- 06 Jul, 2020 3 commits
-
-
Adrian Hunter authored
After recording PEBS-via-PT, perf script will not accept 'iregs' field e.g. # perf record -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data ] # ./perf script --itrace=eop -F+iregs Samples for 'dummy:u' event do not have IREGS attribute set. Cannot print 'iregs' field. Fix by using allow_user_set, which is true when recording AUX area data. Fixes: 9e64cefe ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by:Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Luwei Kang <luwei.kang@intel.com> Link: http://lore.kernel.org/lkml/20200630133935.11150-3-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
When recording PEBS-via-PT, the kernel will not accept the intel_pt event with register sampling e.g. # perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l Error: intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fix by suppressing register sampling on the intel_pt evsel. Committer notes: Adrian informed that this is only available from Tremont onwards, so on older processors the error continues the same as before. Fixes: 9e64cefe ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by: -
Wei Li authored
The segmentation fault can be reproduced as following steps: 1) Executing perf report in tui. 2) Typing '/xxxxx' to filter the symbol to get nothing matched. 3) Pressing enter with no entry selected. Then it will report a segmentation fault. It is caused by the lack of check of browser->he_selection when accessing it's member res_samples in perf_evsel__hists_browse(). These processes are meaningful for specified samples, so we can skip these when nothing is selected. Fixes: 4968ac8f ("perf report: Implement browsing of individual samples") Signed-off-by:
Wei Li <liwei391@huawei.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
- 03 Jul, 2020 17 commits
-
-
Tom Zanussi authored
Kernel commit dc4e2801 (ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP) changed the way the ring buffer timestamps work - after that commit the previously unimplemented RINGBUF_TYPE_TIME_STAMP type causes the time delta to be used as a timestamp rather than a delta to be added to the timestamp. The trace-cmd code didn't get updated to handle this, so misinterprets the event data for this case, which causes a cascade of errors, including trace-report not being able to identify synthetic (or any other) events generated by the histogram code (which uses TIME_STAMP mode). For example, the following triggers along with the trace-cmd shown cause an UNKNOWN_EVENT error and trace-cmd report crash: # echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).trace(wakeup_latency,$wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger # trace-cmd record -e wakeup_latency -e sched_wakeup -f comm==\"ping\" ping localhost -c 5 # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 ug! no event found for type 0 [UNKNOWN TYPE 0] ug! no event found for type 11520 Segmentation fault (core dumped) After this patch we get the correct interpretation and the events are shown properly: # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 <idle>-0 [004] 23284.341392: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23284.341464: wakeup_latency: lat=58, pid=12031, comm=ping <idle>-0 [004] 23285.365303: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23285.365382: wakeup_latency: lat=64, pid=12031, comm=ping <idle>-0 [004] 23286.389290: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23286.389378: wakeup_latency: lat=72, pid=12031, comm=ping <idle>-0 [004] 23287.413213: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23287.413291: wakeup_latency: lat=64, pid=12031, comm=ping Link: http://lkml.kernel.org/r/1567628224.13841.4.camel@kernel.org Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-3-tz.stoyanov@gmail.comSigned-off-by:
Tom Zanussi <zanussi@kernel.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.785094515@goodmis.orgSigned-off-by:
Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
Add the functions kbuffer_subbuf_timestamp() and kbuffer_ptr_delta() to get the timing data stored in the ring buffer that is used to produced the time stamps of the records. This is useful for tools like trace-cmd to be able to display the content of the read data to understand why the records show the time stamps that they do. Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-2-tz.stoyanov@gmail.comSigned-off-by:
-
Adrian Hunter authored
Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Charts -> Time chart by CPU Move mouse over middle of chart Right-click and select Show Call Tree Before: displays Call Tree but not expanded to selected time After: displays Call Tree expanded to selected time Fixes: e69d5df7 ("perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time") Signed-off-by:
-
Adrian Hunter authored
Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Call Tree Press: Ctrl-F Enter: unknown Press: Enter Before: displays 'unknown' not found After: tree is expanded to line showing 'unknown' Fixes: ae8b887c ("perf scripts python: exported-sql-viewer.py: Add call tree") Signed-off-by: -
Adrian Hunter authored
Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph Press: Ctrl-F Enter: unknown Press: Enter Before: gets stuck After: tree is expanded to line showing 'unknown' Fixes: 254c0d82 ("perf scripts python: exported-sql-viewer.py: Factor out CallGraphModelBase") Signed-off-by: -
Adrian Hunter authored
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find') would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree Press: Ctrl-F Enter: main Press: Enter Before: line showing 'main' does not display After: tree is expanded to line showing 'main' Fixes: ebd70c7d ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph") Signed-off-by: -
Adrian Hunter authored
Commit 0a892c1c ("perf record: Add dummy event during system wide synthesis") reveals an issue with Intel PT system wide tracing. Specifically that Intel PT already adds a dummy tracking event, and it is not the first event. Adding another dummy tracking event causes duplicated sideband events. Fix by checking for an existing dummy tracking event first. Example showing duplicated switch events: Before: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.895 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [007] 6390.516223: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516224: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [002] 6390.516415: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 swapper 0 [002] 6390.516416: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 After: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.868 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [005] 6450.567013: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 7179/7181 perf 7181 [005] 6450.567014: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 perf 7181 [005] 6450.567028: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.567029: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 7179/7181 swapper 0 [005] 6450.571699: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.571700: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [005] 6450.571702: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.571703: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [005] 6450.579703: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.579704: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 Signed-off-by:
-
Adrian Hunter authored
Python 3.8 is requiring that arguments being packed as integers are also integers. Add int() accordingly. Before: $ perf record -e intel_pt//u uname $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:10.547256 Creating database... 2020-06-25 16:09:10.733185 Writing to intermediate files... Traceback (most recent call last): File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1106, in synth_data cbr(id, raw_buf) File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1058, in cbr value = struct.pack("!hiqiiiiii", 4, 8, id, 4, cbr, 4, MHz, 4, percent) struct.error: required argument is not an integer Fatal Python error: problem in Python trace event handler Python runtime state: initialized Current thread 0x00007f35d3695780 (most recent call first): <no Python frame> Aborted (core dumped) After: $ dropdb perf_data_db $ rm -rf perf_data_db-perf-data $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:40.990267 Creating database... 2020-06-25 16:09:41.207009 Writing to intermediate files... 2020-06-25 16:09:41.270915 Copying to database... 2020-06-25 16:09:41.382030 Removing intermediate files... 2020-06-25 16:09:41.384630 Adding primary keys 2020-06-25 16:09:41.541894 Adding foreign keys 2020-06-25 16:09:41.677044 Dropping unused tables 2020-06-25 16:09:41.703761 Done Fixes: aba44287 ("perf scripts python: export-to-postgresql.py: Export Intel PT power and ptwrite events") Signed-off-by: -
Arnaldo Carvalho de Melo authored
To bring in the change made in this cset: e3a9e681 ("x86/entry: Fixup bad_iret vs noinstr") This doesn't cause any functional changes to tooling, just a rebuild. Addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To synchronize UAPI headers. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu mm fixes from Greg Ungerer: "Two critical mm related fixes that affect booting of m68k/ColdFire devices. Both fix problems caused by recent system init memblock changes" * tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: mm: fix node memblock init m68k: nommu: register start of the memory with memblock
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Sync dtc to upstream to pick up fixes for I2C bus checks and quiet warnings - Various fixes for DT binding check warnings - A couple of build fixes/improvements for binding checks - ReST formatting improvements for writing-schema.rst - Document reference fixes * tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clock: imx: Fix e-mail address dt-bindings: thermal: k3: Fix the reg property dt-bindings: thermal: Remove soc unit address dt-bindings: display: arm: versatile: Pass the sysreg unit name dt-bindings: usb: aspeed: Remove the leading zeroes dt-bindings: copy process-schema-examples.yaml to process-schema.yaml dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check' dt-bindings: fix error in 'make clean' after 'make dt_binding_check' dt-bindings: mailbox: zynqmp_ipi: fix unit address dt-bindings: bus: uniphier-system-bus: fix warning in example scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c doc: devicetree: bindings: fix spelling mistake docs: dt: minor adjustments at writing-schema.rst dt: fix reference to olpc,xo1.75-ec.txt dt: Fix broken references to renamed docs dt: fix broken links due to txt->yaml renames dt: update a reference for reneases pcar file renamed to yaml
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull data race annotation from Christian Brauner: "This contains an annotation patch for a data race in copy_process() reported by KCSAN when reading and writing nr_threads. The data race is intentional and benign. This is obvious from the comment above the relevant code and based on general consensus when discussing this issue. So simply using data_race() to annotate this as an intentional race seems the best option" * tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fork: annotate data race in copy_process()
-
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "These are just fixes for bugs found lately. All of them are small scale things here and there, and all of them are for previous kernel releases (the oldest appeared in v2.6.17)" * tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm_tis: Remove the HID IFX0102 tpm_tis_spi: Prefer async probe tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes tpm/st33zp24: fix spelling mistake "drescription" -> "description" tpm_tis: extra chip->ops check on error path in tpm_tis_core_init tpm_tis_spi: Don't send anything during flow control tpm: Fix TIS locality timeout problems
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "tpm test fixes from Jarkko Sakkinen" * tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: tpm: Use /bin/sh instead of /bin/bash selftests: tpm: Use 'test -e' instead of 'test -f' Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan "Fixes for build and run-times failures. Also includes troubleshooting tips updates to kunit user documentation" * tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: kunit: Add some troubleshooting tips to the FAQ kunit: kunit_tool: Fix invalid result when build fails kunit: show error if kunit results are not present kunit: kunit_config: Fix parsing of CONFIG options with space
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Fixes for a umask bug on exported filesystems lacking ACL support, a leak and a module unloading bug in the /proc/fs/nfsd/clients/ code, and a compile warning" * tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux: SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE nfsd: fix nfsdfs inode reference count leak nfsd4: fix nfsdfs reference count loop nfsd: apply umask on fs without ACL support
-
- 02 Jul, 2020 9 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Use kvfree_sensitive() for the block keyslot free (Eric) - Sync blk-mq debugfs flags (Hou) - Memory leak fix in virtio-blk error path (Hou) * tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block: virtio-blk: free vblk-vqs in error path of virtblk_probe() block/keyslot-manager: use kvfree_sensitive() blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "One fix in here, for a regression in 5.7 where a task is waiting in the kernel for a condition, but that condition won't become true until task_work is run. And the task_work can't be run exactly because the task is waiting in the kernel, so we'll never make any progress. One example of that is registering an eventfd and queueing io_uring work, and then the task goes and waits in eventfd read with the expectation that it'll get woken (and read an event) when the io_uring request completes. The io_uring request is finished through task_work, which won't get run while the task is looping in eventfd read" * tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block: io_uring: use signal based task_work running task_work: teach task_work_add() to do signal_wake_up()
-
Jarkko Sakkinen authored
Acer C720 running Linux v5.3 reports this in klog: tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16) tpm tpm0: tpm_try_transmit: send(): error -5 tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts tpm_tis tpm_tis: Could not get TPM timeouts and durations tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) tpm tpm0: tpm_try_transmit: send(): error -5 tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts tpm_tis 00:08: Could not get TPM timeouts and durations ima: No TPM chip found, activating TPM-bypass! tpm_inf_pnp 00:08: Found TPM with ID IFX0102 % git --no-pager grep IFX0102 drivers/char/tpm drivers/char/tpm/tpm_infineon.c: {"IFX0102", 0}, drivers/char/tpm/tpm_tis.c: {"IFX0102", 0}, /* Infineon */ Obviously IFX0102 was added to the HID table for the TCG TIS driver by mistake. Fixes: 93e1b7d4 ("[PATCH] tpm: add HID module parameter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877 Cc: stable@vger.kernel.org Cc: Kylene Jo Hall <kjhall@us.ibm.com> Reported-by:Ferry Toth: <ferry.toth@elsinga.info> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-
Douglas Anderson authored
On a Chromebook I'm working on I noticed a big (~1 second) delay during bootup where nothing was happening. Right around this big delay there were messages about the TPM: [ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2 [ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ... I put a few printouts in and saw that tpm_tis_spi_init() (specifically tpm_chip_register() in that function) was taking the lion's share of this time, though ~115 ms of the time was in cr50_print_fw_version(). Let's make a one-line change to prefer async probe for tpm_tis_spi. There's no reason we need to block other drivers from probing while we load. NOTES: * It's possible that other hardware runs through the init sequence faster than Cr50 and this isn't such a big problem for them. However, even if they are faster they are still doing _some_ transfers over a SPI bus so this should benefit everyone even if to a lesser extent. * It's possible that there are extra delays in the code that could be optimized out. I didn't dig since once I enabled async probe they no longer impacted me. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
David Gibson authored
The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued, which will need the use of the internal command/response buffer. But, we're issuing this *before* we've waited to make sure that buffer is allocated. This can result in intermittent failures to probe if the hypervisor / TPM implementation doesn't respond quickly enough. I find it fails almost every time with an 8 vcpu guest under KVM with software emulated TPM. To fix it, just move the tpm2_get_cc_attrs_tlb() call after the existing code to wait for initialization, which will ensure the buffer is allocated. Fixes: 18b3670d ("tpm: ibmvtpm: Add support for TPM2") Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Reviewed-by:
-
Binbin Zhou authored
Trivial fix, the spelling of "drescription" is incorrect in function comment. Fix this. Signed-off-by:
Binbin Zhou <zhoubinbin@uniontech.com> Acked-by:
-
Vasily Averin authored
Found by smatch: drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn: variable dereferenced before check 'chip->ops' (see line 979) 'chip->ops' is assigned in the beginning of function in tpmm_chip_alloc->tpm_chip_alloc and is used before first possible goto to error path. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Reviewed-by:
-
Douglas Anderson authored
During flow control we are just reading from the TPM, yet our spi_xfer has the tx_buf and rx_buf both non-NULL which means we're requesting a full duplex transfer. SPI is always somewhat of a full duplex protocol anyway and in theory the other side shouldn't really be looking at what we're sending it during flow control, but it's still a bit ugly to be sending some "random" data when we shouldn't. The default tpm_tis_spi_flow_control() tries to address this by setting 'phy->iobuf[0] = 0'. This partially avoids the problem of sending "random" data, but since our tx_buf and rx_buf both point to the same place I believe there is the potential of us sending the TPM's previous byte back to it if we hit the retry loop. Another flow control implementation, cr50_spi_flow_control(), doesn't address this at all. Let's clean this up and just make the tx_buf NULL before we call flow_control(). Not only does this ensure that we're not sending any "random" bytes but it also possibly could make the SPI controller behave in a slightly more optimal way. NOTE: no actual observed problems are fixed by this patch--it's was just made based on code inspection. Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by:
-
James Bottomley authored
It has been reported that some TIS based TPMs are giving unexpected errors when using the O_NONBLOCK path of the TPM device. The problem is that some TPMs don't like it when you get and then relinquish a locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without sending a command. This currently happens all the time in the O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops() further down the code to after the O_NONBLOCK determination is made. This is safe because the priv->buffer_mutex still protects the priv state being modified. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275 Fixes: d23d1248 ("tpm: fix invalid locking in NONBLOCKING mode") Reported-by:
Mario Limonciello <Mario.Limonciello@dell.com> Tested-by:
Alex Guzman <alex@guzman.io> Cc: stable@vger.kernel.org Reviewed-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by:
-
- 01 Jul, 2020 3 commits
-
-
Fabio Estevam authored
The freescale.com domain is gone for quite some time. Use the nxp.com domain instead. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200701005346.1008-1-festevam@gmail.comSigned-off-by:
Rob Herring <robh@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull hyperv fix from Wei Liu: "One patch from Joseph to make panic reporting contain more useful information" * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: Change flag to write log level in panic msg to false
-
Hou Tao authored
Else there will be memory leak if alloc_disk() fails. Fixes: 6a27b656 ("block: virtio-blk: support multi virt queues per virtio-blk device") Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 30 Jun, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat fixes from Namjae Jeon: - Zero out unused characters of FileName field to avoid a complaint from some fsck tool. - Fix memory leak on error paths. - Fix unnecessary VOL_DIRTY set when calling rmdir on non-empty directory. - Call sync_filesystem() for read-only remount (Fix generic/452 test in xfstests) - Add own fsync() to flush dirty metadata. * tag 'exfat-for-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: flush dirty metadata in fsync exfat: move setting VOL_DIRTY over exfat_remove_entries() exfat: call sync_filesystem for read-only remount exfat: add missing brelse() calls on error paths exfat: Set the unused characters of FileName field to the value 0000h
-
Linus Torvalds authored
Merge tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: "Two simple fixes for v5.8: - Fix hook iteration and default value for inode_copy_up_xattr (KP Singh) - Fix the key_permission LSM hook function type (Sami Tolvanen)" * tag 'fixes-v5.8-rc3-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: Fix hook iteration and default value for inode_copy_up_xattr security: fix the key_permission LSM hook function type
-
Linus Torvalds authored
Merge tag 'integrity-v5.8-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "Include PCRs 8 & 9 in per TPM 2.0 bank boot_aggregate calculation. Prior to Linux 5.8 the SHA1 "boot_aggregate" value was padded with 0's and extended into the other TPM 2.0 banks. Included in the Linux 5.8 open window, TPM 2.0 PCR bank specific "boot_aggregate" values (PCRs 0 - 7) are calculated and extended into the TPM banks. Distro releases are now shipping grub2 with TPM support, which extend PCRs 8 & 9. I'd like for PCRs 8 & 9 to be included in the new "boot_aggregate" calculations. For backwards compatibility, if the hash is SHA1, these new PCRs are not included in the boot aggregate" * tag 'integrity-v5.8-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: extend boot_aggregate with kernel measurements
-
Jens Axboe authored
Since 5.7, we've been using task_work to trigger async running of requests in the context of the original task. This generally works great, but there's a case where if the task is currently blocked in the kernel waiting on a condition to become true, it won't process task_work. Even though the task is woken, it just checks whatever condition it's waiting on, and goes back to sleep if it's still false. This is a problem if that very condition only becomes true when that task_work is run. An example of that is the task registering an eventfd with io_uring, and it's now blocked waiting on an eventfd read. That read could depend on a completion event, and that completion event won't get trigged until task_work has been run. Use the TWA_SIGNAL notification for task_work, so that we ensure that the task always runs the work when queued. Cc: stable@vger.kernel.org # v5.7 Signed-off-by: -
Oleg Nesterov authored
So that the target task will exit the wait_event_interruptible-like loop and call task_work_run() asap. The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the new TWA_SIGNAL flag implies signal_wake_up(). However, it needs to avoid the race with recalc_sigpending(), so the patch also adds the new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK. TODO: once this patch is merged we need to change all current users of task_work_add(notify = true) to use TWA_RESUME. Cc: stable@vger.kernel.org # v5.7 Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Fabio Estevam authored
Adjust the reg property to fix the following warning seen with 'make dt_binding_check': Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long Signed-off-by:
-
Fabio Estevam authored
Remove the soc unit address to fix the following warnings seen with 'make dt_binding_check': Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/thermal/thermal-zones.example.dts:23.20-50.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Signed-off-by:
-
Fabio Estevam authored
Pass the sysreg unit name to fix the following warning seen with 'make dt_binding_check': Warning (unit_address_vs_reg): /example-0/sysreg: node has a reg or ranges property, but no unit name Signed-off-by:
-
