Merge tag 'imx-defconfig-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

i.MX defconfig updates for 4.16:
 - Enable CPU_FREQ_STAT for cpufreq transtion statistics support.
 - Enable SRTC driver RTC_DRV_MXC_V2 for i.MX53.
 - Turn on a few drivers useful for DART-MX6 SoM support, SERDEV
   bluetooth, SERIAL_DEV_BUS, WL18XX, and DEFAULT_ON LED Trigger.

* tag 'imx-defconfig-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
  ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
  ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
Signed-off-by: Olof Johansson <olof@lixom.net>

It is very useful for user to retrieve cpufreq transtion statistics
and worth to be default enabled.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This includes one fix from mainline to avoid introducing a build
regression after the pxa tree starts using gpio-reg:

drivers/gpio/gpio-reg.c:106:21: error: 'struct gpio_reg' has no member named 'irq'; did you mean 'irqs'?
drivers/gpio/gpio-reg.c:107:29: error: 'struct gpio_reg' has no member named 'irq'; did you mean 'irqs'?

* commit '8bb65fc0':
  gpio: gpio-reg: fix build
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'davinci-for-v4.16/soc-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "TI DaVinci SoC support updates for v4.16" from Sekhar Nori:

DaVinci SoC updates consisting of non-critical bug fixes including constifying
data structures, removal of unnecessary newlines from gpio labels and code
simplification.

Also a defconfig update for DaVinci, enabling support for USB network adaptors.

* tag 'davinci-for-v4.16/soc-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: constify gpio_led
  ARM: davinci: drop unneeded newline
  ARM: davinci: Use PTR_ERR_OR_ZERO()
  ARM: davinci: make davinci_soc_info structures const
  ARM: davinci: make argument to davinci_common_init() as const
  ARM: davinci_all_defconfig: enable support for USB network adaptors

Merge tag 'imx-soc-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX SoC updates for 4.16" from Shawn Guo:

 - Drop power saving status checking from MMDC driver probe function,
   since there is nothing really depending on power saving being
   enabled.
 - Clean up unused imx3 pm definitions.

* tag 'imx-soc-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: remove unused imx3 pm definitions
  ARM: imx: don't abort MMDC probe if power saving status doesn't match

This is the end. Update port status. Change contact address. Add Mans.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

gpio_led are not supposed to change at runtime.
struct gpio_led_platform_data working with const gpio_led
provided by <linux/leds.h>. So mark the non-const structs
as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

gpio_request uses its second argument as a label, so it doesn't seem
appropriate for it to have a newline.  Done using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Merge tag 'qcom-defconfig-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM Based defconfig Updates for v4.16" from Andy Gross:

* Enable framebuffer, IOMMU, and DRM options

* tag 'qcom-defconfig-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: qcom_defconfig: Enable Frambuffer console support
  ARM: qcom_defconfig: enable MSM IOMMU for display
  ARM: qcom_defconfig: Enable DRM for 8064 display

Merge tag 'qcom-arm64-defconfig-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM64 Based defconfig Updates for v4.16" from Andy Gross:

* Remove legacy QCOM config options

Merge tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Allwinner arm64 defconfig changes for 4.16

Enables MUSB driver and the Allwinner glue layer driver by default.

All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.

* tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: defconfig: enable MUSB HDRC along with Allwinner glue
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone_config_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/soc

ARM: Keystone configs for 4.16

  - Enable QSPI
  - Enable LEDs
  - Enable GPIO-decoder

* tag 'keystone_config_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: configs: keystone_defconfig: Enable few peripheral drivers
Signed-off-by: Olof Johansson <olof@lixom.net>

This is the pxa changes for v4.16 cycle.

It is :
 - the conversion to the new parser sharpslpart parser
   for the Sharp variants
 - an I2C platform data cleanup for PXA
 - a gpioreg switch of one register for lubbock

* tag 'pxa-for-4.16' of https://github.com/rjarzmik/linux:
  ARM: pxa/lubbock: add GPIO driver for LUB_MISC_WR register
  ARM: pxa/poodle: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa/spitz: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa/tosa: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa/corgi: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa: move header file out of I2C realm
  ARM: pxa: move declarations to proper place
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Two defconfig updates for omaps

These are to configure dra7 PCIe for omap2plus_defconfig and
multi_v7_defconfig.

* tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
  ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Second set of SoC changes for omaps for v4.16 merge window

We can now drop some more of legacy platform data for omap3 as
it's been booting in device tree only mode for quite a while now.
This clock related data is coming from device tree configured
clocks now.

The other changes add support for detecting new dra762 SoC variant.

* tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: dra762: Register package specific hwmod
  ARM: OMAP2+: dra762: Add support for device package identification
  ARM: OMAP2+: Drop unused legacy data for prcm_reg_id and module_bit
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu arm64 for 4.16 (part 1)

Adding the cpu frequency scaling support for Armada 37xx

* tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu:
  arm64: defconfig: enable ARM_ARMADA_37XX_CPUFREQ
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Second Round of Renesas ARM Based SoC Updates for v4.16

* rcar-sysc: Keep wakeup sources active during system suspend

  Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
  CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
  must be kept active during system suspend.

  Currently this is handled in device-specific drivers by explicitly
  increasing the use count of the module clock when the device is
  configured as a wakeup source.  However, the proper way to prevent the
  device from being stopped is to inform this requirement to the genpd
  core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.

  Note that this will only affect devices configured as wakeup sources."

* tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Defconfig Updates for v4.16

shmobile_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
  as a built-in
* Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7
  carrier board, as a built-in

multi_v7_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
  as a module

* tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: defconfig: Enable PWM
  ARM: multi_v7_defconfig: Select PWM_RCAR as module
  ARM: shmobile: defconfig: Enable SGTL5000 audio codec
Signed-off-by: Olof Johansson <olof@lixom.net>

This adds an SoC driver for the Gemini. Currently there
is only one thing not fitting into any other framework,
and that is the bus arbitration setting.

All Gemini vendor trees seem to be setting this register to
exactly the same arbitration so we just add a small code
snippet to do this at subsys_init() time before any other
drivers kick in.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Remove the defintion of mx3_cpu_lp_set(), this function is not
implemented anywhere. Remove then mx3_cpu_pwr_mode enum as well,
it was used only as parameter of mx3_cpu_lp_set().
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The power saving status bit will not signal if the MMDC is under load,
which is likely during kernel boot. There is no point in checking this
bit and aborting the probe, as there is nothing depending on power
saving being enabled, so we can trust the memory controller to enable
power saving when we allow it.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable SRTC driver for i.MX53 in default config
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This patch adds the missing configs for the DART-MX6 SoM support :
- SERDEV bluetooth driver + SERIAL_DEV_BUS configs
- WL18XX driver
- DEFAULT_ON Led Trigger
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Fix ptr_ret.cocci warnings:
arch/arm/mach-davinci/devices-da8xx.c:255:8-14: WARNING: PTR_ERR_OR_ZERO can be used
arch/arm/mach-davinci/devices-da8xx.c:300:8-14: WARNING: PTR_ERR_OR_ZERO can be used
arch/arm/mach-davinci/dm646x.c:952:8-14: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Make davinci_soc_info structures const as they are either passed to the
function davinci_common_init having the argument as const or their field
cpu_clks of type struct clk_lookup * is passed to the function
davinci_clk_init.

So, the fields are never modified and the structures can be const.

Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
[nsekhar@ti.com: minor commit message adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Make the function argument of the function davinci_common_init
as const as it's memory contents are only copied during a
memcpy call. So, the fields of the structure to which the argument
soc_info points to never gets modified and therefore the argument can
be made const.
Add const to the prototype too.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Revert changes introduced by commit f0fbe7bc ("gpio: Move irqdomain
into struct gpio_irq_chip") as they are not aplicable to this driver.
Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Fixes: f0fbe7bc ("gpio: Move irqdomain into struct gpio_irq_chip")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds framebuffer console support to qcom defconfig.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

MSM IOMMU is required for apq8064 display, so enable it by default.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This enables DRM Kconfig for apq8064 display.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver
support any more.  Remove the code, and remove the config option
from the arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

No Qualcomm SoC requires the "phy-msm-usb.c" USB phy driver support
any more.  Remove the code, and remove the config option from the
arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

No Qualcomm SoC requires the "ehci-msm.c" code any more.  So remove
the code, and remove the config option from the arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Merge tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/soc

Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger:

- change kconfig entry for armv7 SoCs to be more generic
- add support for mt2701 scpsys driver
  binding documentation
  extend driver to allow the bus protection to overwrite the register

* tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: add MT2712 scpsys support
  soc: mediatek: add dependent clock jpgdec/audio for scpsys
  soc: mediatek: extend bus protection API
  dt-bindings: soc: add MT2712 power dt-bindings
  ARM: mediatek: use more generic prompts for SoCs with ARMv7

Merge tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Pull "soc/tegra: Changes for v4.16-rc1" from Thierry Reding:

Fuse and chip ID support for Tegra186 is added in this set of changes,
followed by some unification work for the PMC driver in order to avoid
code duplication between Tegra186 and prior chips.

This also contains a couple of fixes for reading fuses on Tegra20.

* tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: fuse: Explicitly request DMA channel from APB DMA driver
  soc/tegra: fuse: Fix reading registers using DMA on Tegra20
  soc/tegra: pmc: Consolidate Tegra186 support
  soc/tegra: pmc: Parameterize driver
  soc/tegra: fuse: Add Tegra186 chip ID support
  soc/tegra: fuse: Warn if accessing unmapped registers
  soc/tegra: fuse: Move register mapping check
  soc/tegra: fuse: Add Tegra186 support
  dt-bindings: misc: Add Tegra186 MISC registers bindings

Merge tag 'samsung-defconfig-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung defconfig changes for v4.16" from Krzysztof Kozłowski:

1. Enable missing drivers for supported Exynos boards (PMU, CEC, MHL
   bridge, ASoC for Odroid XU3/XU4).
2. Enable Exynos IOMMU driver on exynos_defconfig.

* tag 'samsung-defconfig-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos_defconfig: Enable CONFIG_EXYNOS_IOMMU
  ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards
  ARM: exynos_defconfig: Enable missing drivers for supported Exynos boards

Merge tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "One old minor pull request pending" from Tony Lindgren:

Few omap2plus_defconfig changes for v4.15 merge window to enable NEON
based crypto and droid 4 USB PHY.

* tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Enable droid 4 USB PHY
  ARM: omap2plus_defconfig: enable NEON based crypto

Merge tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "SoC changes for omaps for v4.16 merge window" from Tony Lindgren:

For most part this is a series from Tero Kristo to prepare things
for using clkctrl clocks with DTS data. The other changes are to
make few data structures const.

* tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: CM: make cm_ll_data structures as const
  ARM: OMAP2+: CM: make some pointers and function arguments as const
  ARM: DM816x: hwmod_data: fix clockdomain name for sata hwmod
  ARM: OMAP2+: hwmod: calculate physical register address on am33xx
  ARM: AM33xx: CM: add support for getting physical address for a register
  ARM: OMAP2+: clockdomain: remove the obsolete clkdm_xlate_address API
  ARM: OMAP2+: hwmod: fix clkctrl address translation logic
  ARM: OMAP4: CMINST: add support for translating clkctrl addresses
  ARM: OMAP2+: CM: add support for getting phys address for a clkctrl register

Pull "ARM: ep93xx: ts72xx: Add support for BK3 board" from Alexander Sverdlin:

This patch series adds support for Liebherr's BK3 board, being
a derivative of TS72XX design.

* tag 'bk3' of https://github.com/sverdlin/ep93xx:
  ARM: ep93xx: ts72xx: Add support for BK3 board - ts72xx derivative
  ARM: ep93xx: ts72xx: cosmetic: Add some description to ts72xx code
  ARM: ep93xx: ts72xx: Rewrite ts72xx_register_flash() to accept parameters
  ARM: ep93xx: ts72xx: Provide include guards for ts72xx.h file

Currently fuse driver requests DMA channel from an arbitrary DMA device,
it is not a problem since there is only one DMA provider for Tegra20 yet,
but it may become troublesome if another provider will appear.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>