- 05 Jun, 2018 1 commit
-
-
Josh Poimboeuf authored
commit d1091c7f upstream. The BUG() macro's use of __builtin_unreachable() via the unreachable() macro tells gcc that the instruction is a dead end, and that it's safe to assume the current code path will not execute past the previous instruction. On x86, the BUG() macro is implemented with the 'ud2' instruction. When objtool's branch analysis sees that instruction, it knows the current code path has come to a dead end. Peter Zijlstra has been working on a patch to change the WARN macros to use 'ud2'. That patch will break objtool's assumption that 'ud2' is always a dead end. Generally it's best for objtool to avoid making those kinds of assumptions anyway. The more ignorant it is of kernel code internals, the better. So create a more generic way for objtool to detect dead ends by adding an annotation to the unreachable() macro. The annotation stores a pointer to the end of the unreachable code path in an '__unreachable' section. Objtool can read that section to find the dead ends. Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/41a6d33971462ebd944a1c60ad4bf5be86c17b77.1487712920.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 30 May, 2018 39 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit d82309e2 which is 03080e5e ("vti4: Don't override MTU passed on link creation via IFLA_MTU") upstream as it causes test failures. This commit should not have been backported to anything older than 4.16, despite what the changelog said as the mtu must be set in older kernels, unlike is needed in 4.16 and newer. Thanks to Alistair Strachan for the debugging help figuring this out, and for 'git bisect' for making my life a whole lot easier. Cc: Alistair Strachan <astrachan@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Randy Dunlap authored
[ Upstream commit 1e0ce03b ] The "mdr" command should repeat (continue) when only Enter/Return is pressed, so make it do so. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Bjorn Andersson authored
[ Upstream commit a7aa75a2 ] The base of the TLMM gpiochip should not be statically defined as 0, fix this to not artificially restrict the existence of multiple pinctrl-msm devices. Fixes: f365be09 ("pinctrl: Add Qualcomm TLMM driver") Reported-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 30966861 ] If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must release the reference on the current 'child' node before returning. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit d4b78db6 ] The HDMI encoder is connected to the RGB output of the DU, which is port@0, not port@1. Fix the incorrect DT description. Fixes: c5af8a42 ("ARM: dts: porter: add DU DT support") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Aapo Vienamo authored
[ Upstream commit 2bada7ac ] The missing last digit of the CONFIG values is added. Looks like a typo of some sort when comparing to the downstream dt. This fixes intermittent behavior behaviour of the ethernet controllers. Signed-off-by:
Aapo Vienamo <aapo@tuxera.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 71df1793 ] The cache pointer points to the actual memory used by the cache, as the comparison here is looking for the type of the cache it should check against cache_type. Fixes: 1ea975cf ("regmap: Add a function to check if a regmap register is cached") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Richard Haines authored
[ Upstream commit 213d7f94 ] When resolving a fallback label, check the sk_buff version as it is possible (e.g. SCTP) to have family = PF_INET6 while receiving ip_hdr(skb)->version = 4. Signed-off-by:
Richard Haines <richard_c_haines@btinternet.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Prashant Bhole authored
[ Upstream commit ddd00103 ] eBPF test fails due to verifier failure because log_buf is too small. Fixed by increasing log_buf size Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit e3ebaa46 ] Jin Yao reported memory corrupton in perf report with branch info used for stack trace: > Following command lines will cause perf crash. > perf record -j call -g -a <application> > perf report --branch-history > > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 *** > ======= Backtrace: ========= > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725] > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a] > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc] > perf[0x51b914] > perf(hist_entry_iter__add+0x1e5)[0x51f305] > perf[0x43cf01] > perf[0x4fa3bf] > perf[0x4fa923] > perf[0x4fd396] > perf[0x4f9614] > perf(perf_session__process_events+0x89e)[0x4fc38e] > perf(cmd_report+0x15d2)[0x43f202] > perf[0x4a059f] > perf(main+0x631)[0x427b71] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830] > perf(_start+0x29)[0x427d89] For the cumulative output, we allocate the he_cache array based on the --max-stack option value and populate it with data from 'callchain_cursor'. The --max-stack option value does not ensure now the limit for number of callchain_cursor nodes, so the cumulative iter code will allocate smaller array than it's actually needed and cause above corruption. I think the --max-stack limit does not apply here anyway, because we add callchain data as normal hist entries, while the --max-stack control the limit of single entry callchain depth. Using the callchain_cursor.nr as he_cache array count to fix this. Also removing struct hist_entry_iter::max_stack, because there's no longer any use for it. We need more fixes to ensure that the branch stack code follows properly the logic of --max-stack, which is not the case at the moment. Original-patch-by:
Jin Yao <yao.jin@linux.intel.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit ab6e9a99 ] The symbol search called by machine__find_kernel_symbol_by_name is using internally arch__compare_symbol_names function to compare 2 symbol names, because different archs have different ways of comparing symbols. Mostly for skipping '.' prefixes and similar. In test 1 when we try to find matching symbols in kallsyms and vmlinux, by address and by symbol name. When either is found we compare the pair symbol names by simple strcmp, which is not good enough for reasons explained in previous paragraph. On powerpc this can cause lockup, because even thought we found the pair, the compared names are different and don't match simple strcmp. Following code path is executed, that leads to lockup: - we find the pair in kallsyms by sym->start next_pair: - we compare the names and it fails - we find the pair by sym->name - the pair addresses match so we call goto next_pair because we assume the names match in this case Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Baoquan He authored
[ Upstream commit bee3204e ] Currently the kdump kernel becomes very slow if 'noapic' is specified. Normal kernel doesn't have this bug. Kernel parameter 'noapic' is used to disable IO-APIC in system for testing or special purpose. Here the root cause is that in kdump kernel LAPIC is disabled since commit: 522e6646 ("x86/apic: Disable I/O APIC before shutdown of the local APIC") In this case we need set up through-local-APIC on boot CPU in setup_local_APIC(). In normal kernel the legacy irq mode is enabled by the BIOS. If it is virtual wire mode, the local-APIC has been enabled and set as through-local-APIC. Though we fixed the regression introduced by commit 522e6646, to further improve robustness set up the through-local-APIC mode explicitly, do not rely on the default boot IRQ mode. Signed-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-7-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by:
-
Ørjan Eide authored
[ Upstream commit 57de50af ] When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Ørjan Eide <orjan.eide@arm.com> Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Joe Perches authored
[ Upstream commit db6775ca ] Using a period after a newline causes bad output. Fixes: 64b139f9 ("MIPS: OCTEON: irq: add CIB and other fixes") Signed-off-by:
Joe Perches <joe@perches.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17886/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Takeshi Kihara authored
[ Upstream commit b418c460 ] This patch fixes MOD_SEL1 bit20 and MOD_SEL2 bit20, bit21 pin assignment for SSI pins group. This is a correction to the incorrect implementation of MOD_SEL register pin assignment for R8A7796 SoC specification of R-Car Gen3 Hardware User's Manual Rev.0.51E or later. Fixes: f9aece73 ("pinctrl: sh-pfc: Initial R8A7796 PFC support") Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
-
Richard Guy Briggs authored
[ Upstream commit 23138ead ] If there is a memory allocation error when trying to change an audit kernel feature value, the ignored allocation error will trigger a NULL pointer dereference oops on subsequent use of that pointer. Return instead. Passes audit-testsuite. See: https://github.com/linux-audit/audit-kernel/issues/76Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> [PM: not necessary (other funcs check for NULL), but a good practice] Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 79c81fac ] Since 517e7a15 ("ASoC: bcm2835: move to use the clock framework") the bcm2835-i2s requires a clock as DT property. Unfortunately the necessary DT change has never been applied. While we are at it also fix the first PCM register range to cover the PCM_GRAY register. Fixes: 517e7a15 ("ASoC: bcm2835: move to use the clock framework") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Tested-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 116e5258 ] Currently when UDF filesystem is recorded without uid / gid (ids are set to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid= and gid= mount options. In such case filesystem could not be modified in any way as VFS refuses to modify files with invalid ids (even by root). This is confusing to users and not very useful default since such media mode is generally used for removable media. Use overflow[ug]id instead so that at least root can modify the filesystem. Reported-by:
Steve Kenton <skenton@ou.edu> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Thomas Vincent-Cross authored
[ Upstream commit 832e4e1f ] Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679Signed-off-by:
Thomas Vincent-Cross <me@tvc.id.au> Signed-off-by:
Bjorn Helgaas <helgaas@kernel.org> Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit b24b6478 ] Ideally the de-allocation of resources should happen in the exact opposite order in which they were allocated. It helps maintain the code in long term, even if nothing really breaks with incorrect ordering. That wasn't followed in cpufreq_online() and it has some inconsistencies. For example, the symlinks were created from within the locked region while they are removed only after putting the locks. Also ->exit() should have been called only after the symlinks are removed and the lock is dropped, as that was the case when ->init() was first called. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 15d2ee42 ] A dma_wmb() is used to guarantee the ordering, with respect to other writes, to cache coherent DMA memory. There is a dma_wmb() in prepare_tx_desc()/prepare_tso_tx_desc() which ensures that TDES0/1/2 is written before TDES3 (which contains the own bit), for First Desc. However, in the rare case that MSS changes, there will be a MSS context descriptor in front of the regular DMA descriptors: <MSS desc> <- DMA Next Descriptor <First Desc> <desc n> <Last Desc> Thus, for this special case, we need a dma_wmb() after prepare_tso_tx_desc()/before writing the own bit to the MSS desc, so that we flush the write to TDES3 for First Desc, in order to ensure that the MSS descriptor is the last descriptor to set the own bit. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit a6b25da5 ] According to Documentation/memory-barriers.txt, we need to use a dma_rmb() after reading the status/own bit, to ensure that all descriptor fields are read after reading the own bit. This way, we ensure that the DMA engine is done with the DMA descriptor before we read the other descriptor fields, e.g. reading the tx hardware timestamp (if PTP is enabled). Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 48d163b1 ] When Linux is master of BAM, it can directly read registers to know number of supported channels, however when its remotely controlled reading these registers would trigger a crash if the BAM is not yet initialized or powered up on the remote side. This patch allows driver to read num-channels and num-ees from Device Tree for remotely controlled BAM. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
lionel.debieve@st.com authored
[ Upstream commit 326ed382 ] Avoid issue when probing the RNG without reset if bad status has been detected previously Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit e8588e26 ] rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 3e081628 ] This patch fixes an issue that a race condition happens between a client driver and the rcar-dmac driver: - The rcar_dmac_isr_transfer_end() is called. - The done list appears, and desc.running is the next active list. - rcar_dmac_chan_get_residue() is called by a client driver before rcar_dmac_isr_channel_thread() is called. - The rcar_dmac_chan_get_residue() will not find any descriptors. - And, the following WARNING happens: WARN(1, "No descriptor for cookie!"); The sh-sci driver with HSCIF (921,600bps) on R-Car H3 can cause this situation. So, this patch checks the done lists in rcar_dmac_chan_get_residue() and returns zero if the done lists has the argument cookie. Tested-by:
Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Qi Hou authored
[ Upstream commit a3ca8312 ] When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by:
Frank Mori Hess <fmh6jj@gmail.com> Tested-by:
Qi Hou <qi.hou@windriver.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 2e2c177c ] In slave_update() of vmaster code ignores the error from the slave get() callback and copies the values. It's not only about the missing error code but also that this may potentially lead to a leak of uninitialized variables when the slave get() don't clear them. This patch fixes slave_update() not to copy the potentially uninitialized values when an error is returned from the slave get() callback, and to propagate the error value properly. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ivan Gorinov authored
[ Upstream commit 0a5169ad ] IRQ parameters for the SoC devices connected directly to I/O APIC lines (without PCI IRQ routing) may be specified in the Device Tree. Called from DT IRQ parser, irq_create_fwspec_mapping() calls irq_domain_alloc_irqs() with a pointer to irq_fwspec structure as @arg. But x86-specific DT IRQ allocation code casts @arg to of_phandle_args structure pointer and crashes trying to read the IRQ parameters. The function was not converted when the mapping descriptor was changed to irq_fwspec in the generic irqdomain code. Fixes: 11e4438e ("irqdomain: Introduce a firmware-specific IRQ specifier structure") Signed-off-by:
Ivan Gorinov <ivan.gorinov@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: https://lkml.kernel.org/r/a234dee27ea60ce76141872da0d6bdb378b2a9ee.1520450752.git.ivan.gorinov@intel.comSigned-off-by:
-
Ivan Gorinov authored
[ Upstream commit 628df9dc ] Commit 08d53aa5 added CRC32 calculation in early_init_dt_verify() and checking in late initcall of_fdt_raw_init(), making early_init_dt_verify() mandatory. The required call to early_init_dt_verify() was not added to the x86-specific implementation, causing failure to create the sysfs entry in of_fdt_raw_init(). Fixes: 08d53aa5 ("of/fdt: export fdt blob as /sys/firmware/fdt") Signed-off-by:
-
Andreas Gruenbacher authored
[ Upstream commit 174d1232 ] The chunk size of allocations in __gfs2_fallocate is calculated incorrectly. The size can collapse, causing __gfs2_fallocate to allocate one block at a time, which is very inefficient. This needs fixing in two places: In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate that there is no quota limit. This fixes callers that rely on ap->allowed to be set even when quotas are off. In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the loop to make sure that allocation limits from one resource group won't spill over into another resource group. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Bjorn Andersson authored
[ Upstream commit 90c29ed7 ] hdr.len includes both the size of the header and the fragment, so using this when stepping through the firmware causes us to skip 16 bytes every chunk of 3072 bytes; causing only the first fragment to actually be valid data. Instead use fragment size steps through the firmware blob. Fixes: ea7a1f27 ("soc: qcom: Introduce WCNSS_CTRL SMD client") Reported-by:
Will Newton <will.newton@gmail.com> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Ilia Lin authored
[ Upstream commit e723795c ] Set correct clocks and interrupt values. Fixes the incorrect SPI master configuration. This is mandatory to make the SPI5 interface functional. Signed-off-by:
Ilia Lin <ilialin@codeaurora.org> Signed-off-by:
-
Kan Liang authored
[ Upstream commit d31fc13f ] There is a bug when reading event->count with large PEBS enabled. Here is an example: # ./read_count 0x71f0 0x122c0 0x1000000001c54 0x100000001257d 0x200000000bdc5 In fixed period mode, the auto-reload mechanism could be enabled for PEBS events, but the calculation of event->count does not take the auto-reload values into account. Anyone who reads event->count will get the wrong result, e.g x86_pmu_read(). This bug was introduced with the auto-reload mechanism enabled since commit: 851559e3 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Introduce intel_pmu_save_and_restart_reload() to calculate the event->count only for auto-reload. Since the counter increments a negative counter value and overflows on the sign switch, giving the interval: [-period, 0] the difference between two consequtive reads is: A) value2 - value1; when no overflows have happened in between, B) (0 - value1) + (value2 - (-period)); when one overflow happened in between, C) (0 - value1) + (n - 1) * (period) + (value2 - (-period)); when @n overflows happened in between. Here A) is the obvious difference, B) is the extension to the discrete interval, where the first term is to the top of the interval and the second term is from the bottom of the next interval and C) the extension to multiple intervals, where the middle term is the whole intervals covered. The equation for all cases is: value2 - value1 + n * period Previously the event->count is updated right before the sample output. But for case A, there is no PEBS record ready. It needs to be specially handled. Remove the auto-reload code from x86_perf_event_set_period() since we'll not longer call that function in this case. Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Kan Liang authored
[ Upstream commit f605cfca ] Large fixed period values could be truncated on Broadwell, for example: perf record -e cycles -c 10000000000 Here the fixed period is 0x2540BE400, but the period which finally applied is 0x540BE400 - which is wrong. The reason is that x86_pmu::limit_period() uses an u32 parameter, so the high 32 bits of 'period' get truncated. This bug was introduced in: commit 294fe0f5 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds") It's safe to use u64 instead of u32: - Although the 'left' is s64, the value of 'left' must be positive when calling limit_period(). - bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch the higher 32 bits. Signed-off-by:
-
Maurizio Lombardi authored
[ Upstream commit 2bbea6e1 ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
