 win 244 // Peer reopens with in-window SYN: 1.000 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // Therefore, reply with ACK. 1.000 > . 102:102(0) ack 1002 win 244 // Peer sends RST for this ACK. Normally this RST results // in tw socket removal, but rfc1337=1 setting prevents this. 1.100 < R 1002:1002(0) win 244 // second syn. Due to rfc1337=1 expect another pure ACK. 31.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 31.0 > . 102:102(0) ack 1002 win 244 // .. and another RST from peer. 31.1 < R 1002:1002(0) win 244 31.2 `echo no timer restart;ss -m -e -a -i -n -t -o state TIME-WAIT` // third syn after one minute. Time-Wait socket should have expired by now. 63.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // so we expect a syn-ack & 3whs to proceed from here on. 63.0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> Without this patch, 'ss' shows restarts of tw timer and last packet is thus just another pure ack, more than one minute later. This restores the original code from commit 283fd6cf0be690a83 ("Merge in ANK networking jumbo patch") in netdev-vger-cvs.git . For some reason the else branch was removed/lost in 1f28b683339f7 ("Merge in TCP/UDP optimizations and [..]") and timer restart became unconditional. Reported-by:Michal Tesar <mtesar@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Pavel Machek authored
Getting prompt "The RDS Protocol" (RDS) is not too helpful, and it is easily confused with Radio Data System (which we may want to support in kernel, too). Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
-
Dexuan Cui authored
This patch fixes the race between netvsc_probe() and rndis_set_subchannel(), which can cause a deadlock. These are the related 3 paths which show the deadlock: path #1: Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus] Call Trace: schedule schedule_preempt_disabled __mutex_lock __device_attach bus_probe_device device_add vmbus_device_register vmbus_onoffer vmbus_onmessage_work process_one_work worker_thread kthread ret_from_fork path #2: schedule schedule_preempt_disabled __mutex_lock netvsc_probe vmbus_probe really_probe __driver_attach bus_for_each_dev driver_attach_async async_run_entry_fn process_one_work worker_thread kthread ret_from_fork path #3: Workqueue: events netvsc_subchan_work [hv_netvsc] Call Trace: schedule rndis_set_subchannel netvsc_subchan_work process_one_work worker_thread kthread ret_from_fork Before path #1 finishes, path #2 can start to run, because just before the "bus_probe_device(dev);" in device_add() in path #1, there is a line "object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can immediately try to load hv_netvsc and hence path #2 can start to run. Next, path #2 offloads the subchannal's initialization to a workqueue, i.e. path #3, so we can end up in a deadlock situation like this: Path #2 gets the device lock, and is trying to get the rtnl lock; Path #3 gets the rtnl lock and is waiting for all the subchannel messages to be processed; Path #1 is trying to get the device lock, but since #2 is not releasing the device lock, path #1 has to sleep; since the VMBus messages are processed one by one, this means the sub-channel messages can't be procedded, so #3 has to sleep with the rtnl lock held, and finally #2 has to sleep... Now all the 3 paths are sleeping and we hit the deadlock. With the patch, we can make sure #2 gets both the device lock and the rtnl lock together, gets its job done, and releases the locks, so #1 and #3 will not be blocked for ever. Fixes: 8195b139 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by:Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Jakub Kicinski authored
To avoid leaking a running timer we need to wait for the posted reconfigs after netdev is unregistered. In common case the process of deinitializing the device will perform synchronous reconfigs which wait for posted requests, but especially with VXLAN ports being actively added and removed there can be a race condition leaving a timer running after adapter structure is freed leading to a crash. Add an explicit flush after deregistering and for a good measure a warning to check if timer is running just before structures are freed. Fixes: 3d780b92 ("nfp: add async reconfiguration mechanism") Signed-off-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Eric Dumazet authored
This reverts commit 71e41286. mmap()/munmap() can not be backed by kmalloced pages : We fault in : VM_BUG_ON_PAGE(PageSlab(page), page); unmap_single_vma+0x8a/0x110 unmap_vmas+0x4b/0x90 unmap_region+0xc9/0x140 do_munmap+0x274/0x360 vm_munmap+0x81/0xc0 SyS_munmap+0x2b/0x40 do_syscall_64+0x13e/0x1c0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 71e41286 ("packet: switch kvzalloc to allocate memory") Signed-off-by:
John Sperbeck <jsperbeck@google.com> Bisected-by:
-
- 30 Aug, 2018 9 commits
-
-
David S. Miller authored
Paolo Abeni says: ==================== net_sched: reject unknown tcfa_action values As agreed some time ago, this changeset reject unknown tcfa_action values, instead of changing such values under the hood. A tdc test is included to verify the new behavior. v1 -> v2: - helper is now static and renamed according to act_* convention - updated extack message, according to the new behavior ==================== Reviewed-by:
-
Paolo Abeni authored
Only the police action allows us to specify an arbitrary numeric value for the control action. This change introduces an explicit test case for the above feature and then leverage it for testing the kernel behavior for invalid control actions (reject). Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
After the commit 802bfb19 ("net/sched: user-space can't set unknown tcfa_action values"), unknown tcfa_action values are converted to TC_ACT_UNSPEC, but the common agreement is instead rejecting such configurations. This change also introduces a helper to simplify the destruction of a single action, avoiding code duplication. v1 -> v2: - helper is now static and renamed according to act_* convention - updated extack message, according to the new behavior Fixes: 802bfb19 ("net/sched: user-space can't set unknown tcfa_action values") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Baruch Siach authored
Without a valid of_node in struct device we can't find the mvpp2 port device by its DT node. Specifically, this breaks of_find_net_device_by_node(). For example, the Armada 8040 based Clearfog GT-8K uses Marvell 88E6141 switch connected to the &cp1_eth2 port: &cp1_mdio { ... switch0: switch0@4 { compatible = "marvell,mv88e6085"; ... ports { ... port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; }; }; }; }; Without this patch, dsa_register_switch() returns -EPROBE_DEFER because of_find_net_device_by_node() can't find the device_node of the &cp1_eth2 device. Reviewed-by:Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Doug Berger authored
When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6eb ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dinh Nguyen authored
The Stratix10 SoC is an AARCH64 based platform that shares the same ethernet controller that is on other SoCFPGA platforms. Build the platform driver. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
David S. Miller authored
Sabrina Dubroca says: ==================== ipv6: fix error path of inet6_init() The error path of inet6_init() can trigger multiple kernel panics, mostly due to wrong ordering of cleanups. This series fixes those issues. ==================== Reviewed-by:
-
Sabrina Dubroca authored
rtnl_unregister_all(PF_INET6) gets called from inet6_init in cases when no handler has been registered for PF_INET6 yet, for example if ip6_mr_init() fails. Abort and avoid a NULL pointer deref in that case. Example of panic (triggered by faking a failure of register_pernet_subsys): general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [...] RIP: 0010:rtnl_unregister_all+0x17e/0x2a0 [...] Call Trace: ? rtnetlink_net_init+0x250/0x250 ? sock_unregister+0x103/0x160 ? kernel_getsockopt+0x200/0x200 inet6_init+0x197/0x20d Fixes: e2fddf5e ("[IPV6]: Make af_inet6 to check ip6_route_init return value.") Signed-off-by: -
Sabrina Dubroca authored
Commit 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") contains an error in the cleanup path of inet6_init(): when proto_register(&pingv6_prot, 1) fails, we try to unregister &pingv6_prot. When rawv6_init() fails, we skip unregistering &pingv6_prot. Example of panic (triggered by faking a failure of proto_register(&pingv6_prot, 1)): general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [...] RIP: 0010:__list_del_entry_valid+0x79/0x160 [...] Call Trace: proto_unregister+0xbb/0x550 ? trace_preempt_on+0x6f0/0x6f0 ? sock_no_shutdown+0x10/0x10 inet6_init+0x153/0x1b8 Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
-
