- 30 Sep, 2013 32 commits
-
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
Many fields of struct policy are filled by cpufreq core when we call cpufreq_table_validate_and_show() and so cpufreq driver doesn't need to set them anymore. Signed-off-by:
-
Viresh Kumar authored
This patch exposes sa11x0's frequency table to cpufreq core. It always existed but not as an array frequencies and not in the format cpufreq core wants it to. Also it was present in the unit of 100kHz earlier which is made consistent with cpufreq core now, i.e. kHz. Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: John Crispin <blogic@openwrt.org> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Cc: Steven Miao <realmz6@gmail.com> Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by:
-
Viresh Kumar authored
This exposes frequency table of driver to cpufreq core and is required for core to guess what the index for a target frequency is, when it calls cpufreq_frequency_table_target(). And so this driver needs to expose it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Viresh Kumar authored
This exposes frequency table of driver to cpufreq core and is required for core to guess what the index for a target frequency is, when it calls cpufreq_frequency_table_target(). And so this driver needs to expose it. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Viresh Kumar authored
This exposes frequency table of driver to cpufreq core and is required for core to guess what the index for a target frequency is, when it calls cpufreq_frequency_table_target(). And so this driver needs to expose it. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Viresh Kumar authored
Almost every cpufreq driver is required to validate its frequency table with: cpufreq_frequency_table_cpuinfo() and then expose it to cpufreq core with: cpufreq_frequency_table_get_attr(). This patch creates another helper routine cpufreq_table_validate_and_show() that will do both these steps in a single call and will return 0 for success, error otherwise. This also fixes potential bugs in cpufreq drivers where people have called cpufreq_frequency_table_get_attr() before calling cpufreq_frequency_table_cpuinfo(), as the later may fail. Signed-off-by:
-
- 29 Sep, 2013 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for 3.12-rc3. These are all for host controller issues that have been reported, and there's a fix for an annoying error message that gets printed every time you remove a USB 3 device from the system that's been bugging me for a while" * tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: add support for Merrifield USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization USB: Fix breakage in ffs_fs_mount() fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA usb: chipidea: udc: free pending TD at removal procedure usb: chipidea: imx: Add usb_phy_shutdown at probe's error path usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal usb: chipidea: udc: fix the oops after rmmod gadget USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd USB: OHCI: accept very late isochronous URBs USB: UHCI: accept very late isochronous URBs USB: iMX21: accept very late isochronous URBs usbcore: check usb device's state before sending a Set SEL control transfer xhci: Fix race between ep halt and URB cancellation usb: Fix xHCI host issues on remote wakeup. xhci: Ensure a command structure points to the correct trb on the command ring xhci: Fix oops happening after address device timeout
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some serial at tty driver fixes for 3.12-rc3 The serial driver fixes some kref leaks, documentation is moved to the proper places, and the tty and n_tty fixes resolve some reported regressions. There is still one outstanding tty regression fix that isn't in here yet, as I want to test it out some more, it will be sent for 3.12-rc4 if it checks out" * tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: ar933x_uart: move devicetree binding documentation tty: Fix SIGTTOU not sent with tcflush() n_tty: Fix EOF push index when termios changes serial: pch_uart: remove unnecessary tty_port_tty_get serial: pch_uart: fix tty-kref leak in dma-rx path serial: pch_uart: fix tty-kref leak in rx-error path serial: tegra: fix tty-kref leak
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are some staging driver fixes, MAINTAINER updates, and a new device id. All of these have been in the linux-next tree, and are pretty simple patches" * tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Add new device ID staging: imx-drm: Fix probe failure staging: vt6656: [BUG] iwctl_siwencodeext return if device not open staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier. staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD. Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb staging: usbip: Orphan usbip staging: r8188eu: Add files for new drive: Cocci spatch "noderef" staging: r8188eu: Cocci spatch "noderef" staging: octeon-usb: Cocci spatch "noderef" staging: r8188eu: Add files for new drive: Cocci spatch "noderef" MAINTAINERS: staging: dgnc and dgap drivers: add maintainer staging: lustre: Cocci spatch "noderef"
-
Linus Torvalds authored
Merge tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / sysfs fixes from Greg KH: "Here are 2 fixes for 3.12-rc3. One fixes a sysfs problem with mounting caused by 3.12-rc1, and the other is a bug reported by the chromeos developers with the driver core. Both have been in linux-next for a bit" * tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core : Fix use after free of dev->parent in device_shutdown sysfs: Allow mounting without CONFIG_NET
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some HyperV and MEI driver fixes for 3.12-rc3. They resolve some issues that people have been reporting for them" * tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout Drivers: hv: util: Correctly support ws2008R2 and earlier mei: cancel stall timers in mei_reset mei: bus: stop wait for read during cl state transition mei: make me client counters less error prone
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf revert from Ingo Molnar: "This fixes the 'perf top' regression Markus Trippelsdorf reported" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "perf symbols: Demangle cloned functions"
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too major, radeon still has some dpm changes for off by default. Radeon, intel, msm: - radeon: a few more dpm fixes (still off by default), uvd fixes - i915: runtime warn backtrace and regression fix - msm: iommu changes fallout" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (27 commits) drm/msm: use drm_gem_dumb_destroy helper drm/msm: deal with mach/iommu.h removal drm/msm: Remove iommu include from mdp4_kms.c drm/msm: Odd PTR_ERR usage drm/i915: Fix up usage of SHRINK_STOP drm/radeon: fix hdmi audio on DCE3.0/3.1 asics drm/i915: preserve pipe A quirk in i9xx_set_pipeconf drm/i915/tv: clear adjusted_mode.flags drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER drm/radeon/cik: fix overflow in vram fetch drm/radeon: add missing hdmi callbacks for rv6xx drm/i915: Use a temporary va_list for two-pass string handling drm/radeon/uvd: lower msg&fb buffer requirements on UVD3 drm/radeon: disable tests/benchmarks if accel is disabled drm/radeon: don't set default clocks for SI when DPM is disabled drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables drm/radeon/dpm: fetch the max clk from voltage dep tables helper ...
-
